S 2a2b/3a1b/4a 4 A polarized power relay FEATURES 1. Compact with high sensitivity The high-efficiency polarized electromagnetic circuits of the 4-gap balanced armature and our exclusive spring alignment method achieves, with high-sensitivity in a small package, a relay that can be directly controlled by a driver chip. 2. Strong resistance to vibration and shock Use of 4G-BA technology realizes strong resistance to vibration and shock. 3. High reliability and long life Our application of 4G-BA technology, along with almost perfectly complete twin contact, ensures minimal contact bounce and high reliability. 4. Ability to provide wide-ranging control Use of 4G-BA technology with goldclad silver alloy contacts in a twin contact structure enables control across a broad range from microcurrents of 100 A 100 mV DC to 4 A 250 V AC. 5. Latching types available With 4G-BA technology, as well as single side stable types, convenient 2 coil latching types for circuit memory applications are also available. 6. Wide variety of contact formations available The compact size of the 4G-BA mechanism enables the provision of many kinds of package, including 2a2b, 3a1b, and 4a. These meet your needs across a broad range of applications. S RELAYS 7. Low thermal electromotive force relay High sensitivity (low power consumption) is realized by 4G-BA technology. Separation of the coil and spring sections has resulted in a relay with extremely low levels of thermal electromotive force (approx. 0.3 V). 8. DIL terminal array Deployed to fit a 2.54 mm .100 inch grid, the terminals are presented in DIL arrays which match the printed circuit board terminal patterns commonly in international use. 9. Relays that push the boundaries of relay efficiency High-density S relays take you close to the limits of relay efficiency. 10.Sockets are available. TYPICAL APPLICATIONS Telecommunications equipment, data processing equipment, facsimiles, alarm equipment, measuring equipment. 4-GAP BALANCED ARMATURE MECHANISM 1. Armature mechanism has excellent resistance to vibration and shock The armature structure enables free rotation around the armature center of gravity. Because the mass is maintained in balance at the fulcrum of the axis of rotation, large rotational forces do not occur even if acceleration is applied along any vector. The mechanism has proven to have excellent resistance to vibration and shock. All our S relays are based on this balanced armature mechanism, which is able to further provide many other characteristics. 2. High sensitivity and reliability provided by 4-gap balanced armature mechanism As a (polarized) balanced armature, the S relay armature itself has two permanent magnets. Presenting four interfaces, the armature has a 4-gap structure. As a result, the rotational axis at either end of the armature is symmetrical and, in an energized into a polarized state, the twin magnetic armature interfaces are subject to repulsion on one side and attraction on the other. This mechanism, exclusive to Panasonic, provides a highly efficient polarized magnetic circuit structure that is both highly sensitive and has a small form factor. Moreover, suitability for provision with many types of contact array and other advantages promise to make it possible to provide many of the various characteristics that are coming to be demanded of relays. HOW IT WORKS (single side stable type) 1) When current is passed through the coil, the yoke becomes magnetic and polarized. 