SinglFuseTM SF-2410FPxxxW Series Features n Single blow fuse for overcurrent n n n n n n Surface mount packaging for automated protection 6125 (EIA 2410) footprint Fast acting precision UL 248-14 listed RoHS compliant* and halogen free** Wire core SMD design assembly SF-2410FPxxxW Series - Fast Acting Precision Wire Core Surface Mount Fuses Electrical Characteristics SF-2410FP050W-2 SF-2410FP063W-2 SF-2410FP075W-2 SF-2410FP100W-2 SF-2410FP125W-2 SF-2410FP150W-2 SF-2410FP200W-2 SF-2410FP250W-2 SF-2410FP300W-2 SF-2410FP315W-2 SF-2410FP350W-2 SF-2410FP400W-2 SF-2410FP500W-2 SF-2410FP630W-2 SF-2410FP700W-2 SF-2410FP800W-2 Rated Current (Amps) 0.50 0.63 0.75 1.00 1.25 1.50 2.00 2.50 3.00 3.15 3.50 4.00 5.00 6.30 7.00 8.00 SF-2410FP1000W-2 10.00 Model Fusing Time Open within 5 sec. at 200 % rated current Resistance () Typ.*** 0.231 0.174 0.148 0.093 0.070 0.062 0.042 0.031 0.0249 0.0232 0.022 0.0172 0.0143 0.010 0.0094 0.0086 Rated Voltage Interrupting Rating AC 250 V DC 125 V AC 250 V 100 A DC 125 V 50 A DC 32 V 300 A AC 125 V DC 125 V 0.0066 AC 125 V 50 A DC 125 V 50 A DC 32 V 300 A AC 125 V 35 A DC 125 V 50 A DC 32 V 300 A Typical I2t (A2s) **** 0.10 0.16 0.23 0.59 0.96 1.19 2.75 1.21 1.73 2.20 2.50 4.10 5.90 12.50 14.20 20.30 29.20 *** Resistance value measured with 10 % rated current at 25 C ambient. Tolerance 25 %. **** Melting I2t calculated at 0.001 second pre-arcing time. Reliability Testing No. Test 1 Reflow and bend 2 Solderability 3 Soldering heat resistance 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 Mechanical shock 8 Thermal Shock 9 Life Requirement Test Condition DCR change 20 % ( 10 % for 1 A) 3 reflows at 245 C followed by a No mechanical damage 2 mm bend Test Reference Refer to STP document MIL-STD-202 Minimum 90 % coverage One dip at 245 C for 5 seconds Method 208 DCR change 20 % ( 10 % for 1 A) MIL-STD-202 One dip at 260 C for 10 seconds New solder coverage 75 % Method 210 DCR change 15 % MIL-STD-202 10 cycles No excessive corrosion Method 106 DCR change 10 % MIL-STD-202 48 hour exposure, 5 % salt solution No excessive corrosion Method 101 DCR change 10 % 0.4 inch D.A. or 30 G between MIL-STD-202 No mechanical damage 5-3000 Hz Method 204 DCR change 10 % MIL-STD-202 1500 G, 0.5 ms, half-sine shocks No mechanical damage Method 213 DCR change 10 % MIL-STD-202 100 cycles between -65 C and +125 C No mechanical damage Method 107 No electrical "opens" during testing Voltage drop change shall be less than 20 % of initial value WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. 80 % rated current (75 % for < 1 A fuses) Refer to STP for 2000 hours at ambient temperature document +25 C ** Bourns considers a product to be "halogen free" if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. "SinglFuse" is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuseTM SF-2410FPxxxW Series Applications n LCD / LED TVs n Notebooks / ultrabooks n White goods n Telecom systems n PC servers n Chargers n LCD monitors n DC/DC converters n DC/AC inverters SF-2410FPxxxW Series - Fast Acting Precision Wire Core Surface Mount Fuses Environmental Characteristics Agency Recognition Operating Temperature.................................................................................. -55 C to +125 C Storage Conditions Temperature................................................................................................ +5 C to +35 C Humidity.......................................................................................................... 