RSA3030-TG - RIGOL TECHNOLOGIES

RSA3000

RIGOL TECHNOLOGIES, INC.

Ultra-Real technology

Frequency: up to 4.5 GHz

Displayed average noise level (DANL): <-161 dBm (typical)

Phase noise: <-102 dBc/Hz (typical)

Level measurement uncertainty: <1.0 dB

4.5 GHz tracking generator

Min. RBW 1 Hz

EMC lter and quasi-peak detector kit (optional)

Various measurement functions

Multiple measurement modes

Up to 40 MHz real-time analysis bandwidth

Multiple trigger modes and trigger masks

Density, Spectrogram, and other display modes

PC software options

10.1'' capacitive multi-touch screen; supporting touch gestures

USB, LAN, HDMI and other communication and display interfaces

Real-time Spectrum Analyzer

Series

RIGOL 1

RSA3000 Series Real-time Spectrum Analyzer

Product Dimensions: Width × Height × Depth = 410 mm × 224 mm × 135 mm

The Ultra-Real technology has the following features:

Seamless analysis

◎ Seamless I/Q data acquisition in the analysis bandwidth

◎ Seamless spectrum analysis

FMT

◎ Frequency mask trigger (FMT) to trigger the measurement by sporadic or

transient events in the spectrum

Composite displays

◎ Spectrogram for gap-free display of the spectrum

◎ Density for you to visualize how frequently signals occur

Based on the Ultra-Real technology, the high-speed real-time measurement mode allows you to acquire the signals in the

analysis bandwidth seamlessly and make data analysis. It also provides various display modes, such as Spectrogram,

Density, and PVT. Besides, FMT function is also available.

RIGOL 2

Specications

Measurement Mode

All Measurement Modes

Specications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0℃

to 50℃ temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specications in this manual include the measurement

uncertainty.

Typical: characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25℃). This

data is not warranted and does not include the measurement uncertainty.

Nominal: the expected mean or average performance or a designed attribute (such as the 50 Ω connector). This data is not warranted and is

measured at room temperature (approximately 25℃).

Measured: an attribute measured during the design phase which can be compared to the expected performance, such as the amplitude drift

variation with time. This data is not warranted and is measured at room temperature (approximately 25℃).

NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The specications (except the

tracking generator specications) listed in this manual are those when the tracking generator is off.

Measurement Mode

General-Purpose Spectrum Analyzer (GPSA)

Real-time Spectrum Analyzer (RTSA)

Frequency

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

Frequency Range 9 kHz to 3.0 GHz 9 kHz to 4.5 GHz

Internal Reference Frequency

Reference Frequency 10 MHz

Accuracy ±[(time since last calibration × aging rate) + temperature stability + calibration accuracy]

Initial Calibration

Accuracy

Standard <1 ppm

Option OCXO-C08 <0.1 ppm

Temperature

Stability

0℃ to 50℃, with the reference 25℃

Standard <0.5 ppm

Option OCXO-C08 <0.005 ppm

Aging Rate Standard <1 ppm/year

Option OCXO-C08 <0.03 ppm/year

GPSA Mode

Frequency

Frequency Readout Accuracy

Marker Frequency Resolution span/(number of sweep points - 1)

Marker Frequency Uncertainty ±(marker frequency readout × reference frequency accuracy + 1% × span + 10% ×

resolution bandwidth + marker frequency resolution)

Frequency Counter

Resolution 1 Hz

Uncertainty ±(marker frequency readout × reference frequency accuracy + counter resolution)

Frequency Span

Range Standard 0 Hz, 100 Hz to maximum frequency

Option RSA3000-BW1 0 Hz, 10 Hz to maximum frequency

Resolution 2 Hz

Uncertainty ±span/(number of sweep points - 1)

SSB Phase Noise

20℃ to 30℃，fc = 500 MHz

Carrier Offset

1 kHz <-90 dBc/Hz (typical)

10 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical)

100 kHz <-100 dBc/Hz, <-102 dBc/Hz (typical)

1 MHz <-110 dBc/Hz, <-112 dBc/Hz (typical)

Residual FM

20℃ to 30℃, RBW = VBW = 1 kHz

Residual FM <10 Hz (nominal)

