NOTES: UNLESS OTHERWISE SPECIFIED 1. = 2 ONOAnPr 12. 13. 14, 15. THIS COMPONENT CONFORMS TO UL60950, UL FILE NO. IS: 216117. WARNING:| THIS COMPONENT IS RECOGNIZED BY ONE OR A MORE SAFETY AGENCIES SUCH AS UL, VDE, / j MUST HAVE PRIOR APPROVAL BY THE DESIGN CSA AND/OR TUV. ALL ENGINEERING CHANGES CENTER QUALITY DEPARTMENT FOR SAFETY AGENCY COMPLIANCE. NOTICE: PLASTIC HOUSING: THERMOPLASTIC MATERIAL WITH FLAMMABILITY RATING UL 94VO0 OR BETTER. CONTACT BASE MATERIAL: PHOSPHOR BRONZE. CONTACTS UNDERPLATE: 30-50 MICROINCHES DUCTILE NICKEL. CONTACTS PLATING: 50 MICROINCHES GOLD PLATING. SOLDER TAIL PLATING MATERIAL: 200-500 MICROINCHES 100% TIN, MATTE FINISH. METAL SHIELD: NICKEL PLATING ON COPPER ALLOY. JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS PART 68 SUBPART F. PCB PLATING: HASL (TOP PCB) ENIG (BOTTOM PCB) SOLDERABILITY: CONFORMS TO ANSI/JSTD-002, IPC/EIA J-STDOOSA. OPERATING TEMPERATURE: OC TO +70C STORAGE TEMPERATURE: 20C TO +125C JEDEC MOISTURE: LEVEL 1. DIMENSIONS ARE IN INCHES [MILLIMETERS] WITH THE FOLLOWING THIS IS A RoHS COMPLIANT COMPONENT/PRODUCT. ALL ENGINEERING CHANGES MUST HAVE PRIOR APPROVAL BY THE DESIGN CENTER. TOLERANCES: [MILLIMETERS] ARE FOR REFERENCE ONLY. XX= +.02 +0.5] XXX= +.010 +0.25] Pulse www.pulseelectronics.com vec 0-_ PARAMETER SPECIFICATIONS 70 : 08 OPERATING TEMP oc 70C TURNS RATIO 1.00 + 2% POLARITY PER SCHEMATIC - 75 OHM 100 KHz 1-125 MHz 80 "4 o7 INSERTION LOSS {1.2 dB MAX| 0.2-0.0028~1-4dB MAX 50 o5 RETURN LOSS 1-40 MHz 40-100 MHz Oo (Z OUT = 100 OHM 15%) |-16 dB MIN |-104+20*LOG1q{f/80 MHz) dB MIN 75 OHM & a ~ INDUCTANCE (OCL) | 5 uu min. (MEASURED AT 100 KHz, 100 VRS ) w 60 o4m (MEDIA SIDE, 0C-70C) u AND WITH 8 mA DC BIAS 30 Oo 6 2 1 MHz 10100 MHz Oo m m CROSSTALK: ADYACENT | 50 dB MIN| 55+22*LOGjq (f/10) dB MIN 75 OHM COMMON MODE 2 MHz 30-200 MHz 40 Oo 3 REJECTION RATIO |50 dB MIN | 15+20*LOG9 (f/200) dB MIN 10 O 2 DC_ RESISTANCE, 1/2 WINDING .65 OHMS MAX eM DCR IMBALANCE | +.065 OHMS MAX (CENTER TAP SYMMETRY) INPUT OUTPUT 20 01 ISOLATION 2250 VDC MIN @ 60 SECONDS == 2X.1uF =~ 1000 pF, 2 KV NOTE: f IS FREQUENCY IN MHz. GND 10 T EMMITTED COLOR GREEN ORANGE AM GREEN HT WAVELENGTH (If=20ma) 568 nm 610 nm BRIGTHNESS TYP (rnc) 8.5 6 ORANGE If (ma) 20 20 11 VIEWING ANGLE 100 100 42 Q@_____ POWER DISSIPATION (Pd) 100 mW MAX BO mW MAX SCHEMATIC (EACH PORT) PEAK FORWARD CURRENT (10 us PULSE) 150 mA MAX 150 mA MAX FOWARD VOLTAGE (Vf) (if=20 ma) |2.2 TO 2.6 VOLTS] 2.2 TO 2.6 VOLTS ELECTRICAL CHARACTERISTICS AT +25C UNLESS OTHERWISE SPECIFIED (FOR REFERENCE ONLY. USED FOR CUSTOMER INFORMATION.) NOTE: PER VENDORS