H7EC-NFV - OMRON - Datasheet.Live

CSM_H7E_-N_DS_E_9_2

Self-powered Totalizer

New H7E

Compact Economical Totalizer with High Visibility

Available with Backlit LCD Display

• Large display with 8.6-mm character height.

• Includes new models with backlight for improved visibility in dimly lit places. (Requires 24-VDC power supply.)

• Black and light-gray cases now available.

• PNP/NPN universal DC voltage input types now available.

• Battery is replaceable for Totalizer reuse and conservation of the environment.

• Key-protect switch to prevent faulty reset key operation.

• Dual operation mode.

• Front face compatible with NEMA4/IP66.

• Short body, all models have a depth of 48.5 mm.

• Finger protection terminal block conforms to VDE0106, Part100.

• Conforms to UL, CSA, and CE marking.

Conforms to EN61010-1 (pollution degree 2/overvoltage category III.)

• Conforms to EMC standards and EN61326, thus allowing use in residential, commercial and light- and heavy-industry environ-

ments.

• Six-language instruction manual provided.

• PCB-mounting models available. (Requires 3-V power supply.)

■Broad Line-up of the New H7E Series

Contents

Self-powered Totalizers

H7EC..................................................................................................................... 2

H7ET ..................................................................................................................... 9

H7ER..................................................................................................................... 16

H7E@-N@P ........................................................................................................... 22

Common to All Totalizers

Accessories........................................................................................................... 27

Precautions ........................................................................................................... 29

New H7E

Total Counter

• 8-digit

Time Counter Tachometer

New H7EC New H7ET New H7ER New H7E@-N@P

PCB-mounting Counter

• Total Counter (8-digit)

• Time Counter (999999.9h)

• 999999.9h/

3999d23.9h

• 999h59min59s/

9999h59.9min

• 1,000 s-1 with

1 pulse/rev. encoder

• 1,000.0 s-1 with

10 pulse/rev. encoder

• 1,000 min-1 with

60 pulse/rev. encoder

• 10,000 min-1 with

60 pulse/rev. encoder

• 1,000.0 min-1 with

600 pulse/rev. encoder

Self-powered Total Counter

New H7EC

• Eight-digits, counting range 0 to 99999999.

• Dual input speed: 30 Hz ←→ 1 kHz (except for AC/DC multi-

voltage input models)

For the most recent informat ion on models that have been certified f or

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

Note: Some configurations are not available.

Note:

Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.

Ordering Information

■Total Counters

■Accessories (Order Separately)

Note: 1. Provided with H7EC. (Order additional Brackets separately as required.)

2. Built into H7EC. Order replacements using the above model number before the service life expires.

123

H7EC - N -

1. Count Input

2. Case Color

3. Display

None: No-voltage input

V: PNP/NPN universal DC voltage input

FV: AC/DC multi-voltage input

None: Light gray

B: Black

None: 7-segment LCD without backlight

H: 7-segment LCD with backlight

Count input Max. counting speed Display Model

Light-gray body Black body

PNP/NPN universal DC

voltage input

(4.5 to 30 VDC)

30 Hz ←→ 1 kHz

(switchable) 7-segment LCD with

backlight H7EC-NV-H H7EC-NV-BH

7-segment LCD H7EC-NVH7EC-NV-B

A C/DC multi-voltage input

(24 to 240 VAC/VDC) 20 Hz 7-segment LCD H7EC-NFVH7EC-NFV-B

No-voltage 30 Hz ←→ 1 kHz

(switchable) 7-segment LCD H7EC-N H7EC-N-B

Name Model

Compact Flush Mounting Bracket Y92F-35

Flush Mounting Bracket (See note 1) Y92F-34

Wire-wrap Terminal (set of two Terminals) Y92S-37

Lithium Battery (See note 2) Y92S-36

Waterproof Packing (See note 1) Y92S-32

New H7EC

Specifications

■General

Note: 1. Separately ordered Wire-wrap Terminals (Y92S-37) are required.

2. Only PNP/NPN universal DC voltage input models (-H models) have a backlight.

■Ratings

Note: ON/OFF ratio 1:1

Item H7EC-NV-@

H7EC-NV-@HH7EC-NFV-@H7EC-N-@

Operating mode Up type

Mounting method Flush mounting

External connections Screw terminals, optional Wire-wrap Terminals (see note 1)

Reset External/Manual reset

Number of digits 8

Count input PNP/NPN universal DC voltage in-

put AC/DC multi-voltage input No-voltage input

Display 7-segment LCD with or without backlight, zero suppression (character height: 8.6 mm) (see note 2)

Max. counting speed 30 Hz/1 kHz 20 Hz 30 Hz/1 kHz

Case color Light gray or black (-B models)

Attachment Waterproof packing, Y92F-34 Flush Mounting Bracket

Approved standard UL863, CSA C22.2 No.14, Lloyds

Conforms to EN61010-1/IEC61010-1 (Pollution degree2/overvoltage category III)

Conforms to VDE0106/P100

Item H7EC-NV-@

H7EC-NV-@HH7EC-NFV-@H7EC-N-@

Supply voltage Backlight model: 24 VDC (0.3 W max.)

(only for backlight)

No-backlight model: Not required

(powered by built-in battery)

Not required (powered by built-in battery)

Count input High (logic) level: 4.5 to 30 VDC

Low (logic) level: 0 to 2 VDC

(Input impedance: Approx. 4.7 kΩ)

High (logic) level: 24 to 240 VAC/VDC,

50/60 Hz

Low (logic) level: 0 to 2.4 VAC/VDC, 50/

60 Hz

No voltage input

Maximum short-circuit impedance:

10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Reset input No voltage input

Maximum short-circuit impedance:

10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Max. counting

speed (see note) 30 Hz or 1 KHz

(Switchable with switch) 20 Hz 30 Hz or 1 KHz

(Switchable with switch)

Minimum signal

width 20 Hz: 25 ms

30 Hz: 16.7 ms

1 KHz: 0.5 ms

Reset system External reset and manual reset: Minimum signal width of 20 ms

Terminal screw

tightening torque 0.98 N·m max.

Ambient tempera-

ture Operating: –10°C to 55°C (with no condensation or icing)

Storage: –25°C to 65°C (with no condensation or icing)

Ambient humidity Operating 25% to 85%

New H7EC

■Characteristics

Note: 1. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

2. Weight includes waterproof packing and flush mounting bracket.

■Reference Value

Item H7EC-NV-@

H7EC-NV-@H

H7EC-NFV-@H7EC-N-@

Insulation resistance 100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts, and between the backlight power

supply terminal and count input termi-

nals/reset terminals for backlight mod-

els

100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal parts

and between count input terminals and

reset terminals

100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal parts

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between

current-carrying metal parts and ex-

posed non-current-carrying metal parts

and between the backlight power sup-

ply terminal and count input terminals/

reset terminals for backlight models

3,700 VAC, 50/60 Hz for 1 min between

current-carrying metal parts and ex-

posed non-current-carrying metal parts

2,200 VAC, 50/60 Hz for 1 min between

reset terminals and exposed non-cur-

rent-carrying metal parts and between

count input terminals and reset termi-

nals

1,000 VAC, 50/60 Hz for 1 min between

current-carrying metal parts and ex-

posed non-current-carrying metal parts

Impulse withstand

voltage

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

3 kV between input terminals and reset

terminals

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

Noise immunity Square-wave noise generated by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

±600 V (Between count input terminals/

Between reset terminals)

±480 V (Between the backlight power

supply terminals for backlight models)

±1.5 kV (Between count input termi-

nals)

±500 V (Between reset terminals)

±500 V (Between count input terminals/

Between reset terminals)

Static immunity ±8 kV (malfunction)

Vibration resistance Malfunction: 0.15-mm single amplitude at 10 to 55 Hz for 10 min each in 3 directions

Destruction: 0.375-mm single amplitude at 10 to 55 Hz for 2 hrs each in 3 directions

Shock resistance Malfunction: 200 m/s2 3 times each in 6 directions

Destruction: 300 m/s2 3 times each in 6 directions

EMC (EMI) EN61326-1 (See note 1.)

