Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 1 LCC600 Series 600 Watts Conduction Mounting Total Power: Input Voltage: U suffix: H suffix: # of Outputs: Main Output: 600 W 90 to 264 Vac 180 to 305 Vac Main and Standby 12/28/36/48 Vdc Special Features * 600 W full power at elevated temperatures * Wide Operating Temperature Range (-40 OC to 85 OC baseplate) * Adjustable Output * Remote Output On/Off * AC_OK; DC_OK Signals * 5V standby Voltage * Active Current Share * Conduction-cooled / Fanless * I2C / PMBusTM * Medical and ITE Safety * Suited for BF Type applications * Active Power Factor Correction * Optional IP65 variant * Optional 277Vac input variant * OR-ing FET Safety * UL+CSA 60950-1 2nd Ed. ANSI ES60601-1 UL8750 * TUV 60950-1 2nd Ed. 60601-1 3rd Ed. EN61347-1 EN61347-2-13 IEC60950-1 IEC60601-1 IEC61347-1 IEC61347-2-13 CCC CSA-C22.2 No.250.13 * CB Scheme * China * CE Mark Product Descriptions LCC600 series are 600W fanless, conduction-cooled, power supplies that accept universal AC input of 90Vac to 264Vac (Safety rating: 100-240 Vac) or 180Vac to 305Vac (Safety rating: 200-277 Vac). Among its key attributes include: - Wide operating temperature range from -40OC to 85OC baseplate temperature; - Higher useable power at elevated operating temperatures; - Fanless; conduction cooling; - IP65 rated enclosure The LCC600 series also carry international approvals encompassing ITE and Medical safeties making it suitable for various applications like outdoor/indoor signage, surveillance; sealed box applications with no airflow; RF antennas; medical clean rooms and High-Rel installations where fan noise, operation or failure is not desirable. Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 2 Model Numbers Model1,2 Input Voltage Output Voltage Adjustment Range Minimum Load Maximum Load Maximum Output Power Typical Efficiency3 Stand-By Supply LCC600-12U-9P 90-264Vac 12.0V 12V-15V 0A 50A 600W 92.3% 5V@1.5A LCC600-12H-9P 180-305Vac 12.0V 12V-15V 0A 50A 600W 92.3% 5V@1.5A LCC600-28U-9P24 90-264Vac 24.0V 24V-30V 0A 25A 600W 93.0% 5V@1.5A LCC600-28U-9P 90-264Vac 28.0V 24V-30V 0A 25A4 600W 93.5% 5V@1.5A LCC600-28H-9P 180-305Vac 28.0V 24V-30V 0A 25A4 600W 93.5% 5V@1.5A LCC600-36U-9P 90-264Vac 36.0V 32V-38V 0A 16.7A 600W 92.0% 5V@1.5A LCC600-36H-9P 180-305Vac 36.0V 32V-38V 0A 16.7A 600W 92.0% 5V@1.5A LCC600-48U-9P 90-264Vac 48.0V 44V-54V 0A 12.5A 600W 93.0% 5V@1.5A LCC600-48H-9P 180-305Vac 48.0V 44V-54V 0A 12.5A 600W 93.0% 5V@1.5A Note 1- Change suffix "-9P" to "-4P" for IP65 rated enclosure with fly lead wires Change suffix "-4P" to "-4PR" for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 VDC) Change suffix "-4P" to "-4PV" to omit control cable (applies to 28, 36, 48 VDC) Note 2- U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only. Note 3- Typical efficiency at high line, factory default voltage and full load. Note 4- When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max). Options None Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 3 Electrical Specifications Absolute Maximum Ratings Stress in excess of those listed in the "Absolute Maximum Ratings" may cause permanent damage to the power supply. These are stress ratings only and functional operation of the unit is not implied at these or any other conditions above those given in the operational sections of this TRN. Exposure to any absolute maximum rated condition for extended periods may adversely affect the power supply's reliability. Table 1. Absolute Maximum Ratings: Parameter Model Symbol Min Typ Max Unit Input Voltage AC continuous operation1 U Suffix H Suffix VIN,AC 90 180 - 264 305 Vac Vac All models PO,max - - 600 W U Suffix - - 4000 1500 1500 Vac Vac Vac H Suffix - - 3000 2000 1500 Vac Vac Vac U Suffix - - 1800 1800 1500 Vac Vac Vac H Suffix - - 2500 2200 1500 Vac Vac Vac Maximum Output Power Isolation Voltage(Qualification) Input to output (2X MOPP) Input to safety ground (1X MOPP) Outputs to safety ground (1X MOPP) Isolation Voltage(Qualification) Input to output Input to safety ground Outputs to safety ground Isolation Voltage(Production) Input to output (2X MOPP) Input to safety ground (1X MOPP) Outputs to safety ground (1X MOPP) Isolation Voltage(Production) Input to output Input to safety ground Outputs to safety ground Baseplate Operating Temperature All models TBASEPLATE -40 - +852 OC Storage Temperature All models TSTG -40 - +85 OC Humidity (non-condensing) Operating Non-operating All models All models 10 10 - 95 95 % % All models All models - - 16,402 50,000 feet feet Altitude Operating Non-operating Note 1 - U suffix - Safety rating: 100-240 Vac. H suffix - Safety rating: 200-277 Vac. Note 2 - With derating up to 95 OC, detail see page 44. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 4 Input Specifications Table 2. Input Specifications: Parameter Operating Input Voltage, AC Operating Input Voltage, DC1 Conditions LCC600-12U LCC600-28U LCC600-36U LCC600-48U LCC600-12H LCC600-28H LCC600-36H LCC600-48H LCC600-12U LCC600-28U LCC600-36U LCC600-48U LCC600-12H LCC600-28H LCC600-36H LCC600-48H Input AC Frequency Maximum Input Current No Load Input Current (VO =On, IO = 0A) All All All Symbol Min Typ Max 90 115/230 264 VIN,AC Vac 180 230/277 305 127 - 374 VIN,DC fIN,AC Vdc 254 - 420 47 50/60 63 4402 - - 10 LCC600-12U LCC600-28U LCC600-36U LCC600-48U VIN,AC = 90Vac LCC600-12H LCC600-28H LCC600-36H LCC600-48H VIN,AC = 180Vac - - 5 LCC600-12U LCC600-28U LCC600-36U LCC600-48U VIN,AC = 90Vac - - 150 LCC600-12H LCC600-28H LCC600-36H LCC600-48H VIN,AC = 180Vac IIN,max Artesyn Embedded Technologies Hz A IIN,no-load Note 1 - DC input rating not part of product's Safety approval. Note 2 - Meets functional parameters. Unit mA - - 250 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 5 Input Specifications Table 2. Input Specifications cont's: Parameter Conditions LCC600-12U LCC600-28U LCC600-36U No Load Input Power LCC600-48U (VO =On, IO = 0A) LCC600-12H LCC600-28H LCC600-36H LCC600-48H Harmonic Line Currents Power Factor Startup Surge Current (Inrush) @ 25OC4 Input Fuse LCC600-12U LCC600-28U LCC600-36U LCC600-48U LCC600-12H LCC600-28H LCC600-36H LCC600-48H Leakage Current to earth ground PFC Switching Frequency Operating Efficiency @ 25OC LCC600-12U LCC600-28U LCC600-36U LCC600-48U LCC600-12H LCC600-28H LCC600-36H LCC600-48H VIN,AC = 90Vac Min Typ Max - - 6.0 PIN,no-load VIN,AC = 180Vac THD IO = IO,max VIN,AC =230Vac f=50/60Hz PF All Unit W - All - 5.0 Per EN61000-3-2 Class A and Class C3 - 0.99 - - - 25 APK - - 12.5 A - - 7 A - 115 387 200 200 500 3500 uA uA uA - 74 - KHz - 92.3 93.5 92.0 93.0 - - 92.3 93.5 92.0 93.0 - All U Suffix: 264Vac,60Hz5 U Suffix: 264Vac,50Hz6 H Suffix: 305Vac All fSW,PFC IO = IO,max VIN,AC =230Vac IO = IO,max VIN,AC =277Vac Note 3 - Meets Class C 50% load. Note 4 - Measured per standard test conditions. Note 5 - Per ANSI/ES60601; 264 Vac split-phase/ 60Hz Note 6 - Per IEC60601; 264 Vac/ 50Hz Artesyn Embedded Technologies Symbol % Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 6 Output Specifications Table 3. Output Specifications: Parameter Factory Set Voltage Output Voltage Adjustment Range Condition Min Typ Max LCC600-12U LCC600-12H 11.94 12.00 12.06 LCC600-28U LCC600-28H 27.86 28.00 28.14 LCC600-36U LCC600-36H VO 36.00 36.18 LCC600-48U LCC600-48H 47.76 48.00 48.24 LCC600-12U LCC600-12H 12.00 12.00 15.00 LCC600-28U LCC600-28H 24.00 28.00 30.00 LCC600-36U LCC600-36H IO = 0A VO Vdc 32.00 36.00 38.00 LCC600-48U LCC600-48H 44.00 48.00 54.00 LCC600-12U LCC600-12H 11.76 12.00 12.24 27.44 28.00 28.56 35.28 36.00 36.72 47.04 48.00 48.96 4.75 5.00 5.25 - - 120 - - 280 - - 360 - - 480 - - 50 0 - 10 Vdc 0 - 100 kOhm LCC600-36U LCC600-36H Inclusive of set-point, temperature change, warm-up drift and dynamic load VO LCC600-48U LCC600-48H All models LCC600-12U LCC600-12H LCC600-28U LCC600-28H Output Ripple, pk-pk Unit Vdc 35.82 LCC600-28U LCC600-28H Output Regulation IO = 50% rated load Symbol LCC600-36U LCC600-36H LCC600-48U LCC600-48H VSB Measure with a 0.1F ceramic capacitor in parallel with a 10F tantalum capacitor, 0 to 20MHz bandwidth At -40 OC, unit needs thermal stabilization time All models Output dimming Artesyn Embedded Technologies VO VSB By external voltage By external resistance - Vdc mVPK-PK Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 7 Output Specifications Table 3. Output Specifications cont's: Parameter Output Current Condition Min Typ Max LCC600-12U LCC600-12H 0 - 50 LCC600-28U LCC600-28H 0 - 21.5 0 - 16.7 0 - 12.5 ISB 0 - 1.5 LCC600-36U LCC600-36H All Symbol IO LCC600-48U LCC600-48H All models Unit A Output Power All P 0 - 6001 W Ripple Switching Frequency All fSW 150 - 300 KHz Main Standby All VO 125 125 - 145 130 %VO,max Main Standby All IO 105 105 - 130 140 %IO,max All TA 90 15 95 33 98 - OC Main Output "ISHARE" connected - - - 5 Units Start up - 0 - 330 mF/A IO,min = 8.5W (15W for 12V) to 25% IO, max change, slew rate = 1A/us %VO Ts - - 3 500 % uSec IO,min = 8.5W (15W for 12V) to 50% IO,max change, slew rate = 1A/us %VO Ts - - 5 500 % uSec 50%IO,max to IO,max change, slew rate = 1A/us %VO Ts - - 3 500 % uSec After thermal equilibrium (30 mins) %VO - - 2 % Over Voltage Protection Over Current Protection Baseplate temperature OTP level Hysteresis Quantity of Units in Parallel Operation VO Load Capacitance Peak Deviation Settling Time VO Dynamic Response Peak Deviation Settling Time Peak Deviation Settling Time VO Long Term Stability Max change over 24 hours Note 1 - Maximum power is limited to 600W. For LCC600-48 when output is adjusted down to 44V, output power is 550W max. For LCC600-36 when output is adjusted down to 32V, output power is 535W max. For LCC600-12 when output is adjusted up to 15V, output power is 525W max. Artesyn Embedded Technologies OC Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 8 Output Specifications Table 4. Output current with the output voltage level from minimum to maximum trimming: Series LCC600-12x-xx LCC600-28x-xx LCC600-36x-xx LCC600-48x-xx Nominal Output Voltage Output Voltage Trimming Range (V) (V) 12 28 36 48 Artesyn Embedded Technologies Iout_max (A) Pout_max (W) 12 50.00 600 13 46.15 600 14 39.30 550 15 35.00 525 24 25.00 600 25 24.00 600 26 23.08 600 27 22.22 600 28 21.42 600 29 20.70 600 30 20.00 600 32 16.70 534 33 16.70 551 34 16.70 568 35 16.70 585 36 16.66 600 37 16.21 600 38 15.78 600 44 12.50 550 45 12.50 563 46 12.50 575 47 12.50 588 48 12.50 600 49 12.25 600 50 12.00 600 51 11.76 600 52 11.53 600 53 11.32 600 54 11.11 600 Lowest Voltage For CC mode application (V) 10.8 21.6 28.8 39.6 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 9 System Timing Specifications Table 5. System Timing Specifications: Label Parameter Min Typ Max Unit - 1500 2500 mSec 200 450 1000 mSec T1 Delay from AC being applied to VO being within regulation T2 Delay from AC being applied to G_ACOK_C signal assertion (going Low) T3 VO rise time, 0V to VO in regulation - 50 100 mSec T4 Delay from VO within regulation to G_DCOK_C signal assertion (going Low) - 200 500 mSec T5 Delay from AC loss to VO falling out of regulation. VO at nominal set point. 