THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE LEDI POLARITY LED2@ POLARITY COPIED, REPRODUCED OR DISCLOSED WITHOUT THE RoHS WRITTEN APPROVAL OF BEL FUSE INC. PIN 7 | PIN 8 | COLOR |} PIN 9 | PIN 10 | COLOR - + GREEN - + GREEN SCHEMATIC ELECTRICAL CHARACTERISTICS @ 25C LED1 RJ45 TURNS RATIO 7 = TX 1CT +1 RX 1CT +1 GREEN OCL @ 100kHz/100mVRMS 8 8mA DC BIAS 350uH MIN, TCT 1 ICT 11 INS. LOSS 1 TX+ 1MHz TO 100MHz -1,0 dB MAX T+ : d Louw RET, LOSS <MIND e silt aaa 1MHz-30MHz -18 oB TD- 3 i 2 TX- 30MH2-60MHz -18+20LUG<F/30MHz) oB 60MHz-80MHz -12 oB ICT CROSS TALK <TX - RX) RD+ 4 3 RX+ S00kHz1MHz -70 oB MIN 5 4 10 MHz -50 dB MIN RD- 5 e 30 MHz -45 oB MIN 3 RX 50 MHz -40 dB MIN - 100 MHz -35 oB MIN RCT 6 + 5 CM TO CM REJ 8 100kHz-1MHz -70 dB MIN 10 MHz -47 oB MIN 9 30 MHz -42 oB MIN GREEN Y 4% 7S0HMS 60 MHz -37 oB MIN 100 MHz -30 dB MIN 10 10000F 2@KV CM TO DM REJ LED2 p 100kHz-1MHz -70 dB MIN 10 MHz -60 dB MIN SHIELD) 7777 30 MHz -50 dB MIN 60 MHz -45 oB MIN LED1 and LED2 100 MHz -40 dB MIN _ HIPOT <Ieolation Voltage) 1500 Vrms VF <FORWARD VOLTAGED IF=20mA GREEN 2 2V TYP, 100% OF PRODUCTION TESTED TO COMPLY WITH AD (DOMINANT WAVELENGTH) IF=20mA GREEN 365nm TYP. IEEE 802.3 ISOLATION REQUIREMENTS. ORIGINATED BY DATE TITLE MagJack PART NO. / DRAWING NO. STANDARD DIM. |[ ] METRIC DIM. AS REFERENCE CHOW WANCHUNG 20le07-091 4 Cores, MDIX, CM Termination) O8BOIGITO6F TOL. IN INCH lr, INCH [mmj[rev.: 2 | fOeT DRAWN BY DATE O8B0-1G1T-06-F FILE NAME = TA SCALE: N/A SIZE : Ad | comonmrsZ, _ CON ED TAN QIGUANG 2012-07-09 PATENTED 08B01G1T06-F _B.DWG aE )--=-4 [Pack : 2 mANEn DC002(2)081111 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE MECHANICAL SPECIFICATION WRITTEN APPROVAL OF BEL FUSE INC, _>, ey x ) on " Ue _. 0.05510.020 Un 11.4040'51] ao a INO =1,005 [25.53] tl ot _! LED 2 LED 1 ou 0.025 [0.64] S a .! A =A GREEN\ |}-13233) GREEN eal ag p70250 [6.351 ra 1N 3 as rau LL oO Pras a z z aux oo BS U ae Om C RJ45 1 ao | >) a NG Sm o5 i mal (eel 0.566 [14.37] NOTES! 0125 3,18] PLASTIC HOUSING: THERMOPLASTIC PBT FLAMMABILITY RATING UL 94V-0 CONTACTS PLATING: 15 MICRO-INCH HARD GOLD PLATING OR EQUIVALENT, 3. THE PRODUCT IS RoHS COMPLIANT, ae (12,701 0.305 a 0.662 [16.81] PINS: TIN-COATED COPPER WIRE, DIA 0.018 INCH. 4, JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, METAL SHIELD: PRE-PLATED NICKEL ON COPPER ALLOY, PART 68 SUBPART F. [] MARK PART WITH MFG LOGO, MFG NAME, PART NUMBER AND DATE CODE. 5, THE PRODUCT IS PATENTED, THE PATENT NUMBER [2 PATENTED MARKING, IS US, PAT. 5,736,910, oe cSAosUL RECOGNIZED - FILE #6196366 AND 169987. ORIGINATED BY DATE TITLE MagJack PART NO. / DRAWING NO. STANDARD DIM. |[ ] METRIC DIM. AS REFERENCE ANTON LIAD 2012-07-09] 64 Cones, MDIX, CM Termination? 