D-subminiature Metal Shell Solder Cup, Right-Angle, and Vertical PCB Series 1 - High Reliability Available in vertical and right-angle dip solder PCB connectors and solder cup version for wire termination. Commercial version of M24308 military connectors with tin-plated or zinc-plated shell and 30pin. gold plating. Monoblock green dially! phthalate insulator for improved electrical performance. Machined contacts for precision performance. Offered in 9, 15, 25, 37, and 50 (except right-angle version) position plugs and sockets. Offered with .120 mounting holes, 4-40 clinch nuts (except right-angle version), or dual float bushings (except right-angle version). Approvals: UL Recognized - Files E170218 (UL1977)and E130965 (UL1863). CSA Approved - File LR31996. See pages 4-5 thru 4-10 for standard dimensions, contact arrangements, and panel mounting specifications. insulator Material: Glass-filled diallyl phthalate (green) UL 94V-0 rated Connector Shell: Steel with zinc plating and yellow chromate finish or tin plating (grounding indents on plug) Contact Material: Plug - Brass (machined), Socket - Phosphor bronze (machined) Contact Plating: 30pin. gold over nickel 4-40 Clinch Nut: Steel with cadmium plating and yellow chromate finish Dual Float Bushing: Stainless steel, passivated Operating Temperature: -65C to + 125C Shock: 50G peak per MIL-STD-202, Method 213, Condition G Vibration: 12 cycles in three perpendicular directions @ 10-2000Hz, per MIL-STD-202, Method 204, Condition D Moisture Resistance: 90-95% relative humidity @ 40C for 96 hours per MIL-STD-202, Method 103 Withstanding Voltage: Minimum 1250V RMS @ sea level Current Rating: 5 Amps Contact Resistance: 2.7 milliohms maximum insulation Resistance: 5000 megohms maximum (initial); 1000 megohms (minimum) after environmental testing Individual Contact Insertion and Separation Force (minimum/maximum): 0.7 02./12 oz. Durability: 500 mating cycles Call Toll Free: 1 (800) 323-9612 4-48 10/199ED-subminiature Metal Shell Solder Cup i Cinch Series 1 - High Reliability * Will accommodate up to 20 AWG wire. 390 (9.91) |e .200 (5.08) REF. - HE _ Ordering Information Solder Cup Plugs Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings 9 _DEM-9P DEME-9P =; DEMY-9P DEM-9PT| = DEME-9PT|_ DEMY-9PT! 15 DAM-15P_ ss DAME-15P_ ss DAMY-15P_DAM-1SPTI_- DAME-1SPT|_ DAMY-15PTI 25 DBM-25P_ ss DBME-25P =: DBMY-25P (DBM-25PTI_DBME-25PT|DBMY-25PTI 37 DCM-37P_ ss DCME-37P,_ = DCMY.87P DCM-S7PT|_ __DCME-37PT! DCMY-37PTI 50. DDM-50P DDME-5OP == DDMY-50P DDM-SOPT| DDME-50PTI DDMY-5OPTI Solder Cup Sockets Zinc-Piated Shell with Yellow Chromate Finish Tin-Plated Shell Positions Mounting Hole 4-40 Clinch Nut Dual Float Bushings Mounting Hole 4-40 Clinch Nut Dual Float Bushings _DEM-9S- ssDEEMEE--9S _DEMY-95 _ DEM-9ST _ DEME-9ST DEMY-9ST 15 DAM-15S _ DAME-15S _ DAMY-15S DAM-15ST _DAME-15ST = DAMY-15ST 25 DBM-25S_(DBME-25S_ DBM Y-25S _DBM-258T -DBME-25ST_ =: DBMY-25ST 37 DCM-378 _ DCME-37S_ DCMY-37S DCM-37ST DOME-37ST _ DCMY-37ST 50 _DDM-50S_ __DDME-50S_: DDMY-50S_ ss DDM-SOST __-DDME-50ST__ DDMY-S0ST 10/1998 4-49 Call Toll Free: 1 (800) 323-9612D-subminiature Metal Shell Right-Angle Dip Solider PCB Series 1 - High Reliability * .283" footprint uses minimal board space. Available with three contact tail lengths (.125", Materials .158", and .185") and two contact diameters (.030" and .040"). Mounting bracket: Black nylon. Can be removed if necessary. Ordering Information Right-Angle PCB Plugs Zinc-Plated Shell with Yellow Chromate Finish 112 (2.84) r SEE CHART 125 Tail Length .158 Tail Length .185 Tall Length .125TailLength .158TailLength | .185 Tall Length Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 _ DEM-9PD DEM-SPL DEM-9PS DEM-9PA DEM-9PG DEM-9PW_ 15 DAM-15PD DAM-15PL DAM-15PS- / (DAM-15PG =: DAM-15PW_ 25 DBM-25PD DBM-25PL_ ~ DBM-25PS _ DBM-25PA _ DBM-25PG s- DBM-25PW 37 DCM-37PD _DCM-37PL DCM-37PS DCM-37PA _ DCM-37PG == DCM-37PW_| Tin-Plated Shell with Grounding Indents _ __ 125 Tail Length .158Tail Length .185TailLength .125TailLength .158TailLength .185 Tail Length Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter 9 DEM-9PDTI DEM-9PLT! DEM-OPSTI ss DEM-9PATI DEM-9PGTI 415 DAM-15PDTI DAM-15PLTI DAM-15PSTI_ DAM-15PGTI_ 25 DBM-25PDTI DBM-25PLT!