This is information on a product in full production.
June 2014 DocID6629 Rev 9 1/8
Z00607
Standard 0.8 A Triacs
Datasheet
-
production data
Features
•On-state rms current = 0.8 A
•Repetitive peak off-state voltage = 600 V
•Gate triggering current = 5 mA
Description
The Z00607 is suitable for low power AC
switching applications. Typical applications
include home appliances (electrovalve, pump,
door lock, small lamp control), fan speed
controllers,...
Thanks to the low gate triggering current these
triacs can be driven directly by microcontrollers.
A2
A1
G
TO-92
Z00607MA SOT-223
Z00607MN
G
A1
A2
A2
G
A1
A2
www.st.com
Characteristics Z00607
2/8 DocID6629 Rev 9
1 Characteristics
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
I
T(RMS)
On-state rms current
(full sine wave) SOT-223 T
tab
= 85 °C 0.8 A
TO-92 T
L
= 50 °C
I
TSM
Non repetiti ve su rge pea k on-s t ate
current (full cycle, T
j
initial = 25 °C) F = 50 Hz t = 20 ms 9 A
F = 60 Hz t = 16.7 ms 9.5
I
²
tI
²
t Value for fusing t
p
= 10 ms 0.45 A
²
s
dI/dt Cr itical rate of rise of on-st ate current I
G
= 2 x I
GT
, t
r
≤ 100 ns F = 120 Hz T
j
= 110 °C 20 A/µs
I
GM
Peak gate current t
p
= 20 µs T
j
= 110 °C 1 A
P
G(AV)
Average gate power dissipation T
j
= 110 °C 0.1 W
T
stg
T
j
Storage junction temperature range
Operating junction temperature range - 40 to + 150
- 40 to + 110 °C
Table 2. Electrical characteristics (T
j
= 25 °C, unless otherwise specified)
Symbol Test Conditions Quadrant Value Unit
I
GT (1)
V
D
= 12 V, R
L
= 30 Ω
I - II - III MAX 5mA
IV 7
V
GT
ALL MAX 1.3 V
V
GD
V
D
= V
DRM,
R
L
= 3.3 kΩ, Τ
j
= 110 °Χ ALL MIN 0.2 V
I
H (2)
I
T
= 200 mA MX. 5 mA
I
L
I
G
= 1.2 I
GT
I - III - IV MAX 10 mA
II 20
dV/dt
(2)
V
D
= 67% V
DRM
, gate open Τ
j
= 110 °Χ MIN 10 V/µs
(dV/dt)c
(2)
(δς/δτ)χ = 0.35 Α/μσ, Τ
j
= 110 °Χ MIN 1.5 V/µs
1. minimum I
GT
is guaranteed at 5% of I
GT
max.
2. for both polarities of A2 referenced to A1.
Table 3. Static characteristics
Symbol Test Conditions Value Unit
V
TM(1)
I
TM
= 1.1 A t
p
= 380 µs T
j
= 25 °C MAX. 1.5 V
V
to (1)
Threshold voltage T
j
= 11 0 °C MAX. 0.95 V
R
d (1)
Dynamic resistance T
j
= 110 °C MAX. 420 mΩ
I
DRM
I
RRM
V
DRM
= V
RRM
= 600 V T
j
= 25 °C MAX. 5µA
T
j
= 110 °C 0.1 mA
1. for both polarities of A2 referenced to A1.
DocID6629 Rev 9 3/8
Z00607 Characteristics
8
Table 4. Thermal resistances
Symbol Parameter Value Unit
R
th(j-t)
Junction to tab (AC) SOT-223 25 °C/W
R
th(j-I)
Junction to lead (AC) TO-92 60
R
th(j-a)
Junction to ambient S
(1)
= 5 cm
²
SOT-223 60 °C/W
TO-92 150
1. S = Copper surface under tab.
Figure 1. Maximum power dissipation
versus RMS on-state current
(full cycle)
Figure 2. Relative variation of gate trigger,
holding and latching current versus junction
temperature
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0 P(W)
I (A)
T(RMS)
-40 -20 0 20 40 60 80 100 120
0.0
0.5
1.0
1.5
2.0
2.5
I,I,I[T] /
GTHL j
I , I , I [T =25°C]
GTHL j
T (°C)
j
IGT
IH&I
L
Typical values
Figure 3. Surge peak on-state current versus
number of cycles Figure 4. Non-repetitive surge peak
on-state current and corresponding value of I
2
t
1 10 100 1000
0
1
2
3
4
5
6
7
8
9
10
One cycle
t=20ms
I (A)
TSM
Number of cycles
Non repetitive
T initial = 25°C
j
Repetitive
T = 25°C
amb
0.01 0.10 1.00 10.00
0.1
1.0
10.0
100.0
200.0
t (ms)
p
I (A), I t (A s)
TSM 22
It
2
dI/dt limitation:
20A/µs
T initial = 25°C
j
I
TSM
Sinusoidal pulse with width tp< 10 ms
Characteristics Z00607
4/8 DocID6629 Rev 9
Figure 5. On-state characteristics
(maximum values) Figure 6. Relative variation of critical rate
of decrease of main current versus (dV/dt)c
(typical values)
I (A)
TM
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0.1
1.0
10.0
V (V)
TM
T = max.
