www.national.com 2 Product Overview
Highlights (Continued)
Features
General Features
• Packaged in:
- 352-Terminal Ball Grid Array (BGA) or
- 320-Pin Staggered Pin Grid Array (SPGA)
• 0.35-micron four layer metal CMOS process
• Split rail design (3.3V I/O and 2.9V core)
64-Bit x86 Processor
• Supports the MMX™ instruction set extension for the
acce leration of multimedia app lic ations
• Speeds offered up to 300 MHz
• 16 KB unified L1 cache
• Integrated Floating Point Unit (FPU)
• Re-entrant System Management Mode (SMM)
enhanced for VSA
PCI Controller
• Fixed, rotating, hybrid, or ping-pong arbitration
• Supports up to three PCI bus masters
• Synchronous CPU and PCI bus clock frequency
• Supports concurrency between PCI master and L1
cache
Power Management
• Designed to support 5530 power management
architecture
• CPU only Suspend or full 3V Suspend supported:
- Clocks to CPU core stopped for CPU Suspend
- All on-chip clocks stopped for 3V Suspend
- Suspend refresh supported for 3V Suspend
Virtual Systems Architecture Technology
• Architecture allows OS independent (software) virtual-
ization of hardware functions
• Provi des c ompa tib le hi gh pe rf o rmance lega cy VGA core
functionality
Note: GUI (Graphical User Interface) graphics acceler-
ation is pure hardware.
• Provides 16-bit XpressAUDIO subsystem
2D Graphics Accelerator
• Graphics pipeline performance significantly increased
over previous generations by pipelining burst
reads/writes
• Accelerates BitBLTs, line draw, text
• Supports all 256 raster operations
• Supports transparent BLTs
• Runs at core clock frequency
• Full VGA and VESA mode support
• Special "Driver level” instructions utilize internal
scratchpad for enhanced performance
Display Contro ller
• Video Generator (VG) improves memory efficiency for
display refresh with SDRAM
• Suppo rts a separate MPEG1 v ide o buffer a nd data pat h
to enable video acceleration in the 5530
• Internal palette RAM for use with the 5530
• Direct interface to 5530 for CRT and TFT flat panel
support which eliminates need for external RAMDAC
• Hardware frame buffer compressor/decompressor
• Hardware cursor
• Suppo rts up to 1280x1024x 8 b pp and 1024x768x16 bpp
XpressRAM™ Subsystem
• Memory control/interface directly from CPU
• 64-Bit wide memory bus
• Support for:
- Two 168-pin unbuffered DIMMs
- Up to 16 open banks simultaneously
- Single or 16-byte reads (burst length of two)