DECA - Arrow Electronics - Datasheet.Live

Rev.03.23.18_#2.4

LCC600 series

Page 1

Technical Reference Note

LCC600 Series

600 Watts

Conduction Mounting

Total Power: 600 W

Input Voltage:

U suffix: 90 to 264 Vac

H suffix: 180 to 305 Vac

# of Outputs: Main and Standby

Main Output: 12/28/36/48 Vdc

Special Features

• 600 W full power at elevated

temperatures

• Wide Operating Temperature

Range (-40 OC to 85 OC baseplate)

• Adjustable Output

• Remote Output On/Off

• AC_OK; DC_OK Signals

• 5V standby Voltage

• Active Current Share

• Conduction-cooled / Fanless

• I2C / PMBusTM

• Medical and ITE Safety

• Suited for BF Type applications

• Active Power Factor Correction

• Optional IP65 variant

• Optional 277Vac input variant

• OR-ing FET

Safety

• UL+CSA 60950-1 2nd Ed.

ANSI ES60601-1

UL8750

CSA-C22.2 No.250.13

• TUV 60950-1 2nd Ed.

60601-1 3rd Ed.

EN61347-1

EN61347-2-13

• CB Scheme IEC60950-1

IEC60601-1

IEC61347-1

IEC61347-2-13

• China CCC

• CE Mark

Product Descriptions

LCC600 series are 600W fanless, conduction-cooled, power supplies that accept

universal AC input of 90Vac to 264Vac (Safety rating: 100-240 Vac) or 180Vac to

305Vac (Safety rating: 200-277 Vac). Among its key attributes include:

- Wide operating temperature range from -40OC to 85OC baseplate temperature;

- Higher useable power at elevated operating temperatures;

- Fanless; conduction cooling;

- IP65 rated enclosure

The LCC600 series also carry international approvals encompassing ITE and

Medical safeties making it suitable for various applications like outdoor/indoor

signage, surveillance; sealed box applications with no airflow; RF antennas;

medical clean rooms and High-Rel installations where fan noise, operation or

failure is not desirable.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 2

Model Numbers

Options

None

Model1,2 Input

Voltage

Output

Voltage

Adjustment

Range

Minimum

Load

Maximum

Load

Maximum

Output

Power

Typical

Efficiency3

Stand-By

Supply

LCC600-12U-9P 90-264Vac 12.0V 12V-15V 0A 50A 600W 92.3% 5V@1.5A

LCC600-12H-9P 180-305Vac 12.0V 12V-15V 0A 50A 600W 92.3% 5V@1.5A

LCC600-28U-9P24 90-264Vac 24.0V 24V-30V 0A 25A 600W 93.0% 5V@1.5A

LCC600-28U-9P 90-264Vac 28.0V 24V-30V 0A 25A4600W 93.5% 5V@1.5A

LCC600-28H-9P 180-305Vac 28.0V 24V-30V 0A 25A4600W 93.5% 5V@1.5A

LCC600-36U-9P 90-264Vac 36.0V 32V-38V 0A 16.7A 600W 92.0% 5V@1.5A

LCC600-36H-9P 180-305Vac 36.0V 32V-38V 0A 16.7A 600W 92.0% 5V@1.5A

LCC600-48U-9P 90-264Vac 48.0V 44V-54V 0A 12.5A 600W 93.0% 5V@1.5A

LCC600-48H-9P 180-305Vac 48.0V 44V-54V 0A 12.5A 600W 93.0% 5V@1.5A

Note 1- Change suffix "-9P" to "-4P" for IP65 rated enclosure with fly lead wires

Change suffix "-4P" to "-4PR" for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 VDC)

Change suffix "-4P" to "-4PV" to omit control cable (applies to 28, 36, 48 VDC)

Note 2- U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only.

Note 3- Typical efficiency at high line, factory default voltage and full load.

Note 4- When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout

is 21.43 A (600 W max).

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 3

Table 1. Absolute Maximum Ratings:

Parameter Model Symbol Min Typ Max Unit

Input Voltage

AC continuous operation1

U Suffix

H Suffix VIN,AC

90

180

-

264

305

Vac

Maximum Output Power All models PO,max - - 600 W

Isolation Voltage(Qualification)

Input to output (2X MOPP)

Input to safety ground (1X MOPP)

Outputs to safety ground (1X MOPP)

U Suffix

-

4000

1500

Vac

Isolation Voltage(Qualification)

Input to output

Input to safety ground

Outputs to safety ground

H Suffix

-

3000

2000

1500

Vac

Isolation Voltage(Production)

Input to output (2X MOPP)

Input to safety ground (1X MOPP)

Outputs to safety ground (1X MOPP)

U Suffix

-

1800

1500

Vac

Isolation Voltage(Production)

Input to output

Input to safety ground

Outputs to safety ground

H Suffix

-

2500

2200

1500

Vac

Baseplate Operating Temperature All models TBASEPLATE -40 - +852 OC

Storage Temperature All models TSTG -40 - +85 OC

Humidity (non-condensing)

Operating

Non-operating

All models

10

-

95

%

Altitude

Operating

Non-operating

All models

-

16,402

50,000

feet

Note 1 - U suffix - Safety rating: 100-240 Vac.

H suffix - Safety rating: 200-277 Vac.

Note 2 - With derating up to 95 OC, detail see page 44.

Electrical Specifications

Absolute Maximum Ratings

Stress in excess of those listed in the “Absolute Maximum Ratings” may cause permanent damage to the power supply.

These are stress ratings only and functional operation of the unit is not implied at these or any other conditions above

those given in the operational sections of this TRN. Exposure to any absolute maximum rated condition for extended

periods may adversely affect the power supply’s reliability.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 4

Table 2. Input Specifications:

Parameter Conditions Symbol Min Typ Max Unit

Operating Input

Voltage, AC

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

All VIN,AC

90 115/230 264

Vac

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

180 230/277 305

Operating Input

Voltage, DC1

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

All VIN,DC

127 - 374

Vdc

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

254 - 420

Input AC Frequency All fIN,AC

47 50/60 63

4402Hz

Maximum Input

Current

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

VIN,AC = 90Vac

IIN,max

- - 10

A

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

VIN,AC = 180Vac - - 5

No Load Input

Current

(VO=On, IO= 0A)

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

VIN,AC = 90Vac

IIN,no-load

- - 150

mA

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

VIN,AC = 180Vac - - 250

Note 1 - DC input rating not part of product’s Safety approval.

Note 2 - Meets functional parameters.

Input Specifications

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 5

Table 2. Input Specifications cont’s:

Parameter Conditions Symbol Min Typ Max Unit

No Load Input Power

(VO=On, IO= 0A)

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

VIN,AC = 90Vac

PIN,no-load

- - 6.0

W

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

VIN,AC = 180Vac - - 5.0

Harmonic Line Currents All THD Per EN61000-3-2 Class A and Class C3

Power Factor

IO= IO,max

VIN,AC =230Vac

f=50/60Hz

PF - 0.99 -

Startup Surge Current (Inrush)

@ 25OC4All - - 25 APK

Input Fuse

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

All

- - 12.5 A

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

- - 7 A

Leakage Current to earth ground

U Suffix: 264Vac,60Hz5

U Suffix: 264Vac,50Hz6

H Suffix: 305Vac

-

115

387

200

500

3500

uA

PFC Switching Frequency All fSW,PFC - 74 - KHz

Operating Efficiency

@ 25OC

LCC600-12U

LCC600-28U

LCC600-36U

LCC600-48U

IO= IO,max

VIN,AC =230Vac



-

92.3

93.5

92.0

93.0

-

%

LCC600-12H

LCC600-28H

LCC600-36H

LCC600-48H

IO= IO,max

VIN,AC =277Vac

-

92.3

93.5

92.0

93.0

-

Note 3 - Meets Class C ≥ 50% load.

Note 4 - Measured per standard test conditions.

Note 5 - Per ANSI/ES60601; 264 Vac split-phase/ 60Hz

Note 6 - Per IEC60601; 264 Vac/ 50Hz

Input Specifications

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 6

Table 3. Output Specifications:

Parameter Condition Symbol Min Typ Max Unit

Factory Set Voltage

LCC600-12U

LCC600-12H

IO= 50% rated load VO

11.94 12.00 12.06

Vdc

LCC600-28U

LCC600-28H 27.86 28.00 28.14

LCC600-36U

LCC600-36H 35.82 36.00 36.18

LCC600-48U

LCC600-48H 47.76 48.00 48.24

Output Voltage

Adjustment Range

LCC600-12U

LCC600-12H

IO= 0A VO

12.00 12.00 15.00

Vdc

LCC600-28U

LCC600-28H 24.00 28.00 30.00

LCC600-36U

LCC600-36H 32.00 36.00 38.00

LCC600-48U

LCC600-48H 44.00 48.00 54.00

Output Regulation

LCC600-12U

LCC600-12H

Inclusive of set-point,

temperature change,

warm-up drift and

dynamic load

VO

11.76 12.00 12.24

Vdc

LCC600-28U

LCC600-28H 27.44 28.00 28.56

LCC600-36U

LCC600-36H 35.28 36.00 36.72

LCC600-48U

LCC600-48H 47.04 48.00 48.96

All models VSB 4.75 5.00 5.25

Output Ripple, pk-pk

LCC600-12U

LCC600-12H Measure with a 0.1μF

ceramic capacitor in

parallel with a 10μF

tantalum capacitor, 0

to 20MHz bandwidth

At -40 OC, unit needs

thermal stabilization

time

VO

- - 120

mVPK-PK

LCC600-28U

LCC600-28H - - 280

LCC600-36U

LCC600-36H - - 360

LCC600-48U

LCC600-48H - - 480

All models VSB - - 50

Output dimming

By external voltage

-

0 - 10 Vdc

By external resistance 0 - 100 kOhm

Output Specifications

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 7

Table 3. Output Specifications cont’s:

Parameter Condition Symbol Min Typ Max Unit

Output Current

LCC600-12U

LCC600-12H

All

IO

0 - 50

A

LCC600-28U

LCC600-28H 0 - 21.5

LCC600-36U

LCC600-36H 0 - 16.7

LCC600-48U

LCC600-48H 0 - 12.5

All models ISB 0 - 1.5

Output Power All P 0 - 6001W

Ripple Switching Frequency All fSW 150 - 300 KHz

Over Voltage Protection

Main

Standby All VO

125

-

145

130 %VO,max

Over Current Protection

Main

Standby All IO

105

-

130

140 %IO,max

Baseplate temperature

OTP level

Hysteresis

All TA90

15

95

33

98

-

OC

Quantity of Units in Parallel

Operation

Main Output

"ISHARE" connected - - - 5 Units

VOLoad Capacitance Start up - 0 - 330 mF/A

VODynamic

Response

Peak Deviation

Settling Time

IO,min = 8.5W (15W for

12V) to 25% IO, max

change, slew rate =

1A/us

%VO

Ts

-

3

500

%

uSec

Peak Deviation

Settling Time

IO,min = 8.5W (15W for

12V) to 50% IO,max

change, slew rate =

1A/us

%VO

Ts

-

5

500

%

uSec

Peak Deviation

Settling Time

50%IO,max to IO,max

change, slew rate =

1A/us

%VO

Ts

-

3

500

%

uSec

VOLong Term Stability

Max change over 24 hours

After thermal

equilibrium (30 mins) %VO- - 2 %

Note 1 - Maximum power is limited to 600W.

For LCC600-48 when output is adjusted down to 44V, output power is 550W max.

For LCC600-36 when output is adjusted down to 32V, output power is 535W max.

For LCC600-12 when output is adjusted up to 15V, output power is 525W max.

