SB007T03Q
No.4169-1/3
Applications
•Universal-use rectifiers.
•High frequency rectification (switching regulators, converters, choppers).
Features
•Low forward voltage (VF max=0.55V).
•Fast reverse recovery time (trr max=10ns).
•Low switching noise.
•Low leakage current and high reliability due to highly reliable planar structure.
•Series connection of 2 elements in an ultrasmall-sized package facilitates high-density mounting and permits
SB007T03Q-applied equipment to be made smaller.
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Repetitive Peak Reverse Voltage VRRM 30 V
Nonrepetitive Peak Reverse Surge Voltage VRSM 35 V
Average Output Current IO70 mA
Surge Forward Current IFSM 50Hz sine wave, 1 cycle 2 A
Junction Temperature Tj --55 to +125 °C
Storage Temperature Tstg --55 to +125 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Reverse Voltage VRIR=20µA30V
Forward Voltage VFIF=70mA 0.55 V
Reverse Current IRVR=15V 5 µA
Interterminal Capacitance C VR=10V, f=1MHz 3.0 pF
Reverse Recovery Time trr IF=IR=10mA, See specified Test Circuit. 10 ns
Thermal Resistance Rth(j-a)
Mounted on a ceramic board (600mm
2
✕0.8mm)
650 °C / W
Marking : N
Ordering number : ENN4169B
71504 TS IM TB-00000592 / 62098 HA (KT) / 12097 GI / 9302 MH (KOTO) 8-7190
SB007T03Q Schottky Barrier Diode (Series Connection)
30V, 70mA Rectifier
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SB007T03Q
No.4169-2/3
Package Dimensions trr Test Circuit
unit : mm
1246A
Electrical Connection
0.3
0.65 0.65
2.0
0.425 1.250
2.1 0.425
0.15
0 to 0.1
0.2
0.3 0.6
0.9
12
3
1 : Anode
2 : Cathode
3 : Cathode / Anode
SANYO : MCP
Duty≤10%
50Ω100Ω10Ω
--5V trr
10µs
10mA10mA
1.0mA
3
12
Top view
1 : Anode
2 : Cathode
3 : Cathode / Anode
0
1.0
0.3 0.4 0.50.1 0.2
10
100
2
7
5
3
7
5
3
2
7
5
3
2
0.70.6
Forward Voltage, VF -- V
Forward Current, IF -- mA
IF -- VF
Ta=125°C
25°C
--25°C
75°C
ID00224
0
0.01
0.1
2
5
2
5
2
5
2
5
2
5
1.0
10
100
1000
355 1015202530
Rev erse Voltage, VR -- V
IR -- VR
Reverse Current, IR -- µA
Ta=125°C
25°C
50°C
75°C
100°C
ID00225
I
S
20ms
t
Current waveform 50Hz sine wave
70.01 23 7
0.1
052 2337
1.0
5
2.4
2.8
1.6
0.8
2.0
1.2
0.4
Time, t -- s
Surge Forward Current, IFSM(Peak) -- A
ID00227
1.0 10
2
2
3
3
5
5
1.0
10
7
7
23 5 23 5757
Rev erse Voltage, VR -- V
C -- VR
Interterminal Capacitance, C -- pF
f=1MHz
ID00226
IFSM -- t
SB007T03Q
No.4169-3/3
PS
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of July, 2004. Specifications and information herein are subject
to change without notice.
