5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier February 2007 - Rev 02-Feb-07 CMM0511-QT Features 20 dB Gain 11 dBm P1dB 3x3 QFN Package Single Power Supply 5-7 V, 90 mA Self Bias On-Chip ESD Protection Circuit Description Mimix Broadband's 3 stage 5.0 to 14.0 GHz driver amplifier is packaged in surface mount 3x3 QFN package. The device is a self-biased, single supply design with 20 dB gain and 11 dBm P1dB. This MMIC uses Mimix Broadband's 0.25um optical pHEMT process. Absolute Maximum Ratings Supply Voltage RF Input Power Storage Temperature (Tstg) Junction Temperature Operating Temperature +8 V +10 dBm -55 C to +125 C 175 C -40 C to +85C Operating this device beyond any of these parameters may cause permanent damage. Electrical Characteristics (T=25C) Parameter Units GHz dB Frequency Range Gain Input Return Loss Output P1dB Output IP3 Supply Voltage Current dBm dBm V mA Min. 5 - Typ. 20 -12 11 22 5 90 Max. 14 7 120 Typical 9 11 18.5 18.5 -17 -20 -11 -11 10 10 22.0 20.0 13 18.5 -10 -9 10 21.0 Typical Parameters (6V, 90 mA) Parameter Frequency Gain IP Return Loss Op Return Loss P1dB OIP3 5 20.5 -15 -14.5 13 24.0 7 20.5 -15 -15 13 24.0 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 14 20 -8 -9 11.5 20.5 Page 1 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier February 2007 - Rev 02-Feb-07 CMM0511-QT Driver Amplifier Measurements CMM0511-QT, Small Signal, 6V, 102mA CMM0511-QT Gain Vs Frequency Vs Voltage S21 S11 S12 S22 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 26 24 S21 (dB) S21 (dB) 22 20 18 16 S21 (4V) 14 S21 (5V) S21 (6V) 12 10 0 2 4 6 8 10 12 14 16 18 20 4 6 8 10 Frequency (GHz) 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 -22 -24 -26 -28 -30 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -20 -22 -24 -26 -28 -30 S11 (4V) S11 (5V) S11 (6V) 6 8 10 14 16 CMM0511-QT Output Return Loss Vs Frequency Vs Voltage S11 (dB) S11 (dB) CMM0511-QT Input Return Loss Vs Frequency Vs Voltage 4 12 Frequency (GHz) 12 16 14 S22 (4V) S22 (5V) S22 (6V) 6 4 8 Frequency (GHz) 10 12 16 14 Frequency (GHz) CMM0511-QT Pout Vs Pin CMM0511-QT Vd = 5V, 90mA 20 20 18 18 5GHz 16 16 7GHz 14 Pout (dBm) Pout (dBm) 14 9GHz 12 11GHz 10 13GHz 8 14GHz 12 10 8 Psat 6 6 4 4 2 2 0 0 -20 -18 -16 -14 -12 -10 Pin (dBm) -8 -6 -4 -2 4 5 6 7 8 9 10 11 12 13 14 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 15 5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier February 2007 - Rev 02-Feb-07 CMM0511-QT Driver Amplifier Measurements (cont.) Gain Vs Frequency Vs Temperature 5V, 90mA Gain Vs Frequency Vs Temperature 6V, 90mA 25 Gain @ 25degC 24 Gain @ 25degC 23 Gain @ -40degC 23 Gain @ -40degC 22 Gain @ 80degC 22 Gain @ 80degC 21 Gain (dB) Gain (dB) 25 24 20 19 21 20 19 18 18 17 17 16 16 15 15 4 5 6 7 8 9 10 11 12 13 14 15 4 5 6 7 8 Frequency (GHz) P1dB @ 25degC P1dB @ -40degC P1dB @ 80degC 5 6 7 8 9 10 11 12 13 14 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 15 13 P1dB @ -40degC 5 6 7 8 9 10 11 12 13 OIP3 Vs Frequency Vs Temperature 6V, 90mA OIP3 @ -40degC OIP3 @ 80degC 7 8 9 10 11 Frequency (GHz) 15 P1dB @ 80degC OIP3 Vs Frequency Vs Temperature 5V, 90mA 6 14 P1dB @ 25degC 4 OIP3 @ 25degC 5 12 Frequency (GHz) 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 4 11 Frequency (GHz) OIP3 (dBm) OIP3 (dBm) 4 10 P1dB Vs Frequency Vs Temperature 6V, 90mA Pout (dBm) Pout (dBm) P1dB Vs Frequency Vs Temperature 5V, 90mA 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 9 Frequency (GHz) 12 13 14 15 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 15 OIP3 @ 25degC OIP3 @ -40degC OIP3 @ 80degC 4 5 6 7 8 9 10 11 12 13 14 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 15 5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier February 2007 - Rev 02-Feb-07 CMM0511-QT Evaluation Board Layout Package Pin-out Table Pin Designator 1,2,4,5,6,7,8,9, 11,12,14,15,16 3 10 13 Description NC RF Input RF Output Vd C1 = 1000pF C2 = 1F We recommend to ground all non-connected pins and to have as many via holes as possible under the ground paddle. Evaluation Board Schematic Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier CMM0511-QT February 2007 - Rev 02-Feb-07 Package Outline and Assembly PIN 1 INDICATOR A D A2 0511G XXXX XXYY E 0.00-0.05 A3 RECOMMENDED SOLDER PAD PITCH AND DIMENSIONS 1.00 .005 2.00 .05 1.40 .05 (4 SIDES) 4.00 .05 PACKAGE OUTLINE NOTE: 1. ALL DIMENSIONS ARE IN mm A A3 A2 b K D E e D2 E2 L MIN 0.80 0 0.20 0.20 1.50 1.50 0.16 NOM 0.90 0.20 REF 0.65 0.25 3.00 BSC 3.00 BSC 0.50 1.65 1.65 0.26 MAX 1.00 1.00 0.30 - 1.80 1.80 0.36 0.30 .005 0.50 BSC Ordering Information Part Number for Ordering CMM0511-QT-0G00 CMM0511-QT-0G0T PB-CMM0511-QT-0000 Description Matte Tin finished RoHS compliant 3x3 QFN in bulk quantity Matte Tin finished RoHS compliant 3x3 QFN in tape and reel Evaluation Board Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 5.0-14.0 GHz GaAs MMIC Packaged Driver Amplifier February 2007 - Rev 02-Feb-07 CMM0511-QT Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter "G" will be used in the part number for Matte Tin finished RoHSCompliant components and "L" will be used in the part number of NiPdAu finished RoHS Compliant components in the second position of the part number suffix, as shown below: Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts For those customers not making the change at this time, Mimix/Celeritek will maintain production of current configurations. For questions and comments e-mail: ourearth@mimixbroadband.com. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 6 Characteristic Data and Specifications are subject to change without notice. (c)2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.