Output Specifications

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 8

Table 4. Output current with the output voltage level from minimum to maximum trimming:

Series

Nominal

Output Voltage

(V)

Output Voltage

Trimming Range

(V)

Iout_max

(A)

Pout_max

(W)

Lowest Voltage For

CC mode application

(V)

LCC600-12x-xx 12

12 50.00 600

10.8

13 46.15 600

14 39.30 550

15 35.00 525

LCC600-28x-xx 28

24 25.00 600

21.6

25 24.00 600

26 23.08 600

27 22.22 600

28 21.42 600

29 20.70 600

30 20.00 600

LCC600-36x-xx 36

32 16.70 534

28.8

33 16.70 551

34 16.70 568

35 16.70 585

36 16.66 600

37 16.21 600

38 15.78 600

LCC600-48x-xx 48

44 12.50 550

39.6

45 12.50 563

46 12.50 575

47 12.50 588

48 12.50 600

49 12.25 600

50 12.00 600

51 11.76 600

52 11.53 600

53 11.32 600

54 11.11 600

Output Specifications

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 9

System Timing Specifications

Table 5. System Timing Specifications:

Label Parameter Min Typ Max Unit

T1 Delay from AC being applied to VO being within regulation - 1500 2500 mSec

T2 Delay from AC being applied to G_ACOK_C signal assertion

(going Low) 200 450 1000 mSec

T3 VOrise time, 0V to VOin regulation - 50 100 mSec

T4 Delay from VO within regulation to G_DCOK_C signal

assertion (going Low) - 200 500 mSec

T5 Delay from AC loss to VO falling out of regulation. VOat

nominal set point. 20 - - mSec

T6 Delay from AC loss to G_ACOK_C signal de-assertion

(going High) - 10 15 mSec

T7 Delay from G_DCOK_C signal de-assertion (going High) to

VO dropping to less than the output lower trimming range 1 9 - mSec

T8 Delay from INH_EN going High to VO being within regulation - 112 1500 mSec

T9 Delay from INH_EN assertion (Pulled low) to G_DCOK_C

signal going High. - 1.2 3 mSec

T10 Delay from AC being applied to VSB output being within

regulation. - 120 1000 mSec

T11 Delay from AC loss to VSB going out of regulation. Last one

to turn-off to guarantee other logic & control functionality 100 120 - mSec

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 10

System Timing Specifications

Figure 1. System Timing Diagram:

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 11

LCC600-12U-9P Performance Curves

Figure 1: LCC600-12U-9P Turn-on delay via AC mains – Vin = 90Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 5: LCC600-12U-9P Output Startup Characteristic – Vin = 90Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 2: LCC600-12U-9P Turn-on delay via INH_EN – Vin = 90Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 4: LCC600-12U-9P Hold-up Time – Vin = 264Vac / 47Hz / 0°

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 6: LCC600-12U-9P Ripple and Noise Measurement

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 3: LCC600-12U-9P Hold-up Time – Vin = 90Vac / 63Hz / 0°

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 12

LCC600-12U-9P Performance Curves

Figure 8: LCC600-12U-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

Figure 9: LCC600-12U-9P Turn Off Characteristic via INH_EN

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 7: LCC600-12U-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

x

Figure 10: LCC600-12U-9P Efficiency Curves @ 25 degC

90 Vac 115Vac 230Vac 264Vac

Loading: Io = 10% increment to 50A , ISB=1.5A

75

78

81

84

87

90

93

96

0 5 10 15 20 25 30 35 40 45 50

Efficiency (%)

Output current (A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 13

LCC600-12H-9P Performance Curves

Figure 11: LCC600-12H-9P Turn-on delay via AC mains – Vin = 180Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 15: LCC600-12H-9P Output Startup Characteristic – Vin = 180Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 12: LCC600-12H-9P Turn-on delay via INH_EN – Vin = 180Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 14: LCC600-12H-9P Hold-up Time – Vin = 305Vac / 47Hz / 0°

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 16: LCC600-12H-9P Ripple and Noise Measurement – Vin = 180Vac

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 13: LCC600-12H-9P Hold-up Time – Vin = 180Vac / 63Hz / 0°

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 14

LCC600-12H-9P Performance Curves

Figure 18: LCC600-12H-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

Figure 19: LCC600-12H-9P Turn Off Characteristic via INH_EN

Full Load: Io = 50A (12V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 17: LCC600-12H-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

x

Figure 20: LCC600-12H-9P Efficiency Curves @ 25 degC

180 Vac 230Vac 277Vac 305Vac

Loading: Io = 10% increment to 50A , ISB=1.5A

75

78

81

84

87

90

93

96

0 5 10 15 20 25 30 35 40 45 50

Efficiency (%)

Output current(A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 15

LCC600-28U-9P Performance Curves

Figure 21: LCC600-28U-9P Turn-on delay via AC mains – Vin = 90Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 25: LCC600-28U-9P Output Startup Characteristic – Vin = 90Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 22: LCC600-28U-9P Turn-on delay via INH_EN – Vin = 90Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 24: LCC600-28U-9P Hold-up Time – Vin = 264Vac / 47Hz / 0°

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 26: LCC600-28U-9P Ripple and Noise Measurement – Vin = 90Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 23: LCC600-28U-9P Hold-up Time – Vin = 90Vac / 63Hz / 0°

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 16

LCC600-28U-9P Performance Curves

Figure 28: LCC600-28U-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

Figure 29: LCC600-28U-9P Turn Off Characteristic via INH_EN

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 27: LCC600-28U-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

x

Figure 30: LCC600-28U-9P Efficiency Curves @ 25 degC

90 Vac 115Vac 230Vac 264Vac

Loading: Io = 10% increment to 21.5A , ISB=1.5A

75

78

81

84

87

90

93

96

0 2.15 4.3 6.45 8.6 10.75 12.9 15.05 17.2 19.35 21.5

Efficiency (%)

Output current (A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 17

LCC600-28H-9P Performance Curves

Figure 31: LCC600-28H-9P Turn-on delay via AC mains – Vin = 180Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 35: LCC600-28H-9P Output Startup Characteristic – Vin = 180Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 32: LCC600-28H-9P Turn-on delay via INH_EN – Vin = 180Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 34: LCC600-28H-9P Hold-up Time – Vin = 305Vac / 47Hz / 0°

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 36: LCC600-28H-9P Ripple and Noise Measurement – Vin = 180Vac

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 33: LCC600-28H-9P Hold-up Time – Vin = 180Vac / 63Hz / 0°

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 18

LCC600-28H-9P Performance Curves

Figure 38: LCC600-28H-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

Figure 39: LCC600-28H-9P Turn Off Characteristic via INH_EN

Full Load: Io = 21.5A (28V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 37: LCC600-28H-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

x

Figure 40: LCC600-28H-9P Efficiency Curves @ 25 degC

180 Vac 230Vac 277Vac 305Vac

Loading: Io = 10% increment to 21.5A , ISB=1.5A

75

78

81

84

87

90

93

96

0 2.15 4.3 6.45 8.6 10.75 12.9 15.05 17.2 19.35 21.5

Efficiency (%)

Output current(A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 19

LCC600-36U-9P Performance Curves

Figure 41: LCC600-36U-9P Turn-on delay via AC mains – Vin = 90Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 45: LCC600-36U-9P Output Startup Characteristic – Vin = 90Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 42: LCC600-36U-9P Turn-on delay via INH_EN – Vin = 90Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 44: LCC600-36U-9P Hold-up Time – Vin = 264Vac / 47Hz / 0°

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 46: LCC600-36U-9P Ripple and Noise Measurement – Vin = 90Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 43: LCC600-36U-9P Hold-up Time – Vin = 90Vac / 63Hz / 0°

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 20

LCC600-36U-9P Performance Curves

Figure 48: LCC600-36U-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

Figure 49: LCC600-36U-9P Turn Off Characteristic via INH_EN

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 47: LCC600-36U-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

x

Figure 50: LCC600-36U-9P Efficiency Curves @ 25 degC

90 Vac 115Vac 230Vac 264Vac

Loading: Io = 10% increment to 16.7A , ISB=1.5A

75

78

81

84

87

90

93

96

0 1.67 3.34 5.01 6.68 8.35 10.02 11.69 13.36 15.03 16.7

Efficiency (%)

Output current (A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 21

LCC600-36H-9P Performance Curves

Figure 51: LCC600-36H-9P Turn-on delay via AC mains – Vin = 180Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 55: LCC600-36H-9P Output Startup Characteristic – Vin = 180Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 52: LCC600-36H-9P Turn-on delay via INH_EN – Vin = 180Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 54: LCC600-36H-9P Hold-up Time – Vin = 305Vac / 47Hz / 0°

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 56: LCC600-36H-9P Ripple and Noise Measurement – Vin = 180Vac

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 53: LCC600-36H-9P Hold-up Time – Vin = 180Vac / 63Hz / 0°

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 22

LCC600-36H-9P Performance Curves

Figure 58: LCC600-36H-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

Figure 59: LCC600-36H-9P Turn Off Characteristic via INH_EN

Full Load: Io = 16.7A (36V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 57: LCC600-36H-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

x

Figure 60: LCC600-36H-9P Efficiency Curves @ 25 degC

180 Vac 230Vac 277Vac 305Vac

Loading: Io = 10% increment to 16.7A , ISB=1.5A

75

78

81

84

87

90

93

0 1.67 3.34 5.01 6.68 8.35 10.02 11.69 13.36 15.03 16.7

Efficiency (%)0

Output current(A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 23

LCC600-48U-9P Performance Curves

Figure 61: LCC600-48U-9P Turn-on delay via AC mains – Vin = 90Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 65: LCC600-48U-9P Output Startup Characteristic – Vin = 90Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 62: LCC600-48U-9P Turn-on delay via INH_EN – Vin = 90Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 64: LCC600-48U-9P Hold-up Time – Vin = 264Vac / 47Hz / 0°

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 66: LCC600-48U-9P Ripple and Noise Measurement – Vin = 90Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 63: LCC600-48U-9P Hold-up Time – Vin = 90Vac / 63Hz / 0°

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 24

LCC600-48U-9P Performance Curves

Figure 68: LCC600-48U-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

Figure 69: LCC600-48U-9P Turn Off Characteristic via INH_EN

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 67: LCC600-48U-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 230Vac

Ch 1: Vo Ch 2: Io

x

Figure 70: LCC600-48U-9P Efficiency Curves @ 25 degC

90 Vac 115Vac 230Vac 264Vac

Loading: Io = 10% increment to 12.5A , ISB=1.5A

75

78

81

84

87

90

93

96

0.00 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50

Efficiency (%)

Output current (A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 25

LCC600-48H-9P Performance Curves

Figure 71: LCC600-48H-9P Turn-on delay via AC mains – Vin = 180Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4:G_DCOK_C

Figure 75: LCC600-48H-9P Output Startup Characteristic – Vin = 180Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 3: Vo Ch 4: G_DCOK_C

Figure 72: LCC600-48H-9P Turn-on delay via INH_EN – Vin = 180Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 74: LCC600-48H-9P Hold-up Time – Vin = 305Vac / 47Hz / 0°

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 76: LCC600-48H-9P Ripple and Noise Measurement – Vin = 180Vac

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: Vo

Figure 73: LCC600-48H-9P Hold-up Time – Vin = 180Vac / 63Hz / 0°

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: AC Mains Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 26

LCC600-48H-9P Performance Curves

Figure 78: LCC600-48H-9P Transient Response – Vo Deviation (high to low)

100% to 50% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

Figure 79: LCC600-48H-9P Turn Off Characteristic via INH_EN

Full Load: Io = 12.5A (48V), ISB = 1.5A (5V)

Ch 1: INH_EN Ch 2: VSB Ch 3: Vo Ch 4: G_DCOK_C

Figure 77: LCC600-48H-9P Transient Response - Vo Deviation (low to high)

50% to 100% load change, 1A/uS slew rate, Vin = 277Vac

Ch 1: Vo Ch 2: Io

x

Figure 80: LCC600-48H-9P Efficiency Curves @ 25 degC

180 Vac 230Vac 277Vac 305Vac

Loading: Io = 10% increment to 12.5A , ISB=1.5A

75

78

81

84

87

90

93

0.00 1.25 2.50 3.75 5.00 6.25 7.50 8.75 10.00 11.25 12.50

Efficiency (%)0

Output current(A)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 27

Protection Function Specification

Input Fusing

LCC600 -U suffix module is equipped with an internal non user serviceable 12.5A High Rupturing Capacity (HRC) 250

Vac fuse for fault protection in both the Live and Neutral lines input.

