Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
200214 Rev. B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. February 13, 2008 1
AA264-87, AA264-87LF: GaAs IC 4-Bit Digital Attenuator
2 dB LSB Positive Control 0.5–2 GHz
DATA SHEET
Features
Attenuation 2 dB steps to 30 dB with high accuracy
Single positive control for each bit
Low DC Power consumption
Small, low-cost TSSOP-16 plastic package
Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
Description
The AA264-87 is a 4-bit, single positive control GaAs IC FET dig-
ital attenuator in a low-cost TSSOP-16 package. The attenuator
requires external DC blocking capacitors, positive supply voltage
(VS) and four individual positive control voltages (V1–V4). The
AA264-87 is particularly suited where high attenuation accuracy,
low insertion loss and low intermodulation products are required.
Typical applications include base station, wireless data and wire-
less local loop gain control circuits.
1 2 3 4 5 6 8
16 15 14 13 12 11 9
7
10
16 dB
8dB
4 dB
2 dB
GND
V4
V3
V2
J1
GND
GND
GND
GND
GND
GND
GND
GND
GND
V1
J2
CBL
CBL
VS
10 k
Pin Out
DC blocking capacitors (CBL) and biasing resistor must be supplied externally for positive
voltage operation.
CBL = 47 pF for operation >500 MHz.
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
NEW
Innovation to GoTM
Now available for purchase online.
BUY
NOW
BUY
NOW
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
February 13, 2008 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200214 Rev. B
DATA SHEET AA264-87, AA264-87LF
2
Parameter Condition Frequency Min. Typ. Max. Unit
Insertion loss 0.5–1.0 GHz 1.6 2.0 dB
1.0–2.0 GHz 1.8 2.4 dB
Attenuation range 30 dB
Attenuation accuracy 0.5–1.0 GHz ± (0.2 + 3% of attenuation dB
setting in dB)
1.0–2.0 GHz ± (0.3 + 5% of attenuation dB
setting in dB)
1.0–2.0 GHz ± (0.3 + 6% of attenuation dB
setting in dB)
VSWR (Input/Output) 0.5–0.8 GHz 1.8:1 2.2:1
0.8–2.0 GHz 1.5:1 2.0:1
Switching characteristics T = 25 °C
Rise, fall 10/90% or 90/10% RF 150 ns
On, off 50% CTL to 90/10% RF 300 ns
Video feedthru TRISE = 1 ns, BW = 500 MHz 70 mV
Input power for 1 dB compression VS= 3 V 0.5–2.0 GHz 15 21 dBm
VS= 5 V 0.5–2.0 GHz 21 27 dBm
Intermodulation intercept point (IP3) For two-tone input power 5 dBm
VS= 3 V 0.5–2.0 GHz 36 44 dBm
VS= 5 V 0.5–2.0 GHz 37 45 dBm
Control voltages VLOW 0 0.2 V
VHIGH 3 5.0 V
Supply voltages VCTL = 5 V VHIGH-0.2 VHIGH+0.2 V
Control port current VCTL = VLOW 20 µA
VCTL = 3 V 100 µA
VCTL = 5 V 200 µA
Electrical Specifications
-40 °C < T < +85 °C, ZO= 50 , VCTL = 0/5 V, unless otherwise specified.
DATA SHEET AA264-87, AA264-87LF
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
200214 Rev. B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. February 13, 2008 3
Insertion Loss (dB)
Frequency (GHz)
Insertion Loss vs. Frequency
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0 0.5 1.0 1.5 2.0 2.5 3.0
25 °C
85 °C
-40 °C
IP3 (dBm)
Attenuation (dB)
IP3 vs. Attenuation and
Temperature (500 MHz)
35
40
45
50
55
60
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
25 °C
85 °C
-40 °C
VSWR vs. Frequency (25 ˚C)
VSWR
0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency (GHz)
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Ins. Loss
2 dB
4 dB
8 dB
16 dB
30 dB
Ins. Loss
2 dB
4 dB
8 dB
16 dB
30 dB
VSWR vs. Frequency (85 ˚C)
VSWR
0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency (GHz)
1.0
1.2
1.4
1.6
1.8
2.0
2.2
VSWR
Frequency (GHz)
VSWR vs. Frequency (-40 ˚C)
0 0.5 1.0 1.5 2.0 2.5 3.0
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Ins. Loss
2 dB
4 dB
8 dB
16 dB
30 dB
Typical Performance Data
ZO= 50 , VCTL = 0/5 V, unless otherwise specified.
Compression Point vs. Attenuation, Voltage,
and Temperature
Attenuation Control Input Power @ 1 dB Compression
State Voltage (V) 25 °C (dBm) 85 °C (dBm) -40 °C (dBm)
Ins. Loss 5 29 28.9 29
2 dB 5 28.3 28.1 28.1
4 dB 5 35.2 34.7 35
8 dB 5 25.8 25.3 25.4
16 dB 5 21.7 21.3 21.6
30 dB 5 24.4 23.2 27.2
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
February 13, 2008 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200214 Rev. B
DATA SHEET AA264-87, AA264-87LF
4
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy vs. Frequency (25 ˚C)
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy vs. Frequency (85 ˚C)
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Insertion Phase (Deg.)
