Inductive sensor BI1-EH04-AP6X Smooth barrel, O 4 mm Stainless steel, 1.4427 SO DC 3-wire, 10...30 VDC NO contact, PNP output Cable connection Wiring diagram Type code Ident no. BI1-EH04-AP6X 4609540 Rated operating distance Sn Mounting condition Assured switching distance Repeatability Temperature drift Hysteresis Ambient temperature 1 mm flush (0,81 x Sn) mm 2 % of full scale 10 % 3...15 % -25...+70 C Operating voltage Residual ripple DC rated operational current No-load current I0 Residual current Rated insulation voltage Short-circuit protection Voltage drop at Ie Wire breakage / Reverse polarity protection Output function Switching frequency 10...30VDC 10 % Uss 100 mA 15 mA 0.1 mA 0.5 kV yes/ cyclic 1.8 V yes/ complete 3-wire, NO contact, PNP 3 kHz Construction Dimensions Housing material Material active area End cap Connection Cable quality Cable cross section smooth barrel, 4 mm 30 mm stainless steel, 1.4427 SO plastic, PA Plastic, PA12 cable 3 mm, LifY-11Y, PUR, 2m Vibration resistance Shock resistance Protection class MTTF 3 x 0.14 mm 55 Hz (1 mm) 30 g (11 ms) IP67 2283 years acc. to SN 29500 (Ed. 99) 40 C Switching state LED yellow Functional principle Inductive sensors detect metal objects contactless and wear-free. For this, they use a high-frequency electromagnetic AC field that interacts with the target. Inductive sensors generate this field via an RLC circuit with a ferrite coil. We offer special versions for temperatures of -60 C up to +250 C. Edition * 2014-10-24T14:11:34+02:00 2 1/3 Hans Turck GmbH & Co.KG n D-45472 Mulheim an der Ruhr n Witzlebenstrae 7 n Tel. 0208 4952-0 n Fax 0208 4952-264 n more@turck.com n www.turck.com Inductive sensor BI1-EH04-AP6X 2xB Distance W 3 x Sn Distance T 3xB Distance S 1.5 x B Distance G 6 x Sn Diameter of the active area B O 4 mm Edition * 2014-10-24T14:11:34+02:00 Distance D 2/3 Hans Turck GmbH & Co.KG n D-45472 Mulheim an der Ruhr n Witzlebenstrae 7 n Tel. 0208 4952-0 n Fax 0208 4952-264 n more@turck.com n www.turck.com Inductive sensor BI1-EH04-AP6X Accessories Type code Ident no. Description BS 540 69475 Fixing clamp; material mounting block: Anodized aluminium; Design clamp sleeve: Steel 69477 Fixing clamp; material mounting block: Anodized aluminium Edition * 2014-10-24T14:11:34+02:00 MBS40 3/3 Hans Turck GmbH & Co.KG n D-45472 Mulheim an der Ruhr n Witzlebenstrae 7 n Tel. 0208 4952-0 n Fax 0208 4952-264 n more@turck.com n www.turck.com