Bandwidth

Set "Sweep Time Rule" to "Accy"

Resolution Bandwidth

(-3 dB)[1]

Standard 10 Hz to 3 MHz, in 1-3-10 sequence

Option RSA3000-BW1 1 Hz to 10 MHz, in 1-3-10 sequence

RBW Accuracy <5% (nominal)

Resolution Filter Shape Factor (60 dB: 3 dB) <5 (nominal)

Video Bandwidth (-3 dB) 1 Hz to 10 MHz, in 1-3-10 sequence

Resolution Bandwidth (-6 dB) (Option RSA3000-

EMC) 200 Hz, 9 kHz, 120 kHz, 1 MHz

Note: [1] When the tracking generator is enabled or in zero span mode, the available range of RBW is from 1 kHz to 10 MHz.

RIGOL 3

Amplitude

Measurement Range

Range fc ≥ 10 MHz

DANL to +30 dBm

Maximum Safe Input Level[1]

DC Voltage 50 V

CW RF Power +30 dBm, attenuation ≥ 40 dB, preamp off.

-10 dBm, attenuation = 20 dB, preamp on.

Maximum Damage Level

CW RF Power +33 dBm (2 W)

Note: [1] When fc < 10 MHz, the maximum safe input level is decreased.

Displayed Average Noise Level (DANL)

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off,

normalized to 1 Hz, 20℃ to 30℃, input impedance = 50 Ω.

Preamp off

9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical)

100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical)

20 MHz to 2.7 GHz <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical)

2.7 GHz to 3.0 GHz <-136 dBm, <-141 dBm (typical) <-136 dBm, <-141 dBm (typical)

3.0 GHz to 4.5 GHz <-136 dBm, <-140 dBm (typical)

Preamp on

100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical)

20 MHz to 2.7 GHz <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical)

2.7 GHz to 3.0 GHz <-156 dBm, <-161 dBm (typical) <-156 dBm, <-161 dBm (typical)

3.0 GHz to 4.5 GHz <-154 dBm, <-159 dBm (typical)

RIGOL 4

Level Display

Logarithmic Scale 1 dB to 200 dB

Linear Scale 0 to reference level

Number of Display Points 801

Number of Traces 6

Trace Detector normal, pos-peak, neg-peak, sample, RMS average, voltage average, and

quasi-peak (Option RSA3000-EMC)

Trace Function clear write, max hold, min hold, average, view, blank

Scale Unit dBm, dBmV, dBμV, nV, μV, mV, V, nW, μW, mW, W

Frequency Response

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

attenuation = 10 dB, relative to 50 MHz, 20℃ to 30℃

Preamp off 100 kHz to 3.0 GHz <0.7 dB, <0.5 dB (typical) <0.7 dB, <0.5 dB (typical)

3.0 GHz to 4.5 GHz <0.9 dB, <0.5 dB (typical)

attenuation = 0 dB, relative to 50 MHz, 20℃ to 30℃

Preamp on 100 kHz to 3.0 GHz <1.0 dB, <0.5 dB (typical) <1.0 dB, <0.5 dB (typical)

3.0 GHz to 4.5 GHz <1.2 dB, <0.5 dB (typical)

RIGOL 5

Input Attenuation Switching Uncertainty

Setting Range 0 dB to 50 dB, in 1 dB step

Switching Uncertainty fc = 50 MHz, relative to 10 dB, preamp off, 20℃ to 30℃

<0.3 dB

Absolute Amplitude Accuracy

Uncertainty

fc = 50 MHz, peak detector, preamp off, attenuation = 10 dB, input signal level = -10 dBm, 20℃ to

30℃

<0.3 dB

Reference Level

Range Logarithmic Scale -170 dBm to +30 dBm, in 0.01 dB step

Linear Scale 707 pV to 7.07 V, 0.11% (0.01 dB) resolution

RBW Switching

Uncertainty

Set "Sweep Time Rule" to "Accy", relative to 30 kHz RBW

1 Hz to 1 MHz <0.1 dB

3 MHz, 10 MHz <0.3 dB

Preamp (Option RSA3000-PA)

