Bridge Diode Dual In-Line Package OUTLINE S1NB Unit : mm Weight : 0.29g typ. Package1NSMD 800V 1A 6.8 Type No. * DIP Class Feature S1NB 6094 10 Date code * Small-DIP - 2.6 Package1 NTHD Unit : mm Weight : 0.29gtyp. 6.8 Type No. Class Date code S1NB 6099 - 6.5 2.5 4.4 Web For details of outline dimensions, refer to our web site or the Semiconductor Short Form Catalog. As for the marking, refer to the specification "Marking, Terminal Connection". RATINGS Absolute Maximum Ratings Tl = 25unless otherwise specified Item Storage Temperature Operation Junction Temperature Maximum Reverse Voltage Average Rectified Forward Current Peak Surge Forward Current Current Squared Time Symbol Conditions Type No. S1NB60 S1NB80 Unit Tstg -40150 Tj 150 600 VRM IO IFSM It 2 800 VRSM700 50Hz Ta = 25 50Hz sine wave, Resistance load, On glass-epoxy substrate, Ta=25 50Hz Tj = 25 50Hz sine wave, Non-repetitive 1cycle peak value, Tj = 25 1mst10msTj = 25 per diode V 1 A 30 A 4.5 A2s Electrical Characteristics Tl = 25unless otherwise specified Forward Voltage Reverse Current Thermal Resistance 18 J534-1 VF IR jl ja Pulse measurement, per diode VR = VRM, Pulse measurement, per diode IF = 0.5A, Junction to Lead Junction to Ambient MAX 1.05 MAX 10 MAX 15 MAX 68 V A /W Small DIP Bridge S1NB CHARACTERISTIC DIAGRAMS Sine wave 50Hz 50Hz sine wave is used for measurements. Typical Semiconductor products generally have characterristic variation. Typical is a statistical average of the device's ability. J534-1 19 1. 2. OA AV / 3. 4. 5. 6. 7. 8. Notes 1. If you wish to use any such product, please be sure to refer to the specifications issued by Shindengen. 2. All products described or contained herein are designed with a quality level intended for use in standard applications requiring an ordinary level of reliability. If these products are to be used in equipment or devices for special or specific applications requiring an extremely high grade of quality or reliability in which failures or malfunctions of products may directly affect human life or health, a local Shindengen office must be contacted in advance to confirm that the intended use of the product is appropriate. Shindengen products are grouped into the following three applications according the quality grade. Standard applications Computers, office automation and other office equipment, communication terminals, test and measurement equipment, audio/visual equipment, amusement equipment, consumer electronics, machine tools, personal electronic equipment, industrial equipment, etc. Special applications Transportation equipment (vehicles, ships, etc.), trunk-line communication equipment, traffic signal control systems, anti-disaster/crime systems, safety equipment, medical equipment, etc. Specific applications Nuclear reactor control systems, aircraft, aerospace equipment, submarine repeaters, life support equipment and systems, etc. 3. Although Shindengen continuously endeavors to enhance the quality and reliability of its products, customers are advised to consider and take safety measures in their design, such as redundancy, fire containment and anti-failure, so that personal injury, fires, or societal damages can be prevented. 4. Please note that all information described or contained herein is subject to change without notice due to product upgrades and other reasons. When buying Shindengen products, please contact the Companys offices or distributors to obtain the latest information. 5. Shindengen shall not bear any responsibility with regards to damages or infringement of any third-party patent rights and other intellectual property rights incurred due to the use of information on this website. 6. The information and materials on this website neither warrant the use of Shindengen's or any third partys patent rights and other intellectual property rights, nor grant license to such rights. 7. In the event that any product described or contained herein falls under the category of strategic products controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, exporting of such products shall require an export license from the Japanese government in accordance with the above law. 8. No reprinting or reproduction of the materials on this website, either in whole or in part, is permitted without proper authorization from Shindengen.