2) At either pole of the armature, repulsion on one side and attraction on the other side is caused by the interaction of the poles and the permanent magnets of the armature. ds_61A07_en_s: 030413D 3) At this time, opening and closing operates owing to the action of the simultaneously moulded balanced armature mechanism, so that when the force of the contact breaker spring closes the contact on one side, on the other side, the balanced armature opens the contact (2a2b). Repulsion Permanent magnet N Attraction N Residual plate S N Attraction S S Axis Repulsion 1 S ORDERING INFORMATION S Contact arrangement 2: 2 Form A 2 Form B 3: 3 Form A 1 Form B 4: 4 Form A Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Coil voltage (DC) 3, 5, 6, 12, 24, 48 V Note: UL/CSA approved type is standard. TYPES Contact arrangement 2 Form A 2 Form B 3 Form A 1 Form B 4 Form A Nominal coil voltage 3V DC 5V DC 6V DC 12V DC 24V DC 48V DC 3V DC 5V DC 6V DC 12V DC 24V DC 48V DC 3V DC 5V DC 6V DC 12V DC 24V DC 48V DC Single side stable Part No. S2-3V S2-5V S2-6V S2-12V S2-24V S2-48V S3-3V S3-5V S3-6V S3-12V S3-24V S3-48V S4-3V S4-5V S4-6V S4-12V S4-24V S4-48V 1 coil latching Part No. S2-L-3V S2-L-5V S2-L-6V S2-L-12V S2-L-24V S2-L-48V S3-L-3V S3-L-5V S3-L-6V S3-L-12V S3-L-24V S3-L-48V S4-L-3V S4-L-5V S4-L-6V S4-L-12V S4-L-24V S4-L2-48V 2 coil latching Part No. S2-L2-3V S2-L2-5V S2-L2-6V S2-L2-12V S2-L2-24V S2-L2-48V S3-L2-3V S3-L2-5V S3-L2-6V S3-L2-12V S3-L2-24V S3-L2-48V S4-L2-3V S4-L2-5V S4-L2-6V S4-L2-12V S4-L2-24V S4-L2-48V Standard packing: Tube: 50 pcs.; Case: 500 pcs. RATING 1. Coil data 1) Single side stable Type Nominal coil voltage Standard 3V DC 5V DC 6V DC 12V DC 24V DC 48V DC Pick-up Drop-out voltage voltage (at 20C 68F) (at 20C 68F) 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Nominal operating current [10%] (at 20C 68F) 66.7mA 38.5mA 33.3mA 16.7mA 8.4mA 5.6mA Coil resistance [10%] (at 20C 68F) 45 130 180 720 2,850 8,500 Nominal operating current [10%] (at 20C 68F) 33mA 16mA 16mA 8mA 4mA 3mA Coil resistance [10%] (at 20C 68F) 90 300 360 1450 5,700 16,000 Nominal operating power Coil inductance 200mW 192mW 200mW 200mW 202mW 271mW Approx. 23mH Approx. 65mH Approx. 93mH Approx. 370mH Approx. 1,427mH Approx. 3,410mH Nominal operating power Coil inductance 99mW 80mW 96mW 96mW 96mW 144mW Approx. 0.04mH Approx. 0.14mH Approx. 0.14mH Approx. 0.6mH Approx. 2.05mH Approx. 8.9mH Max. allowable voltage (at 40C 104F) 5.5V DC 9.0V DC 11.0V DC 22.0V DC 44.0V DC 75.0V DC 2) 1 coil latching 2 Type Nominal coil voltage Standard 3V DC 5V DC 6V DC 12V DC 24V DC 48V DC Pick-up Drop-out voltage voltage (at 20C 68F) (at 20C 68F) 70%V or less of nominal voltage (Initial) 10%V or more of nominal voltage (Initial) Max. allowable voltage (at 40C 104F) 8.4V DC 15.3V DC 16.8V DC 33.7V DC 66.7V DC 111V DC ds_61A07_en_s: 030413D S 3) 2 coil latching Type Nominal coil voltage Set voltage Reset voltage (at 20C 68F) (at 20C 68F) Nominal operating current [10%] (at 20C 68F) Reset Set coil coil Coil resistance [10%] (at 20C 68F) Reset Set coil coil Nominal operating power (at 20C 68F) Reset Set coil coil 3V DC 66.7mA 66.7mA 45 45 200mW 200mW 5V DC 38.5mA 38.5mA 130 130 192mW 192mW 33.7mA 33.7mA 180 180 200mW 200mW 16.7mA 16.7mA 720 720 200mW 200mW 24V DC 8.4mA 8.4mA 2,850 2,850 202mW 202mW 48V DC 7.4mA 7.4mA 6,500 6,500 355mW 355mW 6V DC Standard 12V DC 70%V or less of nominal voltage (Initial) 70%V or less of nominal voltage (Initial) Coil inductance Set coil Approx. 10mH Approx. 31mH Approx. 40mH Approx. 170mH Approx. 680mH Approx. 1,250mH Reset coil Approx. 10mH Approx. 31mH Approx. 40mH Approx. 170mH Approx. 680mH Approx. 