LCC600 -H suffix module is equipped with an internal non user serviceable 7A High Rupturing Capacity (HRC) 350 Vac

fuse for fault protection in both the Live and Neutral lines input.

Over Voltage Protection (OVP)

The power supply latches off during output over voltage with the AC line recycled to reset the latch.

OVP

Over Current Protection (OCP)

LCC600 series includes internal current limit circuitry to prevent damage in the event of overload or short circuit. Recovery

is automatic when the overload is removed. No damage will result to the supply as the result of either short term or long

term overloads of the output. To be measured under all line and load conditions. In case of continued overload, main

output will retry after 20sec. Optional constant current using hardware modification or digital methods is required as part of

the design. CC mode supported up to the lowest output trim range.

Main Output

Response: Output will shutdown and auto recover within a period 20sec. If overload still present after the 20sec time frame,

main output will latch and needs AC recycle or inhibit toggling or thru PMbus command to turn unit back on.

5V Standby

Response: Output will shutdown and auto recover within a period 20sec. If overload still present after the 20sec time frame,

5Vstandby and main output will latch needs AC recycle.

Short Circuit Protection (SCP)

The LCC600 series will protect itself when any output is shorted to ground or to any other output. The power supply will

withstand a continuous short circuit with no permanent damage, applied to its main output during start-up or while running.

Over Temperature Protection (OTP)

The power supply is internally protected against over temperature conditions. The OTP is auto recovery mode.

Parameter Min Nom Max Unit

VOOutput Overvoltage 125 / 145 % VO

VSB Output Overvoltage 125 / 155 % VO

Parameter Min Nom Max Unit

VOOutput Overcurrent 105 / 130 % IO,max

VSB Output Overcurrent 105 / 140 % IO,max

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 28

Mechanical Specifications

Mechanical Outlines

“-9P” Suffix

Unit: mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 29

Mechanical Outlines

“-4P” Suffix (12 Vdc)

Unit: mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 30

Mechanical Outlines

“-4P” Suffix (28, 36, 48 Vdc)

Unit: mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 31

Mechanical Outlines

“-4PR” Suffix - Right Angle Cables (28, 36, 48 Vdc)

Unit: mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 32

Mechanical Outlines

“-4PV” Suffix - Signal Cable Removed (28, 36, 48 Vdc)

Unit:mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 33

Mechanical Outlines

Thermal Interface PN: 70-841-031

3D View

Unit:mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 34

Mechanical Outlines

Extruded Heatsink PN: 466-003103-0000

3D View

Unit:mm

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 35

Connector Definitions

AC Input Connector (-9P)

L1 – Line

L2 – Neutral

G – Ground

AC Input Connector (-4P)

Brown – Line

Blue – Neutral

Y/GR – Ground

Output Connector (-9P)

+Vout – Main Output

-Vout – Main Output Return GND

Output Connector (-4P)

Red – Main Output

Black – Main Output Return GND

G L2L1

+Vout+Vout

- Vout

“-4P” Suffix (28Vdc,36Vdc,48Vdc Output)

+Vout+Vout- Vout - Vout

“-9P” Suffix

“-4P” Suffix

“-9P” Suffix

“-4P” Suffix (12Vdc Output)

+Vout- Vout

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 36

Table 6. Output Signal Connector Pin Assignment

Signals Description Amps per Pin -9P Suffix J1501

Pin Number1

-4P Suffix

Wire Color

A2_OUT EEPROM Address N/A 1 BLACK

GND Ground / Ishare Return N/A 2 BROWN

A1_OUT EEPROM Address N/A 3 RED

-VOUT_RS Remote Sense Return (Main O/P) N/A 4 ORANGE

ISHARE Load share voltage N/A 5 YELLOW

A0_OUT EEPROM Address N/A 6 GREEN

SDA Serial Data Signal(I2C) N/A 7 BLUE

SPARE_1 Spare/Unused Pin N/A 8 VIOLET

SCL Serial clock Signal (I2C) N/A 9 GRAY

+VOUT_RS Remote Sense (Main O/P) N/A 10 WHITE

5VSB 5V Standby (1.5A Max) 1.5 11 PINK

SGND 5V Standby Return 1.5 12 LIGHT BLUE

SPARE_2 Spare/Unused Pin N/A 13 WHITE/VIOLET

G_DCOK_C Global DC_OK Collector N/A 14 WHITE/YELLOW

WP EEPROM Write Protect N/A 15 WHITE/ORANGE

G_DCOK_E Global DC_OK Emitter (GND) N/A 16 WHITE/BLACK

GND Return GND for O/P Signal and I2C

communication N/A 17 WHITE/RED

G_ACOK_C Global AC_OK Collector N/A 18 WHITE/BROWN

INH_EN Output Inhibit Enable Pin (turns output off) N/A 19 WHITE/GREEN

G_ACOK_E Global AC_OK Emitter (GND) N/A 20 WHITE/BLUE

Note 1- The signal pin locations of -9P Suffix J1501 connector showing as below:

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 37

Power / Signal Mating Connectors and Pin Types

“-9P” Suffix (With Safety Cover / Non IP65 Enclosure)

Reference On Power Supply Mating Connector or Equivalent

AC Input Connector Part number: 1-350943-0

Manufacturer: TE Connectivity Co., Ltd.

Part number: 350766-1 (Housing)

Manufacturer: TE Connectivity Co., Ltd.

Part number: 350536-1 (Contact terminal)

Manufacturer: TE Connectivity Co., Ltd.

Or equivalent terminal.

J1501

Part number: CI0120P1HD0-LF;

Manufacturer: LANDWIN Co., Ltd.

Part number: S20B-PHDSS

Manufacturer: JST Mfg. Co., Ltd.

Part number: PHDR-20VS (Housing)

Manufacturer: JST Mfg. Co., Ltd.

Part number: SPHD-001T-P0.5 (contact pins)

Manufacturer: JST Mfg. Co., Ltd.

Or equivalent terminal.

Output Power connector

4-position Terminal Block (M4 screw /

10mm pitch with plastic cover); 12kgf-cm

Torque

Part number: BB-124-08 (19141-0058)

Manufacturer: Molex Co., Ltd.

Or equivalent ring/spade terminal.

“-4P” Suffix (IP65 Enclosure)

Reference Designation / Color Wire Type / Size

AC Input

Live = Brown

Neutral = Blue

Ground = Y/GR

SJTW 18AWGX3C; PVC Jacket;

105 OC/300V

DC Output

12Vdc Output +Vout = Red

-Vout = Black

6AWG Multi-Strand; PVC Jacket;

105 OC/300V

28Vdc,36Vdc,

48Vdc Output

+Vout = Red

-Vout = Black

14AWGX4C; PVC Jacket; 105 OC/300V

Control Cable See Table 6 26AWGX20C+AL; PVC Jacket; 105 OC/300V

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 38

Weight

The LCC600 series weight as below,

For “9P” suffix, weight is 3.59 Ibs / 1.63kg typical.

For “4P” suffix, weight is 3.99 lbs / 1.81kg typical.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 39

Environmental Specifications

EMC Immunity

LCC600 series power supply is designed to meet the following EMC immunity specifications:

Table 7. Environmental Specifications:

Document Description

EN61000-3-2 Harmonics

– Meets Class A at full load condition.

– Meets Class C from 50% load to full load

EN61000-3-3 Voltage Fluctuations (Flicker)

IEC/EN 61000-4-2 ESD

– +/-8KV contact, Performance criteria A

– +/-15kV Air discharge, Performance criteria A

IEC/EN 61000-4-3 RF Field Strength Susceptibility

– 80~1000MHz, 1000~2700MHz (1kHz sinewave with 80% AM: 10V/m)

– Performance Criteria A

IEC/EN 61000-4-4 Fast Transient

– ±0.5kV, ±1.0kV, ±2.0kV for Power Lines and Protective Earth Terminal

– Performance Criteria A

IEC/EN 61000-4-5 Surge

- Level 3, Criteria A: 2KV CM; 1KV DM for U version

- Level 4, Criteria A: 4kV CM; 2kV DM for H version

EN61000-4-6 Levels:

– 1kHz sine wave with 80% AM: 3V

– 6V In ISM bands

– 6V In Amateur radio bands

Frequency Range:

– 0.15-80 (MHz)

– 6.7~6.795, 13.553~13.567, 26.957~27.283, 40.66~40.70 (MHz)

– 1.8~2.0, 3.5~4.0, 5.3~5.4, 7.0~7.3, 10.10~10.15, 14.0~14.2,

18.07~18.17, 21.0~21.4, 24.89~24.99, 28.0~29.7, 50.0~54.0 (MHz)

– Performance Criteria A

EN61000-4-8 Power Freq Magnetic

– Performance Criteria A, Level 4 for Continuous Field, 30A/m

IEC/EN 61000-4-11 Voltage Dips and Interruptions

- 30% reduction for 500 mS – Criteria B;

- >95% reduction for 10 mS, Criteria A;

- >95% reduction for 5000 mS, Criteria C

- Hold-up time of 20mS can be met at full load and nominal output voltage

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 40

MIL-STD-461F MIL-STD-461F EMI

- For CE101; CE102; CS101; CS114; CS115; CS116 (For U input only)

- External EMI filter with P/N ZGLPG-10-02M or ZGLPG-10-02M Type "C"

(Zhongguang Hi Tech) required for Mil-STD EMI compliance

EN60601-1-2 Medical EMC Standard

EN55024:1998 Information Technology Equipment-Immunity Characteristics, Limits and

Method of Measurements

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 41

Safety Certifications

The LCC600 series power supply is intended for inclusion in other equipment and the installer must ensure that it is in

compliance with all the requirements of the end application. This product is only for inclusion by professional installers

within other equipment and must not be operated as a stand alone product.

Table 8. Safety Certifications for LCC600 series power supply system 1

Document File # Description

UL60950-1 2nd Edition US and Canada Requirements with UL 60950-1

CSA 22.2 No. 60950-1 Canada Requirements

ANSI/AAMI ES60601-1

and EN60601-1, Medical

CB report

Medical Requirements

EN60950-1 Deviations International Requirements

CB certificate and Report (All CENELEC Countries)

CE CE Mark

TUV B 14 09 13890 02104

CHINA CCC Approval 2014010907734253 China Requirements

Note1 - U Suffix have both ITE and Medical Safeties. H Suffix carries ITE approval only.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 42

EMI Emissions

The LCC600 series has been designed to comply with the Class B limits of EMI requirements of EN55022 (FCC Part 15)

and CISPR 22 (EN55022) for emissions and relevant sections of EN61000 (IEC 61000) for immunity. The unit was tested

at 600W using resistive load. Conditions is 28V or 48V output, 100%Load, 100Vac input, 60Hz.

Conducted Emissions

The applicable standard for conducted emissions is EN55022 (FCC Part 15). Conducted noise can appear as both

differential mode and common mode noise currents. Differential mode noise is measured between the two input lines, with

the major components occurring at the supply fundamental switching frequency and its harmonics. Common mode noise,

a contributor to both radiated emissions and input conducted emissions, is measured between the input lines and system

ground and can be broadband in nature.