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

Frequency Range 100 kHz to 3.0 GHz 100 kHz to 4.5 GHz

Gain 20 dB (nominal)

Level Measurement Uncertainty

95% condence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamp off, attenuation = 10 dB, -50

dBm < input level ≤ 0 dBm, fc > 10 MHz, 20℃ to 30℃

Level Measurement Uncertainty 1.0 dB (nominal)

RIGOL 6

RF Input VSWR

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

attenuation ≥10 dB, preamp off

VSWR 300 kHz to 3.0 GHz <1.6 (nominal) <1.6 (nominal)

3.0 GHz to 4.5 GHz <1.8 (nominal)

Distortion

Second Harmonic Intercept (SHI) fc ≥ 50 MHz, input signal level = -20 dBm, attenuation = 0 dB, preamp off.

+45 dBm

Third-order Intercept (TOI)

fc ≥ 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 0 dB,

preamp off.

+10 dBm, +15 dBm (typical)

1 dB Gain Compression (P1dB)[1] fc ≥ 50 MHz, attenuation = 0 dB, preamp off

0 dBm (norminal)

Note: [1] The frequency interval of the two-tone signals should be greater than 10 MHz.

Spurious Response

Residual Response input terminated with a 50 Ω load, attenuation = 0 dB, 20℃ to 30℃

<-90 dBm, <-100 dBm (typical)

Intermediate Frequency <-60 dBc

System-related Sideband

referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of rst

LO, referenced to harmonic of rst LO

<-60 dBc

Input-related Spurious mixer level = -30 dBm

<-60 dBc

RIGOL 7

Sweep

Sweep Time span ≥ 10 Hz 1 ms to 4,000 s

zero span 1 μs to 6,000 s

Sweep Time

Uncertainty

span ≥ 10 Hz, RBW ≥ 1 kHz 5% (nominal)

zero span (sweep time > 1 ms) 5% (nominal)

Sweep Mode continue, single

Trigger

Trigger Source free run, external 1, external 2, video

Trigger Delay span ≥ 10 Hz 0 to 500 ms

zero span 0 to 500 ms

Tracking Generator

Tracking Generator Output

RSA3030 RSA3030-TG RSA3045 RSA3045-TG

Frequency Range - 100 kHz to 3.0 GHz - 100 kHz to 4.5 GHz

Output Level Range - -40 dBm to 0 dBm - -40 dBm to 0 dBm

Output Level Resolution - 1 dB - 1 dB

Output Flatness relative to 50 MHz

- ±3 dB (nominal) - ±3 dB (nominal)

RIGOL 8

RTSA Mode

Real-time Analysis Bandwidth

10 MHz

25 MHz (Option RSA3000-B25)

40 MHz (Option RSA3000-B40)

Min. Signal Duration for 100% POI at

the Full-Scale Accuracy

maximum span, default Kaiser Window

9.3 μs

7.82 μs (Option RSA3000-B25)

7.45 μs (Option RSA3000-B40)

Trace Detector pos-peak, neg-peak, sample, average

Number of Traces 6

Window Type Hanning, Blackman-Harris, Rectangular, Flattop, Kaiser, and Gaussian

Resolution Bandwidth

provides 6 RBWs for each window, except the Rectangular;

for Kaiser window

Span Min. bandwidth Max. bandwidth

40 MHz 100 kHz 3.21 MHz

25 MHz 62.8 kHz 2.01 MHz

10 MHz 25.1 kHz 804 kHz

1 MHz 2.51 kHz 80.4 kHz

100 kHz 251 Hz 8.04 kHz

Max. Sample Rate 51.2 Msa/s

FFT Rate 146,484/s (norminal)

Number of Markers 8

Amplitude Resolution 0.01 dB

Frequency Point 801

Acquisition Time Max. sample rate

>156.5 μs

Min. Signal Duration for 100% POI at Different RBWs

Duration Time (μs)

Span RBW1 RBW2 RBW3 RBW4 RBW5 RBW6

40 GHz 26.9 16.9 11.9 9.32 8.07 7.45

25 MHz 38.9 22.9 14.9 10.9 8.82 7.82

10 MHz 86.8 46.8 26.8 16.8 11.8 9.30

1 MHz 807 407 207 107 56.3 31.3

Amplitude

Amplitude Flatness <0.5 dB[1] (nominal)