Emission Enclosure: EN55011 Group 1 class B

(EMS) EN61326-1 (See note 1.)

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference from AM Radio Waves:

EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)

Immunity RF-interference from Pulse-modulated Radio Waves:

EN61000-4-3: 10 V/m (900 MHz ± 5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst: EN61000-4-4: 2 kV power line (level 3)

2 kV I/O signal line (level 4)

Degree of protection Front panel: IP66, NEMA4

Terminal block: IP20

Weight (see note 2.) No-backlight model: Approx. 60 g

Backlight model: Approx. 65 g

Approx. 60 g Approx. 60 g

Item Value Note

Battery life 7 years min. with continuous input at 25°C

(lithium battery)

The battery life is calculated according to the conditions in the left column and

therefore is not a guaranteed value. Use these value as reference for mainte-

nance or replacement.

New H7EC

Connections

■Terminal Arrangement

Bottom view: View of the Total Counter rotated horizontally 180°

■Connections

H7EC Total Counter

Note: 1. Terminals 2 and 4 (input circuit and rese t circuit) are func-

tionally isolated.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 100 µA

Backlight Model No-backlight Model

Backlight

24 VDC

Count

input Reset

input

Count

input Reset

input

PNP/NPN Universal DC Voltage Input Model With Backlight

1. Contact Input (Input by a Relay or Switch Contact) 2. Solid-state Input

Relay

Input Reset

Relay

or Switch or Switch

Input Reset

Backlight

24 VDC

Open collector of a

PNP transistor Open collector of a

PNP transistor

Backlight

24 VDC

or Open collector of an

NPN transistor or Open collector of an

NPN transistor

New H7EC

No-voltage Input Model

1. Contact Input (Input by a Relay or Switch Contact)

AC/DC Multi-voltage Input Model

PNP/NPN Universal DC Voltage Input Model Without Backlight

1. Contact Input (Input by a Relay or Switch Contact)

2. Solid-state Input

Relay Input Reset Relay

or Switch or Switch

or Switch

Input Reset

Relay

Input Reset

or Switch or Switch

Relay

Input Reset

Relay

or Switch or Switch

Input Reset

Open collector of a

PNP transistor Open collector of a

PNP transistor

or Open collector of an

NPN transistor or Open collector of an

NPN transistor

Note: 1. Terminals 2 and 4 (input circuit and reset circuit) are

functionally isolated.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 100 µA

or Open collector of

an NPN transistor

Note: Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 1 µA

Terminals 2 and 4 are

internally connected.

Note: Use Relays and Switches that have high contact

reliability because the current flowing from terminals

1 or 3 is small. It is recommended that OMRON's

G3TA-IA/ID be used as the SSR.

2. Solid-state Input

(Open Collector Input of an NPN Transistor)

Open collector of an

NPN transistor Open collector of an

NPN transistor

Terminals 2 and 4 are

internally connected.

Note: 1. Residual voltage in the output section of Proximity

Sensors or Photoelectric Sensors becomes less than

0.5 V because the current flowing from terminals 1 or 3

is small thus allowing easy connection.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 1 µA

New H7EC

Operation

■Operating Modes

Nomenclature

Note: 1. Perform switch setting before mounting to a control panel.

2. If the counting speed setting is changed, the present value will not be held. Press the Reset Key on the front panel.

3. Key protection is used to prohibit operating the Reset Key. The reset input terminals will still be functional.

H7EC Total Counter

Reset

Counting display values

Full-scale

Count input

Incrementing Operation

(Up)

(Full-scale

−1)

H7EC

1 kHz

Front view

Bottom view

Reset Key

Key-protect Switch

Counting speed switch

Key-protect

Front panel

Terminal block

Counting speed

Front panel

Terminal block

For all models except for H7EC-NFV-@.

If the counting speed setting is changed,

the present value will not be held and so

press the Reset Key on the front panel.

Setting

(see note)

30 Hz

(default setting)

Setting

(see note)

OFF

(default setting)

Reset the count value. Not operable

under key-protect.

Concave

side

Concave

side

The Reset Key is not operable while the

key-protect switch is set to ON.

Concave

side

Concave

side

New H7EC

Dimensions

Note: All units are in millimeters unless otherwise indicated.

H7EC-N

Note: A Compact Flush Mounting Bracket (Y92F-35) can also be used. Refer to Accessories for details.

22.2

+0.5

22.2

+0.5

Panel Cutout

Dimensions with Y92F-34 Flush Mounting Bracket

Separate mounting

Dense mounting

40 min.

(48 Units − 2.5)+1.0

Waterproofing is not possible for

dense mounting

• When mounting, insert the Counter into

the cutout, insert the adapter from the

back and push in the Counter while

making the gap between the front panel

and the cutout panel as small as

possible. Use screws to secure the

Counter. If waterproofing is desired,

insert the waterproof packing.

• When several Counters are installed,

ensure that the ambient temperature

will not exceed specifications.

• The appropriate thickness of the panel

is 1 to 5 mm.

M3.5 terminal screw

Self-powered Time Counter

New H7ET

• Seven digits, time range 0 to 3999d23.9h.

• Dual time range: 999999.9 ←→ 3999d23.9h or

999h59m59s ←→ 9999h59.9 m

For the most recent informat ion on models that have been certified f or

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

Note: Some configurations are not available.

Note:

Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.

Ordering Information

■Time Counters

■Accessories (Order Separately)

Note: 1. Provided with H7ET. (Order additional Brackets separately as required.)

2. Built into H7ET. Order replacements using the above model number before the service life expires.

12 34

H7ET - N -

1. Count Input

2. Time Range

3. Case Color

4. Display

None: No-voltage input

V: PNP/NPN universal DC voltage input

FV: AC/DC multi-voltage input

None: 999999.9h/3999d23.9h

1: 999h59m59s/9999h59.9m

None: Light gray

B: Black

None: 7-segment LCD without backlight

H: 7-segment LCD with backlight

Timer input Display Time range

999999.9h ←→ 3999d23.9h

(switchable) 999h59min59s ←→ 9999h59.9min

(switchable)

Light-gray body Black body Light-gray body Black body

PNP/NPN universal DC volt-

age input

(4.5 to 30 VDC)

7-segment LCD with back-

light H7ET-NV-H H7ET-NV-BH H7ET-NV1-H H7ET-NV1-BH

7-segment LCD H7ET-NVH7ET-NV-B H7ET-NV1H7ET-NV1-B

AC/DC multi-voltage input

(24 to 240 VAC/VDC) 7-segment LCD H7ET-NFVH7ET-NFV-B H7ET-NFV1H7ET-NFV1-B

No-voltage input 7-segment LCD H7ET-N H7ET-N-B H7ET-N1 H7ET-N1-B

Name Model

Compact Flush Mounting Bracket Y92F-35

Flush Mounting Bracket (See note 1) Y92F-34

Wire-wrap Terminal (set of two terminals) Y92S-37

Lithium Battery (See note 2) Y92S-36

Waterproof Packing (See note 1) Y92S-32

New H7ET

Specifications

■General

Note: 1. Only PNP/NPN universal DC voltage input models (-H models) have a backlight.

