Scale Comparison WMP(R) Interconnect Series WMP SSMP SMP SPECIFICATIONS INTRODUCTION Carlisle Interconnect Technologies WMP(R) series is designed to satisfy demand for increased package density and reduced weight in microwave systems. The sub-miniature, lightweight blind-mateable interconnect solution is ideal for complex high performance microwave modules and systems where weight is the primary issue. CarlisleIT's WMP series are a perfect solution for military radios, radars, space, and test applications. The design of the push-on interface enables use in microwave modules and dense packages, and facilitates rapid assembly and testing. The available bullet sizes allow for a PCB stackable height of <0.120". The ability to tolerate radial and axial misalignment allows for multiple engagement/disengagement cycles without degradation in electrical performance. FEATURES Frequency Range: DC - 100 GHz 50 Impedance; Blind-mateable configuration Bullet available for PCB stackable height of < 0.120" Parameter Specification Impedance 50 Frequency Range DC - 100 GHz* VSWR 1.10 : 1 to 26.5 GHz 1.25 : 1 to 65 GHz Insertion Loss .05xf (GHz) DWV @ Sea Level 250 Vrms Insulation Resistance 3500 M / min RF High Pot 150 Vrms @ 5 MHz Radial Misalignment +/- .010 inches Axial Misalignment .010 inches Temperature Range -55C to +165C Thermal Shock MIL-STD-202, Method 107, Cond B Moisture Resistance MIL-STD-202, Method 106, except step 7b Corrosion MIL-STD-202. Method 101, Cond B Vibration MIL-STD-202, Method 204, Cond D Shock MIL-STD-202, Method 213, Cond I Force to Engage MIL-STD-202 compliant Limited Detent 2.5 lbs typical Ability to withstand Radial/Axial Misalignment Smooth Bore 1.5 lbs typical Adapters, Board-mount, Field-replaceable, Bullets, and Cable Connector configurations Custom Connectors Available Force to Disengage Limited Detent 4.5 lbs typical Smooth Bore 1.0 lbs typical *Tested to 65 GHz Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703 Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com WMP (R) Configurations BULLETS CABLE CONNECTORS ADAPTERS WMP(R) Female Straight to 2.4mm Male / WP140-1CCSF WMP(R) Female to WMP(R) Female Straight Bullet / WP101-1CC PC BOARD CONNECTORS WMP (R) Male Straight Surface Mount / WP350 WMP(R) Female Straight to O .047 Semi-Rigid Cable / WP107-1CC .094 R.P. (.671) .312 Hex (Typ) R.P. .146 (.087) WMP (R) FEMALE INTERFACE .098 2.4mm MALE INTERFACE R.P. O .068 TO ACCEPT O .047 SEMI-RIGID CABLE 2X .041 .025 PCB Footprint 2X .089 R .015 TYP O .070 2X .054 O .056 O .035 O .062 2X O .063 O .100 WMP Male Straight to 2.4mm Female / WP141 .030 TYP .051 (.360) WMP (R) MALE INTERFACE (.312 HEX) 2.4mm FEMALE INTERFACE WMP(R) MALE INTERFACE (.120) .252 R.P. (.050 TYP) (.050 TYP) (.045 TYP) R.P. Part Number Interface -1CCSF -2CCSF Detent Smooth Bore O .104 O .090 (O .052) OA (reference only) (O .071) .158 R.P. WMP(R) Female Straight to 2.4mm Female / WP142-1CCSF (.681) (2X .125) (.312 HEX) (.360) (.014) (.095 .001) CABLE R.P. Part Number Interface -1CC -2CC Detent Non-Detent Part Number Interface -1CC -2CC Detent Non-Detent O .094 .164 WMP(R) FEMALE INTERFACE CAP .060 2X .060.001 O .104 (THD .120-64 UNS-2A) O .067 O .063 .154 .025 2X O .020.001 .032 (R) WMP MALE Ground Plane 2X .094 SQ. .032 TO ACCEPT .047 SEMIRIGID CABLE .466 Part Number Interface -1SF -2SF Detent Smooth Bore Trace Trace (.128) .020 (.025) SLOT DEPTH .074 R.P. (.010) .108 (.057) .100 OA (.026) .108 WMP(R) Shroud, Thread in Style / WP202 R.P. .081 .090 .002 WMP(R) Male Straight Surface Mount (w/ 2 Posts) / WP355 WMP(R) Female Miter R/A to O .047 Semi-Rigid Cable / WP148-CC SHROUDS (.049) .095.001 2X .008 .002 .075.002 (.120) R.P. 2X O .062 