52
TCM
Type
E
Case Size
See table
above
108
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
M=±20%
004
Rated DC Voltage
004=4Vdc
006=6Vdc
010=10Vdc
035=35Vdc
HOW TO ORDER
R
Packaging
R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 22 μF to 1000 μF
Capacitance Tolerance: ±20%
Leakage Current DCL: 0.1CV
Rated Voltage (VR)+85°C: 4 6.3 10 35
Category Voltage (VC)+105°C: 3.2 5 8 28
Surge Voltage (VS)+85°C: 5.2 8 13 46
Surge Voltage (VS) +105°C: 4 6 10 35
Temperature Range: -55ºC to +105ºC
Reliability:
1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance, 60% confidence level
TECHNICAL SPECIFICATIONS
TCM Series
Tantalum Solid Electrolytic Chip Capacitors
Conductive Polymer Multianode
CASE DIMENSIONS: millimeters (inches)
Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.
Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)
E2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)
W1dimension applies to the termination width for A dimensional area only.
0010
ESR in mΩ
For part marking see page 130
• Conductive polymer multianode
• Extremely Low ESR
• Reduced ignition failure mode
• 3x reflow 260°C compatible
• Volumetric efficiency
• High frequency capacitance retention
LEAD-FREE COMPATIBLE
COMPONENT
Elektra Award 2010
53
TCM Series
Tantalum Solid Electrolytic Chip Capacitors
Conductive Polymer Multianode
Capacitance Rated Voltage DC (VR) to 85°C
μF Code 4V (G) 6.3V (J) 10V (A) 35V (V)
22 226 E(25)
33 336
47 476
68 686
100 107
150 157
220 227
330 337 E(10)
470 477
680 687 E(12)*
1000 108 E(10,12)
1500 158
CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development – subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
RATINGS & PART NUMBER REFERENCE
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
ESR allowed to move up to 1.25 times catalog limit post mounting.
For typical weight and composition see page 123.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
Voltage vs Temperature Rating
100%
80%
100%
80%80%
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
-55°C 0°C 40°C 60°C 85°C 105°C
Rated range
Recommended derating
Rated DCL DF ESR
100kHz RMS Current (mA) 100kHz RMS Voltage (mV)
AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL
Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 105ºC 25ºC 85ºC 105ºC
4 Volt @ 85°C (3.2 Volt @ 105°C)
TCME108M004#0010 E 1000 4 400 8 10 3 5196 4677 3377 52 47 34
TCME108M004#0012 E 1000 4 400 8 12 3 4743 4269 3083 57 51 37
10 Volt @ 85°C (8 Volt @ 105°C)
TCME337M010#0010 E 330 10 330 8 10 3 5196 4677 3377 52 47 34
35 Volt @ 85°C (28 Volt @ 105°C)
TCME226M035#0025 E 22 35 77 8 25 3 3286 2958 2136 82 74 53
