SCOPE: QUAD SPST CMOS ANALOG SWITCHES Device Type 01 02 Generic Number DG201AA(x)/883B DG202A(x)/883B Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows: Outline Letter L K Z Mil-Std-1835 CDFP4-F16 GDIP1-T16 or CDIP2-T16 CQCC1-N20 Case Outline Package Code 16 LEAD FLATPACK F16 16 LEAD CERDIP J16 20-Pin Ceramic LCC L20 Absolute Maximum Ratings Voltage Referenced to VV+ ...................................................................................................................................... 44V GND ................................................................................................................................... 25V Digital Inputs, VS, VD (Note 1) ......................................................... -2V to (V+ +2V)or 20mA, whichever occurs first Current, Any terminal except S or D ............................................................................... 30mA Continuous Current, S or D ............................................................................................. 20mA (Pulsed at 1ms, 10% duty cycle max) ...................................................................... 70mA Lead Temperature (soldering, 10 seconds) ........................................................................ +300C Storage Temperature ........................................................................................... -65C to +150C Continuous Power Dissipation ............................................................................ TA=+70C 16 lead Flatpack (derate 6.1mW/C above +70C) ................................................. 485mW 16 lead CERDIP(derate 10mW/C above +70C) ................................................... 800mW 20-Pin LCC (derate 9.1mW/C above +70C) ........................................................ 727mW Junction Temperature TJ ...................................................................................... +150C Thermal Resistance, Junction to Case, JC: Case Outline 16 lead Flatpack ................................................................. 65C/W Case Outline 16 lead CERDIP.................................................................. 50C/W Case Outline 20-Pin LCC ........................................................................ 20C/W Thermal Resistance, Junction to Ambient, JA: Case Outline 16 lead Flatpack ............................................................... 165C/W Case Outline 16 lead CERDIP................................................................ 100C/W Case Outline 20-Pin LCC ...................................................................... 110C/W Recommended Operating Conditions. Ambient Operating Range (TA) .............................................................. -55C to +125C NOTE 1: Signals on SX, DX, or INX exceeding V+ or V- are clamped by internal diodes, and are also internally current limited to 25mA. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ---------------------------- Electrical Characteristics of DG201A/DG202/883B 19-0041 Page 2 of Rev. C 6 TABLE 1. ELECTRICAL TESTS TEST SWITCH Analog-Signal Range Drain-Source ON Resistance Drain-Source ON Resistance Drain-Source ON Resistance Drain-Source ON Resistance Source OFF Leakage Current Symbol CONDITIONS -55 C <=TA<= +125C V+=+15V, V-=-15V, GND=0V Unless otherwise specified Group A Subgroup Device type Limits Min Limits Max -15 15 Units 1,2,3 All 01 VS =+/-14V, VD=-/+14V, VIN=2.4V 1,3 2 1,3 2 1,3 2 1,3 2 1 2,3 01 -1 -100 175 250 175 250 175 250 175 250 1 100 IS(OFF) VS =+/-14V, VD=-/+14V, VIN=0.8V 1 2,3 02 -1 -100 1 100 nA Drain OFF Leakage Current ID(OFF) VS =+/-14V, VD=-/-14V, VIN=2.4V 1 2,3 01 -1 -100 1 100 nA Drain OFF Leakage Current ID(OFF) VS =+/-14V, VD=-/+14V, VIN=0.8V 1 2,3 02 -1 -100 1 100 nA Drain ON Leakage Current ID(ON) VD=VS=14V, VIN=0.8V 1 2,3 01 -2 -200 2 200 nA Drain ON Leakage Current ID(ON) VD=VS=14V, VIN=2.4V 1 2,3 02 -2 -200 2 200 nA VIN= 2.4V 1,2,3 All -1 VIN=15V 1,3 2 1,3 2 All 1,2 3 1,3 2 All 9 10,11 9 10,11 All VANALOG VS=15V rDS(ON) IS =1mA, VD=10V, VIN=0.8V rDS(ON) IS =1mA, VD=-10V, VIN=0.8V rDS(ON) IS =1mA, VD=10V, VIN=2.4V rDS(ON) IS =1mA, VD=-10V, VIN=2.4V IS(OFF) Source OFF Leakage Current INPUT Input Current/Voltage High IINH Input Current/Voltage Low SUPPLY Positive Supply Current Negative Supply Current DYNAMIC Turn ON time IINL VIN=0V I+ All channels on or off I- All channels on or off tON Figure 1 Turn OFF time tOFF Figure 1 ---------------------------- 01 02 02 All All nA A 1 10 A -1 -10 0.5 1.0 600 1000 450 650 19-0041 Page 3 of mA A -10 -100 All Electrical Characteristics of DG201A/DG202/883B V Rev. C 6 ns ns FIGURE 1: SWITCHING TIME TEST CIRCUIT: See Commercial Data Sheet TRUTH TABLE Device Type 01 01 02 02 Logic 0 1 0 1 ORDERING 01 01 01 02 Information DG201AAK DG201AAL DG201AAZ DG202AK Switch ON OFF OFF ON /883B /883B /883B /883B ---------------------------- TERMINAL CONNECTION TERMINAL DG201A & DG201A & NUMBER DG202 DG202 J16 & F16 L20 1 IN1 NC 2 D1 IN1 3 S1 D1 4 VS1 5 GND V6 S4 NC 7 D4 GND S4 8 IN4 9 IN3 D4 10 D3 IN4 11 S3 NC 12 NC IN3 13 V+ D3 14 S2 S3 15 D2 NC 16 IN2 NC 17 V+ 18 S2 19 D2 20 IN2 Electrical Characteristics of DG201A/DG202/883B 19-0041 Page 4 of Rev. C 6 QUALITY ASSURANCE Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in MilStd-883. Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015: 1. Test Condition, A, B, C, or D. 2. TA = +125C minimum. 3. Interim and final electrical test requirements shall be specified in Table 2. Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B, C, and D inspection. Group A inspection: 1. Tests as specified in Table 2. 2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted. Group C and D inspections: a. End-point electrical parameters shall be specified in Table 1. b. Steady-state life test, Method 1005 of Mil-Std-883: 1. Test condition A, B, C, D. 2. TA = +125C, minimum. 3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883. TABLE 2. ELECTRICAL TEST REQUIREMENTS Mil-Std-883 Test Requirements Interim Electric Parameters Method 5004 Final Electrical Parameters Method 5005 Group A Test Requirements Method 5005 Group C and D End-Point Electrical Parameters Method 5005 * ** Subgroups per Method 5005, Table 1 1 1*, 2, 3, 9 1, 2, 3, 9, 10**, 11** 1 PDA applies to Subgroup 1 only. Subgroups 10 and 11, if not tested shall be guaranteed to the limits of Table 1. ---------------------------- Electrical Characteristics of DG201A/DG202/883B 19-0041 Page 5 of Rev. C 6