20 - - mSec T6 Delay from AC loss to G_ACOK_C signal de-assertion (going High) - 10 15 mSec T7 Delay from G_DCOK_C signal de-assertion (going High) to VO dropping to less than the output lower trimming range 1 9 - mSec T8 Delay from INH_EN going High to VO being within regulation - 112 1500 mSec T9 Delay from INH_EN assertion (Pulled low) to G_DCOK_C signal going High. - 1.2 3 mSec T10 Delay from AC being applied to VSB output being within regulation. - 120 1000 mSec T11 Delay from AC loss to VSB going out of regulation. Last one to turn-off to guarantee other logic & control functionality 100 120 - mSec Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 10 System Timing Specifications Figure 1. System Timing Diagram: Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 11 LCC600-12U-9P Performance Curves Figure 1: LCC600-12U-9P Turn-on delay via AC mains - Vin = 90Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 2: Figure 3: LCC600-12U-9P Hold-up Time - Vin = 90Vac / 63Hz / 0 Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 4: Figure 5: Figure 6: Ch 3: Vo LCC600-12U-9P Output Startup Characteristic - Vin = 90Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 4: G_DCOK_C Artesyn Embedded Technologies LCC600-12U-9P Turn-on delay via INH_EN - Vin = 90Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C LCC600-12U-9P Hold-up Time - Vin = 264Vac / 47Hz / 0 Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Ch 1: Vo LCC600-12U-9P Ripple and Noise Measurement Full Load: Io = 50A (12V), ISB = 1.5A (5V) Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 12 LCC600-12U-9P Performance Curves Figure 7: Ch 1: Vo LCC600-12U-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 230Vac Ch 2: Io Figure 8: LCC600-12U-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 230Vac Ch 2: Io Ch 1: Vo 96 Efficiency (%) 93 90 x 87 84 81 78 75 0 5 10 15 20 25 30 35 40 45 Output current (A) Figure 9: LCC600-12U-9P Turn Off Characteristic via INH_EN Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 10: LCC600-12U-9P Efficiency Curves @ 25 degC 90 Vac 115Vac 230Vac 264Vac Loading: Io = 10% increment to 50A , ISB=1.5A 50 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 13 LCC600-12H-9P Performance Curves Figure 11: LCC600-12H-9P Turn-on delay via AC mains - Vin = 180Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 12: LCC600-12H-9P Turn-on delay via INH_EN - Vin = 180Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 13: LCC600-12H-9P Hold-up Time - Vin = 180Vac / 63Hz / 0 Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 14: LCC600-12H-9P Hold-up Time - Vin = 305Vac / 47Hz / 0 Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 15: LCC600-12H-9P Output Startup Characteristic - Vin = 180Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 16: LCC600-12H-9P Ripple and Noise Measurement - Vin = 180Vac Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 14 LCC600-12H-9P Performance Curves Figure 17: LCC600-12H-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io Figure 18: LCC600-12H-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io 96 Efficiency (%) 93 90 x 87 84 81 78 75 0 5 10 15 20 25 30 35 40 45 Output current(A) Figure 19: LCC600-12H-9P Turn Off Characteristic via INH_EN Full Load: Io = 50A (12V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 20: LCC600-12H-9P Efficiency Curves @ 25 degC 180 Vac 230Vac 277Vac 305Vac Loading: Io = 10% increment to 50A , ISB=1.5A 50 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 15 LCC600-28U-9P Performance Curves Figure 21: LCC600-28U-9P Turn-on delay via AC mains - Vin = 90Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 22: LCC600-28U-9P Turn-on delay via INH_EN - Vin = 90Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 23: LCC600-28U-9P Hold-up Time - Vin = 90Vac / 63Hz / 0 Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 24: LCC600-28U-9P Hold-up Time - Vin = 264Vac / 47Hz / 0 Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 25: LCC600-28U-9P Output Startup Characteristic - Vin = 90Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 26: LCC600-28U-9P Ripple and Noise Measurement - Vin = 90Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 16 LCC600-28U-9P Performance Curves Figure 27: LCC600-28U-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io Figure 28: LCC600-28U-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io 96 Efficiency (%) 93 90 x 87 84 81 78 75 0 2.15 4.3 6.45 8.6 10.75 12.9 15.05 17.2 19.35 21.5 Output current (A) Figure 29: LCC600-28U-9P Turn Off Characteristic via INH_EN Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 30: LCC600-28U-9P Efficiency Curves @ 25 degC 90 Vac 115Vac 230Vac 264Vac Loading: Io = 10% increment to 21.5A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 17 LCC600-28H-9P Performance Curves Figure 31: LCC600-28H-9P Turn-on delay via AC mains - Vin = 180Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 32: LCC600-28H-9P Turn-on delay via INH_EN - Vin = 180Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 33: LCC600-28H-9P Hold-up Time - Vin = 180Vac / 63Hz / 0 Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 34: LCC600-28H-9P Hold-up Time - Vin = 305Vac / 47Hz / 0 Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 35: LCC600-28H-9P Output Startup Characteristic - Vin = 180Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 36: LCC600-28H-9P Ripple and Noise Measurement - Vin = 180Vac Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 18 LCC600-28H-9P Performance Curves Figure 37: LCC600-28H-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io Figure 38: LCC600-28H-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io 96 Efficiency (%) 93 90 x 87 84 81 78 75 0 2.15 4.3 6.45 8.6 10.75 12.9 15.05 17.2 19.35 21.5 Output current(A) Figure 39: LCC600-28H-9P Turn Off Characteristic via INH_EN Full Load: Io = 21.5A (28V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 40: LCC600-28H-9P Efficiency Curves @ 25 degC 180 Vac 230Vac 277Vac 305Vac Loading: Io = 10% increment to 21.5A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 19 LCC600-36U-9P Performance Curves Figure 41: LCC600-36U-9P Turn-on delay via AC mains - Vin = 90Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 42: LCC600-36U-9P Turn-on delay via INH_EN - Vin = 90Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 43: LCC600-36U-9P Hold-up Time - Vin = 90Vac / 63Hz / 0 Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 44: LCC600-36U-9P Hold-up Time - Vin = 264Vac / 47Hz / 0 Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 45: LCC600-36U-9P Output Startup Characteristic - Vin = 90Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 46: LCC600-36U-9P Ripple and Noise Measurement - Vin = 90Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 20 LCC600-36U-9P Performance Curves Figure 47: LCC600-36U-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io Figure 48: LCC600-36U-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io 96 Efficiency (%) 93 90 x 87 84 81 78 75 0 1.67 3.34 5.01 6.68 8.35 10.02 11.69 13.36 15.03 16.7 Output current (A) Figure 49: LCC600-36U-9P Turn Off Characteristic via INH_EN Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 50: LCC600-36U-9P Efficiency Curves @ 25 degC 90 Vac 115Vac 230Vac 264Vac Loading: Io = 10% increment to 16.7A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 21 LCC600-36H-9P Performance Curves Figure 51: LCC600-36H-9P Turn-on delay via AC mains - Vin = 180Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 52: LCC600-36H-9P Turn-on delay via INH_EN - Vin = 180Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 53: LCC600-36H-9P Hold-up Time - Vin = 180Vac / 63Hz / 0 Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 54: LCC600-36H-9P Hold-up Time - Vin = 305Vac / 47Hz / 0 Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 55: LCC600-36H-9P Output Startup Characteristic - Vin = 180Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 56: LCC600-36H-9P Ripple and Noise Measurement - Vin = 180Vac Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 22 LCC600-36H-9P Performance Curves Figure 57: LCC600-36H-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io Figure 58: LCC600-36H-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io 93 Efficiency (%)0 90 x 87 84 81 78 75 0 1.67 3.34 5.01 6.68 8.35 10.02 11.69 13.36 15.03 16.7 Output current(A) Figure 59: LCC600-36H-9P Turn Off Characteristic via INH_EN Full Load: Io = 16.7A (36V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 60: LCC600-36H-9P Efficiency Curves @ 25 degC 180 Vac 230Vac 277Vac 305Vac Loading: Io = 10% increment to 16.7A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 23 LCC600-48U-9P Performance Curves Figure 61: LCC600-48U-9P Turn-on delay via AC mains - Vin = 90Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 62: LCC600-48U-9P Turn-on delay via INH_EN - Vin = 90Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 63: LCC600-48U-9P Hold-up Time - Vin = 90Vac / 63Hz / 0 Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 64: LCC600-48U-9P Hold-up Time - Vin = 264Vac / 47Hz / 0 Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 65: LCC600-48U-9P Output Startup Characteristic - Vin = 90Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 66: LCC600-48U-9P Ripple and Noise Measurement - Vin = 90Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 24 LCC600-48U-9P Performance Curves Figure 67: LCC600-48U-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io Figure 68: LCC600-48U-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 230Vac Ch 1: Vo Ch 2: Io 96 Efficiency (%) 93 90 x 87 84 81 78 75 0.00 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 Output current (A) Figure 69: LCC600-48U-9P Turn Off Characteristic via INH_EN Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 70: LCC600-48U-9P Efficiency Curves @ 25 degC 90 Vac 115Vac 230Vac 264Vac Loading: Io = 10% increment to 12.5A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 25 LCC600-48H-9P Performance Curves Figure 71: LCC600-48H-9P Turn-on delay via AC mains - Vin = 180Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C Figure 72: LCC600-48H-9P Turn-on delay via INH_EN - Vin = 180Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 73: LCC600-48H-9P Hold-up Time - Vin = 180Vac / 63Hz / 0 Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 74: LCC600-48H-9P Hold-up Time - Vin = 305Vac / 47Hz / 0 Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Figure 75: LCC600-48H-9P Output Startup Characteristic - Vin = 180Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 3: Vo Ch 4: G_DCOK_C Figure 76: LCC600-48H-9P Ripple and Noise Measurement - Vin = 180Vac Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: Vo Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 26 LCC600-48H-9P Performance Curves Figure 77: LCC600-48H-9P Transient Response - Vo Deviation (low to high) 50% to 100% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io Figure 78: LCC600-48H-9P Transient Response - Vo Deviation (high to low) 100% to 50% load change, 1A/uS slew rate, Vin = 277Vac Ch 1: Vo Ch 2: Io 93 Efficiency (%)0 90 x 87 84 81 78 75 0.00 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50 Output current(A) Figure 79: LCC600-48H-9P Turn Off Characteristic via INH_EN Full Load: Io = 12.5A (48V), ISB = 1.5A (5V) Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C Artesyn Embedded Technologies Figure 80: LCC600-48H-9P Efficiency Curves @ 25 degC 180 Vac 230Vac 277Vac 305Vac Loading: Io = 10% increment to 12.5A , ISB=1.5A Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 27 Protection Function Specification Input Fusing LCC600 -U suffix module is equipped with an internal non user serviceable 12.5A High Rupturing Capacity (HRC) 250 Vac fuse for fault protection in both the Live and Neutral lines input. LCC600 -H suffix module is equipped with an internal non user serviceable 7A High Rupturing Capacity (HRC) 350 Vac fuse for fault protection in both the Live and Neutral lines input. Over Voltage Protection (OVP) The power supply latches off during output over voltage with the AC line recycled to reset the latch. OVP Parameter Min Nom Max Unit VO Output Overvoltage 125 / 145 % VO VSB Output Overvoltage 125 / 155 % VO Over Current Protection (OCP) LCC600 series includes internal current limit circuitry to prevent damage in the event of overload or short circuit. Recovery is automatic when the overload is removed. No damage will result to the supply as the result of either short term or long term overloads of the output. To be measured under all line and load conditions. In case of continued overload, main output will retry after 20sec. Optional constant current using hardware modification or digital methods is required as part of the design. CC mode supported up to the lowest output trim range. Main Output Response: Output will shutdown and auto recover within a period 20sec. If overload still present after the 20sec time frame, main output will latch and needs AC recycle or inhibit toggling or thru PMbus command to turn unit back on. 5V Standby Response: Output will shutdown and auto recover within a period 20sec. If overload still present after the 20sec time frame, 5Vstandby and main output will latch needs AC recycle. Parameter Min Nom Max Unit VO Output Overcurrent 105 / 130 % IO,max VSB Output Overcurrent 105 / 140 % IO,max Short Circuit Protection (SCP) The LCC600 series will protect itself when any output is shorted to ground or to any other output. The power supply will withstand a continuous short circuit with no permanent damage, applied to its main output during start-up or while running. Over Temperature Protection (OTP) The power supply is internally protected against over temperature conditions. The OTP is auto recovery mode. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 28 Mechanical Specifications Mechanical Outlines "-9P" Suffix Unit: mm Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 29 Mechanical Outlines "-4P" Suffix (12 Vdc) Unit: mm Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 30 Mechanical Outlines "-4P" Suffix (28, 36, 48 Vdc) Unit: mm Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 31 Mechanical Outlines "-4PR" Suffix - Right Angle Cables (28, 36, 48 Vdc) Unit: mm Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 32 Mechanical Outlines "-4PV" Suffix - Signal Cable Removed (28, 36, 48 Vdc) Unit:mm Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 33 Mechanical Outlines Thermal Interface PN: 70-841-031 Unit:mm 3D View Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 34 Mechanical Outlines Extruded Heatsink PN: 466-003103-0000 Unit:mm 3D View Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 35 Connector Definitions L1 G L2 AC Input Connector (-9P) L1 - Line L2 - Neutral G - Ground "-9P" Suffix AC Input Connector (-4P) Brown - Line Blue - Neutral Y/GR - Ground "-4P" Suffix Output Connector (-9P) +Vout - Main Output -Vout - Main Output Return GND - Vout - Vout +Vout +Vout "-9P" Suffix - Vout +Vout Output Connector (-4P) Red - Main Output Black - Main Output Return GND "-4P" Suffix (12Vdc Output) +Vout +Vout - Vout - Vout Artesyn Embedded Technologies "-4P" Suffix (28Vdc,36Vdc,48Vdc Output) Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 36 Table 6. Output Signal Connector Pin Assignment Signals Description Amps per Pin -9P Suffix J1501 Pin Number1 -4P Suffix Wire Color A2_OUT EEPROM Address N/A 1 BLACK GND Ground / Ishare Return N/A 2 BROWN A1_OUT EEPROM Address N/A 3 RED -VOUT_RS Remote Sense Return (Main O/P) N/A 4 ORANGE ISHARE Load share voltage N/A 5 YELLOW A0_OUT EEPROM Address N/A 6 GREEN SDA Serial Data Signal(I2C) N/A 7 BLUE SPARE_1 Spare/Unused Pin N/A 8 VIOLET SCL Serial clock Signal (I2C) N/A 9 GRAY +VOUT_RS Remote Sense (Main O/P) N/A 10 WHITE 5VSB 5V Standby (1.5A Max) 1.5 11 PINK SGND 5V Standby Return 1.5 12 LIGHT BLUE SPARE_2 Spare/Unused Pin N/A 13 WHITE/VIOLET G_DCOK_C Global DC_OK Collector N/A 14 WHITE/YELLOW WP EEPROM Write Protect N/A 15 WHITE/ORANGE G_DCOK_E Global DC_OK Emitter (GND) N/A 16 WHITE/BLACK GND Return GND for O/P Signal and I2C communication N/A 17 WHITE/RED G_ACOK_C Global AC_OK Collector N/A 18 WHITE/BROWN INH_EN Output Inhibit Enable Pin (turns output off) N/A 19 WHITE/GREEN G_ACOK_E Global AC_OK Emitter (GND) 20 WHITE/BLUE N/A Note 1- The signal pin locations of -9P Suffix J1501 connector showing as below: Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 37 Power / Signal Mating Connectors and Pin Types "-9P" Suffix (With Safety Cover / Non IP65 Enclosure) Reference On Power Supply Mating Connector or Equivalent AC Input Connector Part number: 1-350943-0 Manufacturer: TE Connectivity Co., Ltd. Part number: 350766-1 (Housing) Manufacturer: TE Connectivity Co., Ltd. Part number: 350536-1 (Contact terminal) Manufacturer: TE Connectivity Co., Ltd. Or equivalent terminal. J1501 Part number: CI0120P1HD0-LF; Manufacturer: LANDWIN Co., Ltd. Part number: S20B-PHDSS Manufacturer: JST Mfg. Co., Ltd. Part number: PHDR-20VS (Housing) Manufacturer: JST Mfg. Co., Ltd. Part number: SPHD-001T-P0.5 (contact pins) Manufacturer: JST Mfg. Co., Ltd. Or equivalent terminal. Output Power connector 4-position Terminal Block (M4 screw / 10mm pitch with plastic cover); 12kgf-cm Torque Part number: BB-124-08 (19141-0058) Manufacturer: Molex Co., Ltd. Or equivalent ring/spade terminal. "-4P" Suffix (IP65 Enclosure) Reference Designation / Color Wire Type / Size AC Input Live = Brown Neutral = Blue Ground = Y/GR SJTW 18AWGX3C; PVC Jacket; 105 OC/300V +Vout -Vout = Red = Black 6AWG Multi-Strand; PVC Jacket; 105 OC/300V = = = = 14AWGX4C; PVC Jacket; 105 OC/300V 12Vdc Output DC Output +Vout 28Vdc,36Vdc, +Vout 48Vdc Output -Vout -Vout Control Cable Artesyn Embedded Technologies See Table 6 Red Red Black Black 26AWGX20C+AL; PVC Jacket; 105 OC/300V Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 38 Weight The LCC600 series weight as below, For "9P" suffix, weight is 3.59 Ibs / 1.63kg typical. For "4P" suffix, weight is 3.99 lbs / 1.81kg typical. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 39 Environmental Specifications EMC Immunity LCC600 series power supply is designed to meet the following EMC immunity specifications: Table 7. Environmental Specifications: Document Description EN61000-3-2 Harmonics - Meets Class A at full load condition. - Meets Class C from 50% load to full load EN61000-3-3 Voltage Fluctuations (Flicker) IEC/EN 61000-4-2 ESD - +/-8KV contact, Performance criteria A - +/-15kV Air discharge, Performance criteria A IEC/EN 61000-4-3 RF Field Strength Susceptibility - 80~1000MHz, 1000~2700MHz (1kHz sinewave with 80% AM: 10V/m) - Performance Criteria A IEC/EN 61000-4-4 Fast Transient - 0.5kV, 1.0kV, 2.0kV for Power Lines and Protective Earth Terminal - Performance Criteria A IEC/EN 61000-4-5 Surge - Level 3, Criteria A: 2KV CM; 1KV DM for U version - Level 4, Criteria A: 4kV CM; 2kV DM for H version EN61000-4-6 Levels: - 1kHz sine wave with 80% AM: 3V - 6V In ISM bands - 6V In Amateur radio bands Frequency Range: - 0.15-80 (MHz) - 6.7~6.795, 13.553~13.567, 26.957~27.283, 40.66~40.70 (MHz) - 1.8~2.0, 3.5~4.0, 5.3~5.4, 7.0~7.3, 10.10~10.15, 14.0~14.2, 18.07~18.17, 21.0~21.4, 24.89~24.99, 28.0~29.7, 50.0~54.0 (MHz) - Performance Criteria A EN61000-4-8 Power Freq Magnetic - Performance Criteria A, Level 4 for Continuous Field, 30A/m IEC/EN 61000-4-11 Voltage Dips and Interruptions - 30% reduction for 500 mS - Criteria B; - >95% reduction for 10 mS, Criteria A; - >95% reduction for 5000 mS, Criteria C - Hold-up time of 20mS can be met at full load and nominal output voltage Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 40 MIL-STD-461F MIL-STD-461F EMI - For CE101; CE102; CS101; CS114; CS115; CS116 (For U input only) - External EMI filter with P/N ZGLPG-10-02M or ZGLPG-10-02M Type "C" (Zhongguang Hi Tech) required for Mil-STD EMI compliance EN60601-1-2 Medical EMC Standard EN55024:1998 Information Technology Equipment-Immunity Characteristics, Limits and Method of Measurements Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 41 Safety Certifications The LCC600 series power supply is intended for inclusion in other equipment and the installer must ensure that it is in compliance with all the requirements of the end application. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. Table 8. Safety Certifications for LCC600 series power supply system 1 Document File # Description UL60950-1 2nd Edition US and Canada Requirements with UL 60950-1 CSA 22.2 No. 60950-1 Canada Requirements ANSI/AAMI ES60601-1 and EN60601-1, Medical CB report Medical Requirements EN60950-1 Deviations International Requirements CB certificate and Report (All CENELEC Countries) CE CE Mark TUV B 14 09 13890 02104 CHINA CCC Approval 2014010907734253 China Requirements Note1 - U Suffix have both ITE and Medical Safeties. H Suffix carries ITE approval only. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 42 EMI Emissions The LCC600 series has been designed to comply with the Class B limits of EMI requirements of EN55022 (FCC Part 15) and CISPR 22 (EN55022) for emissions and relevant sections of EN61000 (IEC 61000) for immunity. The unit was tested at 600W using resistive load. Conditions is 28V or 48V output, 100%Load, 100Vac input, 60Hz. Conducted Emissions The applicable standard for conducted emissions is EN55022 (FCC Part 15). Conducted noise can appear as both differential mode and common mode noise currents. Differential mode noise is measured between the two input lines, with the major components occurring at the supply fundamental switching frequency and its harmonics. Common mode noise, a contributor to both radiated emissions and input conducted emissions, is measured between the input lines and system ground and can be broadband in nature. The LCC600 series power supplies have internal EMI filters to ensure the convertors' conducted EMI levels comply with EN55022 (FCC Part 15) Class B and EN55022 (CISPR 22) Class B limits. The EMI measurements are performed with resistive loads at maximum rated loading. Sample of EN55022 Conducted EMI Measurement at 100Vac input Note: Red Line refers to Aretsyn Quasi Peak margin, which is 6dB below the CISPR international limit. Blue Line refers to the Artesyn Average margin, which is 6dB below the CISPR international limit. Table 9. Conducted EMI emission specifications of the LCC600 series Parameter Model Symbol Min Typ Max Unit FCC Part 15, class B All Margin - - 6 dB EN 60601-1-2: 2001 All Margin - - 6 dB CISPR 22 (EN55022) class B All Margin - - 6 dB Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 43 Radiated Emissions Unlike conducted EMI, radiated EMI performance in a system environment may differ drastically from that in a stand-alone power supply. The shielding effect provided by the system enclosure may bring the EMI level from Class A to Class B. It is thus recommended that radiated EMI be evaluated in a system environment. The applicable standard is EN55022 Class B (FCC Part 15). Testing ac-dc convertors as a stand-alone component to the exact requirements of EN55022 can be difficult, because the standard calls for 1m leads to be attached to the input and outputs and aligned such as to maximize the disturbance. In such a set-up, it is possible to form a perfect dipole antenna that very few ac-dc convertors could pass. However, the standard also states that the attempt should be made to maximize the disturbance consistent with the typical application by varying the configuration of the test sample. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 44 Operating Temperature The LCC600 series power supplies will start and operate within stated specifications at baseplate temperature from -40 OC to 85OC under all load conditions. The LCC600 series can operate up to a maximum baseplate temperature of 95OC with derating. Power Derating Curves LCC600 series total output power will be derated according to the curve shown below O/P Power vs. Baseplate Temp Output Power [W] 700 600 500 400 300 200 100 0 25 35 45 55 65 Baseplate Temperature 75 85 95 [OC] Base Plate Temperature (deg C) Pout (W) 85 600 95 28 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 45 O/P Power vs. Input Voltage Output Power [Watts] 700 600 500 400 300 200 100 0 90 110 130 150 170 190 210 230 250 270 Input Voltage [Vac] AC Input (Vac) Pout (W) 90-105 550 105-264 600 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 46 Storage and Shipping Temperature / Humidity The LCC600 series power supplies can be stored or shipped at temperatures between -40OC to +85OC and humidity from 10% to 95% non-condensing. Altitude The LCC600 series will operate within specifications at altitudes up to 16,402 feet above sea level. The power supply will not be damaged when stored at altitudes of up to 50,000 feet above sea level. Humidity The LCC600 series will operate within specifications when subjected to a relative humidity from 10% to 90% noncondensing. The LCC600 series can be stored in a relative humidity from 10% to 95% non-condensing. Vibration The LCC600 series power supply will pass the following vibration specifications: Non-Operating Random Vibration Acceleration 1.87 gRMS Frequency Range 10 to 500 Hz Duration 30 mins Direction Three orthogonal axis Frequency(Hz) Slope(db/oct) PSD(g2/Hz) 10 - 0.009 200 -2.66 0.009 500 - 0.004 PSD Profile Operating Random Vibration Acceleration 0.153 gRMS Frequency Range 10 to 500 Hz Duration 30 mins Direction Three orthogonal axis PSD Profile Frequency(Hz) Slope(db/oct) PSD(g2/Hz) 5 11 0.00003 10-50 - 0.0004 100 -10 0.00003 Vibration Testing at Packaging Level Per MIL-STD- 810G 514.5C-1 and 514.5C-15 random vibration exposure. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 47 Shock The LCC600 series power supply will pass the following shock specifications: Non-Operating Half-Sine Shock Acceleration 30 G Duration 18 msec Pulse Half Sine No. of Shock 3X each in both positive and negative directions Operating Half-Sine Shock Per MIL-STD-810F 516.5 Procedure I. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 48 Power and Control Signal Descriptions AC Input Connector This connector supplies the AC Mains to the LCC600 series power supply. L1 - Line G - Ground L2 - Neutral Output Connector - Terminal Block These pins provide the main output for the LCC600 series. The + Main Output (VO) and the Main Output Return pins are the positive and negative rails, respectively, of the VO main output of the LCC600 series power supply. The Main Output (VO) is electrically isolated from the power supply chassis. +Vout -Positive Main Output +Vout -Positive Main Output -Vout -Return GND for Main Output -Vout -Return GND for Main Output Control Signals - J1501 The LCC600 series J1501 contains 20 pins control signal header providing analogy control interface, standby power and I2C interface. A0_Out, A1_Out, A2_Out - (Pin 6, Pin3, Pin1) Please refer to "Communication Bus Descriptions" section. -VOUT_RS, +VOUT_RS - (Pin 4, Pin10) This remote sense circuit is designed to compensate for a power path drop around the entire loop of 0.5V. These pins should be connected as close to the loading as possible, If left open, the remote sense does not work properly and the voltage level of main output will go lower than the guaranteed spec. ISHARE - (Pin 5) / Ishare Return (Pin 2) The main output have active load sharing. The output will share within 10% at full load. All current sharing functions are implemented internal to the power supply by making use of the ISHARE signal. The system connects the ISHARE lines between the power supplies. The supplies must be able to load share with up to 5 power supplies in parallel. The I2C Line should be connected separately when the number of units in parallel is more than 5. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 49 SDA, SCL, GND - (Pin 7, Pin9, Pin17) Please refer to "Communication Bus Descriptions" section. 5VSB, SGND - (Pin11, Pin12) The LCC600 series provides a regulated 5 volt 1.5 amp auxiliary output voltage to power critical circuitry that must remain active regardless of the on/off status of the power supply's main output. The 5V VSB voltage is available whenever a valid AC input voltage is applied to the unit. G_DCOK_C, G_DCOK_E - (Pin14, Pin16) G_DCOK_C is a power good signal and is pulled LOW by the power supply to indicate that both the outputs are above the regulation limits of the power supply. When any output voltage falls below regulation limits or when AC power has been removed for a time sufficiently long so that power supply operation is no longer guaranteed, G_DCOK_C will be deasserted to a HIGH state. Connect 4.7K ohm resistor on G_DCOK_C to PSU's 5V VSB. SGND WP - (Pin15) Write Protect Allows Read/Write operation when connected to GND. When WP pin is connected to 3.3V, the write protection is enabled. G_ACOK_C, G_ACOK_E - (Pin18, Pin20) G-ACOK_C signal is used to indicate presence of AC input to the power supply. A logic "Low" level on this signal will indicate AC input to the power supply is present. A Logic "High" on this signal will indicate a loss of AC input to the power supply. Connect 4.7K ohm resistor on G_ACOK_C to external 5V power supply. SGND Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 50 INH_EN - (Pin19) This signal is required to remotely turn on/off the power supply. When INH_EN is shorted to secondary ground (GND), the PSU main output will turn OFF, otherwise the main output is ON. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 51 Communication Bus Descriptions I2C Bus Signals The LCC600 series power supply contains enhanced monitor and control functions implemented via the I2C bus. The LCC600 I2C functionality (PMBusTM and FRU data) can be accessed via the output connector control signals. The communication bus is powered either by the internal 5V supply or from an external power source connected to the StandBy Output (ie: accessing an unpowered power supply as long as the StandBy Output of another power supply connected in parallel is on). If units are connected in parallel or in redundant mode, the StandBy Outputs must be connected together in the system. Otherwise, the I2C bus will not work properly when a unit is inserted into the system without the AC source connected. Note: PMBusTM functionality can be accessed only when the PSU is powered-up. Guaranteed communication I2C speed is 100KHz. SDA, SCL (I2C Data and Clock Signals) - (pin 7, pin9) I2C serial data and clock bus - these pins are internally pulled up to internal 3.3V supply with a 4.75K resistor and 5Vsb with 4.75K resistor. See internal diagram on Page 51 for details. For robustness, recommended to be pulled up by a resistor Rext. See table on Page 51. A0, A1, A2 (I2C Address BIT 0, BIT1, BIT2 Signals) - (pin6, pin3, pin1) These two input pins are the address lines A0 and A1 to indicate the slot position the power supply occupies in the power bay and define the power supply addresses for FRU data and PMBusTM data communication. This allows the system to assign different addresses for each power supply. During I2C communication between system and power supplies, the system will be the master and power supplies will be slave. They are internally pulled up to internal 3.3V supply with a 2.2K resistor. I2C Bus Communication Interval The interval between two consecutive I2C communications to the power supply should be at least 50ms to ensure proper monitoring functionality. I2C Bus Signal Integrity The noise on the I2C bus (SDA, SCL lines) due to the power supply will be less than 450mV peak-to-peak. This noise measurement should be made with an oscilloscope bandwidth limited to 100MHz. The noise on the address lines A0, A1 and A2 will be less than 450mV peak-to-peak. This noise measurement should be made at the power supply output connector. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 52 I2C Bus Internal Implementation, Pull-ups and Bus Capacitances 4.75K 4.75K 2.21K 2.21K 1K 4.75K 4.75K 2.21K POWER SUPPLY SIDE 3.3V Supply 5V Supply 1K SYSTEM Side A0 100 A0 A1 100 A1 A2 100 A2 SDA 100 SCL 100 PSU Monitor Function SDA 2.7V Z-Diode SCL PSU Micro Controller Schottky Diode GND Interconnect FRU DATA EEPROM I2C Bus - Recommended external pull-ups: Electrical and Interface specifications of I2C signals (referenced to StandBy Output Return pin, unless otherwise indicated): Parameter Symbol Min Typ Max Unit SDA, SCL internal pull-up resistor Rint - 2.85 - Kohm SDA, SCL recommended external bus capacitance Cext Recommended external pull-up resistor Artesyn Embedded Technologies Condition 1 to 5 PSU Rext 53 0.75 - pF 2.2 Kohm Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 53 Logic Levels LCC600 series power supply I2C Communication Bus will respond to logic levels as per below: Logic High: 5V Nominal (Specs is 2.1V to 5.5V)** Logic Low: 500mV nominal (Specs is 800mV max)** ** Note: Artesyn 73-769-001 I2C adapter was used. Timings Parameter Symbol Standard-Mode Specs Actual Measured Unit 100 260 KHz 4.0 - 4.736 uS tLOW 4.7 - 14.868 uS tHIGH 4.0 - 4.352 uS Setup time for repeated START condition tSU;STA 4.7 - 5.566 uS Data hold time tHD;DAT 0 3.45 0.408 uS Data setup time tSU;DAT 250 - 921.2 nS Rise time tr - 1000 SCL = 512 SDA = 560 nS Fall time tf - 300 SCL = 172 SDA = 126 nS tSU;STO 4.0 - 4.282 uS tBUF 4.7 - 95*** mS Min Max fSCL 0 tHD;STA LOW period of SCL clock HIGH period of SCL clock SCL Clock Frequency Hold time (repeated) START condition Setup time for STOP condition Bus free time between a STOP and START condition *** Note Artesyn 73-769-001 I2C adapter (USB-to-I2C) and Universal PMBusTM GUI software was used Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 54 Device Addressing The LCC600 series will respond to supported commands on the I2C PMBusTM that are addressed according to pins A2,A1 and A0 pins of output connector. Address pins are held HIGH by default via pulled up to internal 3.3V supply with a 2.2K resistor. To set the address as "0", the corresponding address line should be pulled down to logic ground level. Below table show the address of the power supply with A0 and A1 and A2 pins set to either "0" or "1": PSU Slot Slot ID Bits PMBusTM Address EEPROM (FRU) Address A2 A1 A0 1 0 0 0 B0 A0 2 0 0 1 B2 A2 3 0 1 0 B4 A4 4 0 1 1 B6 A6 5 1 0 0 B8 A8 6 1 0 1 BA AA 7 1 1 0 BC AC 8 1 1 1 BE* AE * Default PMBusTM address when A0 and A1 and A2 are left open Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 55 FRU (EEPROM) Data The FRU (Field Replaceable Unit) data format compliant with the Intel IPMI v1.0 specification. The LCC600 series uses 1 page of EEPROM for FRU purpose. A page of EEPROM contains up to 256 byte-sized data locations. Where: OFFSET - The OFFSET denotes the address in decimal format of a particular data byte within LCC600 series P EEPROM. VALUE - The VALUE details data written to a particular memory location of the EEPROM. DEFINITION - The contents DEFINITION refers to the definition of a particular data byte. LCC600-12U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 8 08 0 00 209 D1 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 56 LCC600-12U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-12U-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "1"=31h 49 31 60 3C "2"=32h 50 32 61 3D "U"=55h 85 55 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 57 LCC600-12U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "L477" 81 51 "L" = 4Ch 76 4C 82 52 "4"= 34h 52 34 83 53 "7"= 37h 55 37 84 54 "7"= 37h 55 37 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 65 41 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 92 5C "A" 65 41 93 5D "P" = 50h, (For Laguna, Philippines) MANUFACTURING LOCATION 90 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 12H to 67h) (PER