2. The frequency range for an AC voltage is 50 to 60 Hz.

3. “-hours”, “-d-h”, “-h-m”, and “-h-m-s” labels are included.

4. Zero suppression: Zeros are not displayed to increase readability. For example, "000008.2" is displayed as "8.2" if zero suppression is

set. If the range is set to 3999d23.9h, the value is "008.2".

■Ratings

Item H7ET-NV-@

H7ET-NV-@HH7ET-NFV-@H7ET-N-@H7ET-NV1-@

H7ET-NV1-@HH7ET-NFV1-@H7ET-N1-@

Operating mode Accumulating

Mounting method Flush mounting

External connections Screw terminals

Reset External/Manual reset

Display 7-segment LCD with or without backlight, zero suppression (character height: 8.6 mm) (see note 1)

Number of digits 7

Time range 0.0h to 999999.9h ←→ 0.0h to 3999d23.9h

(switchable with switch) 0s to 999h59min59s ←→ 0.0min to 9999h59.9min

(switchable with switch)

Timer input PNP/NPN univer-

sal DC voltage in-

put

AC/DC multi-volt-

age input No-voltage input

(see note 2) PNP/NPN univer-

sal DC voltage in-

put

AC/DC multi-volt-

age input No-voltage input

Case color Light gray or black (-B models)

Attachment Waterproof packing, Y92F-34 Flush Mounting Bracket, time unit labels (see note 3)

Approved standard UL863, CSA C22.2 No.14, Lloyds

Conforms to EN61010-1/IEC61010-1 (pollution degree2/overvoltage category III)

Conforms to VDE0106/P100

Item H7ET-NV@-@

H7ET-NV@-@HH7ET-NFV@-@H7ET-N@-@

Supply voltage Backlight model: 24 VDC (0.3 W max.)

(for backlight)

No-backlight model: Not required (pow-

ered by built-in battery)

Not required (powered by built-in battery)

Timer input High (logic) level: 4.5 to 30 VDC

Low (logic) level: 0 to 2 VDC

(Input impedance: Approx. 4.7 kΩ)

High (logic) level: 24 to 240 VAC/VDC,

50/60 Hz

Low (logic) level: 0 to 2.4 VAC/VDC, 50/

60 Hz

No voltage input

Maximum short-circuit impedance:

10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Reset input No voltage input

Maximum short-circuit impedance:

10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Minimum pulse

width 1 s

Reset system External reset and manual reset: Minimum signal width of 20 ms

Te rminal screw

tightening torque 0.98 N·m max.

Ambient tempera-

ture Operating: –10°C to 55°C (with no condensation or icing)

Storage: –25°C to 65°C (with no condensation or icing)

Ambient humidity Operating: 25% to 85%

New H7ET

■Characteristics

Note: 1. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

2. Weight includes waterproof packing and flush mounting bracket.

■Reference Value

Item H7ET-NV@-@

H7ET-NV@-H@H7ET-NFV@-@H7ET-N@-@

Time accuracy ±100 ppm (25°C)

Insulation resistance 100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts, and between the backlight pow-

er supply and timer input terminals/re-

set terminals for backlight models

100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts and between timer input termi-

nals and reset terminals

100 MΩ min. (at 500 VDC) between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts and between the backlight power

supply and timer input terminals/reset

terminals for backlight models

3,700 VAC, 50/60 Hz for 1 min between

timer input terminals and exposed non-

current-carrying metal parts

2,200 VAC, 50/60 Hz for 1 min between

reset terminals and exposed non-cur-

rent-carrying metal parts and between

timer input terminals and reset termi-

nals

1,000 VAC, 50/60 Hz for 1 min between

current-carrying metal parts and ex-

posed non-current-carrying metal

parts

Impulse withstand

voltage

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

3 kV between timer input terminals and

reset terminals

4.5 kV between current-carrying termi-

nal and exposed non-current-carrying

metal parts

Noise immunity Square-wave noise generated by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

±600 V (Between timer input terminals/

Between reset terminals)

±480 V (Between the backlight power

supply terminals for backlight models)

±1.5 kV (Between timer input termi-

nals)

±500 V (Between reset terminals)

±500 V (Between timer input terminals/

Between reset terminals)

Static immunity ±8 kV (malfunction)

Vibration resistance Malfunction: 0.15-mm single amplitude at 10 to 55 Hz for 10 min each in 3 directions

Destruction: 0.375-mm single amplitude at 10 to 55 Hz for 2 hrs each in 3 directions

Shock resistance Malfunction: 200 m/s2 3 times each in 6 directions

Destruction: 300 m/s2 3 times each in 6 directions

EMC (EMI) EN61326-1 (See note 1.)

Emission Enclosure: EN55011 Group 1 class B

(EMS) EN61326-1 (See note 1.)

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference from AM Radio Waves:

EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)

Immunity RF-interference from Pulse-modulated Radio Waves:

EN61000-4-3: 10 V/m (900 MHz ± 5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst: EN61000-4-4: 2 kV power line (level 3)

2 kV I/O signal line (level 4)

Degree of protection Front panel: IP66, NEMA4 with waterproof packing

Terminal block: IP20

Weight (see note 2.) No-backlight model: Approx. 60 g

Backlight model: Approx. 65 g

Approx. 60 g Approx. 60 g

Item Value Note

Battery life 10 years min. with continuous input at

25°C (lithium battery)

The battery life is calculated according to the conditions in the left column and

therefore is not a guaranteed value. Use these value as reference for mainte-

nance or replacement.

New H7ET

Connections

■Terminal Arrangement

Bottom view: View of the Time Counter rotated horizontally 180°

■Connections

H7ET Time Counter

Note: 1. Ter minals 2 and 4 (input circuit and reset circuit) are func-

tionally isolated.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 1 µA

Backlight Model No-backlight Model

Backlight

24 VDC

Timer

input Reset

input

Timer

input Reset

input

PNP/NPN Universal DC Voltage Input Model With Backlight

1. Contact Input (Input by a Relay or Switch Contact)

Relay

Input Reset

Relay

or Switch or Switch

Input Reset

2. Solid-state Input

Backlight

24 VDC

Open collector of a

PNP transistor Open collector of a

PNP transistor

Backlight

24 VDC

or Open collector of an

NPN transistor or Open collector of an

NPN transistor

New H7ET

Relay

No-voltage Input Model

1. Contact Input (Input by a Relay or Switch Contact)

AC/DC Multi-voltage Input Model

PNP/NPN Universal DC Voltage Input Model Without Backlight

1. Contact Input (Input by a Relay or Switch Contact)

2. Solid-state Input

Relay

Input Reset

Relay

or Switch or Switch

Input Reset

Relay

Input Reset

or Switch or Switch

or Switch

Input Reset

Relay Input Reset Relay

or Switch or Switch

Open collector of a

PNP transistor Open collector of a

PNP transistor

or Open collector of an

NPN transistor or Open collector of an

NPN transistor

Note: 1. Terminals 2 and 4 (input circuit and reset circuit) are

functionally isolated.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 1 µA

or Open collector of

an NPN transistor

Terminals 2 and 4 are

internally connected.