08B01G1T06-F TOL. IN INCH liar; IncH [mmjlrev; 2 | SOel DRAWN BY DATE 08B0-1G1T-06-F FILE NAME = SCALE: N/A _|SIZE: A4 | comommmnc, HE ZHEN 2012-07-09 PATENTED O8BO1GITO6-F_B.DWG xxx | 20.010 e}_|pacze: 3 | ere DC002(2)081111 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, NOTES: THE SHADED AREA ON THE CUSTOMER BOARD ARE RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR COMPONENT PAD. 0.710 [18,03] on 0.430 [10,92]+ 0.180 [4.57] 0.430 [10,92] 0,700 [17.78] 0.145 [3.68] WML LZ, 604 A_1_ 710 Lo} ig 03] 0.537 [13.64] 0.440 [11.17] RoHS RECOMMENDED PCB FOOTPRINT COMPONENT SIDE VIEW 0.635 [16.13] 0.500 [12.70] }| 0.0675 [1,71] b ~~. 2x 00, [93.25] Oo > oe [3.17] 2S 0.050 [1.27] +0,005 +0.13 20.035 905 [ 90.8970.13 | esas 38 6 PLACES FUR SIGNAL LEADS f 20.040+0.005 [ #1.02*9: 0.084 [2.15] 4 PLACES FOR LED LEADS 0.080 [2.03] PITCH 0,100 [2.54] ORIGINATED BY DATE ANTON LIAO 2012-07-09 DRAWN BY DATE HE ZHEN 2012-07-09 TITLE 4 Cores, MDIX, CM Termination) MagJack O8B01G1T06-F PART NO. / DRAWING NO. STANDARD Dim. |[ ] METRIC DIM. AS REFERENCE TOL. IN INCH | uni : INCH [mm]| REV. : 8B bel 08BO-1G1T-0O6-F FILE NAME PATENTED x XX OSBOIGITOE-F_BDWG Fs oo -@ esd pace: 4 SCALE: N/A SIZE : A4 | componmescs con 7D pDc002(2)081111 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE RoHS COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, SUGGESTED PANEL OPENING METAL PANEL 0,672 [17,06] VALLLLLLL 0.546 [13.871 QMO PCB NOTE: THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY, PACKING INFORMATION PACKING TRAY : 0200-9999-D4 CTOP) 0200-9999-DS <BOTTOM) PACKING QUANTITY : 60 PCS FINISHED GOODS PER TRAY 11 TRAYS (660 PCS FINISHED GOODS) PER CARTON BOX NOTE + CARDBOARDS ARE PLACED BETWEEN LAYERS OF PACKING TRAY INSIDE CARTON BOX CINCLUDE THE UPPERMOST AND LOWERMOST TRAY) ORIGINATED BY DATE TITLE MagJack PART NO. / DRAWING NO. STANDARD DIM. |[ ] METRIC DIM. AS REFERENCE ANTON LIAO 2012-07-09) 4 Cores, MDIX, CM Termination? OSBOIGLTOG-F TOL. IN INCH _ltwir; INGH [mmj[rev.: 2 | ROel DRAWN BY DATE 08B0-1G1T-06-F FILE NAME x SCALE: N/A SIZE : A4 | comonswnsc/, HE ZHEN 2012-07-09 PATENTED O8B01G1TO6-F_B,DWG ~ 10.004 46) e+ PAGE: 5 SRE rp DC002(2)081111 This document is electronically generated. This is a controlled copy if used internally