UNIT) Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 58 LCC600-12U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (90V / 10mV) 9000 = 2312H, 2 Bytes Sequence 40 35 28 23 117 118 75 76 High End Input Voltage Range 1(10mV) (264V/10mV) 26400= 6720H, 2 Bytes Sequence 32 103 20 67 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage 2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Applicable 0 00 0 00 0 00 0 00 131 83 132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 133 85 Record Type ID (0x01 = DC Output) 1 01 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D 12V DC OUTPUT RECORD HEADER Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 59 LCC600-12U-9P FRU (EEPROM) Data: OFFSET DEFINITION (REMARKS) SPEC VALUE (DEC) (HEX) (DEC) 136 88 Record Checksum (Zero Checksum From 138d To 150d ) 163 (HEX) A3 137 89 Header Checksum (Zero Checksum From 133d To 136d ) 77 4D 138 8A Output Information, 001 = 01H, +12V Output Information 1 01 139 8B 176 B0 140 8C Nominal Voltage 12.00V = 1200 (x10mV) = 04B0H 4 04 141 8D 176 B0 142 8E Maximum Negative Voltage Deviation 12.00V = 1200 (x10mV) = 04B0H, 2 Bytes Sequence 4 04 143 8F DC 90 Maximum Positive Voltage Deviation 15V = 1500 (x10mV) = 05DCH, 2 Bytes Sequence 220 144 5 05 145 91 120 78 146 92 Ripple and Noise pk-pk (mV) 120mV (x 1mV)= 0078H, 2 Bytes Sequence 0 00 147 93 0 00 148 94 0 00 149 95 136 88 150 96 19 13 151 152 153 154 97 98 99 9A 1 2 13 214 01 02 0D D6 155 9B 26 1A 156 9C 130 82 157 9D F4 9E Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 158 1 01 159 9F 219 DB 160 A0 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 1 01 161 A1 13 0D 162 A2 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 2 02 163 A3 50 32 164 A4 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 0 00 165 A5 0 00 166 A6 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 167 A7 168 A8 12V OUTPUT RECORD Minimum Current Draw (10mA), 0000 = 0000H, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 50.0A = 5000 (x10mA) = 1388H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 60 LCC600-12U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 61 LCC600-12H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 0 00 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 209 D1 CHASSIS INFO AREA( 32 BYTES) 8 08 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 62 LCC600-12H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-12H-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "1"=31h 49 31 60 3C "2"=32h 50 32 61 3D "H"=55h 85 48 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 63 LCC600-12H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "L480" 81 51 "L" = 4Ch 76 4C 82 52 "4"= 34h 52 34 83 53 "8"= 38h 55 38 84 54 "0"= 30h 56 30 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 50h, (For Laguna, Philippines) MANUFACTURING LOCATION 90 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 12H to 67h) (PER UNIT) 157 9D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 64 LCC600-12H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 2 02 113 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (180V / 10mV) 18000 = 4650H, 2 Bytes Sequence 80 70 50 46 117 118 75 76 High End Input Voltage Range 1(10mV), (305V/10mV) 30500= 7724H, 2 Bytes Sequence 36 119 24 77 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 131 83 132 84 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Applicable 0 00 0 00 0 00 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00 1 01 12V DC OUTPUT RECORD HEADER 133 85 Record Type ID (0x01 = DC Output) 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 65 LCC600-12H-9P FRU (EEPROM) Data: OFFSET DEFINITION (REMARKS) SPEC VALUE (DEC) (HEX) (DEC) 136 88 Record Checksum (Zero Checksum From 138d To 150d ) 163 (HEX) A3 137 89 Header Checksum (Zero Checksum From 133d To 136d ) 77 4D 138 8A Output Information, 001 = 01H, +12V Output Information 1 01 139 8B 176 B0 140 8C Nominal Voltage 12.00V = 1200 (x10mV) = 04B0H 4 04 141 8D 176 B0 142 8E Maximum Negative Voltage Deviation 12.00V = 1200 (x10mV) = 04B0H, 2 Bytes Sequence 4 04 143 8F DC 90 Maximum Positive Voltage Deviation 15V = 1500 (x10mV) = 05DCH, 2 Bytes Sequence 220 144 5 05 145 91 120 78 146 92 Ripple and Noise pk-pk (mV) 120mV (x 1mV)= 0078H, 2 Bytes Sequence 0 00 147 93 0 00 148 94 0 00 149 95 136 88 150 96 19 13 151 152 153 154 97 98 99 9A 1 2 13 214 01 02 0D D6 155 9B 26 1A 156 9C 130 82 157 9D F4 9E Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 158 1 01 159 9F 219 DB 160 A0 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 1 01 161 A1 13 0D 162 A2 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 2 02 163 A3 50 32 164 A4 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 0 00 165 A5 0 00 166 A6 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 167 A7 168 A8 12V OUTPUT RECORD Minimum Current Draw (10mA), 0000 = 0000H, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 50.0A = 5000 (x10mA) = 1388H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 66 LCC600-12H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 67 LCC600-28U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 0 00 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 209 D1 8 08 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 68 LCC600-28U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-28U-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "2"=32h 50 32 60 3C "8"=38h 56 38 61 3D "U"=55h 85 55 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 69 LCC600-28U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "K618" 81 51 "K"= 4Bh 75 4B 82 52 "6"= 36h 54 36 83 53 "1"= 31h 49 31 84 54 "8"= 38h 56 38 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 5AH, (For Zhongshan, China) MANUFACTURING LOCATION (PER UNIT) 90 5A 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 70 LCC600-28U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (90V / 10mV) 9000 = 2328H, 2 Bytes Sequence 40 35 28 23 117 118 75 76 High End Input Voltage Range 1(10mV) (264V/10mV) 26400= 6720H, 2 Bytes Sequence 32 103 20 67 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Appllicable 0 00 0 00 0 00 0 00 131 83 132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 133 85 Record Type ID (0x01 = DC Output) 1 01 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D 28V DC OUTPUT RECORD HEADER Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 71 LCC600-28U-9P FRU (EEPROM) Data: OFFSET DEFINITION (REMARKS) SPEC VALUE (DEC) (HEX) (DEC) 136 88 Record Checksum (Zero Checksum From 138d To 150d ) 243 (HEX) F3 137 89 Header Checksum (Zero Checksum From 133d To 136d ) 253 FD 138 8A Output Information, 001 = 01H, +28V Output Information 1 01 139 8B 240 F0 140 8C Nominal Voltage 28.00V = 2800 (x10mV) = 0AF0H 10 0A 141 8D 96 60 142 8E Maximum Negative Voltage Deviation 24.00V = 2400 (x10mV) = 0960H, 2 Bytes Sequence 9 09 143 8F B8 90 Maximum Positive Voltage Deviation 30.00V = 3000 (x10mV) = 1518H, 2 Bytes Sequence 184 144 11 0B 145 91 24 18 146 92 Ripple and Noise pk-pk (mV) 280mV (x 1mV)= 0118H, 2 Bytes Sequence 1 01 147 93 0 00 148 94 Minimum Current Draw (10mA), 0000 = 0000H, 2 Bytes Sequence 0 00 149 95 196 C4 150 96 9 09 151 152 153 154 97 98 99 9A 1 2 13 214 01 02 0D D6 155 9B 26 1A 156 9C 130 82 157 9D F4 9E Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 158 1 01 159 9F 219 DB 160 A0 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 1 01 161 A1 13 0D 162 A2 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 2 02 163 A3 50 32 164 A4 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 0 00 165 A5 0 00 166 A6 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 167 A7 168 A8 28V OUTPUT RECORD Minimum Current Draw (10mA), 0000 = 0000H 25A = 2500(x10mA) = 09C4H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 72 LCC600-28U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5V VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 73 LCC600-28H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 0 00 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 209 D1 CHASSIS INFO AREA( 32 BYTES) 8 08 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 74 LCC600-28H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-28H-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "2"=32h 50 32 60 3C "8"=38h 56 38 61 3D "H"=48h 72 48 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 75 LCC600-28H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "K620" 81 51 "K"= 4Bh 75 4B 82 52 "6"= 36h 56 36 83 53 "2"= 32h 57 32 84 54 "0"= 30h 53 30 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 5AH, (For Zhongshan, China) MANUFACTURING LOCATION (PER UNIT) 90 5A 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 157 9D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 76 LCC600-28H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 2 02 113 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (180V / 10mV) 18000 = 4650H, 2 Bytes Sequence 80 70 50 46 117 118 75 76 High End Input Voltage Range 1(10mV), (305V/10mV) 30500= 7724H, 2 Bytes Sequence 36 119 24 77 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 131 83 132 84 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Appllicable 0 00 0 00 0 00 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00 1 01 28V DC OUTPUT RECORD HEADER 133 85 Record Type ID (0x01 = DC Output) 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 77 LCC600-28H-9P FRU (EEPROM) Data: OFFSET DEFINITION (REMARKS) SPEC VALUE (DEC) (HEX) (DEC) 136 88 Record Checksum (Zero Checksum From 138d To 150d ) 243 (HEX) F3 137 89 Header Checksum (Zero Checksum From 133d To 136d ) 253 FD 138 8A Output Information, 001 = 01H, +28V Output Information 1 01 139 8B 240 F0 140 8C Nominal Voltage 28.00V = 2800 (x10mV) = 0AF0H 10 0A 141 8D 96 60 142 8E Maximum Negative Voltage Deviation 24.00V = 2400 (x10mV) = 0960H, 2 Bytes Sequence 9 09 143 8F B8 90 Maximum Positive Voltage Deviation 30.00V = 3000 (x10mV) = 0BB8H, 2 Bytes Sequence 184 144 11 0B 145 91 24 18 146 92 Ripple and Noise pk-pk (mV) 280mV (x 1mV)= 0118H, 2 Bytes Sequence 1 01 147 93 0 00 148 94 Minimum Current Draw (10mA) 0000 = 0000H, 2 Bytes Sequence 0 00 149 95 196 C4 150 96 9 09 151 152 153 154 97 98 99 9A 1 2 13 214 01 02 0D D6 155 9B 26 1A 156 9C 130 82 157 9D F4 9E Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 158 1 01 159 9F 219 DB 160 A0 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 1 01 161 A1 13 0D 162 A2 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 2 02 163 A3 50 32 164 A4 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 0 00 165 A5 0 00 166 A6 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 167 A7 168 A8 28V OUTPUT RECORD Minimum Current Draw (10mA), 0000 = 0000H 25A = 2500(x10mA) = 09C4H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 78 LCC600-28H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5V VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 79 LCC600-36U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 8 08 0 00 209 D1 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 80 LCC600-36U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-36U-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "3"=33h 52 33 60 3C "6"=36h 56 36 61 3D "U"=55h 85 55 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 81 LCC600-36U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "L292" 81 51 "L"= 4Bh 75 4C 82 52 "2"= 38h 56 32 83 53 "9"= 39h 57 39 84 54 "2"= 35h 53 32 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 82 LCC600-36U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (90V / 10mV) 9000 = 2328H, 2 Bytes Sequence 40 35 28 23 117 118 75 76 High End Input Voltage Range 1(10mV) (264V / 10mV) 26400= 6720H, 2 Bytes Sequence 32 103 20 67 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 