| = DBM-25PSTI. DBM-25PAT| ==: DBM-25PGTI DE 37 ~ DCM-37PDTI ~ DCM-37PLTI DCM-37PSTI DCN-37PAT! DCM-37PGTI Call Toll Free: 1 (800) 323-9612 4-50 10/1898D-subminiature Metal Shell Right-Angle Dip Solder PCB Series 1 - High Reliability Cinch Ordering Information Right-Angle PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish 4125 Tall Length .158 Tail Length .185TallLength .125TailLength .158TallLength .185 Tail Length Positions .030 Contact .030 Contact .030 Contact 040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9_______DEM-98D DEM-OSLssC=DEM-OSS_ CDEM-OSA Ss C(DEM-9SG =: DEM -OSW 415 sdDAM-15SD_ssDAN-15SL_sDAM-15SS DAM-15SA_ ss DAM-15SG DAM-15SW 28 ~ DBM-25SD _ ____DBM-25SL ____DBM-258S DBM-25SA _ DBM- 258G _ DBM-25SW_ 37 _ DCM-378D _ DCM-37SL _ DCM-378S DCM-37SA DCM-37SG DCM-37SW_ Tin-Piated Shell _ 125 Tail Length 158 Tail Length .185TaliLength .125 Tail Length .158Tail Length .185 Tail Length Positions .030 Contact .030 Contact .030 Contact .040 Contact ,.040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter _ ____sDEM-9SDT DEM-9SLT ==--- DEM-9SST DEM-9SAT DEM-9SGT DEM-9SWT _ 15 DAM-15SDT DAM-15SLT_ stDAM-15SST DAM. 15SAT DAM-15SGT DAM-15SWT 25 DBM-25SDT__DBM-25SLT ss DBM-25SST__s DBM-25SAT = DBM-25SGT = DBM-25SWT 387 DCM-37SDT ss DCM-37SLT_ ss DCM-37SST ss DCM-37SAT ss DOM-37SGT____ DCM-37SWT 10/1988 4-51 Call Toll Free: 1 (800) 323-9612D-subminiature Metal Shell Vertical Dip Solder PCB ECinch Series 1 - High Reliability Available with three contact tail lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). w, = SEE CHART === = SEE CHART .200 REF. . i Ordering Information Vertical PCB Plugs Zinc-Plated Shell with Yellow Chromate Finish -125TallLength .158TailLength .185TailLength .125TailLength .158Tail Length .185 Tail Length Positions .030 Contact .030 Contact .030 Contact -040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter ce DEM-SPE | DEM-9PM _DEM-9PZ DEM-9PB DEM-9PH DEM-SPX 15 ~sDAM-15PE _ DAM-15PM DAM-15PZ _ DAM-15PB DAM-15PH DAM-15PX 28 DBM-25PE DBM-25PM_ DBM-25P2 DBM-25PB _ DBM-25PH DBM-25PX 37 _DCM-37PE DCM-37PM DCM-37PZ DCM-37PB DCM-37PH DCM-37PX 50 DDM-50PE = = DDM-SOPM =s_- DDM-S0PZ_ DDM-50PB DDM-50PH DDM-50PX Zinc-Plated Shell with Yeliow Chromate Finish and 4-40 Clinch Nuts .125 Tail Length .158TailLength .185TailLength .125TailLength .158Tail Length .185 Tail Length Positions .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9. DEME-9PE_ DEME-9PM sDEME-9PZ_ = DEME-9PB_ = DEME-9PH DEME-9PX_ 15 = DAME-15PE =: DAME-15PM DAME-15PZ. DAME-15PB _ DAME-15PH == = DAME-15PX 25 DBME-25PE DBME-25PM _-DBME-25PZ =--~DBME-25PB_~DBME-25PH == DBME-25PX 37 ___DCME-37PE_ DCME-37PM DCME-37PZ DCME-37PB =DCME-37PH DCME-37PX 50 DDME-50PE _ DDME-50PM = DDME-50PZ _DDME-50PB DDME-50PH DDME-50PX Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings .125 Tail Length .158TaliLength .185TailLength .125TailLength .158TailLength .185 Tail Length Positions -030 Contact .030 Contact -030 Contact .040 Contact .040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEMY-9PE -~dDEMY-9PM_s;DEMY-9PZ DEMY-9PB. ss DEMY-9PH_ dDEMY-9PX 15. sDAMY-15PE =sDAMY-15PM_=s DAMY-15PZ_ DAMY-15PB = DAMY-15PH DAMY-15PX 25 DBMY-25PE DBMY-25Ph DBMY-25PZ DBMY-25PB - DBMY-25PH DBMY-25PX 37 DCMY-37PE = DCMY:37PM_s DCMY-37PZ DCMY-37PB_ ss DCMY-37PH_ = DCMY-37PX 50 -*DDMY-SOPE ==: DDMY50PM_)s DDMY-S0PZ DDMY-50PB DDMY-SOPH DDMY-50PX Call Toll Free: 1 (800) 323-9612 4-52 10/1998D-subminiature Metal Shell Vertical Dip Soider PCB Series 1 - High Reliability ki Cinch Ordering Information Vertical PCB Plugs (Cont'd) Tin-Plated Shell with Grounding Indents 125 Tail L Length 156 Tail Length -185 Tail Length 125 Tail Length 158 Tail Length -185 Tail Length Positions .030 Contact 