V11
2
Specifications
TRG21 Series De-rating Curve
INPUT SPECIFICATIONS:
Voltage …....………........…........................................... 90~264Vac
Frequency ………………………………………….……………..... 47 to 63Hz
Input Current ……………………………………….……………..... 0.3 to 0.5A
Inrush Current …………….…Cold Start@25℃............. 40A max. @230Vac
Leakage Current …………………………………………………… 0.1mA max.
OUTPUT SPECIFICATIONS:
Voltage Accuracy ........................................…………............... ±2.0% max.
Line Regulation (note 3) ……………….…………...................…. ±1.0% max.
Load Regulation (note 4) ……………………….…….........…......
Holdup Time …………………………….…………..…… 8ms typ. @115Vac
SAFETY AND EMISSION:
Short Circuit Protection …………….………………………….…… Continuous
CE Directive ……………………………….……… 2004/108/EC, 93/42/EEC
Over Voltage Protection(TVS) …… 115%-
140% of nominal output voltage
Emissions … EN60601-1/EN61204-3/EN55022/CISPR Class B, EN55024
GENERAL SPECIFICATIONS:
Safety Approvals ……....................... UL60601-1,IEC60601-1,EN60601-1
Isolation ………………………………..………… Input to output = 5,656VDC
IEC60950-1,EN60950-1
Efficiency ……………………………………………………………….. see table
NOTE:
Switching Frequency ………………………………….………….. 100KHz typ.
1. Voltage accuracy is set of 60% rated load.
Operating Temperature ............................... -20 ~ 60℃(see derating curve)
2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
Storage Temperature ……………………………...….......……........ -25~85℃
Ripple & Noise measuring @20MHz BW.
Cooling ………………………………….………………… Natural Convection
3. Line regulation is measured from high line to low line with full load.
Humidity .................................................... 93% RH max. Non condensing
4. Load regulation is measured from 60% to full load and from 60% to
MTBF ……. MIL-STD-217F, GB, at 25℃/115VAC ..……… 400K hrs min.
20% load (60% +/- 40% load).
Dimensions ……….. 3.000x1.780x0.870Inches (76.20x45.20x22.10mm)
Weight …………………………………………………… 140g(0.31Pounds)
Mechanical Specification
Tolerance:Inches:X.XXX±0.02
Millimeters:X.XX±0.5
All Dimensions are in inches(mm)
18AWG / 1220mm
DC Plug :Right Angle(ψ5.5/ψ2.1) L12mm
DC Plug type: V+ ─●)─ V-
0.008[0.20]
IEC320/C8
48.031[1220.00]±1.969[50.00]3.000[76.20]
1.780[45.20]
0.870[22.10]
Typical at 25˚C, nominal line and 75% load, unless otherwise Specified
0%
20%
40%
60%
80%
100%
-20 -10 0 10 20 30 40 50 60
o
Rated Load(%)
20LFM(Natural Convection)