Wire Management Products Support Grips Standard Duty Support Offset Eye, Single Weave, Tin-Coated Bronze IMPORTANT! It is important that you read all breaking strength, safety and technical data relating to this product on pages T-43 through T-48. E M Offset Eye, Closed Mesh* For permanent support when cable end is available to be installed through grip. Cable Diameter Range Inches (cm) .50"-.62" (1.27-1.57) .63"-.74" (1.60-1.88) .75"-.99" (1.90-2.51) 1.00"-1.24" (2.54-3.15) 1.25"-1.49" (3.17-3.78) 1.50"-1.74" (3.81-4.42) 1.75"-1.99" (4.44-5.05) 2.00"-2.49" (5.08-6.32) 2.50"-2.99" (6.35-7.59) 3.00"-3.49" (7.62-8.86) 3.50"-3.99" (8.89-10.13) Approx. Breaking Strength Lbs. (N) 500 (2,224) 750 (3,336) 950 (4,226) 1,500 (6,672) 1,500 (6,672) 1,500 (6,672) 2,000 (8,896) 3,100 (13,789) 3,100 (13,789) 3,800 (16,902) 3,800 (16,902) E Inches (cm) 4" (10.16) 4" (10.16) 4" (10.16) 5" (12.70) 5" (12.70) 5" (12.70) 6" (15.24) 9" (22.86) 9" (22.86) 11" (27.94) 11" (27.94) M Inches (cm) 10" (25.40) 10" (25.40) 13" (33.02) 14" (35.56) 15" (38.10) 17" (43.18) 19" (48.26) 21" (53.34) 23" (58.42) 25" (63.50) 27" (68.58) Catalog Numbers 02201037 02201038 02201039 02201041 02201042 02201043 02201044 02201045 02201046 02201047 02201048 M Inches (cm) 10" (25.40) 10" (25.40) 13" (33.02) 14" (35.56) 15" (38.10) 17" (43.18) 19" (48.26) 21" (53.34) 23" (58.42) 25" (63.50) 27" (68.58) Catalog Numbers 02202037 02202038 02202039 02202041 02202042 02202043 02202044 02202045 02202046 02202047 02202048 M Inches (cm) 7" (17.78) 9" (22.86) 10" (25.40) 12" (30.48) 14" (35.56) 15" (38.10) 16" (40.64) 19" (48.26) 20" (50.80) 21" (53.34) 21" (53.34) Catalog Numbers 02203037 02203038 02203039 02203041 02203042 02203043 02203044 02203045 02203046 02203047 02203048 Offset Eye, Split Mesh, Lace Closing* Offset Eye, Closed Mesh E M Offset Eye, Split Mesh, Lace Closing For permanent support when cable end is not available. Cable Diameter Range Inches (cm) .50"-.62" (1.27-1.57) .63"-.74" (1.60-1.88) .75"-.99" (1.90-2.51) 1.00"-1.24" (2.54-3.15) 1.25"-1.49" (3.17-3.78) 1.50"-1.74" (3.81-4.42) 1.75"-1.99" (4.44-5.05) 2.00"-2.49" (5.08-6.32) 2.50"-2.99" (6.35-7.59) 3.00"-3.49" (7.62-8.86) 3.50"-3.99" (8.89-10.13) Approx. Breaking Strength Lbs. (N) 500 (2,224) 750 (3,336) 950 (4,226) 1,500 (6,672) 1,500 (6,672) 1,500 (6,672) 2,000 (8,896) 2,150 (9,563) 2,150 (9,563) 3,800 (16,902) 3,800 (16,902) E Inches (cm) 4" (10.16) 4" (10.16) 4" (10.16) 5" (12.70) 5" (12.70) 5" (12.70) 6" (15.24) 9" (22.86) 9" (22.86) 11" (27.94) 11" (27.94) Offset Eye, Split Mesh, Rod Closing* For support when cable end is not available. E Support Grips M Offset Eye, Split Mesh, Rod Closing Cable Diameter Range Inches (cm) .50"-.62" (1.27-1.57) .63"-.74" (1.60-1.88) .75"-.99" (1.90-2.51) 1.00"-1.24" (2.54-3.15) 1.25"-1.49" (3.17-3.78) 1.50"-1.74" (3.81-4.42) 1.75"-1.99" (4.44-5.05) 2.00"-2.49" (5.08-6.32) 2.50"-2.99" (6.35-7.59) 3.00"-3.49" (7.62-8.86) 3.50"-3.99" (8.89-10.13) E-Eye length Approx. Breaking Strength Lbs. (N) 500 (2,224) 750 (3,336) 950 (4,226) 1,500 (6,672) 1,500 (6,672) 1,500 (6,672) 2,000 (8,896) 3,100 (13,789) 3,100 (13,789) 4,300 (19,126) 4,900 (21,795) E Inches (cm) 4" (10.16) 4" (10.16) 4" (10.16) 5" (12.70) 5" (12.70) 5" (12.70) 6" (15.24) 9" (22.86) 9" (22.86) 11" (27.94) 11" (27.94) M-Mesh length at nominal diameter * Change catalog number from 022 to 024 for stainless steel. Consult factory for availability. T-32 www.hubbell-wiring.com Dimensions in Inches (mm)