jTj
T = 25°C
j
T=max.
j
V =0.95 V
R =420 m
t0
d
Ω
Figure 7. Relative variation of critical rate of
decrease of main current versus junction
temperature
Figure 8. SOT-223 Thermal resistance junction
to ambient versus copper surface under tab
0 10 20 30 40 50 60 70 80 90 100 110
0
1
2
3
4
5
6
(dI/dt)c [T ] / Specified]
j(dI/dt)c [Tj
T (°C)
j
R (°C/W)
th(j-a)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
0
10
20
30
40
50
60
70
80
90
100
110
120
130
S(cm²)
Printed circuit board FR4,
copper thickness = 35 µm
DocID6629 Rev 9 5/8
Z00607 Ordering information scheme
8
2 Ordering information scheme
Figure 9. Ordering information scheme
Z 006 07 M A Blank 1BA2
Triac series
Current
Sensitivity
Voltage
Package
Packing mode
006 = 0.8A
07 = 5mA
M = 600V
A = TO-92
N = SOT-223
1BA2 = TO-92 Bulk
2BL2 = TO-92 Ammopack
5BL2 = TO-92 Tape and reel
5AA4 = SOT-223 Tape and reel
Packagi ng infor m atio n Z00607
6/8 DocID6629 Rev 9
3 Packaging information
•Epoxy meets UL94, V0
•Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK
®
is an ST trademark.
Figure 10. Footprint (dimensions in mm)
Table 5. SOT-223 dimensions
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.80 0.071
A1 0.02 0.10 0.001 0.004
B 0.60 0.70 0.85 0.024 0.027 0.033
B1 2.90 3.00 3.15 0.114 0.118 0.124
c 0.24 0.26 0.35 0.009 0.010 0.014
D
(1)
1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches)
6.30 6.50 6.70 0.248 0.256 0.264
e2.3 0.090
e1 4.6 0.181
E
(1)
3.30 3.50 3.70 0.130 0.138 0.146
H 6.70 7.00 7.30 0.264 0.276 0.287
V10° max
A
A1
e1
D
B1
HE
e
12
4
3
B
Vc
3.25
1.32
7.80
5.16
1.32
2.30 0.95
DocID6629 Rev 9 7/8
Z00607 Ordering information
8
4 Ordering information
5 Revision history
Table 6. TO-92 dimensions
Ref.
DIMENSIONS
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.35 0.053
B 4.70 0.185
C 2.54 0.100
D 4.40 0.173
E 12.70 0.500
F 3.70 0.146
a 0.50 0.019
A
F
C
B
a
DE
Table 7. Ordering information
Ordering type Marking Package Weight Base
quantity Delivery
mode
Z00607MA 1BA2 Z0607MA
TO-92 0.2 g
2500 Bulk
Z00607MA 2BL2 Z0607MA 2000 Ammopack
Z00607MA 5BL2 Z0607MA 2000 Tape and reel
Z00607MN 5AA4 Z06M SOT-223 0.12 g 1000 Tape and reel
Table 8. Document revision history
Date Revision Changes
Oct-2001 4 Last update.
25-Mar-2005 5 Package: TO-92 tape and reel delivery mode 5BL2 added.
21-Jun-2005 6 Markings updated from Z006xxxx to Z06xxxx
13-Sep-2005 7 Z00607MA 2BL2: marking corrected from 00607mA to
Z0607MA
12-Apr-2007 8 Reformatted to current standard. Added SOT-223 package.
Changed Tj from +125 to +110 in Table 1
19-Jun-2014 9 Updated marking for Z00607MN 5AA4 in Table 7.
Z00607
8/8 DocID6629 Rev 9
Please Read Carefully:
Informa tion in this do cument is prov ided solely in connec tion with ST products. STMic roelect ronics NV and its subsidiari es (“ST”) reser ve the
right to mak e chang es, c or recti ons , modif ic ations or improv ement s, t o th is documen t, and the prod ucts an d servic es des crib ed he rein a t any
time, without notice.
All ST produ cts are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, select ion or use of the ST products and serv ices described herein.
No license, express o r implied, by es toppel or otherwise, t o any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST produ cts with provis ions different f rom the statement s and/or technic al features set forth in this document shall i mmediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, a ny
liabili ty of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document su persedes and replaces all information previously supplied.
The ST logo is a registered tr ademark of STMicroelectronics. All other names are the propert y of their res pective owners.
© 2014 STMicroelec tronics - All rights re se rved
STMicroelectronics group of compani es
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United St ates of America
www.st.com