DC-DC CONVERTERS 9-20 W Non-isolated DC-DC Regulators 1
2 YEAR WARRANTY
SIP20C Series
Single output
•Updated version of SIP20
•Best-of-class wide output trim range
•Industry standard footprint
•High power density (60 W/in3)
•High Efficiency 90%
•Fixed frequency (500 kHz)
•Remote ON/OFF
•Undervoltage lockout (UVLO)
•Remote sense option
•Available RoHS compliant
The SIP20C series are non-isolated dc-dc converters packaged in a single-in-line footprint
(2.5 x 0.55 x 0.23 inches) giving designers a cost effective solution for conversion of 5 Vdc to
3.3 Vdc and lower voltages. The SIP20C offers a best-of-class wide output trim range which
allows maximum design flexibility and a pathway for future upgrades. Local voltage
conversion by the SIP20C from existing 5 V system voltages eliminates the need for redesign
of existing power architectures when voltage requirements change. The SIP20C is designed
for applications that include distributed power, workstations, computers and file servers.
Implementing state of the art surface mount technology and automated manufacturing
techniques, the SIP20C offers compact size and efficiencies of 90%. The SIP20C is an
updated version of the original SIP20 and is fully compatible with the original model.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
EMC CHARACTERISTICS (4)
Radiated emissions EN55022/11, FCC part 15 Level A
Electrostatic discharge EN61000-4-2, IEC801-2
GENERAL SPECIFICATIONS
Efficiency See table
Isolation voltage Non-isolated
Switching frequency Fixed 500 kHz typ.
Approvals and VDE0805, EN60950, IEC950
standards (See Note 7) UL1950, CSA C22.2 No. 950
Material flammability UL94V-0
Dimensions (LxWxH) 63.5 x 13.97 x 5.84 mm
2.5 x 0.55 x 0.23 inches
Pin length 0.135 ±0.02 inches (3.43 ±0.5 mm)
Weight 5 g (0.18 oz)
MTBF MIL-HDBK-217F >1,000,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, See curve
convection cooled
Operating ambient, -25 °C to +85 °C
300 LFM forced air See Curve
Non-operating -55 °C to +100 °C
Altitude Operating 10,000 feet max.
Non-operating 40,000 feet max.
Vibration 5-500 Hz 2.4G rms (approx.)
OUTPUT SPECIFICATIONS
Voltage adjustability S3V3J 60% to 115%
S2V5J 60% to 110%
S1V5J 87% to 130%
Set point accuracy (See Note 1) ±2.7%
Line regulation Vin = 4.5-5.5 V ±0.3%
Load regulation Io = 0-6 A ±0.3%
Minimum load 0 A
Overshoot/undershoot None
Ripple and noise 0 to 20 MHz BW 100 mV pk-pk,
(See Note 8) 30 mV rms max.
Temperature coefficient ±0.01%/°C
Transient response ±2.0% max. deviation
(See Note 2) 300 µs recovery
to within ±1.0%
Remote sense (See Note 6) 0.5 Vdc compensation
INPUT SPECIFICATIONS
Input voltage range 4.5 to 5.5 VDC
Input current No load 150 mA
Input current @ Io max. and 5.3 A max.
Vin = 0-5.5 V
Input reflected ripple (See Note 3) 200 mA
Remote ON/OFF (See Note 5)
Start-up time 1.0 ms
External capacitor (See Note 4) 100 µF
SPECIFICATIONS
International Safety Standard Approvals
VDE0805/EN60950/IEC950 File No. 126328
UL1950 File No. E174104
CSA 22.2 No. 950 and CB Report and Certificate to DE1-31667
File Name: sip20c.pdf Rev (01): 16 Dec 2005
0.23 Max.
(5.84)
0.025
(0.635)
Square
Pins
PC Board
0.140 Max.
(3.556)
0.135
(3.43)
0.28 (7.11)
2.50 (63.5) 0.55 (13.97)
0.685 (17.40)
0.10 (2.54)
RT1
J1 J2
1123 56
2345
1.90 (48.26)
Optional Remote
Sense Pin (See Note 6)
ALL DIMENSIONS IN INCHES (mm)
Recommended hole size 0.04 (1.0)
Plated through hole
4
TRIM
UP
TRIM
DOWN
J1 PIN 5
J2 PIN 5
J1 PIN 2
J1 PIN 5
J2 PIN 5
J1 PIN 2
10KΩ
TRIMPO
T
Datasheet © Artesyn Technologies
®
2005
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
NNootteess
1Vin = 5.0 V, Io = full load, TA= 25 °C. Total error band ±4.5% over all
operating conditions and temperatures until end of life.
2di/dt = 1 A/1 µs, Vin = 5 Vdc, Tc = 25 °C, load change = 0.5 lo max. to lo
max. and Io max. to 0.5 Io max.
3With simulated source impedance of 500 nH. 5 Hz to 20 MHz.
4Use a 100 µF with ESR = 0.045 Ω max. at 100 kHz @ 25 °C.
5Referenced to ground for shutdown. If pin 6 is high unit will shut down. If
pin 6 is open unit will operate as normal.
6Single line sense; 0.5 Vdc compensation. Designate with the suffix 'R'
e.g. SIP20C-05S3V3RJ.
7This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
80 MHz to 20 MHz BW, 0.1 µF ceramic, 1 µF tantalum on output.
9A short from +Vout to ground of less than 100 mΩ may cause the unit to
enter a non-destructive latch-up mode. If latch-up does occur the power
supply to the unit may need to be cycled.
10 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
11 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
PROTECTION
Short-circuit Continuous (See Note 9)
Input surge 6 Vdc continuous max.
Undervoltage UVLO Vin <3.8 V
Thermal Automatic recovery, unit will
shut down if RT1 exceeds 85 °C
(See diagram below)
J1 PIN CONNECTIONS
PIN NUMBER FUNCTION
1 +Vout
2 +Vout
3 Opt. Remote Sense (+)
4 +Vout
5 Ground
J2 PIN CONNECTIONS
PIN NUMBER FUNCTION
1 Ground
2+Vin
3+Vin
4 No Pin
5 Trim
6 Remote ON/OFF
SIP20C Series
Single output
DC-DC CONVERTERS 9-20 W Non-isolated DC-DC Regulators 2
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using either method shown below.
www.artesyn.com
6
5
4
3
2
1
0
-25°C 0°C 15°C 25°C 35°C 45°C 55°C 65°C 75°C 85°C
DERATING CURVE
200 LFM
300 LFM
Output Current (A)
AMBIENT TEMPERATURE (°C)
100 LFM
NATURAL
CONVECTION
COOLING
OUTPUT
INPUT OUTPUT
OUTPUT OUTPUT
EFFICIENCY REGULATION MODEL
POWER
VOLTAGE VOLTAGE
CURRENT CURRENT
(TYP.) LINE LOAD NUMBER (6, 10, 11)
(MAX.) (MIN.) (MAX.)
20 W 4.5-5.5 Vdc 3.3 V 0 A 6 A 90% ±0.3% ±0.3% SIP20C-05S3V3J
15 W 4.5-5.5 Vdc 2.5 V 0 A 6 A 82% ±0.3% ±0.3% SIP20C-05S2V5J
9 W 4.5-5.5 Vdc 1.5 V 0 A 6 A 75% ±0.3% ±0.3% SIP20C-05S1V5J
File Name: sip20c.pdf Rev (01): 16 Dec
