5ME SERIES Metallized Polyester Metallized Polyester Film Switching Power Supply Capacitors For applications requiring high current carrying temperatures with high DV/DT and peak current FEATURES - High Current Carrying Capability - High Operating Temperature - Low ESR and ESL - Compact Configuration - Five Termination Styles capability at elevated STANDARD CONFIGURATION - 5ME22 /axial lead termination - 5ME26 /tab terminations low profile - 5ME27 /tab terminations high profile - 5ME28 /internal coaxial leads - 5ME29 /internal coaxial leads with grounded copper shielding Rev. 2 Specification Summary Capacitance Range 1.0 to 200.0 microfarads. Capacitance is measured at 25C at/or referenced to a frequency of 1kHz. Capacitance Tolerance M=20%, K=10%, J=5% Quality Control Capacitors are tested 100% for: Capacitance tolerance Dissipation Factor Dielectric withstanding voltage Insulation Resistance Equivalent Series Resistance (ESR) Temperature Range Operating: -40C to +85C Storage: -55C to +85C Enclosure/ Construction Mylar tape outerwrap with specially formulated, conductive epoxy end fill to maximize heat exchange. Extended metallized polyester film. Voltage Rating DC working voltage ratings are from 30 to 400VDC. Process and inspection data are maintained on file and available on special request. Environmental Parameter Vibration Immersion Shock Humidity Thermal Shock Life Method 204 104 213 106 107 108 Reference MIL-STD-202 Condition D B I A F Characteristics Insulation Resistance Temperature(C) 25 Megaohmsx 20,000 Microfarads Insulation Resistance Capacitance Change Temperature(C) -40 PercentageChange -3.0 (typical) 85 +3.0 CapacitanceChange Dissipation Factor Will not exceed 1.0% when measured at 25C: at 1kHz for capacitance 20 microfarads; at 120 Hz for capacitance >microfarads. Dielectric Strength Capacitors withstand a DC potential of 150% rated voltage applied between the terminals for two (2) minutes without permanent breakdown. Test voltage is applied and discharged through one ohm per volt minimum, and at 25C. Rev. 2 DIMENSIONAL CAPACITANCE F 30 VDC 50 VDC 75 VDC 100 VDC 150 VDC 200 VDC 300 VDC 400 VDC 15 30 75 100 200 10 15 50 100 150 10 15 30 50 100 5 10 20 50 75 10 15 20 30 40 3 5 10 15 20 1 2 3 5 10 1 2 3 4 5 AND ELECTRICAL AXIAL LEADS 5ME22 T MAX H MAX 0.525 0.525 1.030 1.030 1.455 0.525 0.525 1.030 1.455 1.455 0.525 0.525 1.030 1.030 1.455 0.525 0.525 1.030 1.455 1.455 1.030 1.030 1.030 1.455 1.455 0.525 1.030 1.030 1.455 1.455 0.525 1.030 1.030 1.030 1.455 1.030 1.030 1.455 1.455 1.455 0.895 0.895 1.440 1.440 1.825 0.895 0.895 1.440 1.825 1.825 0.895 0.895 1.440 1.440 1.825 0.895 0.895 1.440 1.825 1.825 1.440 1.440 1.440 1.825 1.825 0.895 1.440 1.440 1.825 1.825 0.895 1.440 1.440 1.440 1.825 1.440 1.440 1.825 1.825 1.825 L MAX 0.812 1.187 0.937 1.187 1.187 0.937 1.062 1.062 1.062 1.437 1.062 1.312 0.937 1.312 1.437 0.937 1.187 0.937 1.062 1.437 0.937 1.062 1.312 1.187 