Note: Use Relays and Switches that have high contact

reliability because the current flowing from terminals 1

or 3 is as small as approx. 10 µA. It is recommended

that OMRON's G3TA-IA/ID be used as the SSR.

2. Solid-state Input

(Open Collector Input of an NPN Transistor)

Open collector of an

NPN transistor Open collector of an

NPN transistor

Terminals 2 and 4 are

internally connected.

Note: 1. Residual voltage in the output section of Proximity

Sensors or Photoelectric Sensors becomes less

than 0.5 V because the current flowing from

terminals 1 or 3 is as small as approx. 10 µA, thus

allowing easy connection.

2. Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 1 µA

New H7ET

Operation

■Operating Modes

Nomenclature

Note: Perform switch setting before mounting to a control panel.

H7ET Time Counter

Full-scale

Reset

Timer input

Timer display values

Incrementing Operation

(Up)

Internal clock

timer value

(Full-scale

−0.1 (1))

H7ET

ront v

Bottom view

Reset Key

Display Values for a Time Range of ”0.0h to 3999d23.9h”

Key-protect Switch

Time-range switch

Key-protect

Front panel

Terminal block

H7ET-N@@-@@

Front panel

0.0h to 3999d23.9h

Terminal block

Time range

H7ET-N@@1-@@

0.0min to 9999h59.9min

If the time-range setting is

changed, the present

value will not be held and

so press the Reset Key on

the front panel.

If the time-range switch is set to ”0.0h to 3999d23.9h,” the four leftmost digits are the number of days and the three rightmost

digits are the number of hours.

The initial value after resetting is 000.00 (0 days, 00.0 hours).

After ”023.9” (0 days, 23.9 hours), the display will change to ”100.0” (1 days, 00.0 hours).

LCD Examples for ”0.0h to 3999d23.9h” Range

Setting

(see note)

0.0h to 999999.9h

(default setting)

0s to 999h59min59s

(default setting)

Setting

(see note)

OFF

(default setting)

Reset the count value. Not operable

under key-protect.

Location to Attach

Unit Label

Attach the correct unit

label for the time range

that is set.

Concave

side

Concave

side

Concave

side

Concave

side

The Reset Key is not operable while the

key-protect switch is set to ON.

d h d h d h

After 24

hours, 54

minutes After 24

hours

New H7ET

Dimensions

Note: All units are in millimeters unless otherwise indicated.

H7ET-N

Note: A Compact Flush Mounting Bracket (Y92F-35) can also be used. Refer to Accessories for details.

22.2+0.5

45+0.5

22.2+0.5

Dimensions with Y92F-34 Flush Mounting Bracket

Panel Cutout

Separate mounting

Dense mounting

40 min.

(48 Units − 2.5)+1.0

Waterproofing is not possible

for dense mounting

• When mounting, insert the Counter into

the cutout, insert the adapter from the

back and push in the Counter while

making the gap between the front panel

and the cutout panel as small as

possible. Use screws to secure the

Counter. If waterproofing is desired,

insert the waterproof packing.

• When several Counters are installed,

ensure that the ambient temperature

will not exceed specifications.

• The appropriate thickness of the panel

is 1 to 5 mm.

Self-powered Tachometer

New H7ER

• Revolutions displayed up to five digits.

• Dual revolution display according to encoder resolution used;

1000 s–1/1000 min–1 or 1000.0 s–1 /1000.0 min–1

• Switchable dual revolution display type available (-NV1 models);

extended up to 10000 min–1

For the most recent informat ion on models that have been certified f or

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

Note: Some configurations are not available.

Note:

Estimates can be provided for coatings and other specifications that are not given in the datasheet. Ask your OMRON representative for details.

Ordering Information

■Tachometers

■Accessories (Order Separately)

Note: 1. Provided with H7ER. (Order additional Brackets separately as required.)

2. Built into H7ER. Order replacements using the above model number before the service life expires.

12 34

H7ER - N -

1. Count Input

2. Number of Digits

3. Case Color

4. Display

None: No-voltage input

V: PNP/NPN universal DC voltage input

None: 4 digits

1: 5 digits

None: Light gray

B: Black

None: 7-segment LCD without backlight

H: 7-segment LCD with backlight

Count input Display Max. revolutions displayed (applicable encoder resolution)

1000 s–1 (1 pulse/rev.),

1000 min–1 (60 pulse/rev.) 1000.0 s–1 (10 pulse/rev.),

1000.0 min–1 (600 pulse/rev.) ←→

10000 min–1 (60 pulse/rev.) (switchable)

Light-gray body Black body Light-gray body Black body

PNP/NPN universal

DC voltage input

(4.5 to 30 VDC)

7-segment LCD

with backlight H7ER-NV-H H7ER-NV-BH H7ER-NV1-H H7ER-NV1-BH

7-segment LCD H7ER-NV H7ER-NV-B H7ER-NV1 H7ER-NV1-B

No-voltage input 7-segment LCD H7ER-N H7ER-N-B --- ---

Name Model

Compact Flush Mounting Bracket Y92F-35

Flush Mounting Bracket (See note 1) Y92F-34

Wire-wrap Terminal (set of two terminals) Y92S-37

Lithium Battery (See note 2) Y92S-36

Waterproof Packing (See note 1) Y92S-32

New H7ER

Specifications

■General

Note: 1. Reset is not available.

2. When there is no input, the display will be 0.0 or 0.

3. Separately ordered Wire-wrap Terminals (Y92S-37) are required.

4. Only PNP/NPN Universal DC voltage input models have a backlight.

5. “rpm”, “rps”, “s–1” and “min–1” labels are included.

6. "s-1" in "1,000 s-1" means the same thing as RPS. "min-1" means the same thing as RPM.

■Ratings

Note: 5-digit models :1 kHz/10 kHz switchable.

Item H7ER-NV-@

H7ER-NV-@HH7ER-N-@H7ER-NV1-@

H7ER-NV1-@H

Operating mode Up type

Mounting method Flush mounting

External connections Screw terminals, Wire-wrap Terminals (see note 3)

Display 7-segment LCD with or without backlight, zero suppression (character height: 8.6 mm) (see note 4)

Number of digits 45

Count input PNP/NPN universal DC

voltage input No-voltage input PNP/NPN universal DC voltage input

Max. counting speed 1 kHz 10 kHz

Max. revolutions displayed

(see note 5, 6) 1,000 s–1 (When encoder resolution of 1 pulse/rev is

used.)

1,000 min–1 (When encoder resolution of 60 pulse/

rev is used.)

1,000.0 s–1 (When encoder resolution of 10 pulse/rev

is used.)

1,000.0 min–1 (When encoder resolution of

600 pulse/rev is used.)

←→ 10,000 min–1 (When encoder resolution of

60 pulse/rev is used.)