O .115.001 R.P. 2X .041 WMP(R) Female to WMP(R) Female Bullet / WP101-4CC 2X .017 THICK TAB O .070 O A O .100 2X O .063 O .009 .001 (.040) (2X FULL R .0125) .154 R.P. (.018 TYP) 2X .008 THICK TAB 2.4mm FEMALE INTERFACE WMP(R) FEMALE INTERFACE .045 TYP .123 WMP(R) MALE INTERFACE (O .012) PLATED THROUGH HOLES (.305) (.265) (.078) 2X O .063 O .068 Detent Non-Detent WMP(R) Male PCB Edge Mount to Straight Termination / WP351 TO ACCEPT O .047 SEMI-RIGID CABLE .072 .494 WMP(R) Female to WMP(R) Female Bullet / WP101-3CC Interface -1CC -2CC WMP Male Straight to .047 Semi-Rigid Cable / WP108 O .068 O .110 O .022 Part Number (R) (.048) 2X .041 O .075 (reference only) O .100 .200 2X .094 SQ. .088 (.662) (.126) .032 .021 WMP (R) FEMALE INTERFACE O .067 (R) WMP(R) Female to WMP(R) Female Bullet / WP101-2CC .074 R.P. (.010) .290 O .100 2X .041 O A (.026) .070 .040 .023 .064 .071 .032 .064 .032 Dielectric O .018 .032 Ground Plane Part Number Interface -1CC -2CC Detent Non-Detent (reference only) 2X O .023 THRU WMP(R) Configurations Continued WMP (R) Configurations (cont.) Materials & Finish HERMETICS WMP(R) Male to Straight Termination / WP122 Figure 1 WMP (R) MALE INTERFACE Figure 2 .068 WMP (R) MALE INTERFACE .030 .043 (.080) Brass ASTM B 36, B121, B16, B16M Stainless Steel ASTM A484/ A582 or A555/581 Iron-Nickel-Cobalt ASTM F-15 .055 .068 (O .009) .098 .098 (O A) (O A) .009 .048 .025 R.P. Specification ASTM B 196 and/or ASTM B 197 (.030) .068 .036 Metal BeCu (Beryllium Copper) R.P. Dielectric Specification Virgin PTFE Fluorocarbon ASTM D 1710 and ASTM D 1457 Polyamide-Imide ASTM D5204 Group 2 Class 1 Glass Corning 7070 or Equivalent Finish Specification (.025) Part Number Interface Figure -1CC -2CC -3CC -4CC Detent Smooth Bore Detent Smooth Bore 1 1 2 2 Gold (75u in. Typ) ASTM-B488 Type 1, Class 1.25 Nickel (100u in. Typ) SAE AMS-QQ-N-290 Pasivation ASTM A967 Ordering Information Configuration Cable Connectors PC Board Connectors Bullets Shrouds Hermetics Adapters* Tools Part Number Description WP108-1CC WP107-1CC WP148-1CC WP351-1CC WP351-2CC WP350-1CC WP350-2CC WP355-1CC WP355-2CC WP101-1CC WP101-2CC WP101-3CC WP101-4CC WP202-1SF WP202-2SF WP203-1SF WP203-2SF WP122-1CC WP122-2CC 4004-17 WP140-1CCSF WP141-1CCSF WP141-2CCSF WP142-1CCSF WMP (male) straight connector for 0.047" semi-rigid cables WMP (female) straight connector for 0.047" semi-rigid cables WMP (female) right angle connector for 0.047" semi-rigid cables T-6183 WMP plug (male) Edge Mount to straight termination WMP plug (male) Surface Mount to straight termination WMP plug (male) Surface Mount to straight termination (w/ 2 posts) Detent Limited Smooth Bore Limited Smooth Bore Limited Smooth Bore WMP (female) to WMP (female) adapter, 0.098" length WMP (female) to WMP (female) adapter, 0.20" length WMP (female) to WMP (female) adapter, 0.154" length WMP (female) to WMP (female) adapter, 0.466" length WMP Shroud, Thread-in WMP Shroud, 2-hole flange mount WMP (male) to straight termination (hermetically sealed), 0.043" length Limited Smooth Bore Limited Smooth Bore Limited Smooth Bore Feedthrough WMP (female) to 2.4mm (male) straight adapter WMP (male) to 2.4mm (female) straight adapter Limited Smooth Bore WMP (female) to 2.4mm (female) straight adapter Insertion/Withdrawl tool Parts with a `CC' suffix are Gold Plated / Parts with a `CCSF' suffix are Passivated Steel *Standard Adapters have a Passivated Steel finish. Gold finish options also available. Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703 Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com (c) Carlisle Interconnect Technologies, 2012. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved. Rev. 060112-2000