Model BD0922J75100A00 Rev A Ultra Low Profile 0805 Balun 75 to 100 Balanced Description The BD0922J75100A00 is a broadband low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets and any application requiring an impedance transformation in an easy to use surface mount package. The BD0922J75100A00 is ideal for high volume manufacturing and is higher performance than traditional ceramic and lumped element baluns. The BD0922J75100A00 has an unbalanced port impedance of 75 and 100 balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD0922J75100A00 is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. ROOM (25C) Features: * * * * * * * * * * 900 - 2200 MHz 0.7mm Height Profile 75 Ohm to 2 x 50 Ohm Broadband applicability Covers all commercial communications bands in one part Low Insertion Loss Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling 900 Operating Temperature -55 Typ. 75 100 11.9 1.30 0.55 2.66 28.7 9.1 Max Unit 2200 1.64 0.80 4.67 24 2 MHz dB dB dB Degrees dB Watts +85 C * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing TOP VIEW (Near Side) SIDE VIEW BOTTOM VIEW (Far Side) 4x 0.37 2.040.10 0.700.05 1 3 2 2x 0.15 1.290.10 6x 0.98 Orientation Marker Denotes Pin Location Mechanical Outline -Dimensions are in Millimeters Orientation Marker Denotes Pin Location 6x 0.22 6 5 4 4x 0.65 6x 0.30 Pin Designation 1 Unbalanced Port 2 GND/DC Feed +RF GND 3 Balanced Port 4 Balanced Port 5 GND 6 NC Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD0922J75100A00 Rev. A Typical Performance: 800 MHz to 2.3 GHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 2000 2100 2200 2300 2200 2300 1700 1600 1500 1400 1300 1200 1100 1000 2300 2200 2100 2000 -20 1900 -2 1800 -15 1700 -10 1600 -1 -1.5 900 -5 800 0 -0.5 1500 2100 5 0 1400 1900 0.5 1300 2000 10 1200 1900 1 1100 1800 15 deg 2 1.5 1000 1700 Phase Balance 20 900 1800 Amplitude Balance 800 1600 Frequency [MHz] Frequency [MHz] [dB] 1500 800 2300 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 -3.6 1100 -36 900 -3.3 1000 -3 -33 1400 -2.7 -30 1300 -2.4 -27 1200 -2.1 -24 1100 -1.8 -21 900 -18 1000 [dB] 0 800 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 2300 2200 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100 900 1000 -36 800 [dB] -15 Frequency [MHz] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD0922J75100A00 Rev A Typical Broadband Performance: 500 MHz. to 8.5 GHz. Insertion Loss Frequency [MHz] 8000 8500 6500 7000 7500 5500 6000 4000 4500 5000 2500 3000 3500 500 1000 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 500 1000 1500 2000 0 -0.3 -0.6 -0.9 -1.2 -1.5 -1.8 -2.1 -2.4 -2.7 -3 -3.3 -3.6 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 F r eq uency [ M Hz ] Phase Balance Am plitude Balance 8500 7500 8000 6500 7000 5500 6000 4500 5000 4000 3000 3500 2000 2500 500 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000 8500 Fr e qu e nc y [ M H z ] 1000 1500 20 15 10 5 0 -5 -10 -15 -20 2 1.5 1 0.5 0 -0.5 -1 -1.5 -2 F r eq uency [ M Hz ] CMRR 7500 8000 8500 4500 5000 5500 6000 6500 7000 2000 2500 3000 3500 4000 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 -36 500 1000 1500 [dB] Return Loss - Input F r eq uency [ M Hz ] Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD0922J75100A00 Rev. A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from organic PTFE based composites which possess excellent electrical and mechanical stability. Xinger components are compliant to a variety of ROHS and Green standards and ready for Pb-free soldering processes. Pads are Gold plated with a Nickel barrier. An example of the PCB footprint used in the testing of these parts is shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint DC Bias Footprint Circuit Pattern Circuit Pattern Dimensions are in Millimeters Mounting Footprint Footprint Pad (s) Dimensions are in Millimeters Mounting Footprint Plated thru holes to ground Footprint Pad (s) Solder Resist Solder Resist 6x .41 0402 Capacitor 4x .25 6x .36 Plated thru holes to ground 3x Transmission lines 3x Transmission lines .04 .04 6x .33 6x .33 .66 .66 Plated thru holes to ground 4x .25 Visit us at www.Anaren.com Plated thru holes to USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282 Model BD0922J75100A00 Rev A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. 2.00 .81 4.00 1.75 3.50 8.00 1.60 4.00 2.41 .25 Visit us at www.Anaren.com USA/Canada: Toll Free: Europe: Asia: (315) 432-8909 (800) 411-6596 +44 2392-232392 +86 512-62749282