030 Contact 030 Contact .040 Contact 040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEM-9PET! _ DEM-9PMTI DEM-9PZTI DEM-9PBTI = DEM-9PHTI _ DEM-9PXTI 15 _DAM-15PETI DAM-ISPMTI = DAM-15PZTI = DAM-15PBTI DAM-15PHT! DAM-15PXTI 25 DBM-25PET| = DBM-25PMT! _ _DBM-25PZTI _ DBM-25PBTI -DBM-25PHTI DBM-25PXTI / 37 DCM-37PETI DCM- -S7PMTE DCM-37PZT To DCM- -37PBTI _DCM-37PHTI = DCM-37PXTI 50 DDM-5SOPETI DDM- 5OPMTI DDM- SOPZTI DDM-50PBT! DDM-50PHT| = DDM-50PXTI Tin-Piated Shell with Grounding Indents and 4-40 Clinch Nuts -125TailLength .158TailLength .185TailLength .125TailLength .158Tail Length .185 Tail Length Positions .030 Contact .030 Contact .030 Contact -040 Contact .040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 _ DEME-9PET! DEME-9PMTI DEME-9PZTi =DEME-SPBTi =DEME-SPHT! DEME-9PXT! 15 DAME- I5PETI 7 DAME-1 -15PMTI. DAME- -15P2T! DAME- 45PBTI _ DAME-15PHTI DAME- -1S5PXTI 25 DBME-25PETI DBME-25PMTI DBME-25P2TI DBME-25PBTI DBME-25PHT| = DBME-25PXT! 37 DCME-37PET| = DCME-37PMTI DCME-37PZTI DCME-37PBTI = DCME-37PHT| =DCME-37PXTI 50 DDME-SOPETI DDME-50PMTI DDME-50PZTi DOME-SOPBTI DDME-SOPHTI = DDME-50PXTI Tin-Plated Sheil with Grounding Indents and Dual Float Bushings -125 Tail Length -158 Tall Length 185 Tail Length -125 Tail Length -158 Tail Length 185 Tail Length Positions 030 Contact .030 Contact 030 Contact .040 Contact 040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEMY-9PET| | DEMY-9PMTI _DEMY-9PZT| DEMY-9PBT! DEMY-9PHT! _ DEMY-9PXTI_ 15 (DAMY-15PET| DAMY-15PMTI. = DAMY-15PZTI = DAMY-15PBT| = DAMY-1SPHT|. = DAMY-15PXTI 25 DBMY-25PET| DBMY-25PMT| = DBMY-25PZTi_ DBMY-25PBT|_ = DBMY-25PHT! = DBMY-25PXTI__ 37 DCMY-37PET| | DCMY-37PMTI DCMY-37PZTI_ = DCMY-37PBT|_ = DCMY-37PHT|_ = DCMY-37PXTI 50 DDMY-SOPET| = DDMY-SOPMTI = DDMY-S0PZT!_ = DDMY-S0PBT|_ = DDMY-S0PHTI. = DDMY-50PXTI Vertical PCB Sockets Zinc-Plated Shell with Yellow Chromate Finish 125 Tail Length .158Tail Length 165 Tail Length .125TallLength .158Tail Length .185 Tail Length Positions .030 Contact 030 Contact .030 Contact -040 Contact 040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEM-9SE DEM-9SM _DEM-98Z _ DEM-9SB _DEM-9SH _DEM-9SX_ 15 DAM-15SE_ ~ _DAM-15SM DAM-15SZ _DAM-15SB DAM-15SH _ DAM-15SX __ 25 _DBM-25SE DBM-25SM DBM-25SZ DBM-25SB_ ss: DBM-25SH DBM-258X 37 __DCM-37SE DCM-37SM DCM-378Z DCM-37SB_ ~DCM-37SH_:DCM-37SX_ 50 DDM-50SE __DDM-50SM DDM-50SZ DDM-50SB DDM-50SH DDM-50SX 10/1998 4-53 Call Toll Free: 1 (800) 323-9612D-subminiature Metal Shell Vertical Dip Solder PCB Series 1 - High Reliability Cinch Ordering Information Vertical PCB Sockets (Cont'd) Zinc-Plated Shell with Yellow Chromate Finish and | 4-40 Clinch Nuts 125 Tall Length .158TaliLength .165 Tall Length 125 TallLength .158 Tall Length _.165 Tall Length Positions .030 Contact 030 Contact .030 Contact -040 Contact .040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEME-9SE DEME-9SM DEME-9SZ = DEME-9SB DEME-9SH _ DEME-9SX _ 15 DAME-15SE = DAME-15SM DAME-15SZ_ -- DAME-15SB DAME-15SH DAME-15SX__ 25 ssDBME-25SE _ DBME-25SM DBME-25SZ_ DBME-25SB DBME-25SH DBME-25SX _ 37 DOME-37SE___ DCME-37SM DCME-37SZ_ _ DCME-37SB_DCME-37SH___ DCME-37SX _ 50 ____DDME-SOSE _DDME-S0SM _-DDME-50SZ____: DDME-50SB _DDME-SOSH _DDME-50SX Zinc-Plated Sheil with Yellow Chromate Finish and Dual Float Bushings _ _ __ 125TaitLength = .158TallLength .165TaliLength .125Tail Length .158Tall Length .185 Tail Length Positions .030 Contact .030 Contact 030 Contact 040 Contact 040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 __*DEMY-9SE _DEMY-9SM DEMY-98Z sd DEMY-9SB _DEMY-9SH __DEMY-9SX _ 15 = -DAMY15SE_s_ DAMY-15SM DAMY-15SZ_ -DAMY-15SB_sDAMY-15SH_ = DAMY-15SX __ 25 *DBMY-25SE_sDBMY-25SM _DBMY-25SZ _s DBMY-25SB DBMY-25SH = DBMY-25SX __ 37 DCMY-37SE = DCMY-37SM DCMY-378Z = DCMY-37SB DCMY-37SH = DCMY-37SX__ 50 DDMY-SOSE _DDMY-SOSM DDMY-S0SZ_ __- DDMY-50SB _DDMY-50SH DDMY-S0SX Tin-Plated Shelli _ 125 Tail Length .158TailLength .185Tall Length .125TailLength .158Tail Length .185 Tail Length Positions -030 Contact -030 Contact -030 Contact -040 Contact -040 Contact .040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEM-9SET DEM-9SMT _DEM-98ZT = -DEM9SBT s DEM-9SHT _ DEM-9SXT _ 18 DAM45SET DAM-1SSMT_DAM-15SZT_DAM-15SBT__ DAM-15SHT DAM-15SXT 25 DBM-25SET DBM-25SMT_ -- DBM-25SZT_=ssDBM-25SBT = DBM-25SHT_ = DBM-25SXT__ 37 DCM-37SET = _sDCM-37SMT_sDCM-37SZT_ = ~DCM-37SBT = DCM-37SHT =: DCM-37SXT__ 50 DDM-SOSET == = DDM-SOSMT_ (DDM-S0SZT_ DDM-SOSBT = DDM-SOSHT =: DDM-S0SXT Tin-Plated Sheli with 4-40 Clinch Nuts 125 Tail Length .158 Tail Length .165TailLength .125TailLength .158TailLength .185 Tail Length Positions .030 Contact 030 Contact 030 Contact 040 Contact -040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEME-9SET DEME-9SMT DEME-9SZT DEME-9SBT = DEME-9SHT = DEME-9SXT _ 15 DAME-15SET DAME-15SMT _DAME-15SZT = DAME-15SBT = _DAME-15SHT = DAME-15SXT 25 DBME-25SET _DBME-25SMT -DBME-25SZT_ _-DBME-25SBT -DBME-25SHT _ DBME-25SXT 87. _DCME-37SET = -DCME-37SMT_ =~ DCME-37SZT =~ DCME-37SBT = DCME-37SHT += DCME-37SXT_ 60 DDME-S0SET _ DDME-S0SMT __ DDME-50SZT _DDME-50SBT ___DDME-S0SHT___ DDME-50SXT Tin-Plated Shell with Dual Float Bushings _ _ -125 Tall Length .158TailLength .185TallLength .125TailLength .158TailLength .185 Tail Length Positions .030 Contact .030 Contact .030 Contact -040 Contact 040 Contact -040 Contact Diameter Diameter Diameter Diameter Diameter Diameter 9 DEMY-9SET DEMY-9SMT DEMY-9SZT -DEMY-9SBT = -DEMY-9SHT_ = DEMY-9SXT_ 15 ~ ~DAMY45SET = -DAMY-15SMT_s;DAMY-15SZT_s- DAMY-15SBT = DAMY-15SHT_=_ DAMY-15SXT. (25 -sdDBMY-25SET -DBMY-25SMT_ s- DBMY-25SZT_ DBMY-25SBT = DBMY-25SHT__ DBMY-25SXT_ 87. ~-s*dDCMY-37SET_~s- DCMY-37SMT_ DCM __DCMY-37SBT _ _DCMY-37SHT DCMY-37SXT 50 DDMY-S0SET__DDMY-S0SMT_ __DDMY-50SBT___ DDMY-50SHT__ DDMY-50SXT Call Toll Free: 1 (800) 323-9612 4-54 10/1998D-subminiature Metal Shell - Combination Layout Solder Cup and Vertical PCB Cinch Series 1 - High Reliability Shell Sizes (equivalent to standard size): & (Size 9), A (Size 15 ), B (Size 25 ), C (Size 25 ), and D (Size 25 ). * Offered in a variety of combination layouts in vertical style for PCB mount or solder cup style for wire termination. * Signal Contacts (Size 20) are fixed and non-removabie. - Vertical Dip Solder Contacts are available with three contact taif lengths (.125", .158", and .185") and two contact diameters (.030" and .040"). Removable Coaxial, High Power, High Voltage contacts must be ordered separately. * See Series 1 page 4-48 for specifications. * Available with 3Ouin. or SOpin. gold contact plating. Materials Connector Shell: * Steel with zinc or cadmium plating and yellow chromate finish or tin plating (grounding indents on plug). 10/1998 4-55 Call Toll Free: 1 (800) 323-9612D-subminiature Metal Shell - Combination Layout I Series 1 - High Reliability ki Cinch Combination Layouts Go) C30) GE) Gay Sheil Size E A A Contact Arrangement 5W1 3W3 7We2 11W1 Signal Contacts 4 0 5 10 Coax Cavities 1 1 4 1 AL az a3 OO Ty 86. Or Od Or @ 8 8. ~ ~ eo O: Nema a) CO 8 "33, oS oe e* e* e* e* Or Send a ") $e. : e. 4@ bad 33: Na Shell Size B B B B Contact Arrangement ow4 13W3 17W2 21W1 Signal Contacts 5 10 15 20 Coax Cavities 4 3 2 1 at a2 ad Ma as As + 364 aS Ad AB _ Me OOO OOO | (Q0000000 OG Shell Size c c Contact Arrangement 13W6 awa 17W5 Signal Contacts 7 0 12 Coax Cavities 8 5 Shell Size Cc Cc c Contact Arrangement 21WA-4 25W3 27We2 Signal Contacts 17 22 25 Coax Cavities 4 3 2 Sheil Size D D D Contact Arrangement 24W7 36W4 43W2 Signal Contacts 25 32 4 Coax Cavities 2 4 2 NOTE: Mating face of plug is shown, socket is mirror image. Position numbers are for male only. Call Toll Free: 1 (800) 323-9612 4-56 10/1998D-subminiature Metal Shell - Combination Layout Solder Cup Series 1 - High Reliability Cinch Will accommodate up to 20 AWG wire. 390 (9.91) _ 4 Combo D-sub Solder Cup Plugs 30pin. Gold Plating Ordering Information .200 (5.08) REF. Shell Zinc-Plated Shell with Yellow Chromate Finish Tin-Plated Shell with Grounding