Data Sheet 29304.3E* 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS 1 18 2 17 3 16 4 15 5 14 6 13 7 12 8 11 9 10 Dwg. No. A-10,322A Note that the ULx28xxA series (dual in-line package) and ULx28xxLW series (smalloutline IC package) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS Output Voltage, VCE (x2803x and x2804x) ..................... 50 V (x2823x and x2824x) ..................... 95 V Input Voltage, VIN .............................. 30 V Continuous Output Current, IC .... 500 mA Continuous Input Current, IIN ....... 25 mA Power Dissipation, PD (one Darlington pair) .................. 1.0 W (total package) ..................... See Graph Operating Temperature Range, TA Prefix `ULN' .............. -20C to + 85C Prefix `ULQ' ............... -40C to +85C Storage Temperature Range, TS ................................ -55C to +150C Featuring continuous load current ratings to 500 mA for each of the drivers, the Series ULN28xxA/LW and ULQ28xxA/LW highvoltage, high-current Darlington arrays are ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads. Typical power loads totaling over 260 W (350 mA x 8, 95 V) can be controlled at an appropriate duty cycle depending on ambient temperature and number of drivers turned on simultaneously. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The ULx2803A, ULx2803LW, ULx2823A, and ULN2823LW have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs -- particularly those beyond the capabilities of standard logic buffers. The ULx2804A, ULx2804LW, ULx2824A, and ULN2824LW have series input resistors for operation directly from 6 V to 15 V CMOS or PMOS logic outputs. The ULx2803A/LW and ULx2804A/LW are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the off state. Outputs may be paralleled for higher load current capability. The ULx2823A/LW and ULx2824A/ LW will withstand 95 V in the off state. These Darlington arrays are furnished in 18-pin dual in-line plastic packages (suffix `A') or 18-lead small-outline plastic packages (suffix `LW'). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. Prefix `ULN' devices are rated for operation over the temperature range of -20C to +85C; prefix `ULQ' devices are rated for operation to -40C. FEATURES TTL, DTL, PMOS, or CMOS Compatible Inputs Output Current to 500 mA Output Voltage to 95 V Transient-Protected Outputs Dual In-Line Package or Wide-Body Small-Outline Package The ULx2804, ULx2823, & ULx2824 are last-time buy. Orders accepted until October 19, 2001. x = Character to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page. 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS DEVICE PART NUMBER DESIGNATION VCE(MAX) 50 V 95 V IC(MAX) 500 mA 500 mA Logic Part Number 5V TTL, CMOS ULN2803A* ULN2803LW* ULN2823A* ULN2823LW 6-15 V CMOS, PMOS ULN2804A* ULN2804LW* ULN2824A* ULN2824LW *Also available for operation between -40C and +85C. To order, change prefix from `ULN' to `ULQ'. PARTIAL SCHEMATICS The ULx2804, ULx2823, & ULx2824 are last-time buy. Orders accepted until October 19, 2001. 2.7 K 7.2 K 3K Dwg. FP-052-2 ULx28x4A/LW (Each Driver) 10.5 K ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS ULx28x3A/LW (Each Driver) 2.5 2.0 SUFFIX 'A', R JA = 60C/W 1.5 1.0 SUFFIX 'LW', R 0.5 0 25 JA = 80C/W 50 75 100 125 AMBIENT TEMPERATURE IN C 7.2 K 150 Dwg. GP-018B 3K Dwg. FP-052-3 x = Character to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above. 2 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright (c) 1977, 2001 Allegro MicroSystems, Inc. 