(Switchable with switch)

Attachment Waterproof packing, Y92F-34 Flush Mounting Bracket, revolution unit labels (see note 5)

Approved standard UL863, CSA C22.2 No.14, Lloyds

Conforms to EN61010-1/IEC61010-1 (Pollution degree2/overvoltage category III)

Conforms to VDE0106/P100

Item H7ER-NV@-@

H7ER-NV@-@HH7ER-N-@

Supply voltage Backlight model: 24 VDC (0.3 W max.) (for bac klight

lit)

No-backlight model: Not required (powered by built-

in battery)

Not required (powered by built-in battery)

Count input High (logic) level: 4.5 to 30 VDC

Low (logic) level: 0 to 2 VDC

(Input impedance: Approx. 4.7 kΩ)

No voltage input

Maximum short-circuit impedance: 10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Max. counting speed 4-digit models:1 kHz

5-digit models:10 kHz 1 kHz

Minimum signal width 10 kHz:0.05 ms

1 kHz: 0.5 ms (See note.)

Terminal screw tightening torque 0.98 N·m max.

Ambient temperature Operating: –10°C to 55°C (with no condensation or icing)

Storage: –25°C to 65°C (with no condensation or icing)

Ambient humidity Operating: 25% to 85%

New H7ER

■Characteristics

Note: 1. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

2. Weight includes waterproof packing and flush mounting bracket.

■Reference Value

Item H7ER-NV@-@

H7ER-NV@-@H

H7ER-N-@

Insulation resistance 100 MΩ min. (at 500 VDC) between current-carrying

metal parts and exposed non-current-carrying metal

parts, and between the backlight power supply and

count input terminals/reset terminals for backlight

models

100 MΩ min. (at 500 VDC) between current-carrying

metal parts and exposed non-current-carrying metal

parts

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between current-car-

rying metal parts and exposed non-current-carrying

metal parts and between the backlight power supply

and count input terminals/reset terminals for back-

light models

1,000 VAC, 50/60 Hz for 1 min between current-car-

rying metal parts and exposed non-current-carrying

metal parts

Impulse withstand voltage 4.5 kV between current-carrying terminal and exposed non-current-carrying metal parts

Noise immunity Square-wave noise generated by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

±600 V (Between count input terminals)

±480 V (Between the backlight power supply termi-

nals for backlight models)

±500 V (Between count input terminals)

Static immunity ±8 kV (malfunction)

Vibration resistance Malfunction: 0.15-mm single amplitude at 10 to 55 Hz for 10 min each in 3 directions

Destruction: 0.375-mm single amplitude at 10 to 55 Hz for 2 hrs each in 3 directions

Shock resistance Malfunction: 200 m/s2 3 times each in 6 directions

Destruction: 300 m/s2 3 times each in 6 directions

EMC (EMI) EN61326-1 (See note 1.)

Emission Enclosure: EN55011 Group 1 class B

(EMS) EN61326-1 (See note 1.)

Immunity ESD: EN61000-4-2: 4 kV contact discharge (level 2)

8 kV air discharge (level 3)

Immunity RF-interference from AM Radio Waves:

EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)

Immunity RF-interference from Pulse-modulated Radio Waves:

EN61000-4-3: 10 V/m (900 MHz ± 5 MHz) (level 3)

Immunity Conducted Disturbance: EN61000-4-6: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst: EN61000-4-4: 2 kV power line (level 3)

2 kV I/O signal line (level 4)

Degree of protection Front panel: IP66, NEMA4 with waterproof packing

Terminal block: IP20

Weight (see note 2.) No-backlight model:Approx. 60 g

Backlight model: Approx. 65 g

Item Value Note

Battery life 7 years min. with continuous input at 25°C

(lithium battery)

The battery life is calculated according to the conditions in the left column and

therefore is not a guaranteed value. Use these value as reference for mainte-

nance or replacement.

New H7ER

Connections

■Terminal Arrangement

Bottom view: View of the Tachometer rotated horizontally 180°

■Connections

H7ER Tachometer

Note: Select input transistors according to the following:

Dielectric strength of the collector ≥ 50 V

Leakage current < 100 µA (1 µA for no-voltage input model)

Backlight Model No-backlight Model

Backlight

24 VDC

Pulse

input

Pulse

input

No-voltage Input Model

Transistor Input (Open Collector of an NPN Transistor)

PNP/NPN Universal DC Voltage Input Models Without Backlight

Transistor Input

Input

PNP/NPN Universal DC Voltage Input Models With Backlight

Transistor Input

Open collector of

an NPN transistor Open collector of

an PNP transistor Backlight

24 VDC

Open collector of

an NPN transistor Open collector of

an PNP transistor

Open collector of

an NPN transistor

New H7ER

Operation

■Operating Modes

Nomenclature

Note: Perform switch setting before mounting to a control panel.

0.25 s

Internal gate

Display refreshed

Internal count value

Counter reset Refresh

Number display

H7ER Tachometer

Incrementing Operation

Within Unit Time (Up)

Count period

(1 s) Count period

(1 s)

Previous count

value display

Display refreshed

every 1.25 s Display refreshed

every 1.25 s

1000.0 min-1

1000.0 s-1

1000 s-1

1000 min-1

H7ER

Concave

side

Concave

side

Front view

Bottom view

Counting speed switch

For H7ER-NV1-@@

Front panel

Terminal block

H7ER-NV1-@@ 60 pulse/rev. "min-1" or "rpm"

"min-1" or "rpm"

600 pulse/rev.

10 pulse/rev. "s-1" or "rps"

60 pulse/rev. "min-1" or "rpm"

1 pulse/rev. "s-1" or "rps"

Counting Speed Switch Settings and Unit Label Application

Model

Not used

Counting speed

switch setting

(see note) Max. revolutions

displayed Applicable encoder

resolution Applicable unit

label

H7ER-N-@

H7ER-NV-@@

No setting is

required

10000 min-1

(default setting)

Applicable

unit label

New H7ER

Dimensions

Note: All units are in millimeters unless otherwise indicated.

H7ER-N

Note: A Compact Flush Mounting Bracket (Y92F-35) can also be used. Refer to Accessories for details.

22.2+0.5

45+0.5

22.2+0.5

Dimensions with Y92F-34 Flush Mounting Bracket

Panel Cutout

Separate mounting

Dense mounting

40 min.

(48 Units − 2.5)+1.0

Waterproofing is not possible

for dense mounting

• When mounting, insert the Counter into

the cutout, insert the adapter from the

back and push in the Counter while

making the gap between the front panel

and the cutout panel as small as

possible. Use screws to secure the

Counter. If waterproofing is desired,

insert the waterproof packing.

• When several Counters are installed,

ensure that the ambient temperature

will not exceed specifications.

• The appropriate thickness of the panel

is 1 to 5 mm.

PCB-mounting Counters

H7E@-N@P

• Dedicated for use on PCB.

• Total Counters and Time Counter av ailable.

For the most recent informati on on models that have been certified for

safety standards, refer to your OMRON website.