Indents Size_ Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 440 Clinch Nuts Dual Float Bushings E _ DEM-XXWX*P DEME XXWX*P DEMY-XXWX*P DEM-XXWX"PTI =. DEME-XXWXPTI DEMY-XXWX*PTI A __DAME-XXWX*P DAMY-XXWX*P __ _DAM-XXWX*PTI DAME-XXWX'PTI DAMY-XXWX*PTI B DBME-XXWX*P = DBMY-XXWX"P DBM- -XXWX*PTI DBME-XXWX*PT! DBMY-: -XXWX*PTI DCM-XXWX*P DCME-XXWX*P DCMY-XXWX*P __DCM-XXWXPTI -DCME- -XXWX?PTI _ DCMY-XXWX*PT| DB _DDM-XXWX"P _DDME-XXWX"P__ DDMY-XXWX"P (DDM-XXWX"PTI__DDME-XXWX"PTI___ DDMY-XXWXPTI Combo D-sub Solder Cup Sockets 30pin. Gold Plating Shell Zine-Plated Shell with Yellow Chromate Finish Tin-Ptated Shell Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 4-40 Clinch Nuts Dual Float Bushings E DEM-XXWX*S DEME-XXWX*S _DEMY-XXWXS _ _DEM-XXWX*ST = -DEME-XXWX*ST = DEMY-XXWXST. A DAM-XXWX*S = -DAME-XXWX*S = DAMY-XXWX*S s;DAAM-- XXWX*ST DAME-XXWX*ST DAMY-XXWX*ST _B _DBM-XXWx*S _sDBME- XXWX*S __DBMY-XXWX*S ss DBM-XXWX*ST DBME-XXWX*ST DBMY-XXWX*ST Cc DCM-XXWX*S = DCOME-XXWX*S = DCMY-XXWX*S) sDCM-- -XXWX*ST __ DCME-XXWX*ST ss DCMY- XXWX*ST D DDM- XXWX*S _DDME-XXWX*S DDMY- XXWX'S ; _DDM- XXWX"ST _ DDME-XXWX*ST = DDMY-XXWX*ST Combo D-sub Soider Cup Plugs and Sockets 50pin. Gold Plating Cadmium-Plated Shell with Yellow Chromate Finish Shell Plugs Sockets Size Mounting Holes 4-40 Clinch Nuts Dual Float Bushings Mounting Holes 4-40 Clinch Nuts Dual Float Bushings E DEMM-XXWX*P _ DEMME-XXWX"P DEMMY- XXWX*P _ _DEMM-XXWxX*S DEMME-XXWX*S DEMMY-XXWX*S A DAMM-XXWX*P_ DAMME-XXWX*P _DAMMY-XXWX"P (DAMM-XXWX*S DAMME-XXWX*S = DAMMY-XXWX"S B DBMM-XXWX*P_ DBMME- XXWX"P DBMMY-XXWX*P _DBMM-XXWX"S = DBMME-XXWX*S DB MY- XXWX"*S, -C DCMM-XXWX*P__ DCMME- XXWX'P __DCMMY- XXWX*P _ _DCOMM-XXWX*S -_ DCMME-XXWX*S DCMMY- XXWX*S D _DDMM-XXxWXx"P__DDMME-XXWX*P_ DDMMY-XXWX"P__ DDMM-XXWX"S__ DDMME-XXWX*S DDMMY-XXWX"S *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 10/1998 4-57 Call Toll Free: 1 (800) 323-9612D-subminiature Metal Shell - Combination Layout Vertical PCB Dip Solder Tails Series 1 - High Reliability SEE CHART Ft i Lt _> SEE CHART | .200 REF. | Ordering Information Combo D-sub Vertical PCB Plugs 30pin. Gold Plating Zinc-Plated Sheil with Yellow Chromate Finish and Mounting Holes _ 125 Tail Length .158Tail Length .185 Tail Length .125 Tail Length .158 Tail Length .185 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact -040 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter Diameter Diameter E ssdDEM-XXWX*PE _ DEM-XXWX*PM DEN KAWK'PZ. __DEM-XXWX*PB DEM-XXWX*PH = DEM-XXWXPX A DAMXXWX*PE DAM-XXWX"PM DAM-XXWX" __DAM-XXWX*PB DAM-XXWX*"PH DAM B ._DBM-XXWX"PE | _DBM-XXWX"PB __DBM-XXWX*PX CG _DCM-XXWX*PE _.D DCM-XXWX"PB _.. DOM-XXWX"PX_ DBD __DDM-XXWX*PE sDDM -XXWX"PM DDM-XXWX*PB = DDM-XXWX*PH = DDM-XXWX*PX Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Cl Clinch Nuts 125 Tail Length .158Tail Length .185 Tail Length .125 Tall Length .158 Tall Length .165 Tail Length .030 Contact .030 Contact .030 Contact .040 Contact -040 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter Diameter Diameter _E ___ DEME-XXWX*PE = DEME-XXWX"PM_ = DEME-XXWX*PZ = DEME-XXWX*PB DEME-XXWX*PH DEME-XXWX*PX AL _ DAME-XXWX*PE DAME-XXWX"PM DAME: X*PZ DAME-XXWX*PB_DAME-XXWX*PH DAME-XXWX*PX Bo DBME-XXWX*PE DBME-XXWX*PM_ DBME-XXWX*PZ_ = DBME-XXWX*PB_ DBME-XXWX*PH DBME-XXWX*PX Cc DCME-XXWX*PE ~ DCOME-XXWX*PM = _DCME-XXWX*PZ = DCME-XXWX*PB DCME-XXWX*PH_ = DCME-XXWX*PX _D_ DDME-XXWX*PE DDME-XXWX*PM_ DDME-XXWX*PZ_ DDME-XXWX*PB_ DDME-XXWX"PH _ DDME-XXWXPX Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings 125 Tail Length .158 Tail Length .185 Tail Length .125 Tail Length .158 Tall Length .1685 Tail Length .030 Contact -030 Contact -030 Contact .040 Contact -040 Contact .040 Contact Shell Size Diameter Diameter Diameter Diameter Diameter Diameter CE _DEMY-XXWX"PE _DEMY-XXWX"PM_DEMY-XXWX"PZ _DEMY-XXWX"PB___ DEMY-XXWXPH _ DEMY-XXWX"PX A : _ DAMY-XXWX*PM- Y. _ _DAMY-XXWX*PB - DAMY-XXWX*PH DAMY-XXWX*PX __ B DBMY-XXWX*PE DBMY-XXWX*PM DBMY-XXWXPZ_ DBMY-XXWX*PB__DBMY-XXWX*PH