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Types ULx2803A, ULx2803LW, ULx2804A, and ULx2804LW ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted). Characteristic Output Leakage Current Collector-Emitter Saturation Voltage Symbol Test Fig. Applicable Devices ICEX 1A All VCE(SAT) Input Current Input Voltage IIN(ON) Min. VCE = 50 V, TA = 25C -- <1 50 A VCE = 50 V, TA = 70C -- <1 100 A VCE = 50 V, TA = 70C, VIN = 1.0 V -- <5 500 A IC = 100 mA, IB = 250 A -- 0.9 1.1 V lC = 200 mA, IB = 350 A -- 1.1 1.3 V IC = 350 mA, IB = 500 A -- 1.3 1.6 V ULx2803x VIN = 3.85 V -- 0.93 1.35 mA ULx2804x VIN = 5.0 V -- 0.35 0.5 mA VIN = 12 V -- 1.0 1.45 mA lC = 500 A, TA = 70C 50 65 -- A VCE = 2.0 V, lC = 200 mA -- -- 2.4 V VCE = 2.0 V, IC = 250 mA -- -- 2.7 V VCE = 2.0 V, lC = 300 mA -- -- 3.0 V VCE = 2.0 V, lC = 125 mA -- -- 5.0 V VCE = 2.0 V, lC = 200 mA -- -- 6.0 V VCE = 2.0 V, IC = 275 mA -- -- 7.0 V VCE = 2.0 V, lC = 350 mA -- -- 8.0 V -- 15 25 pF 1B ULx2804x 2 All 3 Limits Typ. Max. Test Conditions IIN(OFF) 4 All VIN(ON) 5 ULx2803x ULx2804x Units Input Capacitance CIN -- All Turn-On Delay tPLH 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Turn-Off Delay tPHL 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Clamp Diode Leakage Current IR 6 All VR = 50 V, TA = 25C -- -- 50 A VR = 50 V, TA = 70C -- -- 100 A Clamp Diode Forward Voltage VF IF = 350 mA -- 1.7 2.0 V 7 All Complete part number includes prefix to operating temperature range: ULN = -20C to +85C, ULQ = -40C to +85C and a suffix to identify package style: A = DIP, LW = SOIC. The ULx2804 is last-time buy. Orders accepted until October 19, 2001. www.allegromicro.com 3 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Types ULx2823A, ULN2823LW, ULx2824A, and ULN2824LW ELECTRICAL CHARACTERISTICS at +25C (unless otherwise noted). Characteristic Output Leakage Current Collector-Emitter Saturation Voltage Input Current Input Voltage Symbol Test Fig. Applicable Devices ICEX 1A All VCE(SAT) IIN(ON) Min. VCE = 95 V, TA = 25C -- <1 50 A VCE = 95 V, TA = 70C -- <1 100 A VCE = 95 V, TA = 70C, VIN = 1.0 V -- <5 500 A IC = 100 mA, IB = 250 A -- 0.9 1.1 V lC = 200 mA, IB = 350 A -- 1.1 1.3 V IC = 350 mA, IB = 500 A -- 1.3 1.6 V ULx2823x VIN = 3.85 V -- 0.93 1.35 mA ULx2824x VIN = 5.0 V -- 0.35 0.5 mA VIN = 12 V -- 1.0 1.45 mA lC = 500 A, TA = 70C 50 65 -- A VCE = 2.0 V, lC = 200 mA -- -- 2.4 V VCE = 2.0 V, IC = 250 mA -- -- 2.7 V VCE = 2.0 V, lC = 300 mA -- -- 3.0 V VCE = 2.0 V, lC = 125 mA -- -- 5.0 V VCE = 2.0 V, lC = 200 mA -- -- 6.0 V VCE = 2.0 V, IC = 275 mA -- -- 7.0 V VCE = 2.0 V, lC = 350 mA -- -- 8.0 V -- 15 25 pF 1B ULx2824x 2 All 3 Limits Typ. Max. Test Conditions IIN(OFF) 4 All VIN(ON) 5 ULx2823x ULx2824x Units Input Capacitance CIN -- All Turn-On Delay tPLH 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Turn-Off Delay tPHL 8 All 0.5 EIN to 0.5 EOUT -- 0.25 1.0 s Clamp Diode Leakage Current IR 6 All VR = 95 V, TA = 25C -- -- 50 A VR = 95 V, TA = 70C -- -- 100 A Clamp Diode Forward Voltage VF IF = 350 mA -- 1.7 2.0 V 7 All Complete part number includes prefix to operating temperature range: ULN = -20C to +85C, ULQ = -40C to +85C and a suffix to identify package style: A = DIP, LW = SOIC. Note that the ULQ2823LW and ULQ2824LW are not presently available. The ULx2823 & ULx2824 are last-time buy. Orders accepted until October 19, 2001. 