1,250mH Max. allowable voltage (at 40C 104F) 5.5V DC 9.0V DC 11.0V DC 22.0V DC 44.0V DC 65.0V DC 2. Specifications Characteristics Contact Rating Item Arrangement Initial contact resistance, max. Electrostatic capacitance (initial) Contact material Thermal electromotive force (at nominal coil voltage) (initial) Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Minimum operating power Nominal operating power Min. switching capacity (Reference value)*1 Insulation resistance (Initial) Electrical characteristics Breakdown voltage (Initial) Between open contacts Between contact sets Between contact and coil Temperature rise (at 20C 68F) Operate time [Set time] (at 20C 68F) Release time [Reset time] (at 20C 68F) Mechanical characteristics Expected life Conditions Functional Destructive Functional Vibration resistance Destructive Mechanical Electrical Shock resistance Conditions for operation, transport and storage*2 Max. operating speed Unit weight Specifications 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Max. 50 m (By voltage drop 6 V DC 1A) Approx. 3pF Au clad Ag alloy (Cd free) Approx. 3V 4 A 250 V AC, 3 A 30 V DC 1,000 VA, 90 W 250 V AC, 48 V DC (30 to 48 V DC at less than 0.5 A) 4 A (AC), 3 A (DC) 100 mW (Single side stable, latching) 200 mW (Single side stable, latching) 100A 100 m V DC Min. 10,000M (at 500V DC) Measurement at same location as "Initial breakdown voltage" section. 750 Vrms for 1min. (Detection current: 10mA.) 1,000 Vrms for 1min. (Detection current: 10mA.) 1,500 Vrms for 1min. (Detection current: 10mA.) Max. 35C (By resistive method, nominal voltage applied to the coil; contact carrying current: 4A.) Max. 15 ms [15 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) Max. 10 ms [15 ms] (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.) Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) 10 to 55 Hz at double amplitude of 3 mm (Detection time: 10s.) 10 to 55 Hz at double amplitude of 4 mm Min. 108 (at 50 cps) Min. 105 (4 A 250 V AC), Min. 2105 (3 A 30 V DC) (at 20 times/min.) Ambient temperature: -55C to +65C -67F to +149F Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 times/min. for maximum load, 50 cps for low-level load (1 mA 1 V DC) Approx. 8 g .28 oz *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 Refer to "6. Usage, Storage and Transport Conditions" in AMBIENT ENVIRONMENT section in Relay Technical Information. ds_61A07_en_s: 030413D 3 S REFERENCE DATA 1. Maximum switching power 2. Life curve 3. Contact reliability Condition: 1V DC, 1mA Detection level 10 Tested Sample: S4-24V, 10pcs 1,000 99.9 99.0 95.0 1,000 DC resistive load AC resistive load 70.0 50.0 30.0 Life, x104 Contact voltage, V 500 100 100 10.0 5.0 50 30 10 10 0.1 1 0 10 2.0 1.0 0.5 125 V AC (cos = 1.0) 250 V AC (cos = 1.0) 1 2 3 4 m = 1.6 : 79 million time : 51 million time 95% reliability limit: 14.6 million times (weibul probability paper) 0.2 0.1 5 1.0 4.-(1) Coil temperature rise 4.-(2) Coil temperature rise Tested Sample: S4-24V, 4 Form A Tested Sample: S4-24V, 4 Form A 10.0 No. of operations, x10 Contact current, A Contact current, A 7 5. Operate and release time (Single side stable type) Tested Sample: S4-24V, 10pcs 90 18 80 70 4A 60 0A 50 40 80 70 60 50 40 30 30 20 20 10 10 Coil operating power, 0.2 W 0 0 0.2 0.4 0.6 0.8 1.0 Coil operating power, W Operate/release time, ms 20 90 Temperature rise, C 100 Temperature rise, C 100 1.2 1 2 3 4 5 (2) +30 (3) Release time (with diode) 10 Max. 8 Min. Operate time 6 Max. Min. 4 Max. Min. 2 Release time 0 80 100 6 120 140 Coil applied voltage, %V Note: When installing an S-relay near another, and there is no effect from an external magnetic field, be sure to leave at least 10 mm .394 inch between relays in order to achieve the performance listed in the catalog. Single side stable Drop-out voltage 0 Pick-up voltage -30 12 7. Thermal electromotive force Rate of change, % Rate of change, % (1) 14 Contact current, A 6. Influence of adjacent mounting (1) & (3) relays are energized 16 5 Inter-relay distance, mm 10 +30 2 coil latching 200 NR-H 100 0 NF relay S relay Pick-up voltage -30 5 Inter-relay distance, mm 10 2 4 6 8 Minute 10 12 Single side stable Pick-up voltage 0 Drop-out voltage Rate of change, % -30 +30 50 0 -30 Pick-up voltage 50 100 G 4 +30 Single side stable Drop-out voltage 0 Pick-up voltage -30 100 G 2 coil latching Rate of change, % +30 Rate of change, % Rate of change, % 8. Effect from an external magnetic field +30 50 100 G 2 coil latching 0 Pick-up voltage -30 50 G 100 ds_61A07_en_s: 030413D S DIMENSIONS(mm inch) CAD Data Data from our Web site. Download CAD External dimensions CAD Data Single side stable (Deenergized position) 1 1 .039 100.5 .3940.02 4 .157 0.5 .020 0.4 1.0 .016 .039 1.4 .055 3 .118 Schematic (Bottom view) 12 .472 280.5 1.1020.02 1 2 3 4 5 12 11 10 9 8 2a2b 7.62 .300 0.5 .020 General tolerance: 0.3 .012 6 1 2 3 4 5 6 + + - - - 10 9 8 7 12 11 10 9 8 7 2 3 4 5 6 1 2 3 4 5 6 + + + - - - 12 11 10 9 8 7 12 11 10 9 8 7 1 2 3 4 5 6 1 2 3 4 5 6 4a 12-1.3 dia. .047-.051 dia. 5 11 PC board pattern (Copper-side view) 12 2.54 .100 4 1 3a1b 5.08 .200 3 + 12 6 7.62 12 .472 7 .300 2 2 coil latching (Reset condition) + + + - - - 11 10 9 8 7 12 11 10 9 8 7 2.54 .100 Tolerance: 0.1 .004 SAFETY STANDARDS File No. E43028 UL/C-UL (Recognized) Contact rating 4A 250V AC, 1/20HP 125V AC (FLA1.5A) 1/20HP 250V AC (FLA0.75A), 3A 30V DC File No. LR26550 etc. CSA (Certified) Contact rating 4A 250V AC, 1/20HP 125V AC, 1/20HP 250V AC 3A 30V DC NOTES 1. Based on regulations regarding insulation distance, there is a restriction on same-channel load connections between terminals No. 2, 3 and 4, 5, as well as between No. 8, 9 and 10, 11. See the figure below for an example. 2 3 11 10 2. Please note that when this relay (1 Form A 1 Form B types) operates and releases, contacts a and b may go ON at the same time. 4 5 9 8 11 2 3 4 5 10 9 8 * Between 2, 3 and 4, 5: * Between 2, 3 and 4, 5: different channels, therefore not possible * Between 10, 11 and 8, 9: different channels, therefore not possible * Between 10, 11 and 8, 9: same channels, therefore possible same channels, therefore possible No good Good For Cautions for Use, see Relay Technical Information. ds_61A07_en_s: 030413D 5 S S RELAYS SOCKET ACCESSORIES DIMENSIONS (Unit: mm inch) PC board pattern (Copper-side view) External dimensions 12.40.6 .488.024 7.6 .299 5.085.085.085.085.08 12-1.6 dia. hole .200.200.200.200.200 12-.063 dia. hole Tolerance: 0.1 .004 18.30.6 .720.024 1.20.3 .047.012 15.50.6 .610.024 4.850.3 .191.012 1.50.3 .059.012 5.080.3 .200.012 32.40.6 1.276.024 1.50.3 .059.012 0.40.1 .016.004 3.40.3 .134.012 7.620.3 .300.012 Terminal width: 1.3 .051 Terminal thickness: 1.2 .047 General tolerance: 0.3 .012 S-PS TYPES Product name S Relays Socket Part No. S-PS SPECIFICATIONS Maximum continuous current Breakdown voltage Insulation resistance Heat resistance 4A Note: Don't insert or remove relays while in the energized condition. 1,500 Vrms between terminals More than 100 M between terminals at 500 V DC Mega 150 3C (302 5.4F) for 1 hour. NOTES Inserting and removing method Inserting method: Insert the relay as shown in Fig. 1 unit the rib of the relay snaps into the clip of the socket. Rib Fig. 1 Removing method: (1) Remove the relay straight from the socket holding the shaded portion of the relay as shown in Fig. 2. Fig. 2 (2) When sockets are mounted in close proximity, use a slotted screw driver as shown in Fig. 3. Fig. 3 6 ds_61A07_en_s: 030413D