DBMY-XXWX*PX __ Cc) DCMY-XXWX*PE DCMY-XXWX*PM DCMY-XXWX*PZ DCMY-XXWX*PB -DCMY-XXWX*PH DCMY-XXWX*PX Db DDMY-XXWX*PE DDMY-XXWX*PM. DDMY-XXWX*PZ DDMY-XXWX*PB _ DDMY-XXWX*PH_ _ DDMY-XXWX*PX__ Tin-Plated Shell with Grounding Indents and Mounting Holes _ 125 Tall Length .158Tall Length _.185 Tail Length .1257Tail Length .158Tail Length .185 Tail Length .030 Contact .030 Contact 030 Contact -640 Contact .040 Contact -040 Contact Shell Size Diameter Diameter Diameter Diameter Diameter Diameter E DEM-XXWX*PET! DEM-XXWX*PMTI DEM-XXWX*PZTI DEM-XXWX*PBTI DEM-XXWX*PHTI = DEM-XXWXPXTI A _DAM-XXWX*PETI DAM-XXWX*PMTI DAM-XXWX*PZTI DAM-XXWX"PBTI DAM-XXWX*PHTI DAM-XXWX*PXTI i: DBM-XXWX*PET! DBM-XXWX*PMTI DBM-XXWX*PZTI DBM-XXWX*PBT!__D. HTl = DBM-XXWX*PXT! ~C _ DCM-XXWX*PETI_ DCM-XXWX*PMTI_ DCM-XXWX*PZTI_ DCM-XXWX*PBTI DCM-XXWX*PHT] DCM-XXWX*PXTI oO ~ DDM-XXWX*PETI = DDM-XXWX*PMTI DDM-XXWX*PZTI DDM-XXWX*PBTI DDM-XXWX*PHTI = DDM-XXWX*PXTI * Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. Call Toll Free: 1 (800) 323-9612 4-58 40/1998D-subminiature Metal Shell - Combination Layout Vertical PCB Dip Solder Tails Series 1 - High Reliability Ek: Cinch Ordering Information Combo D-sub Vertical PCB Plugs 30pin. Gold Plating (Contd) Tin-Plated Shell with Grounding Indents and 4-40 Clinc Clinch Nuts 125 Tail Length .158TailLength .185 Tail Length _.125 Tail Length -158 Tall Length _.185 Tail Length Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact -040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter _E _DEME-XXWX*PET] DEME-XXWX*PMTL DEME-XXWX*PZTI DEME-XXWXPBTI DEME-XXWX*PHT| DEME-XXWX*PXTI A _DAME-XXWX"PETI DAME-XXWX*PMTI DAME-XXWXPZTI_DAME-XXWXPBTI_ DAME-XXWX*PHTI _DAME-XXWX*PXTI _B_DBME-XXWXPETI DBME-XXWX*PMTI_ _ DBME-XXWX"*PZTI_ DBME-XXWX*PBTI DBME-XXWX*PHTI _DBME-XXWX*PXTI C _DCME-XXWX*PETI DCME-XXWX*PMTI DCME-XXWX*PZTI|_ DCME-XXWXPBTI DCME-XXWX*PHTI_DCME-XXWX*PXTI _D_ _DDME-XXWX*PETI = DDME-XXWX*PMTI_ DDME-XXWX*PZTI_ DDME-XXWX*PBTI DDME-XXWX*PHTI DDME-XXWX"PXTI Tin-Plated Shell with Groundin indents and Dual Float Bushings 125 Tail Length .158TailLength .185TailLength .125 Tail Length -158 Tail Length _.185 Tail Length Shell .030 Contact .030 Contact -030 Contact -040 Contact -040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E _DEMY-XXWXPETI DEMY-XXWX*PMTI DEMY-XXWX*PZTI DEMY-XXWX"*PBTI DEMY-XXWX*PHTI DEMY-XXWX*PXTI _A____DAMY-XXWX*PETI DAMY-XXWX*PMTI DAMY-XXWX*PZTI DAMY-XXWX*PBTI DAMY-XXWX*PHTI DAMY-XXWX*PXTI _B _DBMY-XXWX*PET] DBMY-XXWX*PMTI_ DBMY-XXWX*PZTI DBMY-XXWX*PBT] DBMY-XXWX*PHTI DBMY-XXWX*PXT! DCMY-XXWX*PETI DCMY-XXWX*PMTI DCMY-XXWX*PZTI DCMY-XXWX*PBT] DCMY-XXWX*PHTI _ DCMY-XXWX*PXTI _D_DDMY-XXWX*PETL DDMY-XXWX*PMTI DDMY-XXWX*PZTI_ DDMY-XXWX*PBT] DDMY-XXWX*PHTI DDMY-XXWX*PXTI 50yin. Gold Plating Cadmium-Plated Sheli with Yellow Chromate Finish and Mounting Holes 125 Tall Length .158TallLength _.185 Tail Length a il Length -158 Tail Length _.185 Tail Length Shell -030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEMM-XXWXPE = DEMM-XXWX*PM DEMM-XXWX"PZ DEMM-XXWX*PB) DEMM-XXWX*PH = DEMM-XXWX*PX. DAMM-XXWX"PE _DAMM-XXWX*PM == DAMM-XXWX*PZ = DAMM-XXWX*PB_ = DAMM-XXWX*PH = DAMM-XXWX"PX DBMM-XXWXPE __ ~ OCMM-XXWXPE ~ DDMM-XXWXPE- DO D> ~DBMM-XXWX"PM DBMM-XXWX*PZ DBMM-XXWxX*PB DCMM-XXWX*PM - DCMM-XXWX"*PZ ~DDMM-XXWX?PM __ DDOMM-XXWX*PZ DCMNM-XXWX*PB DBMM-XXWX*PH DCMM-XXWX*PH ~ DBMM-XXWX"PX DCMM-XXWi'PX DDMM-XXWX*PB Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts __DDMM-XXWX*PH ~ DDMM-XXWX*PX -125 Tail Length -158 Tall Length "185 Tall Length 125 Tail Length -158 Tail Length -185 Tail Length Shell .030 Contact .030 Contact ,030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEMME-XXWX*PE DEMME-XXWX*PM DEMME-XXWX*PZ = DEMME-XXWX*PB = DEMME-XXWX*PH | DEMME-XXWX'*PX A DAMME-XXWX*PE DAMME-XXWX"PM = _DAMME-XXWX*PZ OAMME-XXWX*PB_ = DAMME-XXWX*PH | DAMME-XXWX*PX B DBMME-XXWX*PE = DBMME-XXWX*PM DBMME-XXWX*PZ = DBMME-XXWX*PB_ = DBMME-XXWX*PH_ _ DBMME-XXWX*PX C _DCMME-XXWX*PE ~ DGMME-XXWX*PM DCMME-XXWxCPZ _ DOMME-XXWX*PB OCMME-XXWX*PH DCMME-XXWX?PX D _DDMME-XXWX*PE DDMME-XXWX*PM. DDMME-XXWX?PZ DDMME-XXWX*PB Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings .125 Tail Length -156 Tail Length "185 Tail Length 125 Tail Length _DDMME-XXWX*PH -158 Tail Length DDMME-XXWXx"PX -185 Tail Length Shell .030 Contact .030 Contact .030 Contact -040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEMMY-XXWX*PE __ DEMMYX -XXWXPM DEMMY-XXWX*PZ = DEMMY-XXWX*PB DEMMY-XXWX*PH DEMMY-XXWX*PX A DAMMY-XXWX*PE ~DAMMY-XXWXPZ DAMMY-XXWX*PB_ DAMMY-XXWX"PH DAMMY-XXWX*PX B , DBMMY-XXWXPZ = DBMMY-XXWX*PB DBMMY-XXWX*PH DBMMY-XXWX*PX _ Cc . aE EN DCMMY-XXWX*PZ DCMMY-XXWX*PB_ DCMMY-XXWX*PH_ = DCMMY-XXWX*PX D. ~ DDMMY-XXWX*PM DDMMY-XXWX*PZ = DDMMY-XXWX"PB _ DDMMY-XXWX*PH__ DDMMY-XXWX*PX *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 10/1998 4-59 Cail Toll Free: 1 (800) 323-9612D-subminiature Metal Shell - Combination Layout Vertical PCB Mount Dip Solder Tails yy, Gad Cinch Series 1 High Reliability Ordering Information Combo D-sub Vertical PCB Sockets 30uin. Gold Plating Zinc-Plated Shell with Yellow Chromate Finish and Mounting Holes Shell .125 Tail Length .030 Contact .158 Tail Length .030 Contact -185 Tail Length .030 Contact .125 Tail Length -158 Tail Length -185 Tail Length .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter _E DEM-XXWX*SE DEM-XXWXSM ss; DEM-XXWX*SZ DEM-XXWX'SB_ ss DEM-XXWX*SH = DEM-XXWX*SX A _DAN-XXWX*SE _ DAM-XXWX*SM - DAM-XXWX*?SZ__s DAM-XXWX*SB) ss DAM-XXWX*SH = DAM-XXWX"SX __ -B DBM-XXWX*SE _ DBM-XXWX*SM DBM-XXWX*SZ = DBM-XXWX*SB_ ss DBM-XXWX*SH_ DBM-XXWX*SX _ C -DCM-XXWX*SE = DCM-XXWX"SM_ DCM-XXWX*SZ DCM-XXWX*SB = DCM-XXWX*SH DCM-XXWXSX _D DDM-XXWX*SE DDM-XXWX*SM = DDM-XXWX*SZ_ ss DDM-XXWX*SB_) ss DDM-XXWX*SH Zinc-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts ~ DDM-XXWX*SX Shell 125 Tail Length .030 Contact -158 Tail Length .185 Tail Length -125 Tail Length -158 Tall Length -185 Tail Length .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E __DEME-XXWX*SE - DEME-XXWX*SM = DEME-XXWX*SZ s DEME-XXWX*SB ss DEME-XXWX*SH _ DEME-XXWX*SX A___DAME-XXWX*SE - DAME-XXWX*SM_ DAME-XXWX*SZ_ = DAME-XXWX"SB DAME-XXWX*SH DAME-XXWX*SX B DBME-XXWXSE _ DBME-XXWX*SM DBME-XXWX*SZ_ - DBME-XXWX*SB_ -_- DBME-XXWX*SH _ DBME-XXWX*SX GC DCME-XXWX*SE = DCME-XXWX"SM = DCME-XXWX*SZ = DCME-XXWX*SB_ = DCME-XXWX*SH = DCME-XXWX*SX D DDME-XXWX*SE = DDME-XXWX"SM DDME-XXWX"SZ _ DDME-XXWX*SB_ = DDME-XXWX*SH Zinc-Plated Shell with Yellow Chromate Finish and Dual Float Bushings DDME-XXWX*SX 125 Tall Length -158 Tail Length -185 Tali Length .125 Tail Length -158 Tail Length -185 Tail Length Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter _E _DEMY-XXWXSE DEMY-XXWX*SM = DEMY-XXWX*SZ_ - DEMY-XXWX*SB ss DEMY-XXWX*SH _ DEMY-XXWX*SX A DAMY-XXWX*SE - DAMY-XXWX*SM_ = DAMY-XXWXSZ DAMY-XXWX*SB_ ss DAMY-XXWXSH_ _ DAMY-XXWX"SX _B _DBMY-XXWX*SE s DBMY-XXWX"SM_ - DBMY-XXWX*SZ_ _ DBMY-XXWX"SB DBMY-XXWX*SH _ DBMY-XXWX*SX C _-DCMY-XXWX*SE -s DCMY-XXWX*SM DCMY-XXWX"SZ DCMY-XXWX"SB_ _ DCMY-XXWX*SH _ DCMY-XXWX"SX D - DDMY-XXWX*SE -s DDMY-XXWX*SM s- DDMY-XXWX"*SZ_ DDMY-XXWX*SB__ DDMY-XXWX*SH DDMY-XXWX*SX Tin-Plated Shell with Mounting Holes -125 Tail Length -158 Tail Length 185 Tail Length .125 Tail Length -158 Tail Length -185 Tail Length Shell .030 Contact .030 Contact .030 Contact .046 Contact -040 Cantact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEM-XXWX'SET | DEM-XXWX*SMT -sd DEM-XXWX"SZT -DEM-XXWX*SBT = DEM-XXWX"SHT__s DEM-XXWX*SXT A DAM-XXWX*SET _s DAM-XXWX*SMT DAM-XXWX*SZT _DAM-XXWX*SBT = _DAM-XXWX*SHT DAM-XXWX*SXT B DBM-XXWX*SET | DBM-XXWXSMT DBM-XXWX*SZT -DBM-XXWX*SBT_ - DBM-XXWX*SHT - DBM-XXWX*SXT C _ DOM-XXWX*SET _DCM-XXWX*SMT = DCM-XXWX*SZT - DCM-XXWX"SBT = DCM-XXWX*SHT = DCM-XXWX*SXT i) DDM-XXWX*SET DDM-XXWX*SMT -DDM-XXWX*SZT - DDM-XXWX*SBT - DDM-XXWX*SHT = DDM-XXWX*SXT * Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. Cail Toll Free: 1 (800) 323-9612 4-60 10/1998D-subminiature Metal Shell - Combination Layout Vertical