40 % to 75 % Shelf Life...........................................................................2 years from manufacturing date Moisture Sensitivity Level.........................................................................................................1 ESD Classification (HBM)..............................................................................................Class 6 Typical Part Marking UL File Number.............................E198545 Construction FR4 PCB TERMINAL Cu/Ni/Sn How to Order Represents total content. Layout may vary. SF - 2410 FP 100 W - 2 SinglFuseTM Product Designator FUSE ELEMENT (Cu or Cu alloy) Fuse Blow Type FP = Fast Acting Precision Packaging Quantity SMD Footprint 2410 = 6125 (EIA 2410) size S 2,000 pieces per 7-inch reel Rated Current 050 ~ 1000 (0.50 A ~ 10.00 A) RATED CURRENT (A) C = 0.50 K = 3.00 S = 0.63 V = 3.15 D = 0.75 L = 3.50 E = 1.00 M = 4.00 F = 1.25 N = 5.00 G = 1.50 O = 6.30 I = 2.00 P = 7.00 J = 2.50 R = 8.00 Q = 10.0 6.1 0.15 (.240 .006) Structure Type W = Wire Core Recommended Pad Layout Packaging Type - 2 = Tape & Reel 3.00 (.118) Product Dimensions 6.1 0.15 (.240 .006) 1.35 0.38 (.053 .015) 2.16 0.20 (.085 .008) 2.49 0.15 (.098 .006) 3.15 (.124) 3.00 (.118) 8.60 (.338) 1.35 0.38 (.053 .015) 2.49 0.15 (.098 .006) 1.35 0.38 (.053 .015) 1.35 0.38 .015) 2.16(.053 0.20 3.15 (.124) (.085 .008) 8.60 (.338) 1.35 0.38 (.053 .015) 1.35 0.38 (.053 .015) 1.35 0.38 (.053 .015) DIMENSIONS: 1.35 0.38 (.053 .015) MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-2410FPxxxW Series - Fast Acting Precision Wire Core Surface Mount Fuses Current Rating Thermal Derating Curve DERATING (%) 110 105 100 95 90 85 80 75 70 65 60 55 50 -55 -35 -15 5 25 45 65 85 105 125 MAXIMUM OPERATING TEMPERATURE (C) Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 C/s MAX. RAMP DOWN RATE = 6 C/s TP TL TEMPERATURE (C) TEMPERATURE (C) TL MAX. RAMP UP RATE = 3 C/s MAX. RAMPAREA DOWN RATE = 6 C/s PREHEAT Tsmax Tsmax Tsmin tL tp tL PREHEAT AREA Tsmin tp ts TC -5 C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) Ramp Up Rate (TL to Tp) Liquidous Temperature (TL) Time (tL) maintained above TL Peak Package Body Temperature (Tp) Ts 25 TIME 25 C TO PEAK 25 Tc -5 C TIME TIME 25 C TO PEAK TIME Pb-Free Assembly 150 C 200 C 60~120 seconds 3 C / second max. 217 C 60~150 seconds 260 C Time (tp)* within 5 C of the specified classification temperature (Tc) 30 seconds* Time 25 C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) 6 C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. 10 sec. max. Recommended Temperature Profile for Wave Soldering 260 10 sec. max. TEMPERATURE (C) TEMPERATURE (C) 260 Wave soldering is suitable for 2410 size models. 