SPECIFICATIONS @ Copyright, 2010. Pulse Electronics Corp. All rights reserved. Drawing specifications subject to change without notice. (02/11/11) PULSE CON FIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: DWG. NO./ PART NO. REV. PROPRIETARY CONN,RJ45,2X8,1GD,1:1,TY PS-2316.412-C 1 JCO0319NL M15Pulse www.pulseelectronics.com - 1.030 +.005 [26.20 +0.13] | pies tors) 7 995 #,005, Cee ei ei ti) be _ oO oO oO oO oO US PATENT 7241181 & 6962511 J] PulseJack lob.oa1oNt PANEL CUT OUT i wt Si ft ft fe ft fe fp ce Say a .025 [0.63] .015 4.005. TO TOP 16 SURFACES [0.38 0.13] OF PCB I (4.67) [(119)] ) L .010 [0.25] MAX SHIELD CROSSBAR BULGING 4.540 MAX [115.32 MAX] +{ 1.235 MAX [31.40 MAX] GREEN/ORANGE =3. 97 (=97.79)] ____ +} _. ; LED, UPMER PORT 7X .550 (=3.850) [7X 13.97 (=97.79)] (171) [(4.35)] GREEN/ORANGE No [- (550) [(13.97)] =jl1.005 MIN [.13 MIN] LED, LOWER PORT nA nA nA A A nA nA & ooo ooo oc oc coc ooo co \ @ UPPER = q p (an, Oo 28.3 + + + + 1.005 MAX LOWER D (25.52 MAX] o .150 pend L_ 430 [10.92] | (SHIELD TAB) L125 [3.17] .120 [3.05] (POST) (SIGNAL PINS) p00 aaq0o0000 PIN 17 \CPIN 11 PIN 12 PIN 12 FINAL OUTLINE @ Copyright, 2010. Pulse Electronics Corp. All rights reserved. Drawing specifications subject to change without notice. (02/11/11) PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. PROPRIETARY CONN,RJ45,2X8,1GD,1:1,TY PS2316.412-C 2 JCO0319NL M15T- 480 [12.19] 7X .550 (=3.850) [7X 13.97 (=97.79)] (.550) [(13.97)] fit} 4X $.062 [61.57] 14 444 4444 +444 4444, 32X #.040 +.003 [#1.0160 +0.0762] 380 [9.65] -100 [2.54] 160X 9.036 +.0035 015 [0.38] [90.9144 +0.0762] ae HH Pulse www.pulseelectronics.com 9X .050 (= 450) 9 [1.27 (=11.43) et jt A [NJ 7 4+ | .727 [18.47] - t .610 [15.49] 4 | .430 [10.92] | .180 [4.57]- .095 [2.41] =] .050 [1.27] .050 [1.27] .260 [6.60] H= (.550) [(13.97)] 7X .550 (=3.850) [7X 13.97 (=97.79)] 4.300 [109.22] -S 2x 9.128 +555 +0.08 [+5.25 +9.08) 4.520 [114.81] @. /\ 6 (.050) [(1.27)] JL et .185 [4.70] N .450 [11.43] I\ RECOMMENDED PCB FRONT EDGE CUTOUT. THE BOTTOM SHIELD GROUND TABS (FRONT) SHOULD NOT BE SEATE THE TOP OF THE PCB 4.600 [116.84] 4.300 [109.22] SUGGESTED PC BOARD LAYOUT VIEWED FROM COMPONENT SIDE UNLESS OTHERWISE SPECIFIED DIMENSIONAL TOLERANCE IS +.002 1.230 Ot +644 $O+4 . Ge +4 HL | ! 535 [13. a 425 [10.80] (sia Wy Mwwwyw@o WM @ Copyright, 2010. Pulse Electronics Corp. All rights reserved. Drawing specifications sone to change without notice. (02/11/11) PULSE CON FIDENTIAL PROPRIETARY PRODUCT DESCRIPTION PS DRAWING SHEET: DWG. NO./ PART NO. REV. CONN,RJ45,2X8,1GD,1:1,TY PS-2316.412-C 5 JCO0319NL M15