PCB Mount Dip Solder Tails Series 1 - High Reliability Ek Cinch Ordering Information Combo D-sub Vertical PCB Sockets (Cont'd) 30pin. Gold Plating (Contd) Tin-Plated Shell with 4-40 Clinch Nuts 125 Tail Length -158 Tail Length .185 Tail Length = .125 Tail Length 158 Tail Length = .185 Tail Length Shell .030 Contact .030 Contact 030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter _E _DEME-XXWX*SET DEME-XXWX*SMT_ _ DEME-XXWX*SZT DEME-XXWX*SBT DEME-XXWXSHT _ DEME-XXWXSXT _ A DAME-XXWX"SET DAME-XXWX*SMT DAME-XXWX*SZT_ DAME-XXWXSBT DAME-XXWX*SHT | DAME-XXWX*SXT _B _DBME-XXWXSET DBME-XXWX*SMT DBME-XXWX*SZT DBME-XXWX*SBT DBME-XXWX*SHT DBME-XXWX*SXT_ C _ DCME-XXWX*SET = DCME-XXWX*SMT_ DCME-XXWX*SZT_ DCME-XXWX*SBT DCME-XXWX"SHT DCME-XXWX*SXT D DDME-XXWX*SET = DDME-XXWX*SMT = DDME-XXWX*SZT DDME-XXWX*SBT = DDME-XXWX*SHT DDME-XXWX*SXT Tin-Plated Shell and Dual Float Bushings -125 Tail Length -158 Tail Length 185 Tail Length = .125 Tail Length 158 Tail Length = .185 Tail Length Shell 030 Contact .030: Contact .030 Contact .040 Contact -040 Contact .040 Contact Size Diameter Diameter Diameter Diameter __ Diameter Diameter _E _DEMY-XXWX*SET = DEMY-XXWX"SMT DEMY-XXWX*SZT DEMY-XXWX*SBT DEMY-XXWX*SHT DEMY-XXWX"SXT A ___DAMY-XXWX*SET DAMY-XXWX*SMT DAMY-XXWX*SZT_ _ DAMY-XXWX*SBT _DAMY-XXWX*SHT DAMY-XXWX*SXT B DBMY-XXWX*SET DBMY-XXWX*SMT DBMY-XXWX*SZT _ DBMY-XXWX*SBT _ DBMY-XXWX*SHT | DBMY-XXWX*SXT _ C _DCMY-XXWX*SET DCMY-XXWX*SMT_ - DCMY-XXWX*SZT_ _ DCMY-XXWX*SBT _DCMY-XXWX'SHT DCMY-XXWX*SXT D DDMY- XXWX*SET ; DDMY- XXWX*SMT DDMY- XXWX*SZT DDMY-XXWX*SBT DDMY-XXWX*SHT -DDMY- XXWX*SXT 50pin. Gold Plating Cadmium-Plated Shell with Yellow Chromate Finish and Mounting Holes 125 Tail Length .158 Tail Length -185 Tail Length = _.125 Tail Length .158 Tail Length 185 Tail Length Sheli .030 Contact .030 Contact .030 Contact .040 Contact -040 Contact -040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter -E DEMM-XXWX*SE = _DEMM-XXWX*SM = DEMM-XXWX*SZ_s DEMM-XXWX*SB_ DEMM-XXWX*SH_ _ DEMM-XXWX*SX _A DAMM-XXWX*SM DAMM-XXWX*SZ DAMM-XXWX"SB = DAMM-XXWX"SH DAMM-XXWX*SX BL DBMM-XXWX*SM = DBMM-XXWX*SZ = DBMM-XXWX*PB_ = DBMM-XXWX*SH DBMM-XXWX*SX__ CC DCMM-XXWX*SE_ DCMM-XXWX"SM_ = DCMM-XXWX*SZ__ DCMM-XXWX*SB__ DCMM-XXWX*SH __ DCMM-XXWX*SX D DDMM-XXWX*SE = DDMM-XXWX*SM DDMM-XXWX*SZ = DDMM-XXWX*SB_ = DDMM-XXWX*SH = DDMM-XXWX*SX_ Cadmium-Plated Shell with Yellow Chromate Finish and 4-40 Clinch Nuts -125 Tail Length -158 Tail Length -185 Tail Length .125 Tail Length -158 Tail Length 185 Tail Length Shell .030 Contact .030 Contact .030 Contact .040 Contact .040 Contact -040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEMME-XXWX*SE DEMME-XXWX"SM = DEMME-XXWXSZ_ DEMME-XXWXSB_ = DEMME-XXWXSH DEMME-XXWX*SX A DAMME-XXWX*SE DAMME-XXWX*SM_ DAMME-XXWX*SZ DAMME-XXWX*SB_ DAMME-XXWX"*SH DAMME-XXWX*SX _ B._DBMME-XXWX*SE DBMME-XXWX*SM_ DBMME-XXWXSZ_ DBMME-XXWX*SB_ DBMME-XXWXSH | DBMME-XXWX*SX C _DCMME-XXWX*SE DCMME-XXWX*SM_ OCMME-XXWXSZ_ DCMME-XXWX*SB_ DCMME-XXWX*SH DCMME-XXWX"SX D DDMME-XXWX*SE___ DDMME-XXWX"SM __ DDMME-XXWX"SZ_ DDMME-XXWX"SB__ DDMME-XXWX*SH _ DDMME-XXWX*SX Cadmium-Plated Shell with Yellow Chromate Finish and Dual Float Bushings 125 Tall Length 158 Tail Length -185 Tall Length _.125 Tail Length .158 Tail Length .185 Tail Length Shell .030 Contact .030 Contact -030 Contact .040 Contact .040 Contact .040 Contact Size Diameter Diameter Diameter Diameter Diameter Diameter E DEMMY-XXWX"SE | DEMMY-XXWX"SM DEMMY-XXWXSZ_ DEMMY-XXWXSB DEMMY-XXWX"SH_ DEMMY-XXWXSX A DAMMY-XXWX*SE _DAMMY-XXWX"SM DAMMY-XXWX*SZ DAMMY-XXWX*SB DAMMY-XXWX*SH __ DAMMY-XXWX*SX -B_ DBMMY-XXWX*SE DBMMY-XXWX*SM DBMMY-XXWXSZ = DBMMY-XXWX"SB DBMMY-XXWX"SH DBMMY-XXWX*SX c DCMMY-XXWX*SE DCMMY-XXWXSM_ DCMMY-XXWXSZ DCMMY-XXWXSB DCMMY-XXWX"SH DCMMY-XXWX*SX _ D _DDMMY-XXWX*SE DDMMY-XXWX*SM DDMMY-XXWX*SZ ODMMY-XXWXSB_ DDMMY-XXWX*SH DDMMY-XXWX*SX *Note: XXWX means insert combo layout contact arrangement from page 4-56 in catalog number i.e., 13W3. 10/1998 4-61 Call Toll Free: 1 (800) 323-9612