SIP20C Series Single output DC-DC CONVERTERS * * * * * * * * * * 9-20 W Non-isolated DC-DC Regulators 1 Updated version of SIP20 Best-of-class wide output trim range Industry standard footprint High power density (60 W/in3) High Efficiency 90% Fixed frequency (500 kHz) Remote ON/OFF Undervoltage lockout (UVLO) Remote sense option Available RoHS compliant The SIP20C series are non-isolated dc-dc converters packaged in a single-in-line footprint (2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5 Vdc to 3.3 Vdc and lower voltages. The SIP20C offers a best-of-class wide output trim range which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIP20C from existing 5 V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIP20C is designed for applications that include distributed power, workstations, computers and file servers. Implementing state of the art surface mount technology and automated manufacturing techniques, the SIP20C offers compact size and efficiencies of 90%. The SIP20C is an updated version of the original SIP20 and is fully compatible with the original model. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability S3V3J S2V5J S1V5J Set point accuracy (See Note 1) 2.7% Line regulation Vin = 4.5-5.5 V 0.3% Load regulation Io = 0-6 A 0.3% Minimum load 0A Overshoot/undershoot Ripple and noise (See Note 8) None 0 to 20 MHz BW Temperature coefficient 100 mV pk-pk, 30 mV rms max. Radiated emissions Electrostatic discharge EN55022/11, FCC part 15 EN61000-4-2, IEC801-2 (See Note 6) Level A GENERAL SPECIFICATIONS Efficiency See table Isolation voltage Switching frequency Non-isolated Fixed 500 kHz typ. Approvals and standards (See Note 7) VDE0805, EN60950, IEC950 UL1950, CSA C22.2 No. 950 Material flammability Dimensions UL94V-0 (LxWxH) 0.01%/C Transient response (See Note 2) Remote sense 60% to 115% 60% to 110% 87% to 130% (4) 2.0% max. deviation 300 s recovery to within 1.0% Pin length 0.5 Vdc compensation MTBF 63.5 x 13.97 x 5.84 mm 2.5 x 0.55 x 0.23 inches 0.135 0.02 inches (3.43 0.5 mm) Weight 5 g (0.18 oz) MIL-HDBK-217F >1,000,000 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range Input current No load Input current @ Io max. and Vin = 0-5.5 V Input reflected ripple (See Note 3) Remote ON/OFF Operating ambient, See curve convection cooled Operating ambient, -25 C to +85 C 300 LFM forced air See Curve Non-operating -55 C to +100 C Altitude Operating Non-operating Vibration 5-500 Hz 150 mA 5.3 A max. 200 mA (See Note 5) Start-up time External capacitor Thermal performance 4.5 to 5.5 VDC 1.0 ms (See Note 4) 100 F 10,000 feet max. 40,000 feet max. 2.4G rms (approx.) International Safety Standard Approvals VDE0805/EN60950/IEC950 File No. 126328 UL1950 File No. E174104 CSA 22.2 No. 950 and CB Report and Certificate to DE1-31667 File Name: sip20c.pdf Rev (01): 16 Dec 2005 SIP20C Series Single output DC-DC CONVERTERS 9-20 W Non-isolated DC-DC Regulators 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (6, 10, 11) 20 W 4.5-5.5 Vdc 3.3 V 0A 6A 90% 0.3% 0.3% SIP20C-05S3V3J 15 W 4.5-5.5 Vdc 2.5 V 0A 6A 82% 0.3% 0.3% SIP20C-05S2V5J 9W 4.5-5.5 Vdc 1.5 V 0A 6A 75% 0.3% 0.3% SIP20C-05S1V5J Notes REGULATION PROTECTION 1 Vin = 5.0 V, Io = full load, TA = 25 C. Total error band 4.5% over all operating conditions and temperatures until end of life. 2 di/dt = 1 A/1 s, Vin = 5 Vdc, Tc = 25 C, load change = 0.5 lo max. to lo max. and Io max. to 0.5 Io max. 3 With simulated source impedance of 500 nH. 5 Hz to 20 MHz. 4 Use a 100 F with ESR = 0.045 max. at 100 kHz @ 25 C. 5 Referenced to ground for shutdown. If pin 6 is high unit will shut down. If pin 6 is open unit will operate as normal. 6 Single line sense; 0.5 Vdc compensation. Designate with the suffix 'R' e.g. SIP20C-05S3V3RJ. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 0 MHz to 20 MHz BW, 0.1 F ceramic, 1 F tantalum on output. 9 A short from +Vout to ground of less than 100 m may cause the unit to enter a non-destructive latch-up mode. If latch-up does occur the power supply to the unit may need to be cycled. 10 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 11 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Short-circuit Continuous (See Note 9) Input surge 6 Vdc continuous max. Undervoltage UVLO Vin <3.8 V Thermal Automatic recovery, unit will shut down if RT1 exceeds 85 C (See diagram below) EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using either method shown below. J1 PIN 5 J1 PIN 5 TRIM UP J2 PIN 5 J2 PIN 5 10K TRIMPOT TRIM DOWN J1 PIN 2 J1 PIN 2 DERATING CURVE 6 300 LFM J1 PIN CONNECTIONS Output Current (A) 5 200 LFM 100 LFM 4 3 NATURAL CONVECTION COOLING 2 PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Opt. Remote Sense (+) 1 0 -25C 0C 15C 25C 35C 45C 55C 65C 75C 85C 4 +Vout 5 Ground AMBIENT TEMPERATURE (C) J2 PIN CONNECTIONS 2.50 (63.5) 0.23 Max. (5.84) PC Board 0.55 (13.97) 0.135 (3.43) 0.685 (17.40) RT1 0.025 (0.635) Square Pins 1 2 34 5 1234 56 J1 0.140 Max. (3.556) J2 0.10 (2.54) Optional Remote Sense Pin (See Note 6) 0.28 (7.11) PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF 1.90 (48.26) ALL DIMENSIONS IN INCHES (mm) Recommended hole size 0.04 (1.0) Plated through hole Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. www.artesyn.com File Name: sip20c.pdf Rev (01): 16 Dec