PRODUCT DATASHEET
Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specications are subject to change without notice. Images shown may vary slightly from the actual product.
NETCOMM WIRELESS LIMITED
Head Ofce - 18-20 Orion Road, Lane Cove,
NSW 2066,
Sydney, Australia ABN 85 002 490 486
E: sales@netcommwireless.com
NetComm
www.netcommwireless.com
PROCESSOR & STORAGE
• Powerful 450Mhz ARM9 processor with 64MByte DDR2 Ram
• 256MByte Flash memory storage (~120MB available on board
space for user storage)
OPERATING SYSTEM
• Embedded Linux 3.6
DATA R ATES
• EV-DO Rev.A data rates: FL max. 3.1Mbps, RL max. 1.8Mbps
• 1xRTT Advanced data rates: FL max. 307.2kbps, RL max.
3 07.2k bp s
CELLULAR BANDS
• CDMA (BC0/BC1), 800/1900MHz
CONNECTIVITY
• 1x (RJ-45) 802.3af Power over Ethernet (PoE) 10/100Base-TX Port
with Auto MDIX
RESET BUTTON
• Reset button (recessed, requiring pen/paperclip) with three
functions: Reboot, reboot into recovery mode, and reset unit to
factory defaults
ANTENNAS
• 2x internal cellular antennas (1x main antenna and 1x receive
diversity antenna)
ANTENNA CONNECTORS
• 1x SMA connector for optional external main antenna (including
mechanical RF switch for auto changeover to external antenna)
LED INDICATORS
• 7x tri-colour LEDs. Power, Network and 5x Signal Strength indicators
• Easy and clear LED status display for connection status, connected
network type, and connection errors
CELLULAR
• NATDisableforframedrouteconguration
• Transparent bridge mode using PPPoE to allow the router to
transparently forward Public WAN IP address to a downstream device
NETWORK &ROUTING
• Static Routing, RIP (v1/v2), Port Forwarding and DMZ
• Dynamic DNS
• VRRP for redundant router failover
• DHCP Server, including :
o Address reservation by MAC address
o CustomDNSserverdenitions
o DHCP Relay
o DHCP list display in Web-UI
o AdvancedDHCPOptionconguration(Option42NTP,Option
66 TFTP, Option 150, Option 160)
VPN
• PPTP Client for VPN connectivity to remote PPTP VPN Server
• IPSec tunnel termination (for up to 5 tunnels)
• GRE Tunnelling
• OpenVPN (Client, Server and P2P)
ADMINISTRATION & CONFIGURATION
• Web-based User Interface (HTTP/HTTPS) for full device status and
conguration
• Passwordprotectedcongurationlebackupandrestoreforquick
devicecongurationanddevicecloning
• TelnetCommandLineInterfaceforstatusmonitoring,conguration
and control
• SNMPv1/v2includingcellularspecicMIB,congandrmwaredownload
• TR-069Clientforremotedeviceconguration,conguration
backupandrestore,andrmwareupgrade
• SMS Client (Send/Receive) including inbox, outbox
• Ping monitor watchdog (Reset connection on repeated ping failure)
• Diagnostic Log Viewer (remote and local)
• System Status and Security Logs
• NTP Server Support for network time sync of device’s system clock
• Device User Guide stored on the device and accessible via the
Web-based User Interface (HTTP/HTTPS)
Advanced Diagnostics and Control via SMS
o Query status information – such as Signal Strength, WAN IP,
Uptime, and many more
o ConguredeviceremotelyviaSMS
o Execute commands via SMS – such as reboot, reset to
defaults,goofine,andmanymore
o Secure SMS management using sender whitelisting and
password management
o SMS acknowledgement replies for queries and commands
FIRMWARE MANAGEMENT
• Firmware Upgrade locally via LAN or remotely Over-The-Air
(HTTP/HTTPS, SNMP, TR-069)
• Multiplermwareimagestorageondeviceanddynamicinstall
• TriggeredrmwareupgradeviaSMS(initiatedownload&install
from HTTP/HTTPS)
SOFTWARE DEVELOPMENT KIT
• Develop and install custom software applications
• Open Linux standard development environment
• Develop applications/scripting in standard ANSI C/Shell script
and LUA
• Package manager built into Web-UI for Application installation/
removal
• API (C, LUA and Shell libraries) to the unit’s internal Runtime
Databasetoallowfullstatusmonitoringcongurationand
control of the device from custom applications
TEMPERATURE
• Operating Temperature Range: -40°C ~ +80°C
• Storage Temperature Range: -40°C ~ +85°C
POWER SUPPLY
• DC Power input via 2 pin connector (8 - 35V DC) or optionally
via 802.3af Power over Ethernet (PoE)
• Recommended power input rating of 6W via DC Jack (e.g 12V
1.5A), or Class 0 Power Level via PoE
• Field terminable power input via screw type terminal block
included(No.3at-headscrewdriverrequired)
• 60v load dump protection on DC Input Jack.
• Dual power mode supported (PoE primary, seamless failover to
DC Jack on PoE loss)
DIMENSIONS, WEIGHT & MOUNTING
• Device dimensions (excluding external antenna): 140mm (L) x
103mm (W) x 30mm (D) / 180g
• Wall mount support in multiple orientations via embedded
mounting holes
• DIN Rail mount support via plastic bracket included in box (Top
hat section rail TH 35 IEC60715)
• C Rail mount support via mounting rail built into housing (C
section rail C30 IEC60715 )
REGULATORY COMPLIANCY
• FCC
*Specicationssubject to change without notice
The NWL-11 series is a high performing dual band CDMA Router
that delivers the high speed and wide coverage afforded by
Verizon’s CDMA network. Designed for plug and play Ethernet IP
connectivity, its lightweight, compact design makes it suitable for
a broad range of industry applications. The device incorporates
state-of-the-art M2M features; internal antennas, with an external
antennaoption;exiblemountingoptions;widetemperature
rangeandexiblepoweringoptions.
The device enables you to remotely connect your assets,
premises or equipment to gather real-time business insight
and streamline your business operations. The routers open
Linux operating system and Software Development Kit (SDK)
offers the capability to install custom software applications
withinthesubstantialonboardashmemory.Thedevicealso
allows remote system monitoring, remote diagnostics, remote
congurationandrmwareupdatesovertheair.
M2M CDMA Router
SPECIFICATIONS
Cellular Tower
Server
Internet
CCTV
Remote Location
APPLICATION
EXAMPLES