Frequency (GHz)
Attenuation Phase Accuracy
vs. Frequency (25 °C)
-15
-5
5
15
25
35
45
55
65
75
85
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Insertion Phase (Deg.)
Frequency (GHz)
Attenuation Phase Accuracy 
vs. Frequency (85 ˚C)
-15
-5
5
15
25
35
45
55
65
75
85
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy
vs. Frequency (-40 ˚C)
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Insertion Phase (Deg.)
Frequency (GHz)
Attenuation Phase Accuracy 
vs. Frequency (-40 ˚C)
-15
-5
5
15
25
35
45
55
65
75
85
2 dB
4 dB
8 dB
16 dB
30 dB
DATA SHEET AA264-87, AA264-87LF
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
200214 Rev. B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. February 13, 2008 5
Insertion Loss (dB)
Frequency (GHz)
Insertion Loss vs. Frequency
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0 0.5 1.0 1.5 2.0 2.5 3.0
25 °C
85 °C
-40 °C
VSWR vs. Frequency (25 ˚C)
VSWR
0 0.5 1.0 1.5 2.0 2.5 3.0
Frequency (GHz)
Ins. Loss
2 dB
4 dB
8 dB
16 dB
30 dB
1.0
1.2
1.4
1.6
1.8
2.0
2.2
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy vs. Frequency (25 ˚C)
-4.0
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy vs. Frequency (85 ˚C)
-4.5
-4.0
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
0 0.5 1.0 1.5 2.0 2.5 3.0
Deviation from Nominal
Insertion Phase (dB)
Frequency (GHz)
Attenuation Phase Accuracy
vs. Frequency (25 ˚C)
-10
0
10
20
30
40
50
60
70
80
90
2 dB
4 dB
6 dB
8 dB
30 dB
Deviation from Nominal
Attenuation (dB)
Frequency (GHz)
Attenuation Accuracy vs. Frequency (-40 ˚C)
0 0.5 1.0 1.5 2.0 2.5 3.0
-3.5
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0
0.5
1.0
2 dB
4 dB
8 dB
16 dB
30 dB
Typical Performance Data (0, 3 V)
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
February 13, 2008 Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. 200214 Rev. B
DATA SHEET AA264-87, AA264-87LF
6
Truth Table
V1V2V3V4Attenuation
16 dB 8 dB 4 dB 2 dB J1–J2
VHIGH VHIGH VHIGH VHIGH Reference I.L.
VHIGH VHIGH VHIGH 0 2 dB
VHIGH VHIGH 0V
HIGH 4 dB
VHIGH 0V
HIGH VHIGH 8 dB
0V
HIGH VHIGH VHIGH 16 dB
00 0 030 dB max. atten.
VHIGH = 3 to 5 V (VS= VHIGH ± 0.2 V).
Characteristic Value
RF input power 1 W > 500 MHz 0/8 V
0.5 W @ 50 MHz 0/8 V
Supply voltage 8 V
Control voltage -0.2 V, +8 V
Operating temperature -40 °C to +85 °C
Storage temperature -65 °C to +150 °C
Absolute Maximum Ratings
IP3 (dBm)
Attenuation (dB)
IP3 vs. Attenuation and
Temperature (500 MHz)
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30
37
39
41
43
45
47
49
51
53
55
57
25 °C
85 °C
-40 °C
Compression Point vs. Attenuation, Voltage,
and Temperature
Attenuation Control Input Power @ 1 dB Compression
State Voltage (V) 25 °C (dBm) 85 °C (dBm) -40 °C (dBm)
Ins. Loss 3 21.7 21.6 22.6
2 dB 3 21.2 20.7 21.4
4 dB 3 34.3 31 34.3
8 dB 3 33.6 23 32.9
16 dB 3 18 17 21.4
30 dB 3 22.4 21.2 24.1
TSSOP-16
0.173 (4.40 mm)
± 0.004 (0.10 mm)
0.197 (5.00 mm)
± 0.004 (0.10 mm)
0.252 (6.4 mm)
BSC
Pin 16
Pin 1
Indicator
Pin 1
0.006 (0.15 mm) Max.
0.002 (0.05 mm) Min.
0.047 (1.20 mm)
Max.
0.035 (0.90 mm)
+ 0.006 (0.15 mm) /
-0.004 (-0.10 mm)
0.0256 (0.65 mm)
BSC
0.009 (0.22 mm) Ref.
R 0.004 (0.09 mm)
Min.
0.024
(0.60 mm)
± 0.006
(0.15 mm)
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Recommended Solder Reflow Profiles
Refer to the Recommended Solder Reflow Profile”
Application Note.
DATA SHEET AA264-87, AA264-87LF
Skyworks Solutions, Inc. Phone [781] 376-3000 Fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com
200214 Rev. B Skyworks Proprietary Information Products and Product Information are Subject to Change Without Notice. February 13, 2008 7
Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.