The LCC600 series power supplies have internal EMI

filters to ensure the convertors’ conducted EMI levels

comply with EN55022 (FCC Part 15) Class B and

EN55022 (CISPR 22) Class B limits. The EMI

measurements are performed with resistive loads at

maximum rated loading.

Sample of EN55022 Conducted EMI Measurement at

100Vac input

Note: Red Line refers to Aretsyn Quasi Peak margin,

which is 6dB below the CISPR international limit.

Blue Line refers to the Artesyn Average margin,

which is 6dB below the CISPR international limit.

Table 9. Conducted EMI emission specifications of the LCC600 series

Parameter Model Symbol Min Typ Max Unit

FCC Part 15, class B All Margin - - 6 dB

EN 60601-1-2: 2001 All Margin - - 6 dB

CISPR 22 (EN55022) class B All Margin - - 6 dB

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 43

Radiated Emissions

Unlike conducted EMI, radiated EMI performance in a system environment may differ drastically from that in a stand-alone

power supply. The shielding effect provided by the system enclosure may bring the EMI level from Class A to Class B. It is

thus recommended that radiated EMI be evaluated in a system environment. The applicable standard is EN55022 Class B

(FCC Part 15). Testing ac-dc convertors as a stand-alone component to the exact requirements of EN55022 can be

difficult, because the standard calls for 1m leads to be attached to the input and outputs and aligned such as to maximize

the disturbance. In such a set-up, it is possible to form a perfect dipole antenna that very few ac-dc convertors could pass.

However, the standard also states that the attempt should be made to maximize the disturbance consistent with the typical

application by varying the configuration of the test sample.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 44

Operating Temperature

The LCC600 series power supplies will start and operate within stated specifications at baseplate temperature from -40 OC

to 85OC under all load conditions. The LCC600 series can operate up to a maximum baseplate temperature of 95OC with

derating.

Power Derating Curves

LCC600 series total output power will be derated according to the curve shown below

Base Plate Temperature (deg C) Pout (W)

85 600

95 28

0

100

200

300

400

500

600

700

25 35 45 55 65 75 85 95

Output Power [W]

Baseplate Temperature [OC]

O/P Power vs. Baseplate Temp

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 45

AC Input (Vac) Pout (W)

90-105 550

105-264 600

0

100

200

300

400

500

600

700

90 110 130 150 170 190 210 230 250 270

Output Power [Watts]

Input Voltage [Vac]

O/P Power vs. Input Voltage

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 46

Storage and Shipping Temperature / Humidity

The LCC600 series power supplies can be stored or shipped at temperatures between –40OC to +85OC and humidity from

10% to 95% non-condensing.

Altitude

The LCC600 series will operate within specifications at altitudes up to 16,402 feet above sea level. The power supply will

not be damaged when stored at altitudes of up to 50,000 feet above sea level.

Humidity

The LCC600 series will operate within specifications when subjected to a relative humidity from 10% to 90% non-

condensing. The LCC600 series can be stored in a relative humidity from 10% to 95% non-condensing.

Vibration

The LCC600 series power supply will pass the following vibration specifications:

Non-Operating Random Vibration

Operating Random Vibration

Vibration Testing at Packaging Level

Per MIL-STD- 810G 514.5C-1 and 514.5C-15 random vibration exposure.

Acceleration 1.87 gRMS

Frequency Range 10 to 500 Hz

Duration 30 mins

Direction Three orthogonal axis

PSD Profile

Frequency(Hz) Slope(db/oct) PSD(g2/Hz)

10 - 0.009

200 -2.66 0.009

500 - 0.004

Acceleration 0.153 gRMS

Frequency Range 10 to 500 Hz

Duration 30 mins

Direction Three orthogonal axis

PSD Profile

Frequency(Hz) Slope(db/oct) PSD(g2/Hz)

5 11 0.00003

10-50 - 0.0004

100 -10 0.00003

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 47

Shock

The LCC600 series power supply will pass the following shock specifications:

Non-Operating Half-Sine Shock

Operating Half-Sine Shock

Per MIL-STD-810F 516.5 Procedure I.

Acceleration 30 G

Duration 18 msec

Pulse Half Sine

No. of Shock 3X each in both positive and negative directions

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 48

Power and Control Signal Descriptions

AC Input Connector

This connector supplies the AC Mains to the LCC600 series power supply.

L1 - Line

G - Ground

L2 – Neutral

Output Connector – Terminal Block

These pins provide the main output for the LCC600 series. The + Main Output (VO) and the Main Output Return pins are

the positive and negative rails, respectively, of the VOmain output of the LCC600 series power supply. The Main Output

(VO) is electrically isolated from the power supply chassis.

+Vout –Positive Main Output

-Vout –Return GND for Main Output

Control Signals – J1501

The LCC600 series J1501 contains 20 pins control signal header providing analogy control interface, standby power and

I2C interface.

A0_Out, A1_Out, A2_Out – (Pin 6, Pin3, Pin1)

Please refer to “Communication Bus Descriptions” section.

-VOUT_RS, +VOUT_RS – (Pin 4, Pin10)

This remote sense circuit is designed to compensate for a power path drop around the entire loop of 0.5V. These pins

should be connected as close to the loading as possible, If left open, the remote sense does not work properly and the

voltage level of main output will go lower than the guaranteed spec.

ISHARE – (Pin 5) / Ishare Return (Pin 2)

The main output have active load sharing. The output will share within 10% at full load. All current sharing functions are

implemented internal to the power supply by making use of the ISHARE signal. The system connects the ISHARE lines

between the power supplies. The supplies must be able to load share with up to 5 power supplies in parallel. The I2C Line

should be connected separately when the number of units in parallel is more than 5.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 49

SDA, SCL, GND – (Pin 7, Pin9, Pin17)

Please refer to “Communication Bus Descriptions” section.

5VSB, SGND – (Pin11, Pin12)

The LCC600 series provides a regulated 5 volt 1.5 amp auxiliary output voltage to power critical circuitry that must remain

active regardless of the on/off status of the power supply’s main output. The 5V VSB voltage is available whenever a valid

AC input voltage is applied to the unit.

G_DCOK_C, G_DCOK_E – (Pin14, Pin16)

G_DCOK_C is a power good signal and is pulled LOW by the power supply to indicate that both the outputs are above the

regulation limits of the power supply. When any output voltage falls below regulation limits or when AC power has been

removed for a time sufficiently long so that power supply operation is no longer guaranteed, G_DCOK_C will be de-

asserted to a HIGH state. Connect 4.7K ohm resistor on G_DCOK_C to PSU’s 5V VSB.

WP – (Pin15)

Write Protect Allows Read/Write operation when connected to GND. When WP pin is connected to 3.3V, the write

protection is enabled.

G_ACOK_C, G_ACOK_E – (Pin18, Pin20)

G-ACOK_C signal is used to indicate presence of AC input to the power supply. A logic “Low” level on this signal will

indicate AC input to the power supply is present. A Logic “High” on this signal will indicate a loss of AC input to the power

supply. Connect 4.7K ohm resistor on G_ACOK_C to external 5V power supply.

SGND

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 50

INH_EN – (Pin19)

This signal is required to remotely turn on/off the power supply. When INH_EN is shorted to secondary ground (GND), the

PSU main output will turn OFF, otherwise the main output is ON.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 51

Communication Bus Descriptions

I2C Bus Signals

The LCC600 series power supply contains enhanced monitor and control functions implemented via the I2C bus. The

LCC600 I2C functionality (PMBusTM and FRU data) can be accessed via the output connector control signals. The

communication bus is powered either by the internal 5V supply or from an external power source connected to the

StandBy Output (ie: accessing an unpowered power supply as long as the StandBy Output of another power supply

connected in parallel is on).

If units are connected in parallel or in redundant mode, the StandBy Outputs must be connected together in the system.

Otherwise, the I2C bus will not work properly when a unit is inserted into the system without the AC source connected.

Note: PMBusTM functionality can be accessed only when the PSU is powered-up.

Guaranteed communication I2C speed is 100KHz.

SDA, SCL (I2C Data and Clock Signals) – (pin 7, pin9)

I2C serial data and clock bus - these pins are internally pulled up to internal 3.3V supply with a 4.75K resistor and 5Vsb

with 4.75K resistor. See internal diagram on Page 51 for details. For robustness, recommended to be pulled up by a

resistor Rext. See table on Page 51.

A0, A1, A2 (I2C Address BIT 0, BIT1, BIT2 Signals) – (pin6, pin3, pin1)

These two input pins are the address lines A0 and A1 to indicate the slot position the power supply occupies in the power

bay and define the power supply addresses for FRU data and PMBusTM data communication. This allows the system to

assign different addresses for each power supply. During I2C communication between system and power supplies, the

system will be the master and power supplies will be slave.

They are internally pulled up to internal 3.3V supply with a 2.2K resistor.

I2C Bus Communication Interval

The interval between two consecutive I2C communications to the power supply should be at least 50ms to ensure proper

monitoring functionality.

I2C Bus Signal Integrity

The noise on the I2C bus (SDA, SCL lines) due to the power supply will be less than 450mV peak-to-peak. This noise

measurement should be made with an oscilloscope bandwidth limited to 100MHz.

The noise on the address lines A0, A1 and A2 will be less than 450mV peak-to-peak. This noise measurement should be

made at the power supply output connector.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 52

POWER SUPPLY SIDE

5V Supply 3.3V Supply

SYSTEM

Side

4.75K

2.21K

PSU Monitor

Function

PSU Micro

Controller

SDA SDA

SCL SCL

A1 A1

A0 A0

FRU

DATA

EEPROM

GND

Interconnect

1K

Electrical and Interface specifications of I2C signals (referenced to StandBy Output Return pin, unless otherwise

indicated):

Parameter Condition Symbol Min Typ Max Unit

SDA, SCL internal pull-up resistor Rint - 2.85 - Kohm

SDA, SCL recommended external bus

capacitance Cext 53 pF

Recommended external pull-up resistor 1 to 5 PSU Rext 0.75 - 2.2 Kohm

2.21K

A2

2.7V Z-Diode

Schottky Diode

100

A2

I2C Bus Internal Implementation, Pull-ups and Bus Capacitances

I2C Bus - Recommended external pull-ups:

I2C Bus Internal Implementation, Pull-ups and Bus Capacitances

I2C Bus - Recommended external pull-ups:

I2C Bus Internal Implementation, Pull-ups and Bus Capacitances

I2C Bus - Recommended external pull-ups:

100

4.75K

2.21K

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 53

Logic Levels

LCC600 series power supply I2C Communication Bus will respond to logic levels as per below:

Logic High: 5V Nominal (Specs is 2.1V to 5.5V)**

Logic Low: 500mV nominal (Specs is 800mV max)**

** Note: Artesyn 73-769-001 I2C adapter was used.

Timings

Parameter Symbol Standard-Mode Specs Actual Measured Unit

Min Max

SCL Clock Frequency fSCL 0 100 260 KHz

Hold time (repeated) START

condition tHD;STA 4.0 - 4.736 uS

LOW period of SCL clock tLOW 4.7 - 14.868 uS

HIGH period of SCL clock tHIGH 4.0 - 4.352 uS

Setup time for repeated

START condition tSU;STA 4.7 - 5.566 uS

Data hold time tHD;DAT 0 3.45 0.408 uS

Data setup time tSU;DAT 250 - 921.2 nS

Rise time tr- 1000 SCL = 512 SDA = 560 nS

Fall time tf- 300 SCL = 172 SDA = 126 nS

Setup time for STOP condition tSU;STO 4.0 - 4.282 uS

Bus free time between a

STOP and START condition tBUF 4.7 - 95*** mS

*** Note Artesyn 73-769-001 I2C adapter (USB-to-I2C) and Universal PMBusTM GUI software was used

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 54

Device Addressing

The LCC600 series will respond to supported commands on the I2C PMBusTM that are addressed according

to pins A2,A1 and A0 pins of output connector.