131 83 132 84 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Applicable 0 00 0 00 0 00 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00 48V DC OUTPUT RECORD HEADER 133 85 Record Type ID (0x01 = DC Output) 1 01 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 83 LCC600-36U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) 136 88 137 (REMARKS) SPEC VALUE (DEC) (HEX) Record Checksum (Zero Checksum From 138d To 150d ) 122 7A 89 Header Checksum (Zero Checksum From 133d To 136d ) 118 76 138 8A Output Information, 001 = 01H, +36V Output Information 1 01 139 8B 16 10 140 8C Nominal Voltage 36.00V = 3600 (x10mV) = 0E10H 14 0E 141 8D 142 8E 143 8F 144 90 145 91 146 92 147 93 148 94 149 95 150 96 151 152 153 154 97 98 99 9A 155 9B 156 9C 157 9D 158 9E 159 9F 160 A0 161 A1 162 A2 163 A3 164 A4 165 A5 166 A6 167 A7 168 A8 36V OUTPUT RECORD Maximum Negative Voltage Deviation 32.00V = 3200 (x10mV) = 0C80H, 2 Bytes Sequence 128 80 12 0C Maximum Positive Voltage Deviation 38.00V = 3800 (x10mV) = 0ED8H, 2 Bytes Sequence 216 D8 14 0E Ripple and Noise pk-pk (mV) 360mV = 0168H, 2 Bytes Sequence 104 68 1 01 0 0 0 0 134 86 6 06 1 2 13 214 01 02 0D D6 26 1A 130 82 Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 F4 1 01 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 219 DB 1 01 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 13 0D 2 02 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 50 32 0 00 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 0 0A Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 16.7A = 1670 (x10mA) = 0686H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 84 LCC600-36U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 85 LCC600-36H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 8 08 0 00 209 D1 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 86 LCC600-36H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-36H-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "3"=33h 52 33 60 3C "6"=36h 56 36 61 3D "H"=36H 72 48 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 87 LCC600-36H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "L293" 81 51 "L" = 4Ch 75 4C 82 52 "2" = 32h 56 32 83 53 "9" = 39h 57 39 84 54 "3" = 33h 55 33 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 58 3A Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 88 LCC600-36H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (180V / 10mV) 18000 = 4650H, 2 Bytes Sequence 80 70 50 46 117 118 75 76 High End Input Voltage Range 1(10mV), (305V/10mV) 30500= 7724H, 2 Bytes Sequence 36 119 24 77 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Auto switch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 128 80 129 81 130 82 131 83 132 84 88 58 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Applicable 0 00 0 00 0 00 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00 1 01 48V DC OUTPUT RECORD HEADER 133 85 Record Type ID (0x01 = DC Output) 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 89 LCC600-36H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) 136 88 137 (REMARKS) SPEC VALUE (DEC) (HEX) Record Checksum (Zero Checksum From 138d To 150d ) 122 7A 89 Header Checksum (Zero Checksum From 133d To 136d ) 118 76 138 8A Output Information, 001 = 01H, +36V Output Information 1 01 139 8B 16 10 140 8C Nominal Voltage 36.00V = 3600 (x10mV) = 0E10H 14 0E 141 8D 142 8E 143 8F 144 90 145 91 146 92 147 93 148 94 149 95 150 96 151 152 153 154 97 98 99 9A 155 9B 156 9C 157 9D 158 9E 159 9F 160 A0 161 A1 162 A2 163 A3 164 A4 165 A5 166 A6 167 A7 168 A8 36V OUTPUT RECORD Maximum Negative Voltage Deviation 32.00V = 3200 (x10mV) = 0C80H, 2 Bytes Sequence 128 80 12 0C Maximum Positive Voltage Deviation 38.00V = 3800 (x10mV) = 0ED8H, 2 Bytes Sequence 216 D8 14 0E Ripple and Noise pk-pk (mV) 360mV = 0168H, 2 Bytes Sequence 104 68 1 01 0 0 0 0 134 86 6 06 1 2 13 214 01 02 0D D6 26 1A 130 82 Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 F4 1 01 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 219 DB 1 01 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 13 0D 2 02 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 50 32 0 00 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 0 00 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 16.7A = 1670 (x10mA) = 0686H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 90 LCC600-36H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5V VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 91 LCC600-48U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 8 08 0 00 209 D1 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 92 LCC600-48U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-48U-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "4"=34h 52 34 60 3C "8"=38h 56 38 61 3D "U"=55h 85 55 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 93 LCC600-48U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "K895" 81 51 "K"= 4Bh 75 4B 82 52 "8"= 38h 56 38 83 53 "9"= 39h 57 39 84 54 "5"= 35h 53 35 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 94 LCC600-48U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (90V / 10mV) 9000 = 2328H, 2 Bytes Sequence 40 35 28 23 117 118 75 76 High End Input Voltage Range 1(10mV) (264V/10mV) 26400= 6720H, 2 Bytes Sequence 32 103 20 67 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F 88 58 128 80 Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 129 81 130 82 131 83 132 84 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Appllicable 0 00 0 00 0 00 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00 1 01 48V DC OUTPUT RECORD HEADER 133 85 Record Type ID (0x01 = DC Output) 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 95 LCC600-48U-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) 136 88 137 (REMARKS) SPEC VALUE (DEC) (HEX) Record Checksum (Zero Checksum From 138d To 150d ) 248 F8 89 Header Checksum (Zero Checksum From 133d To 136d ) 248 F8 138 8A Output Information, 001 = 01H, +48V Output Information 1 01 139 8B 192 C0 140 8C Nominal Voltage 48.00V = 4800 (x10mV) = 12C0H 18 12 141 8D 48 30 142 8E Maximum Negative Voltage Deviation 44.00V = 4400 (x10mV) = 1130H, 2 Bytes Sequence 17 11 143 8F 18 90 Maximum Positive Voltage Deviation 54.00V = 5400 (x10mV) = 1518H, 2 Bytes Sequence 24 144 21 15 145 91 224 E0 146 92 Ripple and Noise pk-pk (mV) 480mV (x 1mV)= 01E0H, 2 Bytes Sequence 147 93 148 94 149 95 150 96 151 152 153 154 97 98 99 9A 155 9B 156 9C 157 9D 158 9E 159 9F 160 A0 161 A1 162 A2 163 A3 164 A4 165 A5 166 A6 167 A7 168 A8 48V OUTPUT RECORD 1 01 0 0A 0 00 226 E2 4 04 1 2 13 214 01 02 0D D6 26 1A 130 82 Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 F4 1 01 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 219 DB 1 01 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 13 0D 2 02 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 50 32 0 00 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 0 0A Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 12.50A = 1250(x10mA) = 04E2H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 96 LCC600-48U-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5V VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 97 LCC600-48H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) COMMON HEADER, 8 BYTES 0 00 FORMAT VERSION NUMBER (Common Header) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 1 01 INTERNAL USE AREA OFFSET 27 1B 2 02 CHASSIS INFO AREA OFFSET 1 01 3 03 BOARD INFO AREA OFFSET 0 00 4 04 PRODUCT INFO AREA OFFSET 5 05 5 05 MULTI RECORD AREA OFFSET 13 0D 6 06 PAD (reserved) Default value is 0. 7 07 ZERO CHECK SUM (256 - (Sum of bytes 0 to 6)) 8 08 0 00 209 D1 FORMAT VERSION NUMBER 7:4 - Reserved, write as 0000b 3:0 - Format Version Number = 1h for this specification 1 01 04 CHASSIS INFO AREA( 32 BYTES) 9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 10 0A CHASSIS TYPE (Default value is 0.) 0 00 11 0B CHASSIS PART NUMBER Type/Length CAh (if used) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 193 C1 12 13 14 15 16 17 18 19 20 21 0C 0D 0E 0F 10 11 12 13 14 15 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 22 16 Reserved 0 00 23 24 25 26 27 28 29 30 17 18 19 1A 1B 1C 1D 1E Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 98 LCC600-48H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 31 32 33 34 35 36 37 38 1F 20 21 22 23 24 25 26 Reserved Reserved Reserved Reserved Reserved Reserved Reserved END TAG 39 27 ZERO CHECK SUM (256 - (Sum of bytes offset 8h to 26h)) SPEC VALUE (DEC) (HEX) 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 58 3A 1 01 PRODUCT INFORMATION AREA 28 FORMAT VERSION NUMBER (Product Info Area) 7:4 - Reserved, write as 0000b 3:0 - Format Version Number =1h for this specification 41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08 42 2A Language (English) 25 19 43 2B MANUFACTURER NAME TYPE / LENGTH 7:6 - (11)b, 8-Bit ASCII + Latin 1, 5:0 - (000111)b, 7-Byte Allocation 199 C7 40 MANUFACTURER'S NAME 7 byte sequence "ARTESYN" 44 2C "A" = 41h 65 41 45 2D "R" = 52h 82 52 46 2E "T" = 54h 84 54 47 2F "E" = 45h 69 45 48 30 "S" = 53h 83 53 49 31 "Y" = 59h 89 59 50 32 "N" = 4Eh 78 4E 51 33 PRODUCT NAME Type/Length (CDh) Type = "ASCII+LATIN1" = (11)b; Length = 13 Bytes = (001101)b 206 CE PRODUCT NAME BYTES (14 Byte sequence) "LCC600-48H-9P" 52 34 "L"=4Ch 76 4C 53 35 "C"=43h 67 43 54 36 "C"=43h 67 43 55 37 "6"=36h 54 36 56 38 "0"=30h 48 30 57 39 "0"=30h 48 30 58 3A "-"=2Dh 45 2D 59 3B "4"=34h 52 34 60 3C "8"=38h 56 38 61 3D "H"=48h 72 48 62 3E "-"=2Dh 45 2D 63 3F "9"=39h 57 39 64 40 "P"=50h 80 50 65 41 Space=20h 32 20 Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 99 LCC600-48H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) (REMARKS) 66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah) Type = "ASCII+LATIN1" = (11)b Length = 10 Bytes = (001010)b 67 68 69 70 71 72 73 74 75 76 43 44 45 46 47 48 49 4A 4B 4C Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved 77 4D PRODUCT VERSION NUMBER Type/Length (C2h) Type = "ASCII+LATIN1" = (11)b Length = 2 bytes = (000010)b SPEC VALUE (DEC) (HEX) 202 CA 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 194 C2 PRODUCT VERSION NUMBER BYTES Refer to BOM TLA for latest revision 78 4E "A" 65 41 79 4F "A" 65 41 50 PRODUCT SERIAL NUMBER Type/Length Type = "ASCII+LATIN1" = (11)b Length = 13 bytes = (001101)b 205 CD 80 PRODUCT SERIAL NUMBER BYTES Model ID = "K897" 81 51 "K"= 4Bh 75 4B 82 52 "8"= 38h 56 38 83 53 "9"= 39h 57 39 84 54 "7"= 37h 55 37 MANUFACTURING YEAR AND WEEK CODE (PER UNIT) 85 55 "W" 87 57 86 56 "W" 87 57 57 58 59 5A UNIQUE SERIAL NUMBER (PER UNIT) "SSSS" In Decimal = 083, 083, 083, 083 In Hex = 53H, 53H, 53H, 53H 83 83 83 83 53 53 53 53 41 87 88 89 90 MODEL REVISION (PER UNIT) Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision 91 5B "A" 65 92 5C "A" 65 41 93 5D "P" = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50 94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1 95 5F Reserved 0 00 96 60 Reserved 0 00 97 61 Reserved 0 00 98 62 Reserved 0 00 99 63 Reserved 0 00 100 64 Reserved 0 00 101 65 Reserved 0 00 102 66 Reserved 0 00 103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 58 3A Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 100 LCC600-48H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (REMARKS) (HEX) SPEC VALUE (DEC) (HEX) 0 00 02 MULTI RECORD AREA 68 Power Supply Record Header (72 Bytes) Record Type ID (0x00 = Power Supply Information) 105 69 3-0: (0010)b, Record Format Version 2 106 6A Record Length: 24 Bytes 24 18 107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5 108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21 104 POWER SUPPLY RECORD 109 6D 110 6E Overall Capacity of the Power Supply, 15-12: (0000)b, Reserved 11-0: (000111001000)b, 600W = 0258H 88 58 2 02 111 6F 138 8A 70 15-12: (0000)b, Reserved 11-0: (001000011100)b, 650W = 028AH 112 113 2 02 71 Inrush Current (Amps) 25 19 114 72 Inrush Interval, 200mS 200 C8 115 116 73 74 Low End Input Voltage Range 1(10mV) (180V / 10mV) 18000 = 4650H, 2 Bytes Sequence 80 70 50 46 117 118 75 76 High End Input Voltage Range 1(10mV), (305V/10mV) 30500= 7724H, 2 Bytes Sequence 36 119 24 77 119 120 77 78 Low End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 121 122 79 7A High End Input Voltage Range 2(10mV) Not Applicable (Autoswitch) 0 0 00 00 123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F 124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F 125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14 126 7E 38 26 127 7F Binary Flags, 15-11: (10100)b, Hold up Time in Seconds = 14H 10-0: (01001011000)b, Peak Capacity in Watts =258H 128 80 129 81 130 82 88 58 162 A2 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2 Byte 2 and Byte 3: Total Combined Wattage Stored with LSB first then MSB. Not Appllicable 0 00 0 00 0 00 0 00 131 83 132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 133 85 Record Type ID (0x01 = DC Output) 1 01 134 86 End Of List/Record Format Version Number 2 02 135 87 Record Length: 13 Bytes 13 0D 48V DC OUTPUT RECORD HEADER Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 101 LCC600-48H-9P FRU (EEPROM) Data: OFFSET DEFINITION (DEC) (HEX) 136 88 137 (REMARKS) SPEC VALUE (DEC) (HEX) Record Checksum (Zero Checksum From 138d To 150d ) 248 F8 89 Header Checksum (Zero Checksum From 133d To 136d ) 248 F8 138 8A Output Information, 001 = 01H, +48V Output Information 1 01 139 8B 192 C0 140 8C Nominal Voltage 48.00V = 4800 (x10mV) = 12C0H 18 12 141 8D 48 30 142 8E Maximum Negative Voltage Deviation 44.00V = 4400 (x10mV) = 1130H, 2 Bytes Sequence 17 11 143 8F 18 90 Maximum Positive Voltage Deviation 54.00V = 5400 (x10mV) = 1518H, 2 Bytes Sequence 24 144 21 15 145 91 224 E0 146 92 Ripple and Noise pk-pk (mV) 480mV (x 1mV)= 01E0H, 2 Bytes Sequence 147 93 148 94 149 95 150 96 151 152 153 154 97 98 99 9A 155 9B 156 9C 157 9D 158 9E 159 9F 160 A0 161 A1 162 A2 163 A3 164 A4 165 A5 166 A6 167 A7 168 A8 48V OUTPUT RECORD 1 01 0 00 0 00 226 E2 4 04 1 2 13 214 01 02 0D D6 26 1A 130 82 Nominal Voltage 5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence 244 F4 1 01 Maximum Negative Voltage Deviation 4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence 219 DB 1 01 Maximum Positive Voltage Deviation 5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence 13 0D 2 02 Ripple And Noise pk-pk (mV) 50mV = 0032H, 2 Bytes Sequence 50 32 0 00 Minimum Current Draw (10mA) 0000 = 000AH, 2 Bytes Sequence 0 00 Minimum Current Draw (10mA) 0000 = 0000H, 2 Bytes Sequence Minimum Current Draw (10mA), 0000 = 0000H 12.50A = 1250(x10mA) = 04E2H 5VSB OUTPUT RECORD HEADER Record type ID (0x01 = DC Output) End of List /Record Format Version Number for 5VSB Output Record Record Length: 13 Bytes Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM) (256-(sum of bytes 156 to 168) Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM) (256-(sum of bytes 151 to 154) Output Information, 002 = 02H Bit 7: Standby Information = 1B Bits 6-4: Reserved, Write as 000B Bits 3-0: Output Number 2 = 010B Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H 0150 = 0096H, 2 Bytes Sequence Artesyn Embedded Technologies 0 00 150 96 0 00 Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 102 LCC600-48H-9P FRU (EEPROM) Data: OFFSET (DEC) DEFINITION (HEX) (REMARKS) SPEC VALUE (DEC) (HEX) OEM RECORD HEADER 169 170 A9 AA Record type = C0H for OEM Record End of List /Record Format Version Number for 5V VSB output Record 192 130 C0 82 171 172 173 AB AC AD Record Length of OEM Record Record CHECKSUM of OEM Record (Zero CHECKSUM) Header CHECKSUM of OEM Record Header (Zero CHECKSUM) (256-(sum of bytes 169 to 172) 42 0 148 2A 00 94 174 AE Manufacturer ID (3 bytes, Default is 0) 0 00 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 AF B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF D0 D1 D2 D3 D4 D5 D6 D7 RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED RESERVED 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 OEM RECORD Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 103 PMBusTM Interface Support The LCC600 series is compliant with the industry standard PMBusTM protocol for monitoring and control of the power supply via the I2C interface port. LCC600 Series PMBusTM General Instructions Equipment Setup The following is typical I2C communication setup: Voltmeter I2C Master LCC600 Series I2C Adaptor AC Source PMBusTM Writing Instructions When writing to any PMBusTM R/W registers, ALWAYS do the following: Disable Write Protect (command 10h) by writing any of the following accordingly: Levels: 00h - Enable writing to all writeable commends 20h - Disables write except 10h, 01h, 00h, 02h and 21h commands 40h - Disables write except 10h, 01h, and 00h commends 80h - Disable write except 0x00h . Artesyn Embedded Technologies E-Load Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 104 LCC600 series Support PMBusTM Command List The LCC600 series is compliant with the industry standard PMBusTM protocol for monitoring and control of the power supply via the I2C interface port. LCC600 series Supported PMBusTM Command List: Command Code Command Name Default Value Access Type1 Data Bytes Data Format Description 00h PAGE 00h R 1 Hex 01h OPERATION 80h R/W 1 Bitmap ped b7:6 7 - Unit ON 6 - Soft Off 10b 00 - INVALID INPUT 01 - PSU OFF 10 - PSU ON (Default) 11 - INVALID INPUT b5:4 5 - Margin High 4 - Margin Low 00b 00 - VALID INPUT (Default) b3:2 3 - Margin Act on Fault 2 - Margin Ignore Fault 00b 00 - VALID INPUT (Default) b1:0 Reserved 00b 00 - VALID INPUT (Default) ON_OFF_CONFIG 1Eh b7:5 00b 02h R 1 Bitmap ped Used to turn the unit ON/OFF in conjunction with the input CONTROL pin. Configures the combination of CONTROL pin and serial communication commands needed to turn the unit ON/OFF. Default b4 - Control pin and Serial communication control 1 1 - Unit powers up as dictated by CONTROL pin and OPERATION command b3 - Serial communication Control 1 1 - Enables Serial communication ON/OFF portion of OPERATION command. Requires CONTROL pin to be asserted for the unit to start and energize the output. b2 - Control pin 1 1 - Unit requires CONTROL pin to be asserted to start the unit. b1 - Control pin polarity 0 1 - Active high (Pull high to start the unit). b0 - Control pin action 0 0 - Use programmed turn ON/OFF delay 03h CLEAR_FAULTS N/A S 1 N/A 10h WRITE_PROTECT 80h R/W 1 Bitmap ped 20h VOUT_MODE 17h R 1 N/A 21h VOUT_COMMAND 0000 R/W 2 Note 1 - Access Type: "S": Send Byte. "R": Read. "W": Write. "R/W": Read/Write Artesyn Embedded Technologies Used to Control Writing to the PMBus Device 80h - Disables write except 10h 40h - Disables write except 10h, 01h, 00h 20h - Disables write except 10h,01h,00h,02h and 21h commands 00 - Enables write to all writeable commands. Specifies the mode and parameters of Output Voltage related Data Formats Linear "Sets the Output Voltage Reference Vout (VOUT) command sends discreet value to change output voltage" Note: that setpoint will not work once vout command is set. To enablle setpoint again write 0 value. LCC600-12 Default: 12V Min: 12V Max: 15V LCC600-28 Default: 28V Min: 24V Max: 30V LCC600-36 Default: 36V Min: 32V Max: 38V LCC600-48 Default: 48V Min: 44V Max: 54V Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 105 LCC600 series Supported PMBusTM Command List: Command Code Command Name Default Value (HEX) Access Type Data Bytes Data Format Description 35h VIN_ON EAB8 R 2 Linear Sets the value of input, in volts, at which the unit should start. AC GOOD LCC600-12U Default: 87Vac LCC600-12H Default: 175Vac LCC600-28U Default: 87Vac LCC600-28H Default: 175Vac LCC600-36U Default: 87Vac LCC600-36H Default: 175Vac LCC600-48U Default: 87Vac LCC600-48H Default: 175Vac 36h VIN_OFF EA88 R 2 Linear Sets the value of input, in volts, at which the unit should stop power conversion. AC BAD LCC600-12U Default: 81Vac LCC600-12H Default: 165Vac LCC600-28U Default: 81Vac LCC600-28H Default: 165Vac LCC600-36U Default: 81Vac LCC600-36H Default: 165Vac LCC600-48U Default: 81Vac LCC600-48H Default: 165Vac 40h VOUT_OV_FAULT_LIMIT 7A00 R 2 Linear LCC600-12 Default: 15.6V, 128%-132% of output Voltage LCC600-28 Default: 36.4V, 128%-132% of output Voltage LCC600-36 Default: 47V, 128%-132% of output Voltage LCC600-48 Default: 61V, 125%-129% of output Voltage 42h VOUT_OV_WARN_LIMIT 7200 R 2 Linear LCC600-12 Voltage LCC600-28 Voltage LCC600-36 Voltage LCC600-48 Voltage Default: 13V, 108%-112% of output LCC600-12 Voltage LCC600-28 Voltage LCC600-36 Voltage LCC600-48 Voltage Default: 10V, 80%-84% of output LCC600-12 Voltage LCC600-28 Voltage LCC600-36 Voltage LCC600-48 Voltage Default: 9V, 73%-77% of output 43h 44h 46h VOUT_UV_WARN_LIMIT VOUT_UV_FAULT_LIMIT IOUT_OC_FAULT_LIMIT Artesyn Embedded Technologies 5600 500A DB40 R R R 2 2 2 Linear Linear Linear Default: 31V, 108%-112% of output Default: 40V, 108%-112% of output Default: 57V, 116%-120% of output Default: 23V, 80%-84% of output Default: 30V, 80%-84% of output Default: 43V, 87%-91% of output Default: 21V, 73%-77% of output Default: 27V, 73%-77% of output Default: 40V, 81%-85% of output LCC600-12 Default: 60A, output Voltage LCC600-28 Default: 26A, output Voltage LCC600-36 Default: 20A, output Voltage LCC600-48 Default: 14.5A, output Voltage 119%-123% of 119%-123% of 119%-123% of 114%-118% of Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 106 LCC600 series Supported PMBusTM Command List: Command Code Command Name Default Value (HEX) Access Type Data Bytes Data Format Description 4Ah IOUT_OC_WARN_LIMIT DAE0 R 2 Linear LCC600-12 Default: 53.5A, 105%-109% of rated output current LCC600-28 Default: 23A, 105%-109% of rated output current LCC600-36 Default: 18A, 105%-109% of rated output current LCC600-48 Default: 13.5A, 106%-110% of rated output current 4Fh OT_FAULT_LIMIT EAB8 R 2 Linear Secondary ambient temperature Fault threshold, in degree C. (87degC) 51h OT_WARN_LIMIT EAB0 R 2 Linear Secondary ambient temperature warning threshold, in degree C. Operating limit. refer to section 3.1. (86degC) 58h VIN_UV_WARN_LIMIT EAB0 R/W 2 Linear LCC600-12U Default: 86Vac LCC600-12H Default: 175Vac LCC600-28U Default: 86Vac LCC600-28H Default: 175Vac LCC600-36U Default: 86Vac LCC600-36H Default: 175Vac LCC600-48U Default: 86Vac LCC600-48H Default: 175Vac 59h VIN_UV_FAULT_LIMIT EA88 R 2 Linear LCC600-12U Default: 81Vac LCC600-12H Default: 170Vac LCC600-28U Default: 81Vac LCC600-28H Default: 170Vac LCC600-36U Default: 81Vac LCC600-36H Default: 170Vac LCC600-48U Default: 81Vac LCC600-48H Default: 170Vac 6Ah POUT_OP_WARN_LIMIT 0262 R 2 Linear Default 78h STATUS_BYTE 00 R 1 Bitmap ped PMBUs status bits that are supported in the different status registers b7 - BUSY Not support b6 - OFF Unit is OFF b5 - VOUT_OV Output over-voltage fault has occurred b4 - IOUT_OC Output over-current fault has occurred b3 - VIN_UV An input under--voltage fault has occurred b2 - TEMPERATURE A temperature fault or warning has occurred b1 - CML A communication, memory or logic fault has occurred. b0 - NONE OF THE ABOVE 79h STATUS_WORD Not support 0000 R 2 Bitmap ped PMBUs status bits that are supported in the different status registers b15 - VOUT An output voltage fault or warning has occurred b14 - IOUT/POUT An Output current or power fault or warning has occurred. b13 - INPUT An input voltage, current or power fault or warning as occurred. b12 - MFR Not support b11 - POWER_GOOD# The POWER_GOOD signal is de-asserted b10 - FANS Not support b9 - OTHER Not support Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 107 