BI Technologies Corporation
4200 Bonita Place, Fullerton, CA 92835 USA
Phone: 714 447 2345 Website: www.bitechnologies.com
Position Sensor
7/8” Diameter
Non-Contacting Hall Effect
Single Turn
Model 6120
6121 1/8” Shaft, 1/4” Bushing
6124 6 mm Shaft, 3/8” Bushing
6126 1/8” Shaft, 3/8” Bushing
6127 1/4” Shaft, 3/8” Bushing
612x-XXXX Custom models are available; Contact Customer Service for special features
Total Mechanical Travel 360° Continuous (320° with stop feature)
Bearing Bearing Bronze Bushing
Weight 0.6 oz. Typical
Static Stop Strength 40 in. oz.
Panel Nut Tightening Torque 25 in. lb. Max.
Rotational Speed 500 RPM Max.
MODEL STYLES AVAILABLE
MECHANICAL
ELECTRICAL1
1Specifications subject to change without notice.
2Linearity is measured between 1% and 99% of input voltage.
February 19, 2015 Model 6120 page 1 of 3
Output Voltage 0.2 Vdc (4%) to 4.8 Vdc (96%) Typical (see Feature Codes table)
Output Overvoltage Limits 10 Vdc to -0.3 Vdc; output may be shorted to ground or supply without damage
Output Current ±8 mA Max.
Output Load 1 kΩ Min., 10 kΩ Typical
Operating Input Voltage Range 4.5 to 5.5 Vdc
Supply Voltage Absolute Limits 20 Vdc Max., -10 Vdc Min.
Independent Linearity2±0.5% (0.25% Available)
Hysteresis 0.2% Max.
Resolution 0.088° for 360° travel, 0.011° for 45° travel
Supply Current 8.5 mA Typical, 12 mA Max.
Dielectric Strength 750 V rms
Insulation Resistance 1,000 MegΩ Min.
Electrostatic Discharge (ESD) Passes 2 kV human body model and 15 kV air discharge
Bulk Current Injection (BCI) Passes 2-500 MHz at 200 mA
Actual Electrical Travel 360° Typical (see Ordering Information)
Temperature Coefficient of Output Voltage ± 20 ppm/°C
RoHS 2
compliant
Pb