Address pins are held HIGH by default via pulled up to internal 3.3V supply with a 2.2K resistor. To set the address as “0”,

the corresponding address line should be pulled down to logic ground level. Below table show the address of the power

supply with A0 and A1 and A2 pins set to either “0” or “1”:

PSU Slot Slot ID Bits PMBusTM Address EEPROM (FRU)

Address

A2 A1 A0

1 0 0 0 B0 A0

2 0 0 1 B2 A2

3 0 1 0 B4 A4

4 0 1 1 B6 A6

5 1 0 0 B8 A8

6 1 0 1 BA AA

7 1 1 0 BC AC

8 1 1 1 BE* AE

* Default PMBusTM address when A0 and A1 and A2 are left open

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 55

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

FRU (EEPROM) Data

The FRU (Field Replaceable Unit) data format compliant with the Intel IPMI v1.0 specification.

The LCC600 series uses 1 page of EEPROM for FRU purpose. A page of EEPROM contains up to 256 byte-sized data

locations.

Where: OFFSET - The OFFSET denotes the address in decimal format of a particular data byte within

LCC600 series P EEPROM.

VALUE - The VALUE details data written to a particular memory location of the EEPROM.

DEFINITION -The contents DEFINITION refers to the definition of a particular data byte.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 56

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-12U-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “1”=31h 49 31

60 3C “2”=32h 50 32

61 3D “U”=55h 85 55

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 57

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “L477”

81 51 "L" = 4Ch 76 4C

82 52 “4”= 34h 52 34

83 53 “7”= 37h 55 37

84 54 “7”= 37h 55 37

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50h, (For Laguna, Philippines) MANUFACTURING LOCATION 90 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 12H to 67h) (PER UNIT)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 58

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(90V / 10mV) 9000 = 2312H, 2 Bytes Sequence

40

35

28

23

117

118

75

76

High End Input Voltage Range 1(10mV)

(264V/10mV) 26400= 6720H, 2 Bytes Sequence

32

103

20

67

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage 2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Applicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

12V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 59

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 163 A3

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 77 4D

12V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +12V Output Information 1 01

139 8B Nominal Voltage

12.00V = 1200 (x10mV) = 04B0H

176 B0

140 8C 4 04

141 8D Maximum Negative Voltage Deviation

12.00V = 1200 (x10mV) = 04B0H, 2 Bytes Sequence

176 B0

142 8E 4 04

143 8F Maximum Positive Voltage Deviation

15V = 1500 (x10mV) = 05DCH, 2 Bytes Sequence

220 DC

144 90 5 05

145 91 Ripple and Noise pk-pk (mV)

120mV (x 1mV)= 0078H, 2 Bytes Sequence

120 78

146 92 0 00

147 93 Minimum Current Draw (10mA),

0000 = 0000H, 2 Bytes Sequence

0 00

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

50.0A = 5000 (x10mA) = 1388H

136 88

150 96 19 13

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 60

LCC600-12U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 61

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 62

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-12H-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “1”=31h 49 31

60 3C “2”=32h 50 32

61 3D “H”=55h 85 48

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 63

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “L480”

81 51 "L" = 4Ch 76 4C

82 52 “4”= 34h 52 34

83 53 “8”= 38h 55 38

84 54 “0”= 30h 56 30

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50h, (For Laguna, Philippines) MANUFACTURING LOCATION 90 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 12H to 67h) (PER UNIT) 157 9D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 64

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70

2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(180V / 10mV) 18000 = 4650H, 2 Bytes Sequence

80

70

50

46

117

118

75

76

High End Input Voltage Range 1(10mV),

(305V/10mV) 30500= 7724H, 2 Bytes Sequence

36

119

24

77

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Applicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

12V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 65

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 163 A3

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 77 4D

12V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +12V Output Information 1 01

139 8B Nominal Voltage

12.00V = 1200 (x10mV) = 04B0H

176 B0

140 8C 4 04

141 8D Maximum Negative Voltage Deviation

12.00V = 1200 (x10mV) = 04B0H, 2 Bytes Sequence

176 B0

142 8E 4 04

143 8F Maximum Positive Voltage Deviation

15V = 1500 (x10mV) = 05DCH, 2 Bytes Sequence

220 DC

144 90 5 05

145 91 Ripple and Noise pk-pk (mV)

120mV (x 1mV)= 0078H, 2 Bytes Sequence

120 78

146 92 0 00

147 93 Minimum Current Draw (10mA),

0000 = 0000H, 2 Bytes Sequence

0 00

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

50.0A = 5000 (x10mA) = 1388H

136 88

150 96 19 13

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 66

LCC600-12H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 67

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 68

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-28U-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “2”=32h 50 32

60 3C “8”=38h 56 38

61 3D “U”=55h 85 55

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 69

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “K618”

81 51 “K”= 4Bh 75 4B

82 52 “6”= 36h 54 36

83 53 “1”= 31h 49 31

84 54 “8”= 38h 56 38

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 5AH, (For Zhongshan, China) MANUFACTURING LOCATION (PER UNIT) 90 5A

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 70

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(90V / 10mV) 9000 = 2328H, 2 Bytes Sequence

40

35

28

23

117

118

75

76

High End Input Voltage Range 1(10mV)

(264V/10mV) 26400= 6720H, 2 Bytes Sequence

32

103

20

67

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Appllicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

28V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 71

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 243 F3

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 253 FD

28V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +28V Output Information 1 01

139 8B Nominal Voltage

28.00V = 2800 (x10mV) = 0AF0H

240 F0

140 8C 10 0A

141 8D Maximum Negative Voltage Deviation

24.00V = 2400 (x10mV) = 0960H, 2 Bytes Sequence

96 60

142 8E 9 09

143 8F Maximum Positive Voltage Deviation

30.00V = 3000 (x10mV) = 1518H, 2 Bytes Sequence

184 B8

144 90 11 0B

145 91 Ripple and Noise pk-pk (mV)

280mV (x 1mV)= 0118H, 2 Bytes Sequence

24 18

146 92 1 01

147 93 Minimum Current Draw (10mA),

0000 = 0000H, 2 Bytes Sequence

0 00

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

25A = 2500(x10mA) = 09C4H

196 C4

150 96 9 09

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 72

LCC600-28U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5V VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 73

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 74

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-28H-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “2”=32h 50 32

60 3C “8”=38h 56 38

61 3D “H”=48h 72 48

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 75

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “K620”

81 51 “K”= 4Bh 75 4B

82 52 “6”= 36h 56 36

83 53 “2”= 32h 57 32

84 54 “0”= 30h 53 30

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 5AH, (For Zhongshan, China) MANUFACTURING LOCATION (PER UNIT) 90 5A

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 157 9D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 76

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70

2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(180V / 10mV) 18000 = 4650H, 2 Bytes Sequence

80

70

50

46

117

118

75

76

High End Input Voltage Range 1(10mV),

(305V/10mV) 30500= 7724H, 2 Bytes Sequence

36

119

24

77

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Appllicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

28V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 77

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 243 F3

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 253 FD

28V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +28V Output Information 1 01

139 8B Nominal Voltage

28.00V = 2800 (x10mV) = 0AF0H

240 F0

140 8C 10 0A

141 8D Maximum Negative Voltage Deviation

24.00V = 2400 (x10mV) = 0960H, 2 Bytes Sequence

96 60

142 8E 9 09

143 8F Maximum Positive Voltage Deviation

30.00V = 3000 (x10mV) = 0BB8H, 2 Bytes Sequence

184 B8

144 90 11 0B

145 91 Ripple and Noise pk-pk (mV)

280mV (x 1mV)= 0118H, 2 Bytes Sequence

24 18

146 92 1 01

147 93 Minimum Current Draw (10mA)

0000 = 0000H, 2 Bytes Sequence

0 00

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

25A = 2500(x10mA) = 09C4H

196 C4

150 96 9 09

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 78

LCC600-28H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5V VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 79

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 80

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-36U-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “3”=33h 52 33

60 3C “6”=36h 56 36

61 3D “U”=55h 85 55

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 81

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “L292”

81 51 “L”= 4Bh 75 4C

82 52 “2”= 38h 56 32

83 53 “9”= 39h 57 39

84 54 “2”= 35h 53 32

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 82

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(90V / 10mV) 9000 = 2328H, 2 Bytes Sequence

40

35

28

23

117

118

75

76

High End Input Voltage Range 1(10mV)

(264V / 10mV) 26400= 6720H, 2 Bytes Sequence

32

103

20

67

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Applicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

48V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 83

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 122 7A

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 118 76

36V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +36V Output Information 1 01

139 8B Nominal Voltage

36.00V = 3600 (x10mV) = 0E10H

16 10

140 8C 14 0E

141 8D Maximum Negative Voltage Deviation

32.00V = 3200 (x10mV) = 0C80H, 2 Bytes Sequence

128 80

142 8E 12 0C

143 8F Maximum Positive Voltage Deviation

38.00V = 3800 (x10mV) = 0ED8H, 2 Bytes Sequence

216 D8

144 90 14 0E

145 91 Ripple and Noise pk-pk (mV)

360mV = 0168H, 2 Bytes Sequence

104 68

146 92 1 01

147 93 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 0

148 94 0 0

149 95 Minimum Current Draw (10mA), 0000 = 0000H

16.7A = 1670 (x10mA) = 0686H

134 86

150 96 6 06

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 0A

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 84

LCC600-36U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 85

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 86

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-36H-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “3”=33h 52 33

60 3C “6”=36h 56 36

61 3D “H”=36H 72 48

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 87

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “L293”

81 51 "L" = 4Ch 75 4C

82 52 "2" = 32h 56 32

83 53 "9" = 39h 57 39

84 54 "3" = 33h 55 33

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 58 3A

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 88

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(180V / 10mV) 18000 = 4650H, 2 Bytes Sequence

80

70

50

46

117

118

75

76

High End Input Voltage Range 1(10mV),

(305V/10mV) 30500= 7724H, 2 Bytes Sequence

36

119

24

77

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Auto switch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

162 A2

128 80

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Applicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

48V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 89

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 122 7A

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 118 76

36V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +36V Output Information 1 01

139 8B Nominal Voltage

36.00V = 3600 (x10mV) = 0E10H

16 10

140 8C 14 0E

141 8D Maximum Negative Voltage Deviation

32.00V = 3200 (x10mV) = 0C80H, 2 Bytes Sequence

128 80

142 8E 12 0C

143 8F Maximum Positive Voltage Deviation

38.00V = 3800 (x10mV) = 0ED8H, 2 Bytes Sequence

216 D8

144 90 14 0E

145 91 Ripple and Noise pk-pk (mV)

360mV = 0168H, 2 Bytes Sequence

104 68

146 92 1 01

147 93 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 0

148 94 0 0

149 95 Minimum Current Draw (10mA), 0000 = 0000H

16.7A = 1670 (x10mA) = 0686H

134 86

150 96 6 06

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 90

LCC600-36H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5V VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 91

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 92

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-48U-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “4”=34h 52 34

60 3C “8”=38h 56 38

61 3D “U”=55h 85 55

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 93

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “K895”

81 51 “K”= 4Bh 75 4B

82 52 “8”= 38h 56 38

83 53 “9”= 39h 57 39

84 54 “5”= 35h 53 35

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 94

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(90V / 10mV) 9000 = 2328H, 2 Bytes Sequence

40

35

28

23

117

118

75

76

High End Input Voltage Range 1(10mV)

(264V/10mV) 26400= 6720H, 2 Bytes Sequence

32

103

20

67

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

128 80 162 A2

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Appllicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

48V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 95

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 248 F8

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 248 F8

48V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +48V Output Information 1 01