SFDR <-50 dBc/Hz (typical)

Density

Probability Range 0 to 100% (with a step of 0.1%)

Min. Span 5 kHz

Persistence Duration 32 ms to 10 s

Spectrogram

History Depth 8,192

Dynamic Range Covered by Bitmap

Color 200 dB

PVT

Min. Acquisition Time 187.9 μs

Max. Acquisition Time 40 s

Trigger

Trigger Source free run, external 1, external 2, power, FMT

FMT

Trigger Diagram density, spectrogram, normal, PVT

Trigger Resolution 0.5 dB (nominal)

Trigger Criteria enter, leave, inside, outside, enter-leave, leave-enter

Note:[1] Only applicable to the Normal measurement.

RIGOL 9

General Specications

Display

Type capacitive multi-touch screen

Resolution 1024 × 600 pixels

Size 10.1''

Color 24-bit color

Printer Supported

Protocol network printer

Mass Memory

Mass Memory Internal Storage 512 MB (nominal)

External Storage USB storage device (not supplied)

Power

Input Voltage Range, AC 100 V to 240 V (nominal)

AC Frequency 45 Hz to 440 Hz

Power Consumption 55 W (typical), max. 90 W with all options

Environment

Temperature

Operating Temperature

Range 0℃ to 50℃

Storage Temperature

Range -20℃ to 70℃

Humidity 0℃ to 30℃≤95% RH

30℃ to 40℃≤75% RH

Altitude Operating Height below 3,048 m (10,000 feet)

Electromagnetic Compatibility and Safety

EMC

complies with EMC Directive 2014/30/EU,

complies with or above the standard specied in IEC61326-1:2013/EN61326-1:2013 Group 1 Class A

CISPR 11/EN 55011

IEC 61000-4-2:2008/EN

61000-4-2 ±4.0 kV (contact discharge), ±8.0 kV (air discharge)

IEC 61000-4-3:2002/EN

61000-4-3 3V/m (80 MHz to 1 GHz); 3V/m (1.4 GHz to 2 GHz); 1V/m (2.0 GHz to 2.7 GHz)

IEC 61000-4-4:2004/EN

61000-4-4 1 kV power

IEC 61000-4-5:2001/EN

61000-4-5

0.5 kV (phase-to-neutral voltage); 1 kV (phase-to-earth voltage);

1 kV (neutral-to-earth voltage)

IEC 61000-4-6:2003/EN

61000-4-6 3 V, 0.15 to 80 MHz

IEC 61000-4-11:2004/

EN 61000-4-11

voltage dip: 0% UT during half cycle; 0% UT during 1 cycle; 70% UT during 25 cycles

short interruption: 0% UT during 250 cycles

Safety complies with IEC 61010-1:2010 (Third Edition)/EN 61010-1:2010, UL 61010-1:2012

R4.16 and CAN/CSA-C22.2 No. 61010-1-12+ GI1+ GI2

Environmental Stress

Samples of this product have been type tested in accordance with RIGOL's reliability

test regulations and veried to be robust against the environmental stresses of storage,

transportation, and end-use; those stresses include, but are not limited to, temperature,

humidity, shock, and vibration. The test methods are compliant with standards specied in

GB/T6587 Class 2 and MILPRF-28800F Class 3.

Size

(W x H x D) 410 mm × 224 mm × 135 mm

(16.14'' × 8.82'' × 5.32'')

Weight

Without Tracking Generator 4.65 kg (10.25 lb)

With Tracking Generator 4.95 kg (10.91 lb)

Calibration Interval

Recommended Calibration Interval 18 months

RIGOL 10

RIGOL 11

Input/Output

Front Panel Connector

RF Input Impedance 50 Ω (nominal)

Connector N-type female

TG Output Impedance 50 Ω (nominal)

Connector N-type female

Internal/External Reference

Internal Reference

Frequency 10 MHz

Output Level +3 dBm to +10 dBm, +7 dBm (typical)

Impedance 50 Ω (nominal)