150 PREHEATING 150 PREHEATING 120 seconds 120 seconds TIME TIME Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3312 - 2 mm SMD Trimming Potentiometer SF-2410FPxxxW Series - Fast Acting Precision Wire Core Surface Mount Fuses Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 3.003.00 A A 2.502.50 A A 2.002.00 A A 1.501.50 A A 1.251.25 A A 1.001.00 A A 0.750.75 A A 0.63 0.63 A A 0.500.50 A A 3.15 3.15 A A 3.50 3.50 A A 4.00 4.00 A A 5.00 5.00 A A 6.30 6.30 A A 7.00 7.00 A A 8.00 8.00 A A 10.0010.00 A A 100000 100000 100100 10.00 A 10.00 A 8.00 A8.00 A 7.00 A7.00 A 6.30 A6.30 A 5.00 A5.00 A 4.00 A4.00 A 3.50 A3.50 A 3.15 A3.15 A 3.00 A3.00 A 2.50 A2.50 A 2.00 A2.00 A 1.50 A1.50 A 1.25 A1.25 A 1.00 A1.00 A 0.75 A0.75 A 0.63 A0.63 A 0.50 A0.50 A 10000 10000 10 10 1 1 I2t (A2s) I2t (A2s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 10001000 100 100 10 10 0.1 0.1 1 1 0.010.01 0.1 0.1 0.001 0.001 0.1 0.1 1 1 10 10 CURRENT (A)(A) CURRENT 100 100 10001000 0.010.01 0.0010.001 0.01 0.01 0.1 0.1 1 1 10 10 100 100 TIME (SECONDS) TIME (SECONDS) Asia-Pacific: Tel: +886-2 2562-4117 * Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 * Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 * Email: americus@bourns.com www.bourns.com REV. B 01/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3312 - 2 mm SMD Trimming Potentiometer SF-2410FPxxxW Series Tape and Reel Packaging Specifications SF-2410FPxxxW Series per EIA 481-2 Tape Dimensions W 12.00 0.10 (.48 .004) P0 4.0 0.10 (.157 .004) P1 4.0 0.10 (.157 .004) P2 2.0 0.05 (.079 .002) 2.85 0.10 (.114 .004) A0 6.40 0.10 (.256 .004) B0 F 5.50 0.10 (.220 .004) E 1.75 0.10 (.069 .004) D0 1.55 0.10 (.059 .004) D1 1.55 0.10 (.059 .004) K0 2.35 0.10 (.094 .004) T 0.25 0.05 (.010 .002) PACKAGING: Plastic tape, 2,000 pcs. per reel 0.8 0.6 0.4 0.2 13.40 0.50 (.539 .020) 178.00 1.00 (7.008 .039) DIA. 2.20 0.30 (.087 .012) 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 0.8 0.6 0.4 0.2 1.20 0.20 (.047 .008) E 60.20 0.50 (2.370 .020) DIA. D0 1.40 0.20 (.055 .008) P0 P2 T W F B0 D1 P1 AO KO DIMENSIONS: MM (INCHES) DIRECTION OF UNREELING Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns(R) products manufactured by or on behalf of Bourns, Inc. and (32 ?+( 3$2".++$"3(5$+8:.41-2; Unless otherwise expressly indicated in writing, Bourns(R) products and data sheets relating thereto are subject to change 6(3'.43-.3("$2$122'.4+#"'$"*%.1 -#.!3 (-3'$+ 3$231$+$5 -3(-%.1, 3(.- -#5$1(%83' 324"'(-%.1, 3(.-(2"411$-3 and complete before placing orders for Bourns(R) products. The characteristics and parameters of a Bourns(R) product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns' knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns(R)/1.#4"3(- 42$1 //+(" 3(.-, 85 18 %1.,3'$# 3 2'$$3"' 1 "3$1(23("2 -#/ 1 ,$3$12#4$3.(3'$".,!(- 3(.-.%3'$.41-2(R) product with other components (-3'$42$1<2 //+(" 3(.-.1((3'$$-5(1.-,$-3.%3'$42$1 //+(" 3(.-(32$+%'$"' 1 "3$1(23("2 -#/ 1 ,$3$12.% .41-2(R) /1.#4"3 +2." - -##.5 18(-#(>$1$-3 //+(" 3(.-2 -# "34 +/$1%.1, -"$, 85 18.5$13(,$2$122'.4+# +6 825$1(%8 the actual performance of the Bourns(R)/1.