139 8B Nominal Voltage

48.00V = 4800 (x10mV) = 12C0H

192 C0

140 8C 18 12

141 8D Maximum Negative Voltage Deviation

44.00V = 4400 (x10mV) = 1130H, 2 Bytes Sequence

48 30

142 8E 17 11

143 8F Maximum Positive Voltage Deviation

54.00V = 5400 (x10mV) = 1518H, 2 Bytes Sequence

24 18

144 90 21 15

145 91 Ripple and Noise pk-pk (mV)

480mV (x 1mV)= 01E0H, 2 Bytes Sequence

224 E0

146 92 1 01

147 93 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 0A

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

12.50A = 1250(x10mA) = 04E2H

226 E2

150 96 4 04

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 0A

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 96

LCC600-48U-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5V VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 97

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

COMMON HEADER, 8 BYTES

0 00 FORMAT VERSION NUMBER (Common Header)

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

1 01 INTERNAL USE AREA OFFSET 27 1B

2 02 CHASSIS INFO AREA OFFSET 1 01

3 03 BOARD INFO AREA OFFSET 0 00

4 04 PRODUCT INFO AREA OFFSET 5 05

5 05 MULTI RECORD AREA OFFSET 13 0D

6 06 PAD (reserved) Default value is 0. 0 00

7 07 ZERO CHECK SUM (256 – (Sum of bytes 0 to 6)) 209 D1

CHASSIS INFO AREA( 32 BYTES)

8 08 FORMAT VERSION NUMBER

7:4 - Reserved, write as 0000b

3:0 - Format Version Number = 1h for this specification

1 01

9 09 CHASSIS INFO AREA LENGTH in multiple of 8 bytes 4 04

10 0A CHASSIS TYPE (Default value is 0.) 0 00

11 0B CHASSIS PART NUMBER Type/Length CAh (if used)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

193 C1

12

13

14

15

16

17

18

19

20

21

0C

0D

0E

0F

10

11

12

13

14

15

Reserved

0

00

22 16 Reserved 0 00

23

24

25

26

27

28

29

30

17

18

19

1A

1B

1C

1D

1E

Reserved

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 98

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

31

32

33

34

35

36

37

38

1F

20

21

22

23

24

25

26

Reserved

END TAG

0

00

39 27 ZERO CHECK SUM (256 – (Sum of bytes offset 8h to 26h)) 58 3A

PRODUCT INFORMATION AREA

40 28

FORMAT VERSION NUMBER (Product Info Area)

7:4 – Reserved, write as 0000b

3:0 – Format Version Number =1h for this specification

1 01

41 29 PRODUCT INFO AREA LENGTH (In multiples of 8 bytes) 8 08

42 2A Language (English) 25 19

43 2B

MANUFACTURER NAME TYPE / LENGTH

7:6 - (11)b, 8-Bit ASCII + Latin 1,

5:0 - (000111)b, 7-Byte Allocation

199 C7

MANUFACTURER'S NAME 7 byte sequence

“ARTESYN”

44 2C "A" = 41h 65 41

45 2D "R" = 52h 82 52

46 2E "T" = 54h 84 54

47 2F "E" = 45h 69 45

48 30 "S" = 53h 83 53

49 31 "Y" = 59h 89 59

50 32 "N" = 4Eh 78 4E

51 33

PRODUCT NAME Type/Length (CDh)

Type = “ASCII+LATIN1” = (11)b;

Length = 13 Bytes = (001101)b

206 CE

PRODUCT NAME BYTES (14 Byte sequence)

“LCC600-48H-9P”

52 34 “L”=4Ch 76 4C

53 35 “C”=43h 67 43

54 36 “C”=43h 67 43

55 37 “6”=36h 54 36

56 38 “0”=30h 48 30

57 39 “0”=30h 48 30

58 3A “-”=2Dh 45 2D

59 3B “4”=34h 52 34

60 3C “8”=38h 56 38

61 3D “H”=48h 72 48

62 3E “-”=2Dh 45 2D

63 3F “9”=39h 57 39

64 40 “P”=50h 80 50

65 41 Space=20h 32 20

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 99

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

66 42 PRODUCT PART/MODEL NUMBER Type/Length (Cah)

Type = “ASCII+LATIN1” = (11)b Length = 10 Bytes = (001010)b

202 CA

67

68

69

70

71

72

73

74

75

76

43

44

45

46

47

48

49

4A

4B

4C

Reserved

0

00

77 4D PRODUCT VERSION NUMBER Type/Length (C2h)

Type = “ASCII+LATIN1” = (11)b Length = 2 bytes = (000010)b

194 C2

PRODUCT VERSION NUMBER BYTES

Refer to BOM TLA for latest revision

78 4E “A” 65 41

79 4F “A” 65 41

80 50

PRODUCT SERIAL NUMBER Type/Length

Type = “ASCII+LATIN1” = (11)b Length = 13 bytes = (001101)b 205 CD

PRODUCT SERIAL NUMBER BYTES

Model ID = “K897”

81 51 “K”= 4Bh 75 4B

82 52 “8”= 38h 56 38

83 53 “9”= 39h 57 39

84 54 “7”= 37h 55 37

MANUFACTURING YEAR AND WEEK CODE (PER UNIT)

85 55 “W” 87 57

86 56 “W” 87 57

87

88

89

90

57

58

59

5A

UNIQUE SERIAL NUMBER (PER UNIT)

“SSSS”

In Decimal = 083, 083, 083, 083

In Hex = 53H, 53H, 53H, 53H

83

53

MODEL REVISION (PER UNIT)

Artesyn Model Rev, See Latest Model Rev in BOM TLA for latest revision

91 5B “A” 65 41

92 5C “A” 65 41

93 5D “P” = 50H, (For Laguna, Philippines) MANUFACTURING LOCATION (PER UNIT) 80 50

94 5E End Tag In Decimal: 193 In Hex: 0C1H 193 C1

95 5F Reserved 0 00

96 60 Reserved 0 00

97 61 Reserved 0 00

98 62 Reserved 0 00

99 63 Reserved 0 00

100 64 Reserved 0 00

101 65 Reserved 0 00

102 66 Reserved 0 00

103 67 Zero Check Sum (256-(Sum of bytes 28h to 67h) (PER UNIT) 58 3A

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 100

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

MULTI RECORD AREA

104 68 Power Supply Record Header (72 Bytes)

Record Type ID (0x00 = Power Supply Information) 0 00

105 69 3-0: (0010)b, Record Format Version 2 02

106 6A Record Length: 24 Bytes 24 18

107 6B Record Checksum (Zero Checksum From 109d To 132d ) 197 C5

108 6C Header Checksum (Zero Checksum From 104d To 107d) 33 21

POWER SUPPLY RECORD

109 6D Overall Capacity of the Power Supply,

15-12: (0000)b, Reserved

11-0: (000111001000)b, 600W = 0258H

88 58

110 6E 2 02

111 6F 15-12: (0000)b, Reserved

11-0: (001000011100)b, 650W = 028AH

138 8A

112 70 2 02

113 71 Inrush Current (Amps) 25 19

114 72 Inrush Interval, 200mS 200 C8

115

116

73

74

Low End Input Voltage Range 1(10mV)

(180V / 10mV) 18000 = 4650H, 2 Bytes Sequence

80

70

50

46

117

118

75

76

High End Input Voltage Range 1(10mV),

(305V/10mV) 30500= 7724H, 2 Bytes Sequence

36

119

24

77

119

120

77

78

Low End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

121

122

79

7A

High End Input Voltage Range 2(10mV)

Not Applicable

(Autoswitch)

0

00

123 7B Low End Input Frequency Range, 47Hz = 2FH 47 2F

124 7C Low End Input Frequency Range, 63Hz = 3FH 63 3F

125 7D AC Dropout Tolerance in ms, 20mS= 14H 20 14

126 7E Binary Flags,

15-11: (10100)b, Hold up Time in Seconds = 14H

10-0: (01001011000)b, Peak Capacity in Watts =258H

38 26

127 7F 88 58

162 A2

128 80

129 81 Byte 1 : Bits7-4 ; Voltage 1 Bits3-0 : Voltage2

Byte 2 and Byte 3: Total Combined Wattage

Stored with LSB first then MSB. Not Appllicable

0 00

130 82

0 00

131 83

132 84 Predictive Fail Tachometer Lower Threshold, Not applicable 0 00

48V DC OUTPUT RECORD HEADER

133 85 Record Type ID (0x01 = DC Output) 1 01

134 86 End Of List/Record Format Version Number 2 02

135 87 Record Length: 13 Bytes 13 0D

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 101

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

136 88 Record Checksum (Zero Checksum From 138d To 150d ) 248 F8

137 89 Header Checksum (Zero Checksum From 133d To 136d ) 248 F8

48V OUTPUT RECORD

138 8A Output Information, 001 = 01H, +48V Output Information 1 01

139 8B Nominal Voltage

48.00V = 4800 (x10mV) = 12C0H

192 C0

140 8C 18 12

141 8D Maximum Negative Voltage Deviation

44.00V = 4400 (x10mV) = 1130H, 2 Bytes Sequence

48 30

142 8E 17 11

143 8F Maximum Positive Voltage Deviation

54.00V = 5400 (x10mV) = 1518H, 2 Bytes Sequence

24 18

144 90 21 15

145 91 Ripple and Noise pk-pk (mV)

480mV (x 1mV)= 01E0H, 2 Bytes Sequence

224 E0

146 92 1 01

147 93 Minimum Current Draw (10mA)

0000 = 0000H, 2 Bytes Sequence

0 00

148 94 0 00

149 95 Minimum Current Draw (10mA), 0000 = 0000H

12.50A = 1250(x10mA) = 04E2H

226 E2

150 96 4 04

5VSB OUTPUT RECORD HEADER

151

152

153

154

155

97

98

99

9A

9B

Record type ID (0x01 = DC Output)

End of List /Record Format Version Number for 5VSB Output Record

Record Length: 13 Bytes

Record CHECKSUM of 5VSB Output Record (Zero CHECKSUM)

(256-(sum of bytes 156 to 168)

Header CHECKSUM of 5VSB Output Record Header (Zero CHECKSUM)

(256-(sum of bytes 151 to 154)

1

2

13

214

26

01

02

0D

D6

1A

156 9C

Output Information, 002 = 02H

Bit 7: Standby Information = 1B

Bits 6-4: Reserved, Write as 000B

Bits 3-0: Output Number 2 = 010B

130 82

157 9D Nominal Voltage

5.00V = 2500(x10mA) = 01F4H, 2 Bytes Sequence

244 F4

158 9E 1 01

159 9F Maximum Negative Voltage Deviation

4.75V = 525 (x10mV) = 01DBH, 2 Bytes Sequence

219 DB

160 A0 1 01

161 A1 Maximum Positive Voltage Deviation

5.25V = 525(x10mA) = 020DH, 2 Bytes Sequence

13 0D

162 A2 2 02

163 A3 Ripple And Noise pk-pk (mV)

50mV = 0032H, 2 Bytes Sequence

50 32

164 A4 0 00

165 A5 Minimum Current Draw (10mA)

0000 = 000AH, 2 Bytes Sequence

0 00

166 A6 0 00

167 A7 Maximum Current Draw (10mA), (6.0A / 10mA) 600 = 0258H

0150 = 0096H, 2 Bytes Sequence

150 96

168 A8 0 00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 102

LCC600-48H-9P FRU (EEPROM) Data:

OFFSET DEFINITION SPEC VALUE

(DEC) (HEX) (REMARKS) (DEC) (HEX)

OEM RECORD HEADER

169

170

A9

AA

Record type = C0H for OEM Record

End of List /Record Format Version Number for 5V VSB output Record

192

130

C0

82

171

172

173

AB

AC

AD

Record Length of OEM Record

Record CHECKSUM of OEM Record (Zero CHECKSUM)

Header CHECKSUM of OEM Record Header (Zero CHECKSUM)

(256-(sum of bytes 169 to 172)

42

0

148

2A

00

94

OEM RECORD

174 AE Manufacturer ID (3 bytes, Default is 0) 0 00

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

AF

B0

B1

B2

B3

B4

B5

B6

B7

B8

B9

BA

BB

BC

BD

BE

BF

C0

C1

C2

C3

C4

C5

C6

C7

C8

C9

CA

CB

CC

CD

CE

CF

D0

D1

D2

D3

D4

D5

D6

D7

RESERVED

0

00

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 103

PMBusTM Interface Support

The LCC600 series is compliant with the industry standard PMBusTM protocol for monitoring and control of the power

supply via the I2C interface port.

