94X Series (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E) Ultrasonic Distance Sensors DESCRIPTION This collection of ultrasonic devices offers enhanced sensing range capability in a square plastic housing. Available sensor types include programmable, Teach-In, and analogue and fixed output versions. FEATURES * * Non contact distance sensing for use in non invasive * Level measurement measurement * Presence/absence detection Reduced sensitivity to light intensity/reflectivity/opacity of * Distance measurement target for enhanced flexibility and certainty of measurement * Detects over much longer distance than other detection methods reducing the need for close proximity to the target * POTENTIAL APPLICATIONS Extremely long sensing distance (up to 6 m [19.65 ft]) reducing the need for close proximity measurement which can be critical for some applications 943 Series (942-O4N-2D-1A1/1A2-80E, 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E) Specifications Parameter 942-O4N-2D1A1-80E Max. sensing distance Min. sensing distance Expected response time 90% of final value Beam angle Switching frequency Linearity error Hysteresis Repeatability of measured distance Temperature range Temperature compensation Operating voltage Expected current consumption Analogue output Analogue output selection by load Switching outputs Expected output current Adjustment Alignment LED Status switching output 1 Status switching output 2 Control input Inhibit connect to: Synchronisation connect to: Enable connect to: Interface Plastic housing Sealing* Connector 942-O4N-2D1A2-80E 943-O4V-2D001-80E 943-O4V-2D002-80E 250 ms/prog 6000 mm [236.22 in] 600 mm [23.62 in] - 7 Hz/prog <0.3% prog 0.2% 8 0.5 Hz - ~1% - 943-O4V-2D1C0-80E 943-O4V-2D1D0-80E 700 ms 10 7 Hz/prog <0.5 % - 0.2% 2 mm [0.08 in] 0.2% -15 C to 70 C [-5 F to 158 F] yes 12 Vdc to 30 Vdc 15 Vdc to 30 Vdc <80 mA <35 mA - 0 V to 10 V 4 mA to 20 mA - 15 Vdc to 30 Vdc 100 mA 0 V to 10 V/4 mA to 20 mA load >2 kOhm Uout load <500 Ohm Iout 2 PNP NO/NC 2 NPN NO/NC 2 PNP NO/NC 2 NPN NO/NC 100 mA max. 500 mA max. programming Teach-In green (1) yellow (2) yellow (3) - Pin 6 0 V Pin 6 Pin 6 Pin 6 NC RS232 - - Pin 2 0 V Pin 2 Pin 2 Pin 2 NC - PBPT IP65 8 pin M16x0.75 5 pin M12x1 Accessories: 942-O4N-2D-1A1/1A2-80E Catalog Listing Description 66195126-001 Mating connector straight 55000005-002 Programming adaptor 55000010-001 Software programming adaptor and PC connection cable 55000018-001 Programming cable Accessories: 943-O4V-2D-001/002-80E, 943-O4V-2D-1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E Catalog Listing Description 66195044-001 Mating connector straight 66195045-001 Mating connector angled 66195214-001 Straight cable/connector 2 m 66195216-001 Right-angle cable/connector 2 m www.honeywell.com/sensing - 24 Vdc 20% <40 mA 0 V to 10 V 4 mA to 20 mA - - *Attention! Do not expose sensor head to hot water >50 C or steam vapour. 2 947-O4V-2D947-O4V-2D1C0-80E 1D0-80E 5000 mm [196.85 in] 500 mm [19.69 in] 400 ms Ultrasonic Distance Sensors Mounting Dimensions (For reference only. mm/[in]) 942-O4N-2D-1A1/1A2-80E 943-O4V-2D-001/002/1C0/1D0-80E, 947-O4V-2D-1C0/1D0-80E Wiring P42-O4N-2D-1A1/1A2-80E View to solder pins of connector 943-O4V-2D-001-80E Pin 1: + 24 Vdc 5 3 2 Pin 5 Teach-In 4 Switching output SP1 3 5 Pin 2 Pin 4: SP1 6 +24 Vdc Pin 4 Pin 3: U/I 1 8 7 Pin 2: GND 4 Pin 1 Switching output SP2 Pin 5: SP2 1 R 2 R Pin 3 Pin 6: Hld/Sync 0V Pin 7: RxD Pin 8: TxD 943-O4V-2D-002-80E 943-O4V-2D-1C0/1D0-80E Pin 1 Pin 2 Pin 4 +24 Vdc Switching output 2 Pin 1 Load 4 Switching output 1 3 1 Teach-In Pin 3 2 Pin 5 Teach-In Pin 3 0 V/GND 947-O4V-2D-1C0-80E Pin 1 +24 Vdc Pin 4 Analogue output Pin 3 Analogue 5 2 0V 947-O4V-2D-1C0/1D0-80E Pin 2 3 4 Pin 4 1 5 Pin 5 +24 V Load 947-O4V-2D-1D0-80E 20 mA 10 V Enable Synchronisation Inhibit 4 3 1 2 4 mA 0V 500 mm 5000 mm 500 mm 5000 mm 0V Honeywell Sensing and Control 3 Detection Range 942-O4N-2D-1A1/1A2-80E, 943-04V-2D-001/002/1C0/1D0-80E 947-04V-2D-1C0/1D0-80E +600 +1000 mm mm -600 -1000 0 600 0 6000 mm 500 mm 5000 Enhanced detection of a target 100 mm x 100 mm Enhanced detection of a target 100 mm x 100 mm Possible detection of a large target Possible detection of a large target WARNING WARNING PERSONAL INJURY MISUSE OF DOCUMENTATION DO NOT USE these products as safety or emergency stop * devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. * Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of SALES AND SERVICE defective materials and faulty workmanship. Honeywell's Honeywell serves its customers through a worldwide network standard product warranty applies unless agreed to otherwise of sales offices, representatives and distributors. For by Honeywell in writing; please refer to your order application assistance, current specifications, pricing or name acknowledgement or consult your local sales office for specific of the nearest Authorized Distributor, contact your local sales warranty details. If warranted goods are returned to Honeywell office or: during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The E-mail: info.sc@honeywell.com foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of Internet: www.honeywell.com/sensing merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, Phone and Fax: or indirect damages. Asia Pacific +65 6355-2828 While we provide application assistance personally, through Europe +44 (0) 1698 481481 +65 6445-3033 Fax our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the +44 (0) 1698 481676 Fax Latin America +1-305-805-8188 +1-305-883-8257 Fax application. USA/Canada +1-800-537-6945 Specifications may change without notice. The information we +1-815-235-6847 supply is believed to be accurate and reliable as of this +1-815-235-6545 Fax printing. However, we assume no responsibility for its use. Automation and Control Solutions Sensing and Control Honeywell 1985 Douglas Drive North Minneapolis, MN 55422 www.honeywell.com/sensing 004451-1-EN IL50 GLO Printed in USA February 2006 Copyright (c) 2006 Honeywell International Inc. All rights reserved.