Model Number Structure

■Model Number Legend

Ordering Information

■PC Board-use Counters

■Accessory (Order Separately)

H7E - N P

1. Function

2. Max. Counting Speed for H7EC Models

C: Total Counter

T: Time Counter

None: 1 kHz

L: 30 Hz

Count input Display Total counter Time counter

Max. counting speed

1 kHz 30 Hz

No-voltage input 7-segment LCD H7EC-NP H7EC-NLP H7ET-NP

Connecting Socket (28-pin) XR2A-2801-N

H7E@-N@P

Specifications

■General

■Ratings

Note: ON/OFF ratio 1:1

■Characteristics

Note: 1. Industrial electromagnetic environment (EN/IEC 61326-1 Table 2)

2. The power supply terminals of the H7E@-N@P are considered as 3-VDC control terminals.

Item Total Counter Time Counter

H7EC-NP H7EC-NLP H7ET-NP

Operating mode Up type

Mounting method Direct mounting on PC Board or mounting on 28-pin socket

Reset External reset, Power-OFF reset

Number of digits 87

Time range --- 0.0h to 999999.9h

Max. counting speed 1 kHz 30 Hz ---

Count/Timer input No-voltage input

Display 7-segment LCD (character height: 8.6 mm)

Case color Transparent

Approved standard UL863, CSA C22.2 No.14

Item H7EC-NP

H7EC-NLP

H7ET-NP

Supply voltage 3 VDC (2.7 to 3.3 VDC)

Count/Timer input No voltage input

Maximum short-circuit impedance: 10 kΩ max.

Short-circuit residual voltage: 0.5 V max.

Minimum open impedance: 750 kΩ min.

Reset input

Max. counting speed (see note) 1 kHz: Minimum signal width of 0.5 ms

30 Hz: Minimum signal width of 16.7 ms

---

Minimum signal input width --- 1 s

Reset system External reset: Minimum signal width of 20 ms

Power-OFF reset: Minimum power OFF time of 500 ms

Ambient temperature Operating: –10°C to 55°C (with no condensation or icing)

Storage: –25°C to 65°C (with no condensation or icing)

Ambient humidity Operating: 25% to 85%

Item H7EC-NP

H7EC-NLP

H7ET-NP

Time accuracy --- ±100 ppm (25°C)

Noise immunity Square-wave noise generated by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)

±500 V (Between count or timer input terminals/Between reset terminals)

Static immunity ±8 kV (malfunction)

Vibration resistance Malfunction:0.15-mm single amplitude at 10 to 55 Hz for 10 min each in 3 directions

Destruction:0.375-mm single amplitude at 10 to 55 Hz for 2 hrs each in 3 directions

Shock resistance Malfunction:200 m/s2 3 times each in 6 directions

Destruction:300 m/s2 3 times each in 6 directions

EMC (EMI) EN61326-1 (See note 1.)

Emission Enclosure: EN55011 Group 1 class B

(EMS) EN61326-1 (See note 1.)

Immunity ESD: EN61000-4-2: 4-kV contact discharge (level 2)

8-kV air discharge (level 3)

Immunity RF-interference from AM Radio Waves:

EN61000-4-3: 10 V/m (80 MHz to 1 GHz) (level 3)

Immunity RF-interference from Pulse-modulated Radio Waves:

EN61000-4-3: 10 V/m (900 MHz ± 5 MHz) (level 3)

Immunity Conducted Disturbance (see note):EN61000-4-6: 10 V (0.15 to 80 MHz) (level 3)

Immunity Burst (see note 2.): EN61000-4-4: 2-kV I/O signal line (level 4)

Weight Approx. 20 g

H7E@-N@P

Connections

■Terminal Arrangement

■Connections

Power Supply and Battery Connections

Battery Connections

When designi ng a circ uit, keep the pow er wiring conne ction s shorter than 50

mm. Refer to the connection diagram above for the proper wiring polarity.

The life expectancy of a battery power supply can be calculated by

the following formula:

t = A/lc

Where,

t: Life expectancy of battery (h)

A: Battery capacity (mAh)

lc: H7E@-N@P current consumption (mA)

Example:

Battery life when using a 3-V lithium battery with a capacity of

1,200 mAh for the H7E@-N@P.

t = 1,200 [mAh]/20 × 10–3 [mA] = 60,000 hours (approx. 6.8 years)

The battery capacity varies depending on the type of battery used;

oxidized silver, mercury, or lithium battery.

Voltage Division of Power Supply Circuit

When necessary, the volta ge from the ba ttery may b e divided b y resi stances:

When doing so, however, ensure that the following equation balances:

E (V) × R2 / (R1 + R2) = 3 V

Allow a current high enough to flow through R1 so that the H7E@-

N@P receives sufficient current.

C is a film capacitor, of about 0.1 μF, and is intended to absorb noise

induced by the power lines.

Keep the wiring between the H7E@-N@P and R2 or C as short as

possible (within 50 mm).

Backup Circuit for Protection Against Power F ailure

Use a diode (D) having a forward voltage as small as possible (0.1 V

max. at IF of 20 μA).

Determine the ratio of R1 to R2 in accordance with the forward volt-

age of the diode to be used. Be aware that when the power supplied

to the H7E@-N@P has dropped to less than the voltage of the

backup circuit, the battery will discharge.

To protect the circuit against a momentary power failure, an aluminum

electrolyte capacitor can be used in place of a battery, as shown below:

When a capacitor is used, its backup time can be calculated by the

following formula:

t = C (V1 – V2) / Ic

Where,

t: Backup time (s)

C: Capacitance (μF)

V1: Supply voltage before power failure (V)

V2: Minimum operating voltage of H7E@-N@P (V)

Ic:H7E@-N@P current consumption (μA)

Example:

Backup time by an aluminum electrolytic capacitor of 100 μF. (Mini-

mum operating voltage of H7E@-N@P is 2.6 V.)

t = 100 μF × (3–2.6 V)/20 μA = 100 × 0.40/20 = 2.0 seconds

Note that the above calculation provides an approximate value,

which varies depending on the environment under which the Counter

is used and also on the type of capacitors used. Provide some allow-

ance in selecting capacitors.

Keep the wiring between the H7E@-N@P and R2 or C as short as

possible (within 50 mm).

13 12 14

28 26 17 15

H7EC-N@P H7ET-NP

3-VDC external

power supply

Reset

inputCount

inputReset

inputTimer

input

3-VDC external

power supply

Bottom viewBottom view

omronH7EC COUNTS

13 12 14

28 26 17 15

omronH7ET COUNTS

Top viewTop view

5 V 12 V 24 V

R12 kΩ9.1 kΩ33 kΩ

R23 kΩ3 kΩ4.7 kΩ

3-V battery

H7E@-N@P

3-V

bat-

tery Backup

circuit

H7E@-N@P

Backup

circuit

H7E@-N@P

Input Connections

Input Connection Contact Input

When the H7EC-NP is used, relay chattering may be counted. Use

the H7EC-NLP, one of the low-speed input models.

Solid State Input

Use a transistor for input that satisfies the following conditions:

Collector breakdown voltage ≥ 50 V

Leakage current < 1 µA

Use a diode (D) having a forward voltage as small as possible (0.1 V

max. at IF of 20 µA).

Operation

■Operating Modes

Reset input Count/Timer input

Or Or

H7E@-N@P

Relay Relay

Open-collector Transistor Input

Reset input Count/Timer input

H7E@-N@P

TTL or C-MOS IC Input

Reset input Count/Timer input

TTL or C-MOS IC TTL or C-MOS IC

H7E@-N@P

H7EC Total Counter H7ET Time Counter

Reset

Counting display values

Full-scale

Count input

Full-scale

Reset

Timer input

Timer display values

Incrementing Operation

(Up)

(Full-scale

−1)

Incrementing Operation

(Up)

Internal clock

timer value

(Full-scale

−0.1

H7E@-N@P

Dimensions

Note: All units are in millimeters unless otherwise indicated.