1.312 1.312 0.937 1.312 1.187 1.437 0.937 0.812 0.937 1.312 1.312 0.812 1.187 1.062 1.312 1.437 DATA LUGS 5ME26, 5ME27 T MAX H MAX 1.030 1.030 1.455 1.030 1.455 1.455 1.030 1.030 1.455 1.030 1.455 1.455 1.030 1.030 1.030 1.455 1.455 1.030 1.030 1.455 1.455 1.030 1.030 1.030 1.455 1.030 1.030 1.455 1.455 1.455 1.440 1.440 1.825 1.440 1.825 1.825 1.440 1.440 1.825 1.440 1.825 1.825 1.440 1.440 1.440 1.825 1.825 1.440 1.440 1.825 1.825 1.440 1.440 1.440 1.825 1.440 1.440 1.825 1.825 1.825 L MAX 0.937 1.187 1.187 1.062 1.062 1.437 0.937 1.312 1.437 0.937 1.062 1.437 0.937 1.062 1.312 1.187 1.312 0.937 1.312 1.187 1.437 0.812 0.937 1.312 1.312 0.812 1.187 1.062 1.312 1.437 RADIAL LEADS 5ME28, 5ME29 T MAX H MAX 1.030 1.030 1.455 1.030 1.455 1.455 1.030 1.030 1.455 1.030 1.455 1.455 1.030 1.030 1.030 1.455 1.455 1.030 1.030 1.455 1.455 1.030 1.030 1.030 1.455 1.030 1.030 1.455 1.455 1.455 1.440 1.440 1.825 1.440 1.825 1.825 1.440 1.440 1.825 1.440 1.825 1.825 1.440 1.440 1.440 1.825 1.825 1.440 1.440 1.825 1.825 1.440 1.440 1.440 1.825 1.440 1.440 1.825 1.825 1.825 L MAX 0.937 1.187 1.187 1.062 1.062 1.437 0.937 1.312 1.437 0.937 1.062 1.437 0.937 1.062 1.312 1.187 1.312 0.937 1.312 1.187 1.437 0.812 0.937 1.312 1.312 0.812 1.187 1.062 1.312 1.437 Note: Other sizes, values, andvoltagesare available uponrequest. Rev. 2 CAPACITANCE f 30 VDC 50 VDC 75 VDC 100 VDC 150 VDC 200 VDC 300 VDC 400 VDC 15 30 75 100 200 10 15 50 100 150 10 15 30 50 100 5 10 20 50 75 10 15 20 30 40 3 5 10 15 20 1 2 3 5 10 1 2 3 4 5 ESR 100Khz m OHMS 9 5 5 5 5 14 10 5 5 5 14 10 5 5 5 26 14 7 5 5 13 9 7 5 5 5 25 13 9 7 123 61 41 26 13 121 63 41 32 26 MAXIMUM RIPPLE CURRENT 20kHz TO 100kHz IN AMPS TEMPERATURES 25C 45C 65C 85C 9.0 13.6 31.4 35.3 63.2 7.5 9.9 26.2 47.2 56.4 8.3 10.9 21.3 28.3 48.3 5.6 9.2 17.3 35.8 44.0 11.9 15.9 18.9 27.5 33.8 5.4 8.8 14.3 20.7 24.8 2.8 5.3 7.1 9.9 17.6 3.9 6.2 9.1 10.9 12.9 7.4 11.2 25.8 29.0 51.9 6.1 8.2 21.5 38.7 46.3 6.9 8.9 17.5 23.3 39.7 4.6 7.5 14.2 29.4 36.2 9.7 13.1 15.5 22.6 27.7 4.5 7.3 11.7 17.0 20.4 2.3 4.4 5.8 8.1 14.5 3.2 5.1 7.5 9.0 10.6 5.3 8.0 18.6 20.9 37.3 4.4 5.9 15.4 27.8 33.3 4.9 6.4 12.6 16.7 28.5 3.3 5.4 10.2 21.2 26.0 7.0 9.4 11.2 16.3 19.9 3.2 5.2 8.4 12.2 14.7 1.7 3.1 4.2 5.8 10.4 2.3 3.7 5.4 6.4 7.6 1.4 2.1 4.8 5.3 9.6 1.1 1.5 4 7.1 8.5 1.3 1.6 3.2 4.3 7.3 0.8 1.4 2.6 5.4 6.7 1.8 2.4 2.9 4.2 5.1 0.8 1.3 2.2 3.1 3.8 0.4 0.8 1.1 1.5 2.7 0.6 0.9 1.4 1.7 2.0 I PEAK AMPS dv/dt V/s (TYP) ESL nH 950 905 3476 3017 6034 618 731 2437 4873 4472 609 642 2318 2140 3727 464 603 1854 3655 3254 1236 1462 1370 2413 2740 308 927 1027 1810 1789 247 676 742 685 1370 507 483 877 822 894 63 30 46 30 30 62 49 49 49 30 61 43 77 43 37 93 60 93 73 45 124 97 68 80 68 103 185 103 121 89 247 338 247 137 137 507 241 292 205 179 12 24 16 24 24 16 20 20 20 32 20 28 16 28 32 16 24 16 20 32 16 20 28 24 28 28 16 28 24 32 16 12 16 28 28 12 24 20 28 32 5ME22 5ME26 5ME27 (TYP) kHz F res 5ME28 5ME29 (TYP) kHz F res 375 187 145 102 72 454 290 159 112 72 355 245 229 134 89 562 325 281 159 102 398 290 212 187 150 549 562 300 265 199 1260 1030 726 425 300 1450 726 649 475 398 174 122 86 191 134 86 275 161 107 337 191 122 478 348 254 224 180 674 360 318 239 1236 871 510 360 1740 871 779 570 478 Note: Current ratingsare reflective of types5ME26 and5ME27. Other styles shall notexceed19 AMPS RMS. Current is limitied by #16 tinnedcopperleads. Rev. 2 MECHANICAL DATA Rev. 2 Rev. 2 ADDITIONAL INFORMATION The 5ME Series is one of the new generation of mil quality film capacitors developed by Electronic Concepts to meet the ever changing, higher performance demands of the electronic industry. The 5ME Series is specifically designed for switch-mode power supplies that require voltages to 400 VDC at temperatures to 85C with DV/DT as high as 507V/s and peak current to 6,000 amps. It also offers low ESR, low inductance and current capabilities to 75 amps.In addition styles 5ME28 and 5ME29 offer inductance as low as 12nH to maximize resonant frequency to as high as 1.7MHz. With the introduction of the 5ME Series, the circuit designer now has a film capacitor that can increase overall system performance with miniaturization -- and also realize significant cost savings. HOW TO ORDER TYPE 5ME Metallized Polypropine STYLE / VOLTAGE 22:axial leaded; 26:radial leaded tabs--low profile; 27:radial leaded tabs--high profile; 28:internal coaxial leads; 29:internal coaxial leads--copper shield; / B=50VDC; C=75VDC; etc. 26 B The first digits are significant, the third digit represents the number of zeros to follow to express capacitance in picofarads 106 CAPACITANCE IN PICO FARADS TOLERANCE K M=20% K=10% J=5% Marking and Date Code All capacitors are marked with company initials "EC", corporate logo or EC trademark--in addition to type 5ME, capacitance, tolerance, rated DC working voltage and date code. The first two digits of the date code represent the year, the second two digits the week, i.e., 0952 is the 52nd week of 2009, 0902 is the second week of 2009. Quality Assurance Major emphasis is placed on quality assurance. EC is an ISO 9001-2000 and AS9100:2004 Certified Company. Raw material inspection and the use of SPC manufacturing procedures assure the highest quality standards. Procedures are fully described in the EC Quality Control Manual. Electronic Concepts will continue to advance the state-of-the-art by utilizing leading edge technology, compact capacitor designs and establishing reliability procedures. Sales Offices United States Eastern: *Headquarters* P.O. Box 1278 Eatontown,NJ 07724 Tel: 732-542-7880 Fax: 732-542-0524 Central: Illinois 630-668-8747 Europe Ireland Electronic ConceptsEurope LTD IDA Estate, Oughterad Co. Galway, Ireland tel: +353-91-552385, 552432 fax: +353-91-552387 email: sales@ecicaps.ie website:www.electronicconcepts.ie email: sales@ecicaps.com website:www.ecicaps.com Rev. 2