LCC600 series Supported PMBusTM Command List: Command Code 79h Command Name Default Value (HEX) Access Type Data Bytes Data Format b8 - UKNOWN Not support b7 - BUSY Not support b6 - OFF Unit is OFF b5 - VOUT_OV Output over-voltage fault has occurred b4 - IOUT_OC Output over-current fault has occurred b3 - VIN_UV An input under-voltage fault has occurred b2 - TEMPERATURE A temperature fault or warning has occurred b1 - CML A communication, memory or logic fault has occurred. b0 - NONE_OF_THE_ABOVE 7Ah STATUS_VOUT Not support 00 R/W 1 Bitmap ped VOUT Over--voltage Fault b6 - VOUT_OV_LV_FAULT VOUT Over-voltage warning b5 - VOUT_UV_WARNING VOUT Under-voltage Warning b4 - VOUT_UV_FAULT VOUT Under-voltage Fault b3 - VOUT_MAX Warning Not support b2 - TON_MAX_FAULT TON_MAX_FAULT b1 - TOFF_MAX_WARNING Not support STATUS_IOUT Not support 00 R/W 1 Bitmap ped b7 - IOUT_OC_FAULT 7Dh Output current related faults IOUT Over current Fault b6 - IOUT_OC_LV_FAULT Not support b5 - IOUT_OC_WARNING IOUT Overcurrent Warning b4 - IOUT_UC_FAULT Not support b3 - Current Share Fault Not support b2 - In Power Limiting Mode Not support b1 - POUT_OP_FAULT Not support b0 - POUT_OP_WARNING 7Ch Output voltage related faults b7 - VOUT_OV_FAULT b0 - VOUT Tracking Error 7Bh Description STATUS_INPUT POUT Overpower Warning 00 R/W 1 Bitmap ped Input related faults and warnings b7 - VIN_OV_FAULT VIN Overvoltage Fault b6 - VIN_OV_WARNING VIN Overvoltge Warning b5 - VIN_UV_WARNING VIN Undervoltage Warning b4 - VIN_UV_FAULT VIN Undervoltage Fault b3 - Unit Off For Insufficient Input Voltage Absence of or no input condition (not UV) b2 - IIN_OC_FAULT Not support b1 - IIN_OC_WARNING Not support b0 - PIN_OP_WARNING Not support STATUS_TEMPERATURE 00 R/W 1 Bitmap ped Temperature related faults and warnings b7 - OT_FAULT Overtemperature Fault b6 - OT_WARNING Overtemperature Warning b5 - UT_WARNING Not support b4 - UT_FAULT Not support b3 : 0 Not support Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 108 LCC600 series Supported PMBusTM Command List: Command Code 7Eh Command Name Default Value (HEX) Access Type Data Bytes Data Format 00 R/W 1 Bitmap ped STATUS_CML Description Communications, Logic and Memory b7 - Invalid Or Unsupported Command Received The following conditions shall also assert this flag: - A write transaction on read only commands - A write transaction on a password protected command that is still locked b6 - Invalid Or Unsupported Data Received Packet Error Check Failed b5 - Packet Error Check Failed Memory Fault Detect, CRC Error b4 - Memory Fault Detected [1] Memory Fault Detect, CRC Error b3 - Processor Fault Detected [2] Not support b2 - Reserved Not support b1 - A communication fault other than the ones listed in this table has occurred Not support b0 - Other Memory Or Logic Fault has occurred. [3] Not support 80h STATUS_MFR_SPECIFIC 00 R/W 1 Bitmap ped Manufacturer Status codes 88h 8Bh READ_VIN - R 2 Linear Returns input Voltage in Volts ac. READ_VOUT - R 2 Linear Returns the actual, measured voltage in Volts. 8Ch READ_IOUT - R 2 Linear Returns the output current in amperes. 8Dh1 READ_TEMPERATURE1 (SEC_AMB) - R 2 Linear Secondary Hotspot 8Eh2 READ_TEMPERATURE2 (SEC_AMB) - R 2 Linear Primary Hotspot 8Fh3 READ_TEMPERATURE3 (SEC_AMB) - R 2 Linear Primary Hotspot 96h READ_POUT - R 2 Linear Returns the output power, in Watts. 98h PMBUS_REVISION 22h R 1 Linear Reads the PMBus revision number 99h MFR_ID 4E,59,53,45,54,5 2,41,7 R 7 ASCII ARTESYN 9Ah MFR_MODEL 4C,43,43,36,30,3 0,2D,32,38,55,2D ,39,50,20 R/W 14 ASCII Default Value: "LCC600-12U-4P" "LCC600-12H-4P" "LCC600-28U-4P" "LCC600-28H-4P" "LCC600-36U-4P" "LCC600-36H-4P" "LCC600-48U-4P" "LCC600-48H-4P" - R 2 ASCII Default: Default value should be BOM TLA (can be found on serial number). - R 11 ASCII Default: "Philippines" 9Bh MFR_REVISION 9Ch MFR_LOCATION OC. Note 1 - 8Dh: Maximum allowed temperature is 111 And cold temperature read out limitation is -10 OC. Note 2 - 8Eh: Maximum allowed temperature is 124 OC. And cold temperature read out limitation is -10 OC. Note 3 - 8Fh: Maximum allowed temperature is 101 OC. And cold temperature read out limitation is -10 OC. Artesyn Embedded Technologies "LCC600-12U-9P" "LCC600-12H-9P" "LCC600-28U-9P" "LCC600-28H-9P" "LCC600-36U-9P" "LCC600-36H-9P" "LCC600-48U-9P" "LCC600-48H-9P" Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 109 LCC600 series Supported PMBusTM Command List: Command Code Command Name Default Value (HEX) Access Type Data Bytes Data Format Description 9Dh MFR_DATE - R/W 6 ASCII Manufacture Date, ASCII format structure : YYMMDD 9Eh MFR_SERIAL - R/W Varies ASCII LCC600-12U-9P LCC600-12U-4P LCC600-12H-9P LCC600-12H-4P LCC600-28U-9P LCC600-28U-4P LCC600-28H-9P LCC600-28H-4P LCC600-36U-9P LCC600-36U-4P LCC600-36H-9P LCC600-36H-4P LCC600-48U-9P LCC600-48U-4P LCC600-48U-9P LCC600-48U-4P A0h MFR_VIN_MIN EAD0 R 2 Linear Minimum Input Voltage LCC600-12U Default: 90Vac LCC600-12H Default: 180Vac LCC600-28U Default: 90Vac LCC600-28H Default: 180Vac LCC600-36U Default: 90Vac LCC600-36H Default: 180Vac LCC600-48U Default: 90Vac LCC600-48H Default: 180Vac A1h MFR_VIN_MAX FA10 R 2 Linear Maximum Input Voltage LCC600-12U Default: 264Vac LCC600-12H Default: 305Vac LCC600-28U Default: 264Vac LCC600-28H Default: 305Vac LCC600-36U Default: 264Vac LCC600-36H Default: 305Vac LCC600-48U Default: 264Vac LCC600-48H Default: 305Vac A2h MFR_IIN_MAX D20 R 2 Linear Maximum Input Current (8A) A3h MFR_PIN_MAX 294 R 2 Linear Maximum Input Power (660W) A4h MFR_VOUT_MIN 300 R 2 Linear Minimum Output Voltage LCC600-12 Default: 12V LCC600-28 Default: 24V LCC600-36 Default: 32V LCC600-48 Default: 44V A5h MFR_VOUT_MAX 3C0 R 2 Linear Maximum Output Voltage LCC600-12 Default: 15V LCC600-28 Default: 30V LCC600-36 Default: 38V LCC600-48 Default: 54V A6h MFR_IOUT_MAX DB20 R 2 Linear Maximum Output Current LCC600-12 Default: 50A LCC600-28 Default: 21.5A LCC600-36 Default: 16.7A LCC600-48 Default: 12.5A A7h MFR_POUT_MAX 258 R 2 Linear Maximum Output Power (600W) Artesyn Embedded Technologies Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default Default "L477WWSSSSAAP" "L478WWSSSSAAP" "L479WWSSSSAAP" "L480WWSSSSAAP" "K618WWSSSSAAP" "K619WWSSSSAAP" "K620WWSSSSAAP" "K621WWSSSSAAP" "L291WWSSSSAAP" "L292WWSSSSAAP" "L293WWSSSSAAP" "L295WWSSSSAAP" "K895WWSSSSAAP" "K896WWSSSSAAP" "K897WWSSSSAAP" "K898WWSSSSAAP" Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 110 LCC600 series Supported PMBusTM Command List: Command Code Command Name Default Value (HEX) Access Type Data Bytes Data Format Description A8h MFR_TAMBIENT_MAX E320 R 2 Linear Maximum Operating Ambient Temperature (Secondary Ambient) (50 degC) A9h MFR_TAMBIENT_MIN DD80 R 2 Linear Minimum Operating Ambient Temperature (Secondary Ambient) (-20 degC) AAh MFR_EFFICIENCY_LL - R 14 Linear ABh MFR_EFFICIENCY_HL - R 14 Linear E0h FW_PRI_VERSION - R 8 ASCII Varies E1h FW_SEC_VERSION - R 8 ASCII Varies F1h ISP_UNLOCK_CODE - R/W 4 ASCII Command available in ISP Mode F2h ISP_CTRL_CMD - W 1 Bitmap ped Command available in ISP Mode F3h ISP_STATUS_BYTE - R 1 Bitmap ped Command available in ISP Mode F4h ISP_FLASH_ADDR - R/W 4 Raw Command available in ISP Mode F5h ISP_FLASH_DATA - R/W 4 Raw Command available in ISP Mode Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 111 Application Notes Current Sharing The LCC600 series main output V1 is equipped with current sharing capability. This will allow up to 5 power supplies to be connected in parallel for higher power application. Current share accuracy is typically 10% of full load. The I2C Line should be connected separately when the number of units in parallel is more than 5. The table below shows the rated Maximum Power capacity when units are in parallel configuration. This is to consider the 10% load sharing tolerance. Max load during start-up in parallel operation is limited to 600W (max power of one supply). Number of Units in Parallel (N) Maximum Output power Rated + [(N-1) x 0.8] x Rated, Where: Rated - 600W, N - Number of PSU in Parallel Stand-alone 600W 2 1080W 3 1560W 4 2040W 5 2520W The PSU will have an active load sharing percentage as shown below. Rail Loading (%) Sharing Percent Error(%) 25% 30% 50% 15% 75% 15% 100% 10% Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 112 Internal Temperature Sensors The outlined temperature reading by universal PMBUS GUI below shows the internal temperature sensors in the power supply and detail reading values of these sensors. Also the limitations presented to know if the temperature still allowed. 8Dh - Internal secondary output hotspot (near baseplate): Ref as OUTPUT 8Eh - Internal primary hotspot (at FET heatsink): Ref as HEATSINK 8Fh - Internal primary input hotspot (near baseplate): Ref as INPUT 8Dh - Maximum allowed temperature is 111 OC. And cold temperature read out limitation is -10 OC. 8Eh - Maximum allowed temperature is 124 OC. And cold temperature read out limitation is -10 OC. 8Fh - Maximum allowed temperature is 101 OC. And cold temperature read out limitation is -10 OC. Note - Maximum temperature sensor readings above indicates 87 degC on baseplate center point which is maximum allowed as baseplate hot spot. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 113 Output Ripple and Noise Measurement The setup outlined in the diagram below has been used for output voltage ripple and noise measurements on the. LCC600 series when measuring output ripple and noise, a scope jack in parallel with a 0.1uF ceramic chip capacitor, and a 10 uF aluminum electrolytic capacitor should be used. Oscilloscope should be set to 20 MHz bandwidth for this measurement. Artesyn Embedded Technologies Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 114 Accessories Orderable Part Number Description 70-841-030 For Suffix "-9P" AC Input Mating Connector Cable Assembly (with 0.3 m wire length) 73-788-001 J1501 (20 Pin Control Signal) Mating Connector with 0.3 m wires attached for "-9P" suffix 70-841-031 Pre-Cut thermal insulator (Laird TFLEX HR220FG) 700-014447-0000 MIL-STD-461F AC input In-line EMI filter (Zhongguang ZGLPG10-02M) 73-769-002 USB to I2C High Speed Adaptor for PMBus Communication 750-007213-0000 J1501 (20 Pin) Mating connector with 10 Pin header termination for use with 73-769-002 466-003103-0000 Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm; Aluminum with natural finish; Weight = 1.7 kgs Artesyn Embedded Technologies Diagram Technical Reference Note Rev.03.23.18_#2.4 LCC600 series Page 115 Record of Revision and Changes Issue Date Description Originators 1.2 07.08.2015 Add WP pin description on page 36, delete the spare pin description, update error in slot ID digits, add SGND in the circuit on page 36, define "S" as send bytes. K. Wang 1.3 09.10.2015 Add 48V and 28H. K. Zou 1.4 11.24.2015 Update the command List 40h,42h,43h,44h the default value as 7A00,7200,5600,500A. And update the issue per design comment. K. Zou 1.5 09.08.2016 Add 12V and 36V and update some issue. D. Hou 1.6 10.26.2016 Add part number LCC600-28U-9P24. Add Dimming function. And add the Accessories page. D. Hou 1.7 12.23.2016 Indicate the word "Qualification" besides the "Isolation Voltage" wording in the table indicate the word "Qualification" besides the "Isolation Voltage" wording in the table Update the OTP in table 3 K. Wang 1.8 02.24.2017 Add `OR-ing FET' on first page. D. Hou 1.9 04.07.2017 Update the address part A2,A1,A0 K. Wang 2.0 04.27.2017 Update the leakage current K. Wang 2.1 07.12.2017 Update the leakage current D. Hou 2.2 08.17.2017 Update the "ISHARE" pin description D. Hou 2.3 08.24.2017 Add note of 8Dh,8Eh,8Fh cold temperature read out limit -10 OC D. Hou 2.4 03.23.2018 Add a baseplate temperature location picture in page44 K. Wang Artesyn Embedded Technologies