Connector BNC female

External Reference

Frequency 10 MHz ± 5 ppm

Input Level 0 dBm to +10 dBm

Impedance 50 Ω (nominal)

Connector BNC female

External Trigger Input/Output

External Trigger Input 1

Impedance ≥1 kΩ (nominal)

Connector BNC female

Level 5 V TTL level

External Trigger Input 2/Trigger Output

Impedance on trigger input ≥1 kΩ (nominal)

on trigger output 50 Ω (nominal)

Connector BNC female

Level 5 V TTL level

IF Output

Frequency 430 MHz ± 20 MHz (nominal)

Amplitude

RF input power (PRFin) ≤ -10 dBm, attenuation = 0,

preamp off.

50MHz, PRFin ± 4 dB (nominal)

other frequency, PRFin ± 4 dB + RF frequency response

(nominal)

Impedance 50 Ω (nominal)

Connector SMB male

Communication Interface

USB Host (4 ports) Connector A plug

Protocol version 2.0

USB Device Connector B plug

Protocol version 2.0

LAN Connector 100/1000Base, RJ-45

Protocol LXI Core 2011 Device

HDMI Connector A plug

Protocol HDMI 1.4b

Three years for the mainframe

Warranty

Order Information

Description Order No.

Model

Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz RSA3030

Real-time Spectrum Analyzer, 9 kHz to 4.5 GHz RSA3045

Real-time Spectrum Analyzer, 9 kHz to 3.0 GHz (with TG installed when leaving the factory) RSA3030-TG

Real-time Spectrum Analyzer, 9 kHz to 4.5 GHz (with TG installed when leaving the factory) RSA3045-TG

Standard

Accessories

Quick Guide (hard copy) -

Power Cord -

Option

Preamplier (PA) RSA3000-PA

High Stability Clock OCXO-C08

RBW 1 Hz to 10 MHz RSA3000-BW1

Real-time Analysis Bandwidth 25 MHz RSA3000-B25

Real-time Analysis Bandwidth 40 MHz RSA3000-B40

Advanced Measurement Kit RSA3000-AMK

EMC Filter and Quasi-Peak Detector Kit RSA3000-EMC

Spectrum Analyzer PC Software Ultra Spectrum

EMI Pre-compliance Test Software S1210 EMI Pre-

compliance Software

Optional

Accessories

Include: N-SMA cable, BNC-BNC cable, N-BNC adaptor, N-SMA adaptor, 75 Ω-50 Ω adaptor,

900 MHz/1.8 GHz antenna (2pcs), 2.4 GHz antenna (2pcs) DSA Utility Kit

Include: N(F)-N(F) adaptor (1pcs), N(M)-N(M) adaptor (1pcs), N(M)-SMA(F) adaptor (2pcs),

N(M)-BNC(F) adaptor (2pcs), SMA(F)-SMA(F) adaptor (1pcs), SMA(M)-SMA(M) adaptor

(1pcs), BNC T type adaptor (1pcs), 50 Ω SMA load (1pcs), 50 Ω BNC impedance adaptor

(1pcs)

RF Adaptor Kit

Include: 50 Ω to 75 Ω adaptor (2pcs) RF CATV Kit

Include: 6 dB attenuator (1pcs), 10 dB attenuator (2pcs) RF Attenuator Kit

30 dB high-power attenuator, with the max power of 100 W ATT03301H

N(M)-N(M) RF Cable CB-NM-NM-75-L-12G

N(M)-SMA(M) RF Cable CB-NM-SMAM-75-L-12G

VSWR Bridge, 1 MHz to 3.2 GHz VB1032

VSWR Bridge, 2 GHz to 8 GHz VB1080

Near-eld Probe NFP-3

Rack Mount Kit RM6041

USB Cable CB-USBA-USBB-FF-150

HEADQUARTER

RIGOL TECHNOLOGIES, INC.

No.8 Keling Road, New District,Suzhou,

JiangSu,P.R.China

Tel:+86-400620002

Email:info@rigol.com

RIGOL® is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to

update without notice. For the latest information about RIGOL's products, applications and services, please contact

local RIGOL ofce or access RIGOL ofcial website: www.rigol.com

1/18