LCC600 Series PMBusTM General Instructions

Equipment Setup

The following is typical I2C communication setup:

PMBusTM Writing Instructions

When writing to any PMBusTM R/W registers, ALWAYS do the following:

Disable Write Protect (command 10h) by writing any of the following accordingly:

Levels: 00h – Enable writing to all writeable commends

20h – Disables write except 10h, 01h, 00h, 02h and 21h commands

40h – Disables write except 10h, 01h, and 00h commends

80h – Disable write except 0x00h

.

Voltmeter

LCC600

Series

I2C Master I2C Adaptor E-Load

AC Source

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 104

LCC600 series Support PMBusTM Command List

The LCC600 series is compliant with the industry standard PMBusTM protocol for monitoring and control of the power

supply via the I2C interface port.

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value Access

Type1

Data

Bytes

Data

Format

Description

00h PAGE 00h R 1 Hex

01h OPERATION 80h R/W 1 Bitmap

ped

Used to turn the unit ON/OFF in conjunction

with the input CONTROL pin.

b7:6

7 - Unit ON

6 - Soft Off

10b 00 - INVALID INPUT

01 - PSU OFF

10 - PSU ON (Default)

11 - INVALID INPUT

b5:4

5 - Margin High

4 - Margin Low

00b 00 - VALID INPUT (Default)

b3:2

3 - Margin Act on Fault

2 - Margin Ignore Fault

00b 00 - VALID INPUT (Default)

b1:0 Reserved 00b 00 - VALID INPUT (Default)

02h ON_OFF_CONFIG 1Eh R 1 Bitmap

ped

Configures the combination of CONTROL pin

and serial communication commands needed to

turn the unit ON/OFF.

b7:5 00b Default

b4 - Control pin and Serial

communication control

1 1 - Unit powers up as dictated by CONTROL pin

and OPERATION command

b3 - Serial communication

Control

1 1 - Enables Serial communication ON/OFF

portion of OPERATION command.

Requires CONTROL pin to be asserted for the

unit to start and energize the output.

b2 - Control pin 1 1 - Unit requires CONTROL pin to be asserted

to start the unit.

b1 - Control pin polarity 0 1 - Active high (Pull high to start the unit).

b0 - Control pin action 0 0 - Use programmed turn ON/OFF delay

03h CLEAR_FAULTS N/A S 1 N/A

10h WRITE_PROTECT 80h R/W 1 Bitmap

ped

Used to Control Writing to the PMBus Device

80h - Disables write except 10h

40h - Disables write except 10h, 01h, 00h

20h - Disables write except 10h,01h,00h,02h

and 21h commands

00 - Enables write to all writeable commands.

20h VOUT_MODE 17h R 1 N/A Specifies the mode and parameters of Output

Voltage related Data Formats

21h VOUT_COMMAND 0000 R/W 2 Linear

(VOUT)

"Sets the Output Voltage Reference Vout

command sends discreet value to change

output voltage“

Note: that setpoint will not work once vout

command is set. To enablle setpoint again write

0 value.

LCC600-12 Default: 12V Min: 12V Max: 15V

LCC600-28 Default: 28V Min: 24V Max: 30V

LCC600-36 Default: 36V Min: 32V Max: 38V

LCC600-48 Default: 48V Min: 44V Max: 54V

Note 1 - Access Type: “S”: Send Byte. “R”: Read. “W”: Write. “R/W”: Read/Write

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 105

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format

Description

35h VIN_ON EAB8 R 2 Linear Sets the value of input, in volts, at which the

unit should start. AC GOOD

LCC600-12U Default: 87Vac

LCC600-12H Default: 175Vac

LCC600-28U Default: 87Vac

LCC600-28H Default: 175Vac

LCC600-36U Default: 87Vac

LCC600-36H Default: 175Vac

LCC600-48U Default: 87Vac

LCC600-48H Default: 175Vac

36h VIN_OFF EA88 R 2 Linear Sets the value of input, in volts, at which the

unit should stop power conversion. AC BAD

LCC600-12U Default: 81Vac

LCC600-12H Default: 165Vac

LCC600-28U Default: 81Vac

LCC600-28H Default: 165Vac

LCC600-36U Default: 81Vac

LCC600-36H Default: 165Vac

LCC600-48U Default: 81Vac

LCC600-48H Default: 165Vac

40h VOUT_OV_FAULT_LIMIT 7A00 R 2 Linear LCC600-12 Default: 15.6V, 128%-132% of

output Voltage

LCC600-28 Default: 36.4V, 128%-132% of

output Voltage

LCC600-36 Default: 47V, 128%-132% of output

Voltage

LCC600-48 Default: 61V, 125%-129% of output

Voltage

42h VOUT_OV_WARN_LIMIT 7200 R 2 Linear LCC600-12 Default: 13V, 108%-112% of output

Voltage

LCC600-28 Default: 31V, 108%-112% of output

Voltage

LCC600-36 Default: 40V, 108%-112% of output

Voltage

LCC600-48 Default: 57V, 116%-120% of output

Voltage

43h VOUT_UV_WARN_LIMIT 5600 R 2 Linear LCC600-12 Default: 10V, 80%-84% of output

Voltage

LCC600-28 Default: 23V, 80%-84% of output

Voltage

LCC600-36 Default: 30V, 80%-84% of output

Voltage

LCC600-48 Default: 43V, 87%-91% of output

Voltage

44h VOUT_UV_FAULT_LIMIT 500A R 2 Linear LCC600-12 Default: 9V, 73%-77% of output

Voltage

LCC600-28 Default: 21V, 73%-77% of output

Voltage

LCC600-36 Default: 27V, 73%-77% of output

Voltage

LCC600-48 Default: 40V, 81%-85% of output

Voltage

46h IOUT_OC_FAULT_LIMIT DB40 R 2 Linear LCC600-12 Default: 60A, 119%-123% of

output Voltage

LCC600-28 Default: 26A, 119%-123% of

output Voltage

LCC600-36 Default: 20A, 119%-123% of

output Voltage

LCC600-48 Default: 14.5A, 114%-118% of

output Voltage

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 106

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format

Description

4Ah IOUT_OC_WARN_LIMIT DAE0 R 2 Linear LCC600-12 Default: 53.5A, 105%-109% of

rated output current

LCC600-28 Default: 23A, 105%-109% of rated

output current

LCC600-36 Default: 18A, 105%-109% of rated

output current

LCC600-48 Default: 13.5A, 106%-110% of

rated output current

4Fh OT_FAULT_LIMIT EAB8 R 2 Linear Secondary ambient temperature Fault threshold,

in degree C. (87degC)

51h OT_WARN_LIMIT EAB0 R 2 Linear Secondary ambient temperature warning

threshold, in degree C. Operating limit. refer to

section 3.1. (86degC)

58h VIN_UV_WARN_LIMIT EAB0 R/W 2 Linear LCC600-12U Default: 86Vac

LCC600-12H Default: 175Vac

LCC600-28U Default: 86Vac

LCC600-28H Default: 175Vac

LCC600-36U Default: 86Vac

LCC600-36H Default: 175Vac

LCC600-48U Default: 86Vac

LCC600-48H Default: 175Vac

59h VIN_UV_FAULT_LIMIT EA88 R 2 Linear LCC600-12U Default: 81Vac

LCC600-12H Default: 170Vac

LCC600-28U Default: 81Vac

LCC600-28H Default: 170Vac

LCC600-36U Default: 81Vac

LCC600-36H Default: 170Vac

LCC600-48U Default: 81Vac

LCC600-48H Default: 170Vac

6Ah POUT_OP_WARN_LIMIT 0262 R 2 Linear Default

78h STATUS_BYTE 00 R 1 Bitmap

ped

PMBUs status bits that are supported in the

different status registers

b7 - BUSY Not support

b6 - OFF Unit is OFF

b5 - VOUT_OV Output over-voltage fault has occurred

b4 - IOUT_OC Output over-current fault has occurred

b3 - VIN_UV An input under--voltage fault has occurred

b2 - TEMPERATURE A temperature fault or warning has occurred

b1 - CML A communication, memory or logic fault has

occurred.

b0 - NONE OF THE ABOVE Not support

79h STATUS_WORD 0000 R 2 Bitmap

ped

PMBUs status bits that are supported in the

different status registers

b15 - VOUT An output voltage fault or warning has occurred

b14 - IOUT/POUT An Output current or power fault or warning has

occurred.

b13 - INPUT An input voltage, current or power fault or

warning as occurred.

b12 - MFR Not support

b11 - POWER_GOOD# The POWER_GOOD signal is de-asserted

b10 - FANS Not support

b9 - OTHER Not support

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 107

LCC600 series Supported PMBusTM Command List:

Command

Code Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format Description

79h b8 - UKNOWN Not support

b7 - BUSY Not support

b6 - OFF Unit is OFF

b5 - VOUT_OV Output over-voltage fault has occurred

b4 - IOUT_OC Output over-current fault has occurred

b3 - VIN_UV An input under-voltage fault has occurred

b2 - TEMPERATURE A temperature fault or warning has occurred

b1 - CML A communication, memory or logic fault has

occurred.

b0 - NONE_OF_THE_ABOVE Not support

7Ah STATUS_VOUT 00 R/W 1 Bitmap

ped

Output voltage related faults

b7 - VOUT_OV_FAULT VOUT Over--voltage Fault

b6 - VOUT_OV_LV_FAULT VOUT Over-voltage warning

b5 - VOUT_UV_WARNING VOUT Under-voltage Warning

b4 - VOUT_UV_FAULT VOUT Under-voltage Fault

b3 - VOUT_MAX Warning Not support

b2 - TON_MAX_FAULT TON_MAX_FAULT

b1 - TOFF_MAX_WARNING Not support

b0 - VOUT Tracking Error Not support

7Bh STATUS_IOUT 00 R/W 1 Bitmap

ped

Output current related faults

b7 - IOUT_OC_FAULT IOUT Over current Fault

b6 - IOUT_OC_LV_FAULT Not support

b5 - IOUT_OC_WARNING IOUT Overcurrent Warning

b4 - IOUT_UC_FAULT Not support

b3 - Current Share Fault Not support

b2 - In Power Limiting Mode Not support

b1 - POUT_OP_FAULT Not support

b0 - POUT_OP_WARNING POUT Overpower Warning

7Ch STATUS_INPUT 00 R/W 1 Bitmap

ped

Input related faults and warnings

b7 - VIN_OV_FAULT VIN Overvoltage Fault

b6 - VIN_OV_WARNING VIN Overvoltge Warning

b5 - VIN_UV_WARNING VIN Undervoltage Warning

b4 - VIN_UV_FAULT VIN Undervoltage Fault

b3 - Unit Off For Insufficient

Input Voltage

Absence of or no input condition (not UV)

b2 - IIN_OC_FAULT Not support

b1 - IIN_OC_WARNING Not support

b0 - PIN_OP_WARNING Not support

7Dh STATUS_TEMPERATURE 00 R/W 1 Bitmap

ped

Temperature related faults and warnings

b7 - OT_FAULT Overtemperature Fault

b6 - OT_WARNING Overtemperature Warning

b5 - UT_WARNING Not support

b4 - UT_FAULT Not support

b3 : 0 Not support

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 108

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format

Description

7Eh STATUS_CML 00 R/W 1 Bitmap

ped

Communications, Logic and Memory

b7 - Invalid Or Unsupported

Command Received

The following conditions shall also assert this

flag: - A write transaction on read only

commands - A write transaction on a password

protected command that is still locked

b6 - Invalid Or Unsupported

Data Received

Packet Error Check Failed

b5 - Packet Error Check Failed Memory Fault Detect, CRC Error

b4 - Memory Fault Detected [1] Memory Fault Detect, CRC Error

b3 - Processor Fault Detected [2] Not support

b2 - Reserved Not support

b1 - A communication fault other

than the ones listed in this

table has occurred

Not support

b0 - Other Memory Or Logic

Fault has occurred. [3]

Not support

80h STATUS_MFR_SPECIFIC 00 R/W 1 Bitmap

ped

Manufacturer Status codes

88h READ_VIN - R 2 Linear Returns input Voltage in Volts ac.

