CPC1030N 4-Pin SOP OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 350 120 30 Description The CPC1030N is a miniature 1-Form-A solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The CPC1030N uses Clare's state of the art double molded vertical construction packaging to produce the world's smallest relay. The CPC1030N offers board space savings of at least 20% over the competitor's larger 4-Pin SOP relay. Units VP mA W Features * Small 4-Pin SOP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 1500Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Tape & Reel Version Available Approvals * UL Recognized Component File#: E76270 * EN/IEC 60950-1 Compliant Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Ordering Information Part # CPC1030N CPC1030NTR CPC1030NTR-1 Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) picked from pin 1 side 4-Pin SOP (2000/reel) picked from pin 3 side Pin Configuration CPC1030N Pinout + Control - Control 1 4 2 3 Load Load Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON DS-CPC1030N-R09 www.clare.com TOFF CPC1030N Absolute Maximum Ratings (@ 25C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Ratings 350 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Linearly 3.33 mw / C Electrical Characteristics Parameter Output Characteristics @ 25C Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Input/Output Characteristics @ 25C Capacitance Input to Output Conditions Symbol Min Typ Max t=10ms IL=120mA VL=350V IL ILPK RON ILEAK - 25 - 120 350 30 1 50V; f=1MHz TON TOFF COUT - 25 2 1 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.6 1.2 - 2 1.4 10 mA mA V A - - - 1 - pF IF=5mA, VL=10V Units mA A ms pF 1 Load current derates linearly from 120mA @ 25oC to 80mA @85oC. 2 Measurement taken within 1 second of on time. 3 For applications requiring high temperature operation (greater than 60oC) an LED drive current of 10mA is recommended. www.clare.com R09 CPC1030N PERFORMANCE DATA* 35 20 15 10 25 20 15 10 5 5 0 0 1.19 1.21 1.23 1.25 23.5 24 24.5 25 25.5 On-Resistance ( ) LED Forward Voltage Drop (V) CPC1030N Typical IF for Switch Operation (Ambient Temperature = 25C) (Load Current = 120mA) Device Count (N) Device Count (N) 15 10 5 0.45 0.50 0.55 0.60 0.65 0.70 10 5 0.45 0.50 0.55 CPC1030N Typical Turn-Off Time (Ambient Temperature = 25C) (Load Current = 120mA; IF = 5mA) 0.65 0.70 15 10 5 0.22 0.23 0.24 0.25 0.26 0.27 390 Turn-On (ms) Blocking Voltage (VP) 395 385 380 375 370 365 -40 -20 0 20 40 60 Temperature (C) 80 100 395 400 CPC1030N Typical Turn-On Time (Ambient Temperature = 25C) (Load Current = 120mA; IF = 5mA) 0.50 0.60 0.70 0.80 0.90 Turn-On (ms) 100 IF =10mA 80 60 IF =5mA 40 1.10 0.016 0.012 120 1.00 CPC1030N Typical Leakage vs. Temperature (Measured across Pins 3 & 4) IL = max rated 0.010 0.008 0.006 0.004 0.002 -40 -20 0 20 40 60 80 100 0 120 -40 -20 0 Temperature (C) CPC1030N Typical Blocking Voltage vs. Temperature 390 5 0.014 0 385 10 140 Turn-Off (ms) 400 380 15 160 20 0.21 375 20 0 0.75 CPC1030N Typical Load Current vs. Temperature 180 Load Current (mA) Device Count (N) 0.60 370 LED Current (mA) 20 0 10 25 15 LED Current (mA) 25 15 Blocking Voltage (VP) 20 0 0.75 20 0 26.5 CPC1030N Typical IF for Switch Dropout (Ambient Temperature = 25C) (Load Current = 120mA) 25 20 26 Device Count (N) 25 25 5 Leakage (A) 1.17 CPC1030N Typical Blocking Voltage Distribution (Ambient Temperature = 25C) 30 Device Count (N) Device Count (N) 25 0 35 30 30 Device Count (N) CPC1030N Typical On-Resistance Distribution (Ambient Temperature = 25C) (Load Current = 120mA, IF = 2mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 CPC1030N Typical Turn-On vs. Temperature (Load Current = 80mA) IF = 5mA IF = 10mA -40 -20 0 20 40 60 Temperature (C) 80 100 Turn-Off (ms) 35 CPC1030N Typical LED Forward Voltage Drop (Ambient Temperature = 25C) IF = 5mA 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 20 40 60 Temperature (C) 80 100 CPC1030N Typical Turn-Off vs. Temperature (Load Current = 80mA) IF = 10mA IF = 5mA -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.clare.com CPC1030N PERFORMANCE DATA* 1.4 IF = 50mA IF = 30mA IF = 20mA IF = 10mA IF = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 Turn-On (ms) 1.6 120 60 3.0 50 2.5 LED Current (mA) On-Resistance ( ) CPC1030N Typical On-Resistance vs. Temperature (Load Current = 80mA; IF = 10mA) 40 30 20 0 -40 -20 0 20 40 60 Temperature (C) 80 100 CPC1030N Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mA 0 -50 -100 -2 -1 0 1 Load Voltage (V) 2 3 0.8 0.6 0.4 10 15 20 25 30 35 40 45 0 50 0 5 10 15 20 25 30 35 40 45 LED Forward Current (mA) LED Forward Current (mA) CPC1030N Typical IF for Switch Operation vs. Temperature (Load Current = 80mA) CPC1030N Typical IF for Switch Dropout vs. Temperature (Load Current = 80mA) 3.0 50 2.5 -40 -20 0 20 40 60 80 100 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 Temperature (C) 80 100 CPC1030N Energy Rating Curve Load Current (A) 50 -3 5 Temperature (C) 100 -150 0 1.0 0 1.0 0.2 1.5 10 1.4 1.2 2.0 0.5 150 Load Current (mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) LED Forward Voltage Drop (V) 1.8 CPC1030N Typical Turn-Off vs. LED Forward Current (Load Current = 120mA) CPC1030N Typical Turn-On vs. LED Forward Current (Load Current = 120mA) LED Current (mA) CPC1030N Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. www.clare.com R09 MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOIC Narrow ("N" Suffix) 2.54 0.127 (0.100 0.005) 6.096 0.102 (0.240 0.004) 3.81 0.08 (0.150 0.003) 0.38 x 45 (0.015 x 45) 1.020 0.025 (0.040 0.001) 0.200 0.025 (0.008 0.001) 5.66 0.14 (0.223 0.005) 1.448 (0.057) 4.09 0.20 (0.161 0.008) 2.18 MAX. (0.086) 0.432 0.127 (0.017 0.005) PC Board Pattern (Top View) 0.38 TYP. (0.015 TYP.) 0.889 (0.035) 2.54 TYP. (0.100 TYP.) Tape and Reel Packaging for 4-pin SOP package A0 = 6.50 (0.256) 330.2 DiA (13.00" DiA) P = 8.00 (0.315) A Top Cover Tape Thickness 0.102 MAX (0.004 MAX) B0 = 4.70 (0.185) K1 = 2.30 (0.091) W = 12.00 MAX (0.472 MAX) K0 = 2.7 (0.106) A SECTION A-A NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Embossed Carrier Dimensions: mm (inches) Embossment CPC1030NTR CPC1030NTR-1 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1030N-R09 (c)Copyright 2007, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 2/2/07