SPDT Medium Power Switches With Drivers 2665 Series Features @B Octave Bands to 18 GHz m 10 Watts CW m TTL Compatible @ Environmentally Sealed Description M/A-COM's medium power PIN diode switches cover octave bandwidths from 2 to 18 GHz. All diodes are shunt-mounted to the housing for superior heat sinking. The circuit and bias structure are designed to withstand higher signal levels without compromising RF performance. All solder construction and thermal compression bond- ing techniques ensure reliable operation in hostile environments. Typical insertion loss, VSWR, and isolation curves are shown below. Environmental! These devices are designed to meet the following conditions: Mechanical Outline 2-4 and 4-8 GHz | i 200 | (50 8) = coNn 46ND 4 f 12 (30) DIA THR5 HOLE @ PLACES) 8-12 and 12-18 GHz ~ 145 39.6) 2 (30 D4, | 80 / 18 Test MIL-STD Method Cond THRU HOLE | Po 3 / : 8 Z PLACES) J\) i / oe . TI Tro) ot Temperature Cycle 883 1010 Cc 0 i : | 1 O}) 150 - _. _ _ ne (23 60 VP | i384 52 3 Const. Acceleration 883 2001 A : 2 4+ ao er 25 7YP = 160 -~ le So {6 35) (406) Mo Vibration 202 214 me en Solvent Resistance 883 2015 Salt Spray 202 101 A Moisture Resistance 202 106 Maximum Ratings Storage Temp. -65C to +125C Operating Temp. -55C to +95C Specifications Subject to Change Without Notice. M/A-COM Inc. . 1011 Pawtucket Boulevard, Lowell, MA 01853 USA a Telephone: 800-366-2266 4-18SPDT Medium Power Switches With Drivers 2665 Series 2665-Series Specifications 25C Frequency Insertion Isolation Transition Switching Operating Range (GHz) Loss (dB) VSWR (dB) Time (nS) Speed (nS) Power (W) Part Number 2-4 1.6 1.70:1 55 150 200 10 2665-1002-XY 4-8 2.0 1.90:1 55 150 200 10 2665-1004-XY 8-12 2.5 2.00:1 55 150 200 10 2665-1006-XY 12-18 2.4 2.20:1 40 150 200 10 2665-1007-XY Notes: . . |. Driver current req. + 90mA typ. - XY Option Table 2. Logic "0" for low loss. 3. Transition Time measured from 10% to x Y 90% of detected RF. Bias Voltage Logic Conn. 4. Switch Speed measured from 50% TTL to 10%/90% detected RF. ) +5V/-12 0 Solder Pin 5. Specify voltage and logic connector from option table. i +5V/-5V | SMC Conn. 2 +15V/-15SV 2 SMAConn. 3 +12V/-12V 4 +5 V/-15V Specifications Subject to Change Without Notice. M/A-COM Inc. o 1011 Pawtucket Boulevard, Lowell, MA 01853 USA . Telephone: 800-366-2266 4-19