H7EC-N@P

H7ET-NP

DIP Terminal

DIP terminal x 8

Base

Eight, 0.8 dia.

17.3 max.

PCB Processing Dimensions

(Soldering Surface)

Section occupied

by the Counter

Note: Processing dimensions are

for 28-pin IC socket.

H7E@-N@P

Accessories (Order Separately) (Common)

■New H7E (Except for PCB-mounting Counter)

The New H7E models are supplied with a mounting brack et (Y92F-34) and nut. Additionally, the Y92F-75/-76/-77B Flush Mounting Adapters shown

here allow the New H7E models to be fitted to existing panel cutouts.

Degree of protection (front): IP40 (not waterproof)

The DIP switch of the H7E@-N can be operated in mounted condi-

tion. Vibration resistance and shock resistant are the same level as

the H7E@-N series.

•The minimum mounting interval is 30 mm.

Note: An interval of 40 mm is recommended for easier wiring.

•Do not allow the ambient temperature of the H7E@-N to exceed the

specifications (55°C).

•Mounting is possible onto panels with a thickness of 1 to 5 mm.

RST

47.6 2.4 18.6 4

(48 × No. of units

− 2.5)+1.0

22.2+0.5

45+0.5

30 min.

Y92F-35 Compact Flush Mounting Bracket Panel Cutout

Dense mounting Single mounting

28.8 24.2 22.2

45.2

48.2

53.8

24.8

48.8

RST

24.238 3850 22.2 27.5

48.2

52.5

45.2 4

31 24.2 22.2

45.2

48.2

26 26

45.3

Use mounting bracket supplied with the Counter Panel cutout

Use mounting bracket supplied with the Counter Panel Cutout

Y92F

Flush

Mounting

Adapter

for 26 × 45.3 Rectangular Cutout

Y92F-77B Flush Mounting Adapter

for 24.8 × 48.8 Rectangular Cutout

(Color: light gray)

Two, M4

Panel Cutout

(Color: light gray)

Use the Y92F-76 together with the Y92F-35 Compact

Flush Mounting Bracket.

Do not use the Flush Mounting Adapter supplied with the Counter.

(Color: light gray)

Two 4.5 dia. countersunk holes

Two 3.5 dia. mounting holes

Two, M3

Y92F-76 Flush Mounting Adapter

for 27.5 × 52.5 Rectangular Cutout

Note: The mounting panel

thickness should be

between 1 and 5 mm.

H7E@-N@P

When using the Wire-wrap Terminal, be sure to use the correct wires

and peripheral devices. (The correct wires, bits and sleeves are

shown in the table on the right.)

44.8

48 2548.5 17.1

Y92S-37 Wire-wrap Terminal (Set of Two Terminals) Wire-wrap terminal

(1 × 1 mm)

Wire Bit Sleeve Wrapped state

AWG22 2-A 2-B Normal

AWG24 1-A 1-B Normal

AWG26 3-A 1-B Normal

7.7

Y92S-36 Lithium Battery (3 V)

24.5 dia.

H7E@-N@P

Precautions (Common)

Refer to Safety Precautions for All Counters.

■New H7E (Except for PCB-mounting Counter)

!WARNING

This product has a built-in lithium battery. Do not short-circuit the +

and − terminals, charge, disassemble , deform, or expose the battery

to fire. The battery may explode (break), catch fire, or cause liquid

leakage.

Do not use any battery other than the specified one (Y92S-36). Using

another battery may cause liquid leakage or breakage, resulting in

malfunction or injury.

!CAUTION

If a voltage other than the rated one is applied, internal elements may

be damaged.

Do not use the Counter in the following places:

•Locations subject to direct sunlight.

•Locations subject to corrosive gases.

•Locations subject to dust.

Before Use

•An insulation sheet has been inserted to maintain the quality of t he

Totalizer in the event of a long period without use. Be sure to

remove this sheet before attempting to use the product.

Remove the insulation sheet and press the Reset Key on the front

panel of the Counter. (With the H7ER-N,-NV(-H),-NV1(-H), models,

“0” or “0.0” will be displayed after 1 s.)

•Switch settings on the Counter must be performed before mounting

it to a control panel.

•Do not use the Counter in the following locations:

•Locations subject to severe changes in temperature.

•Locations subject to condensation as the result of high humidity.

Mounting Precautions for Flush

Mounting

Although the operating section is water tight (confor ming to NEMA4,

IP66), rubber packing is provided to avoid water leakage through the

gap between the Counter and panel cutout. Unless this rubber pack-

ing is tightly squeezed on, water may permeate inside the panel.

Therefore, be sure to tighten the screws for fixing the Y92F-34 Flush

Mounting Bracket. (Excessive tightening may also defor m the r ubber

packing.)

Screw for the Flush Mounting Bracket

Reset Input and Count/Timer Input

•The H7E operates using its built-in Battery. If the H7E is conne cted

to a device that has +V and OUT terminals that are connected w ith

a diode as shown in the circuit diagram, the circuit indicated by the

arrow 1 or 2 will be formed when the device is turned OFF. As a

result, the H7E may be reset or count by one. It is recommended

that such devices not be connected to the H7E.

•If an excessive voltage is applied to the count/timer input or reset

input terminals, the internal elements may be damaged.

Ensure that the following voltages are not exceeded:

•PNP/NPN universal voltage input model: 30 VDC

•AC/DC voltage input model:

At count/timer input: 240 VAC (peak voltage: 338V)

240 VDC

At reset input: No voltage can be applied. (No-voltage

input)

•No-voltage input model: No voltage can be applied.

•Avoid wiring close to high-tension or large-current lines.

•Do not remove the outer case when voltage is being applied to the

power supply terminals or the input terminals.

•The input for the H7E@-NFV-@ is a high-impedance circuit and so

influence from an induced voltage may result in malfunction. There-

fore, when the inpu t signal wiring is longer than 10 m (line capaci-

tance of 120 pF/m, at room temperature), it is recommended that a

CR filter or a bleeder resistor is connected.

Reset Key

Insulation Sheet

Y92F-34 Adapter

Panel

The wider side must

face the panel.

H7E@-N

Devices

Internal

circuit

Count/Timer

input or reset

input

H7E@-N@P

Count Input, Timer Input or Reset Input

to More than One H7E Counter at a

Time

•PNP/NPN Universal DC Voltage Input

Note: H (Reset ON) level must be 4.5 V minimum.

•No-voltage Input

Note: 1. The leakage current of the transistor used for input must be

less than 1 µA.

2. The forw ard voltage of the diode must be as low as possib le

(i.e., 0.1 V maximum with an IF of 20 µA) so that the v oltage

between terminals 3 and 4 will be 0.5 V when the reset input

is ON.

Input and Power Supply

No-voltage Input Models

•Do not impose voltage on the Counter if the Counter is a model that

operates with no-voltage input, otherwise the inter nal circuit of the

Counter may be damaged.

Do not connect any single input signal in parallel to Counter models

operating with no-voltage input and those operating with voltage

input, otherwise the Counters may malfunction.

•When connecting a sensor to the Counter that operates with no-

voltage input, make sure that the sensor has open collector output.

•When connecting an open collector input from a transistor to the

Counter that operates with no-voltage input, make sure that the

leakage current of the transistor is 1 µA maximum.

