440 440-030 EMI/RFI Banding and Shrink Boot Adapter Rotatable Coupling - Standard Profile 440 F S 030 M 20 12-8 B P T S CONNECTOR DESIGNATORS A-F-H-L ROTATABLE COUPLING Product Series Slot Option (Omit if not required) Connector Designator Shrink Boot (Table IV Omit for none) Angle and Profile H = 45 J = 90 S = Straight Polysulfide (Omit for none) B = Band K = Precoiled Band (Omit for none) Basic Part No. Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Finish (Table II) Cable Entry (Table IV) Shell Size (Table I) Length .060 (1.52) Min. Order Length 1.5 in. (See Note 4) O-Ring Length .060 (1.52) Min. Order Length 2.0 in. .135 (3.4) Typ A Thread Typ. (Table I) .075 (1.9) Ref Typ C Typ. (Table I) STYLE 2 STRAIGHT (See Note 1) K Typ* Sym S Straight .380 (9.7) Typ Knurl Style Mfr Option - Typ .88 (22.4) Max E (Table III) L Typ* M Typ* *(Table IV) .060 (1.5) Typ G (Table III) 45 F (Table III) STYLE 2 45 & 90 (See Note 1) Band Option (K Option Shown See Note 6) (c) 2005 Glenair, Inc. Sym H 45 Sym J 90 Termination Area Free Of Cadmium. Knurl Or Ridges Mfrs Option H (Table III) .146 S Option See Part Number Development Polysulfide Stripes P Option J CAGE Code 06324 Rev. 11.10.14 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 12 www.glenair.com 440 440-030 EMI/RFI Banding and Shrink Boot Adapter Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E *** G *** F H *** Conn. Desig. Max Max Max Max H A-F-L .531 (13.5) .639 (16.2) .940 (23.9) 1.110 (28.2) 09 08 .594 (15.1) .664 (16.9) 1.000 (25.4) 1.140 (29.0) 11 10 .618 (15.7) .688 (17.5) 1.050 (26.7) 1.160 (29.5) 13 12 .656 (16.7) .705 (17.9) 1.090 (27.7) 1.190 (30.2) 15 14 .688 (17.5) .732 (18.6) 1.150 (29.2) 1.210 (30.7) 17 16 .748 (19.0) .803 (20.4) 1.190 (30.2) 1.221 (31.0) 19 18 .773 (19.6) 1.031 (26.2) 1.250 (31.8) 1.281 (32.5) 21 20 .800 (20.3) 1.156 (29.4) 1.320 (33.5) 1.351 (34.3) 23 22 .823 (20.9) 1.219 (31.0) 1.380 (35.1) 1.410 (35.8) 25 24 1.041 (26.4) 1.281 (32.5) 1.500 (38.1) 1.531 (38.9) 28 1.092 (27.7) 1.593 (40.5) 1.620 (41.1) 1.651 (41.9) 32 1.136 (28.9) 1.718 (43.6) 1.750 (44.5) 1.781 (45.2) 36 *** These maximum dimensions are increased by .187 (4.7) when parts are fabricated from stainless steel, and connector designator is "S". Dash No. 01 31 02 32 03 33 04 34 05 35 06 36 07 37 08 38 09 10 11 12 13 14 15 16 TABLE IV: CABLE ENTRY .125 .170 .170 .170 .250 .250 .250 .250 .500 .500 .500 .500 .500 .500 .500 .500 .500 .750 .750 1.000 1.000 1.000 1.000 1.000 J (3.2) (4.3) (4.3) (4.3) (6.4) (6.4) (6.4) (6.4) (12.7) (12.7) (12.7) (12.7) (12.7) (12.7) (12.7) (12.7) (12.7) (19.1) (19.1) (25.4) (25.4) (25.4) (25.4) (25.4) (c) 2005 Glenair, Inc. K L .125 (3.2) .250 (6.4) .188 (4.8) .312 (7.9) .250 (6.4) .375 (9.5) .312 (7.9) .438 (11.1) .375 (9.5) .500 (12.7) .438 (11.1) .562 (14.3) .500 (12.7) .625 (15.9) .562 (14.3) .688 (17.5) .625 (15.9) .750 (19.1) .688 (17.5) .812 (20.6) .750 (19.1) .875 (22.2) .812 (20.6) .938 (23.8) .875 (22.2) 1.000 (25.4) .938 (23.8) 1.062 (27.0) 1.000 (25.4) 1.125 (28.6) 1.062 (27.0) 1.188 (30.2) 1.125 (28.6) 1.250 (31.8) 1.250 (31.8) 1.375 (34.9) 1.375 (34.9) 1.500 (38.1) 1.500 (38.1)1.625 (41.3) 1.625 (41.3) 1.750 (44.5) 1.750 (44.5) 1.875 (47.6) 1.875 (47.6) 2.000 (50.8) 2.000 (50.8) 2.125 (54.0) M .312 (7.9) .374 (9.5) .437 (11.1) .500 (12.7) .562 (14.3) .624 (15.8) .687 (17.4) .750 (19.1) .812 (20.6) .874 (22.2) .937 (23.8) 1.000 (25.4) 1.062 (27.0) 1.124 (28.5) 1.187 (30.1) 1.250 (31.8) 1.312 (33.3) 1.437 (36.5) 1.562 (39.7) 1.687 (42.8) 1.812 (46.0) 1.937 (49.2) 2.062 (52.4) 2.187 (55.5) CAGE Code 06324 Shrink Boot 770-003S111 770-003S111 770-003S112 770-003S112 770-003S103 770-001S104 770-001S104 770-001S104 770-001S104 770-001S104 770-001S105 770-001S105 770-001S105 770-001S105 770-001S106 770-001S106 770-001S107 770-001S107 770-001S107 770-001S107 770-001S108 770-001S108 770-001S109 770-001S109 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Interface O-Ring not supplied with Connector Designator A. 4. Consult factory for shorter lengths on straight backshells. 5. See page 40 Shrink Boot Reference Information. 6. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Rev. 10.12.18 Now Available with the "NESTOR" Add "-445" to Specify Glenair's Non-Detent, Spring-Loaded, SelfLocking Coupling. See Page 41 for Details. Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 13 www.glenair.com