4 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS TEST FIGURES FIGURE 1A FIGURE 1B OPEN VCE FIGURE 2 VCE OPEN A I hFE = C IB A ICEX OPEN OPEN ICEX VIN V IB Dwg. No. A-9729A IC VCE Dwg. No. A-9730A FIGURE 3 Dwg. No. A-9731A FIGURE 4 OPEN FIGURE 5 VCE OPEN OPEN A IIN IIN mA OPEN IC A VIN VIN V V VCE Dwg. No. A-9732A Dwg. No. A-9733A FIGURE 6 IC Dwg. No. A-9734A FIGURE 7 FIGURE 8 VR A IR OPEN OPEN +50 V IF V VF PULSE GENERATOR PRR = 10 kHz DC = 50 % INPUT 93 100 OUT 30 50 pF Dwg. EP-072 Dwg. No. A-9735A Dwg. No. A-9736A Vin ULx28x3x ULx28x4x www.allegromicro.com 3.5 V 12 V 5 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE ULx28xxA ULx28xxLW 600 2 3 400 4 5 8 7 6 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +50C RJA = 60C/W OUTPUT CURRENT IN mA/CHANNEL OUTPUT CURRENT IN mA/CHANNEL 600 0 2 400 3 4 5 6 7 8 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +50C RJA = 80C/W 0 0 20 40 60 80 100 0 20 DUTY CYCLE IN PER CENT 40 60 80 100 DUTY CYCLE IN PER CENT Dwg. GP-070-2 Dwg. GP-070-4 600 600 1 OUTPUT CURRENT IN mA/CHANNEL OUTPUT CURRENT IN mA/CHANNEL 1 2 400 3 4 5 6 8 7 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70C RJA = 60C/W 0 2 400 3 4 5 6 8 7 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70C RJA = 80C/W 0 0 20 40 60 80 100 DUTY CYCLE IN PER CENT 0 20 40 60 80 Dwg. GP-070-1 x = Characters to identify specific device. Specification shown applies to family of devices with remaining digits as shown. 6 100 DUTY CYCLE IN PER CENT 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 Dwg. GP-070-3 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS INPUT CURRENT AS A FUNCTION OF INPUT VOLTAGE SATURATION VOLTAGE AS A FUNCTION OF COLLECTOR CURRENT ULx28x3x 600 2.5 UM IM X MA 1.5 PIC AL TY 1.0 0.5 400 TY PI M CA AX L .S AT UR AT IO N VO LT AG E COLLECTOR CURRENT IN mA INPUT CURRENT IN mA -- I IN 2.0 200 AREA OF NORMAL OPERATION WITH STANDARD OR SCHOTTKY TTL 0 0 2.0 3.0 4.0 5.0 6.0 0 0.5 1.0 1.5 INPUT VOLTAGE Dwg. GP-069 Dwg. GP-067 COLLECTOR CURRENT AS A FUNCTION OF INPUT CURRENT ULx28x4x 600 L A TYPIC 0.5 0 5 6 7 8 9 10 11 12 INPUT VOLTAGE Dwg. GP-069-1 CA L UM XIM MA 1.0 400 PI COLLECTOR CURRENT IN mA 1.5 TY 2.0 INPUT CURRENT IN mA -- IIN 2.0 COLLECTOR-EMITTER SATURATION VOLTAGE 'D EQ .R X A M 200 T PU IN T EN RR U C 0 0 200 400 600 INPUT CURRENT IN A Dwg. GP-068 x = Characters to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. www.allegromicro.com 7 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS PACKAGE DESIGNATOR "A" DIMENSIONS Dimensions in Inches (controlling dimensions) 18 0.014 0.008 10 0.430 MAX 0.280 0.240 0.300 BSC 1 0.070 0.045 0.100 0.920 0.880 9 0.005 BSC MIN 0.210 MAX 0.015 0.150 0.115 MIN 0.022 0.014 Dwg. MA-001-18A in Dimensions in Millimeters (for reference only) 0.355 0.204 10 18 10.92 MAX 7.11 6.10 7.62 BSC 1 1.77 1.15 2.54 23.37 22.35 9 0.13 BSC MIN 5.33 MAX 0.39 3.81 2.93 MIN 0.558 0.356 Dwg. MA-001-18A mm NOTES: 1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. 3. Lead thickness is measured at seating plane or below. 8 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS PACKAGE DESIGNATOR "LW" DIMENSIONS Dimensions in Inches (for reference only) 18 10 0.0125 0.0091 0.419 0.394 0.2992 0.2914 0.050 0.016 0.020 0.013 1 2 0.050 3 0 TO 8 BSC 0.4625 0.4469 0.0926 0.1043 0.0040 MIN. Dwg. MA-008-18A in Dimensions in Millimeters (controlling dimensions) 18 10 0.32 0.23 10.65 10.00 7.60 7.40 1.27 0.40 0.51 0.33 1 2 1.27 3 11.75 11.35 BSC 0 TO 8 2.65 2.35 0.10 MIN. Dwg. MA-008-18A mm NOTES: 1. Exact body and lead configuration at vendor's option within limits shown. 2. Lead spacing tolerance is non-cumulative. www.allegromicro.com 9 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS The products described here are manufactured under one or more U.S. patents or U.S. patents pending. Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use. 10 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000