No-v oltage Input and PNP/NPN Universal DC

Voltage Input Models

•The operation of the Counter may be affected if the capacitance of

input lines exceeds 500 pF (about 10 m, with parallel wires of 2 x

2 mm).

Keep all wires as short as possible. When using shielded wire, line

capacitance may occur.

AC/DC Multi-voltage Input Models

•When connecting count/timer input from an SSR to the Counter

that operates with AC/DC voltage input, use OMRON’s G3TA-IA/ID

SSR (for DC) whose leakage current is 0.1 mA max. or connect a

bleeder resistor in parallel to the input circuit of the Counter.

Backlight Power Supply

•To reduce variation in the brightness of the backlight when using

more than one H7E with a backlight, use the same pow er supply f or

all the backlights.

•When connecting the DC power supply for the backlights, be sure

to connect the polarities correctly.

Input Verification with the H7ET Time

Counter

(When the time range is not set to 0s to

999h59min59s)

The decimal point of the LCD blinks every other second while an

input signal is being applied. If the decimal point is not blinking, the

input signal is not being received correctly. Check the input signal

connections.

Unit Label for Time Counter and

Tachometer

A unit label has been packed with the Counter. Use in accordance

with the application.

Battery Replacement

Remove the wir ing when replacing the Batter y. Do not come in con-

tact with any item to which high voltage is being applied. Doing so

may result in electric shock.

Before changing the Battery, the person should ensure that they are

not carrying any static electric charge.

Procedure for replacing the Battery (refer to the diagrams below):

1. Using the tool, pry open the lift-tab on the case. (1)

2. Pull the body out of its outer case. (2)

3. Lift the Battery up by the edge and remove it. (3)

When removing the Batter y, do not come in contact with the dis-

play area or any internal parts.

4. Wipe the back of the new Battery before inserting it.

5. Ensure that the + and – terminals are correctly oriented.

6. After replacing the Battery, re-insert the body into its case. (4)

Check that the case is securely held in by the lift-tab.

H = 4.7 (kΩ)/N + V

4.7 (kΩ)/N + R

12 34

Sensor

Leakage current:

0.1 mA max.

*Bleeder resistor

The voltage between terminals 1 and 2 must be

1.5 V maximum when the SSR is OFF.

H7E@-N@P

7. Press the Reset Key before use (not necessary for H7ER-N,-NV,-

NV1). (5) EN/IEC Standards

The count or timer in put, reset input, and backlight power supply ter-

minals of the no-voltage input or PNP/NPN universal DC voltage

input models (H7E@-N,-N1, H7E@-NV(-H),-NV1(-H)) are not iso-

lated.

A SELV power supply conforming to Appendix H of IEC61010-1

should be used for the count or timer input, reset inpu t and backlight

power supply terminals. A SELV power supply is a power supply for

which the input and output have double or reinforced insulation, and

for which the output voltage is 30 Vrms with 42.4 V peak or 60 VDC

max. (Only the H7E@-NV@-H has a backlight.)

The terminals for count or timer input and reset input for AC/DC

multi-voltage input models have basic insulation.

Connect the reset input terminals to a device that does not have

exposed current-carrying parts and has basic insulation for 240 VAC .

Others

If the indicator keeps flickering or is OFF, the inter nal battery may be

close to the end of its service life. In such a case, it is suggested that

the battery be replaced.

■PCB-mounting Counter

Power Supply

•Use the power supply within the applicable range indicated by the

following waveform, while consider ing the ripple and voltage fluctu-

ations of the circuit power source.

•The H7E@-N@P changes its mode as shown below depending on

the applied supply voltage.

Battery Replacement

To prevent unwanted reset when replacing the battery, connect the

new battery before disconnecting the old one. Otherwise, the voltage

supplied to the counter circuit drops, causing the present count value

to reset.

When designing the circuit board, providing two extra terminals for

batter y connection will make the switch must simpler. See the sche-

matic diagram below:

Wiring polarity must be carefully observed, in order to prevent per-

manent damage to the Counters. Exercise caution when inserting

the Counter in the socket, to prevent reversed polarity.

(2)

(1)

(3)

(4)

(5)

Tool

Battery

3.6 V

2.6 V

Voltage

(V)

3.6

LCD

Beyond supply voltage

Looks darker

Looks normal

Flashes

No display No operation

Normal operation

Approx. 2.6

Approx. 2.2

Internal circuit

operation

Applicable

range

Battery life

guideline

H7E@-N@P

Inputs

Do not route the wiring of the count, timer , or reset inputs in the vicin-

ity of, or in parallel to the wiring of high-voltage or inductive load cir-

cuits (such as motors and relays). Also, keep the wiring as shor t as

possible.

Be careful not to apply voltages e xceeding the f ollowing values to the

count, timer, or reset terminals, otherwise the inter nal circuit may be

damaged.

No-voltage input: 3 VDC

General Information

Finish soldering under the condit ions below.

Solder the terminals within 5 seconds, at a solder iron tip tempera-

ture of 250°C ± 10°C when using lead solder, and within 3 seconds,

at a solder iron tip temperature of 350°C ± 10°C when using lead-

free solder.

Since the Counter is not flux-tight, do not use flux when soldering.

Avoid automatic and dip solderin g. Manually solder the Counter onto

a PC board, and avoid cleaning as much as possible.

When mounting the Counter on a PC board with compone nts which

consume higher current than the H7E@-N@P, observe the following

precautions.

1. Minimize the wiring (less than 50 mm) from the H7E@-N@P to the

power supply section.

2. Avoid placing the H7E@-N@P power, timer , counter, or reset input

circuit in parallel with circuits that consume large currents, partic-

ularly on the positive side.

When using the Counter in an environment where the Counter is

subject to frequent occurrences of vibration or shock, or when

mounting the Counter facing downwards or sideways, it is suggested

that the Counter be directly soldered to a PCB instead of using sock-

ets.

To Conform to EN/IEC Standards

Input ter minals have no insulation from power supply terminals. The

power supply terminals must be supplied from a SELV source in

accordance with IEC61010-1 Annex H. SELV (separated extra-low

voltage) source is a power supply having double or reinforced insula-

tion between the primar y and the secondary circuit and having out-

put voltage of 30 V rms max. and 42.4 V peak max. or 60 VDC max.

Cleaning

To prevent damage, the exter ior of the Counter must not be exposed

to organic solvents (3.g. paint thinner or benzine), strong alkalis, or

strong acids.

Others

•No user-serviceable parts.

•Return to OMRON for all repairs.

H7E@-N@PPower supply Power supply

H7E@-N@P

PC Board (Bad Example) PC Board (Good Example)

Placed far away from

the power supply.

Large-current-

consuming

components

Wired in parallel

with large-

current-carrying

components.

Bypass

capacitor Bypass

capacitor

Large-current-

consuming

components

In the interest of product improvement, specifications are subject to change without notice.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you

have any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron

disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER

ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the

Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at

Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount

equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,

repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products

were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate

modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall

not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or

electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,

recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above

warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself

is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,

system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product

with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence

thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate

it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our

practice to change part numbers when published ratings or features are changed, or when significant construction changes are

made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers

may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at

any time to confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

2015.7

In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation

Industrial Automation Company

http://www.ia.omron.com/