8Bh READ_VOUT - R 2 Linear Returns the actual, measured voltage in Volts.

8Ch READ_IOUT - R 2 Linear Returns the output current in amperes.

8Dh1READ_TEMPERATURE1

(SEC_AMB)

- R 2 Linear Secondary Hotspot

8Eh2READ_TEMPERATURE2

(SEC_AMB)

- R 2 Linear Primary Hotspot

8Fh3READ_TEMPERATURE3

(SEC_AMB)

- R 2 Linear Primary Hotspot

96h READ_POUT - R 2 Linear Returns the output power, in Watts.

98h PMBUS_REVISION 22h R 1 Linear Reads the PMBus revision number

99h MFR_ID 4E,59,53,45,54,5

2,41,7

R 7 ASCII ARTESYN

9Ah MFR_MODEL 4C,43,43,36,30,3

0,2D,32,38,55,2D

,39,50,20

R/W 14 ASCII Default Value:

“LCC600-12U-4P” “LCC600-12U-9P”

“LCC600-12H-4P” “LCC600-12H-9P”

“LCC600-28U-4P” “LCC600-28U-9P”

“LCC600-28H-4P” “LCC600-28H-9P”

“LCC600-36U-4P” “LCC600-36U-9P”

“LCC600-36H-4P” “LCC600-36H-9P”

“LCC600-48U-4P” “LCC600-48U-9P”

“LCC600-48H-4P” “LCC600-48H-9P”

9Bh MFR_REVISION - R 2 ASCII Default: Default value should be BOM TLA (can

be found on serial number).

9Ch MFR_LOCATION - R 11 ASCII Default: “Philippines”

Note 1 - 8Dh: Maximum allowed temperature is 111 OC. And cold temperature read out limitation is -10 OC.

Note 2 - 8Eh: Maximum allowed temperature is 124 OC. And cold temperature read out limitation is -10 OC.

Note 3 - 8Fh: Maximum allowed temperature is 101 OC. And cold temperature read out limitation is -10 OC.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 109

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format

Description

9Dh MFR_DATE - R/W 6 ASCII Manufacture Date, ASCII format

structure : YYMMDD

9Eh MFR_SERIAL - R/W Varies ASCII LCC600-12U-9P Default “L477WWSSSSAAP”

LCC600-12U-4P Default “L478WWSSSSAAP”

LCC600-12H-9P Default “L479WWSSSSAAP”

LCC600-12H-4P Default “L480WWSSSSAAP”

LCC600-28U-9P Default “K618WWSSSSAAP”

LCC600-28U-4P Default “K619WWSSSSAAP”

LCC600-28H-9P Default “K620WWSSSSAAP”

LCC600-28H-4P Default “K621WWSSSSAAP”

LCC600-36U-9P Default “L291WWSSSSAAP”

LCC600-36U-4P Default “L292WWSSSSAAP”

LCC600-36H-9P Default “L293WWSSSSAAP”

LCC600-36H-4P Default “L295WWSSSSAAP”

LCC600-48U-9P Default “K895WWSSSSAAP”

LCC600-48U-4P Default “K896WWSSSSAAP”

LCC600-48U-9P Default “K897WWSSSSAAP”

LCC600-48U-4P Default “K898WWSSSSAAP”

A0h MFR_VIN_MIN EAD0 R 2 Linear Minimum Input Voltage

LCC600-12U Default: 90Vac

LCC600-12H Default: 180Vac

LCC600-28U Default: 90Vac

LCC600-28H Default: 180Vac

LCC600-36U Default: 90Vac

LCC600-36H Default: 180Vac

LCC600-48U Default: 90Vac

LCC600-48H Default: 180Vac

A1h MFR_VIN_MAX FA10 R 2 Linear Maximum Input Voltage

LCC600-12U Default: 264Vac

LCC600-12H Default: 305Vac

LCC600-28U Default: 264Vac

LCC600-28H Default: 305Vac

LCC600-36U Default: 264Vac

LCC600-36H Default: 305Vac

LCC600-48U Default: 264Vac

LCC600-48H Default: 305Vac

A2h MFR_IIN_MAX D20 R 2 Linear Maximum Input Current (8A)

A3h MFR_PIN_MAX 294 R 2 Linear Maximum Input Power (660W)

A4h MFR_VOUT_MIN 300 R 2 Linear Minimum Output Voltage

LCC600-12 Default: 12V

LCC600-28 Default: 24V

LCC600-36 Default: 32V

LCC600-48 Default: 44V

A5h MFR_VOUT_MAX 3C0 R 2 Linear Maximum Output Voltage

LCC600-12 Default: 15V

LCC600-28 Default: 30V

LCC600-36 Default: 38V

LCC600-48 Default: 54V

A6h MFR_IOUT_MAX DB20 R 2 Linear Maximum Output Current

LCC600-12 Default: 50A

LCC600-28 Default: 21.5A

LCC600-36 Default: 16.7A

LCC600-48 Default: 12.5A

A7h MFR_POUT_MAX 258 R 2 Linear Maximum Output Power (600W)

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 110

LCC600 series Supported PMBusTM Command List:

Command

Code

Command Name Default Value

(HEX)

Access

Type

Data

Bytes

Data

Format

Description

A8h MFR_TAMBIENT_MAX E320 R 2 Linear Maximum Operating Ambient Temperature

(Secondary Ambient) (50 degC)

A9h MFR_TAMBIENT_MIN DD80 R 2 Linear Minimum Operating Ambient Temperature

(Secondary Ambient) (-20 degC)

AAh MFR_EFFICIENCY_LL - R 14 Linear

ABh MFR_EFFICIENCY_HL - R 14 Linear

E0h FW_PRI_VERSION - R 8 ASCII Varies

E1h FW_SEC_VERSION - R 8 ASCII Varies

F1h ISP_UNLOCK_CODE - R/W 4 ASCII Command available in ISP Mode

F2h ISP_CTRL_CMD - W 1 Bitmap

ped

Command available in ISP Mode

F3h ISP_STATUS_BYTE - R 1 Bitmap

ped

Command available in ISP Mode

F4h ISP_FLASH_ADDR - R/W 4 Raw Command available in ISP Mode

F5h ISP_FLASH_DATA - R/W 4 Raw Command available in ISP Mode

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 111

Application Notes

Current Sharing

The LCC600 series main output V1 is equipped with current sharing capability. This will allow up to 5 power supplies to be

connected in parallel for higher power application. Current share accuracy is typically 10% of full load. The I2C Line should

be connected separately when the number of units in parallel is more than 5.

The table below shows the rated Maximum Power capacity when units are in parallel configuration. This is to consider the

10% load sharing tolerance. Max load during start-up in parallel operation is limited to 600W (max power of one supply).

The PSU will have an active load sharing percentage as shown below.

Number of Units in

Parallel (N)

Maximum Output power

Rated + [(N-1) x 0.8] x Rated, Where: Rated – 600W, N

– Number of PSU in Parallel

Stand-alone 600W

2 1080W

3 1560W

4 2040W

5 2520W

Rail Loading (%) Sharing Percent Error(%)

25% 30%

50% 15%

75% 15%

100% 10%

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 112

Internal Temperature Sensors

The outlined temperature reading by universal PMBUS GUI below shows the internal temperature sensors in the power

supply and detail reading values of these sensors. Also the limitations presented to know if the temperature still allowed.

8Dh – Internal secondary output hotspot (near baseplate): Ref as OUTPUT

8Eh – Internal primary hotspot (at FET heatsink): Ref as HEATSINK

8Fh – Internal primary input hotspot (near baseplate): Ref as INPUT

8Dh – Maximum allowed temperature is 111 OC. And cold temperature read out limitation is -10 OC.

8Eh – Maximum allowed temperature is 124 OC. And cold temperature read out limitation is -10 OC.

8Fh – Maximum allowed temperature is 101 OC. And cold temperature read out limitation is -10 OC.

Note - Maximum temperature sensor readings above indicates 87 degC on baseplate center point which is maximum allowed as

baseplate hot spot.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 113

Output Ripple and Noise Measurement

The setup outlined in the diagram below has been used for output voltage ripple and noise measurements

on the.

LCC600 series when measuring output ripple and noise, a scope jack in parallel with a 0.1uF ceramic chip capacitor, and a

10 uF aluminum electrolytic capacitor should be used. Oscilloscope should be set to 20 MHz bandwidth for this

measurement.

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 114

Accessories

Orderable Part

Number Description Diagram

70-841-030

For Suffix "-9P" AC Input Mating

Connector Cable Assembly

(with 0.3 m wire length)

73-788-001

J1501 (20 Pin Control Signal)

Mating Connector with 0.3 m

wires attached for "-9P" suffix

70-841-031 Pre-Cut thermal insulator (Laird

TFLEX HR220FG)

700-014447-0000

MIL-STD-461F AC input In-line

EMI filter (Zhongguang ZGLPG-

10-02M)

73-769-002 USB to I2C High Speed Adaptor

for PMBus Communication

750-007213-0000

J1501 (20 Pin) Mating connector

with 10 Pin header termination

for use with 73-769-002

466-003103-0000

Test Heatsink for unit

characterization. Size: 331 x

220 x 69 mm; Aluminum with

natural finish; Weight = 1.7 kgs

Technical Reference Note

Artesyn Embedded Technologies

Rev.03.23.18_#2.4

LCC600 series

Page 115

Record of Revision and Changes

Issue Date Description Originators

1.2 07.08.2015

Add WP pin description on page 36, delete the spare pin

description, update error in slot ID digits, add SGND in the circuit

on page 36, define “S” as send bytes.

K. Wang

1.3 09.10.2015 Add 48V and 28H. K. Zou

1.4 11.24.2015

Update the command List 40h,42h,43h,44h the default value as

7A00,7200,5600,500A. And update the issue per design

comment.

K. Zou

1.5 09.08.2016 Add 12V and 36V and update some issue. D. Hou

1.6 10.26.2016 Add part number LCC600-28U-9P24.

Add Dimming function. And add the Accessories page. D. Hou

1.7 12.23.2016

Indicate the word “Qualification” besides the “Isolation Voltage”

wording in the table

indicate the word “Qualification” besides the “Isolation Voltage”

wording in the table

Update the OTP in table 3

K. Wang

1.8 02.24.2017 Add ‘OR-ing FET’ on first page. D. Hou

1.9 04.07.2017 Update the address part A2,A1,A0 K. Wang

2.0 04.27.2017 Update the leakage current K. Wang

2.1 07.12.2017 Update the leakage current D. Hou

2.2 08.17.2017 Update the “ISHARE” pin description D. Hou

2.3 08.24.2017 Add note of 8Dh,8Eh,8Fh cold temperature read out limit -10 OC D. Hou

2.4 03.23.2018 Add a baseplate temperature location picture in page44 K. Wang