ZMS100 Series 2 x 4" 100W AC-DC Power Supplies Features 80W Convection, 100W with Forced Air ITE & Medical Certifications (2 x MOPP) Long Capacitor Lifetimes Class I and Class II operation Compact 2 x 4 x 1.25" Size Key Market Segments & Applications Specifications Model ZMS100 Input Voltage range 85 - 264VAC (47 - 63Hz). De-rate linearly to 90% load from 90V to 85VAC input Inrush Current (Cold start at 264VAC input) A <40A Input Current (Typical) A 1.0 / 2.0A (115 / 230VAC) Hold Up Time (Typ) ms 16ms at 230VAC input Harmonic Compliance EN/IEC61000-3-2 class A Leakage Current uA <100uA at 100VAC 60Hz input, <250uA at 230VAC 50Hz Touch Current (enclosure leakage) uA <100uA Temperature Coefficient 0.02%/C No Load Power Draw at 230VAC input W <0.5W Ripple & Noise mV (pk-pk) 2% Load Regulation mV 1% (0 - 100% load) Line Regulation mV 0.5% (85 - 264VAC) Short Circuit Protection Hiccup mode, automatic recovery Overvoltage Protection V Latching (unit shutdown), cycle AC input to reset Efficiency % Up to 89% Active Average Efficiency % >87% Operating Temperature C -20 to +70C, derate linearly to 50% load from 50 to 70C Storage Temperature C -40 to +85C Humidity (non condensing) %RH 5 - 95%RH Cooling Convection cooling 80W Forced air 100W (see technical datasheet on website) Withstand Voltage VAC Input to Ground 1.5kVAC (1xMOPP), Input to Output 4kVAC (2xMOPP), Output to Ground 1.5kVAC (1xMOPP) Isolation Resistance >100M at 25C & 70%RH, Output to Ground 500VDC Insulation Class Construction suitable for Class II installation Vibration (non operating) 10 to 500Hz at 2G, IEC610068-2-6, 19.6m/s2 constant sweep X, Y, Z for 1 hour Shock 30G EN610068-2-27, -47, MIL-STD-810E Safety Agency Certifications IEC/EN/UL60950-1 and 60601-1. ES60601-1. Designed to meet IEC61010-1, CQC safety standard GB4943.1-2011 Conducted & Radiated EMI EN55011 / EN55022-B conducted, -A radiated Immunity EN61000-4-2, -3, -4, -5, -6, -8 (Level 3 critieria A) -11 (class 3), -12 (level 3) Weight (Typ) g 150 Size (WxLxH) Inch (mm) 2 x 4 x 1.26" (50.8 x 101.6 x 31.9mm) Warranty yrs Three years Connectors Molex as standard with separate ground faston Input Molex 10-63-4027, output Molex 09-65-2048 1-800-526-2324 * www.us.tdk-lambda.com/lp/ 15 Disclaimer: us.tdk-lambda.com/lp/legal.htm ZMS100 Series Model Selector Model Single Output ZMS100-12 ZMS100-15 ZMS100-24 ZMS100-36 ZMS100-48 Output Voltage (V) Adjustment Range (V) Maximum Current (Convection) Maximum Current (Forced Air) Maximum Power (Convection) Maximum Power (Forced Air) 12 15 24 36 48 11.4 - 13.2V 14.25 - 16.5V 22.8 - 26.4V 32.4 - 39.6V 45.6 - 52.8V 6.7A 5.4A 3.4A 2.25A 1.67A 8.4A 6.7A 4.2A 2.8A 2.1A 80.4W 81.0W 81.6W 81.0W 80.2W 100.8W 100.5W 100.8W 100.8W 100.8W Outline Drawing ZMS100 12 - 15V Series Other TDK-Lambda AC-DC Products ZPSA20-60 NV175 ZWS KPSA ZPSA ZPD, ZPT 20 to 60W single output 175W, 3x5", 1-5 outputs 5 to 240W, single output 5 to 15W, pcb mount 40-60W, 2x4" single outputs 40W, 2x4" dual and triple outputs 1-800-526-2324 * www.us.tdk-lambda.com/lp/ ZMS100 24 - 48V Series For Additional Information, please visit us.tdk-lambda.com/lp/products/zms-series.htm 16 Revision p1.5: Nov 2014