#4"3(-3'$(12/$"(="#$5("$2 -# //+(" 3(.-2 -#, *$3'$(1.6-(-#$/$-#$-3 )4#&,$-321$& 1#(-&3'$ ,.4-3.% ##(3(.- +3$23, 1&(-3.#$2(&-(-3.3'$(1#$5("$.1 //+(" 3(.-3.".,/$-2 3$%.1 #(>$1$-"$2!$36$$-+ !.1 3.18 -#1$ +6.1+#".-#(3(.-2 -+$22.41-2' 2$7/+("(3+8#$2(&- 3$# -(-#(5(#4 +.41-2(R) product as meeting the requirements of a particular industry 23 -# 1#$& .1 / 13("4+ 104 +(=" 3(.-$&+(23$#.11$".&-(9$#.41-2(2-.31$2/.-2(!+$%.1 -8 % (+41$.% -(-#(5(#4 +.41-2(R)/1.#4"33.,$$33'$1$04(1$,$-32.%24"'(-#4231823 -# 1#.1/ 13("4+ 104 +(=" 3(.-2$12 of Bourns(R) products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1#$5("$2.1 //+(" 3(.-2 Bourns(R)/1.#4"32 1$-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$#%.142$(--4"+$ 1+(%$2 5(-&+(%$"1(3(" +.1+(%$2423 (-(-& //+(" 3(.-2-.1(- -8.3'$1 //+(" 3(.-26'$1$% (+41$.1, +%4-"3(.-, 81$24+3(-/$12.- +(-)418#$ 3'.12$5$1$/1./$138 .1$-5(1.-,$-3 +# , &$-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2 on a case-by-case basis, use of any Bourns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ourns(R)23 -# 1#/1.#4"32 1$-.33$23$#3.".,/+86(3'-(3$#3 3$2$#$1 +5( 3(.-#,(-(231 3(.-23 -# 1#2&$-$1 ++8 .1 -8.3'$1&$-$1 ++8$04(5 +$-3&.5$1-,$-3 +.1& -(9 3(.-23 -# 1# //+(" !+$3./1.#4"32#$2(&-$#.1, -4% "341$#%.1 42$(- (1"1 %3.12/ "$ //+(" 3(.-2.41-2$7/1$22+8(#$-3(=$2.41-2(R) standard products that are suitable for use in aircraft .12/ "$ //+(" 3(.-2.-24"'/1.#4"32<# 3 2'$$32(-3'$2$"3(.-$-3(3+$#://+(" 3(.-2;-+$22$7/1$22+8 -#2/$"(=" ++8 //1.5$#(-61(3(-&!836. 43'.1(9$#.41-21$/1$2$-3 3(5$2.- " 2$!8" 2$! 2(242$.% -8.3'$1.41-2(R) standard /1.#4"3(- - (1"1 %3.12/ "$ //+(" 3(.-,(&'3-.3!$2 %$ -#3'42(2-.31$".,,$-#$# 43'.1(9$#.1(-3$-#$# -#(2 3 the user's sole risk. '$42$ -#+$5$+.%3$23(-& //+(" !+$3..41-2(R) custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns(R)"423.,/1.#4"32 1$2/$"( ++8#$2(&-$#!2$-3 61(33$- &1$$,$-3!$36$$-.41-2 -#3'$42$11$& 1#(-&3'$42$ -#+$5$+.%24"'3$23(-&3'$ !.5$/1.5(2(.-2 //+(" !+$3..41-2(R) standard products shall also apply to such Bourns(R) custom products. Users shall not sell, transfer, export or re-export any Bourns(R)/1.#4"32.13$"'-.+.&8%.142$(- "3(5(3($26'("'(-5.+5$3'$ #$2(&-#$5$+./,$-3/1.#4"3(.-42$.123."*/(+(-&.%-4"+$ 1"'$,(" +.1!(.+.&(" +6$ /.-2.1,(22(+$2-.12' ++3'$842$ Bourns(R)/1.#4"32.13$"'-.+.&8(- -8% "(+(386'("'$-& &$2(- "3(5(3($21$+ 3(-&3.24"'#$5("$2'$%.1$&.(-&1$231("3(.-2 //+83. ++42$2 -# //+(" 3(.-23' 35(.+ 3$- 3(.- +.1(-3$1- 3(.- +/1.'(!(3(.-2(-"+4#(-&$,! 1&.2.1(-3$1- 3(.- + 1$&4+ 3(.-2413'$1.41-2(R) products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns(R) products may not, without /1(.1 43'.1(9 3(.-%1.,.41-2 -#.13'$.5$1-,$-3!$1$2.+#31 -2%$11$#.11$$7/.13$#3. -8/ 138-.3$+(&(!+$ 3.1$"$(5$".,,.#(3($22.%36 1$ -#3$"'-(" +# 3 .3'$, 7(,4,$73$-3/$1,(33$#!8 //+(" !+$+ 6.41-2#(2"+ (,2( -8 -# +++( !(+(38%.12/$"( +/4-(3(5$".-2$04$-3( + (-"(#$-3 +.1(-#(1$"3# , &$2.1+.231$5$-4$2.1+.23/1.=32 -#(( -8 -# ++(,/+($#6 11 -3($2(-"+4#(-&(,/+($#6 11 -3($2 .%=3-$22%.1/ 13("4+ 1/41/.2$-.-(-%1(-&$,$-3 -#,$1"' -3 !(+(38 bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf