TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
VOIDLESS-HERMETICALLY-SEALED
STANDARD RECOVERY GLASS RECTIFIERS
Qualified per MIL-PRF-19500/228
T4-LDS-0190 Rev. 1 (110047) Page 1 of 5
DEVICES LEVELS
1N3611 thru 1N3613 JAN, JANTX
*1N3614 and 1N3957 * JAN, TX, TXV
DESCRIPTION
This “standard recovery” rectifier diode series is military qualified to MIL-PRF-19500/228
and is ideal for high-reliability applications where a failure cannot be tolerated. These
industry-recognized 1.0 Amp rated rectifiers for working peak reverse voltages from 200 to
1000 volts are hermetically sealed with voidless-glass construction using an internal
“Category I” metallurgical bond. These devices are similar in ratings to the 1N5614 thru
1N5622 series where surface mount MELF package configurations are available by adding a
“US” suffix (see separate data sheet for 1N5614US thru 1N5622US). Microsemi also offers
numerous other rectifier products to meet higher and lower current ratings with various
recovery time speed requirements including fast and ultrafast device types in both through-
hole and surface mount packages.
IMPORTANT: For the most current data, consult MICROSEMI’s website:
http://www.microsemi.com
FEATURES
¾ Popular JEDEC registered 1N3611 thru 1N3614 and 1N3597 series
¾ Voidless hermetically sealed glass package
¾ Internal “Category I” Metallurgical bonds
¾ Working Peak Reverse Voltage 200 to 1000 Volts.
¾ JAN, JANTX, and JANTXV available per MIL-PRF-19500/286 (for JANS, see
1N5614-5622 series)
¾ Surface mount equivalents also available in a square end-cap MELF configuration with
“US” suffix (also see 1N5614US thru 1N5622US)
“A” Package
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0190 Rev. 1 (110047) Page 2 of 5
APPLICATIONS / BENEFITS
¾ Standard recovery 1 Amp rectifiers 200 to 1000 V
¾ Military and other high-reliability applications
¾ General rectifier applications including bridges, half-bridges, catch diodes, etc.
¾ High forward surge current capability
¾ Extremely robust construction
¾ Low thermal resistance
¾ Controlled avalanche with peak reverse power capability
¾ Inherently radiation hard as described in Microsemi MicroNote 050
MAXIMUM RATINGS
¾ Junction & Storage Temperature: -65oC to +175oC
¾ Thermal Resistance: 38oC/W junction to lead at 3/8 inch (10 mm) lead length from body
¾ Average Rectified Forward Current (IO): 1.0 Amps @ TA = 100ºC and 0.30 Amps at 150ºC
¾ Forward Surge Current: 30 Amps @ 8.3 ms half-sine
¾ Solder Temperatures: 260ºC for 10 s (maximum)
MECHANICAL AND PACKAGING
¾ CASE: Hermetically sealed voidless hard glass with Tungsten slugs
¾ TERMINATIONS: Axial leads are copper with Tin/Lead (Sn/Pb) finish
¾ MARKING: Body paint and part number, etc.
¾ POLARITY: Cathode band
¾ TAPE & REEL option: Standard per EIA-296
¾ WEIGHT: 500 mg (approx)
¾ See package dimensions on last page
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0190 Rev. 1 (110047) Page 3 of 5
ELECTRICAL CHARACTERISTICS @ 30oC Case Temperature
TYPE
WORKING
PEAK
REVERSE
VOLTAGE
VRWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR @ 100μA
AVERAGE
RECTIFIED
CURRENT
(NOTE 2)
IO
MAXIMUM
FORWARD
VOLTAGE
VF @ 1 A
(PULSED)
MAXIMUM
REVERSE
CURRENT
IR @ VRWM
MAXIMUM
SURGE
CURRENT
(NOTE1)
IFSM
VOLTS VOLTS AMPS VOLTS μA AMPS
100oC 150oC 25oC 150oC
JAN1N3611 200 240 1.0 0.30 1.1 1.0 300 30
JAN1N3612 400 480 1.0 0.30 1.1 1.0 300 30
JAN1N3613 600 720 1.0 0.30 1.1 1.0 300 30
JAN1N3614 800 920 1.0 0.30 1.1 1.0 300 30
JAN1N3957 1000 1150 1.0 0.30 1.1 1.0 300 30
NOTE 1: TA = 25oC, IO = 1.0 A, 10 surges of 8.3 ms @ 1 minute intervals
NOTE 2: Linearly derate at 13.3 mA/ºC between TA=100ºC and 175ºC
SYMBOLS & DEFINITIONS
Symbol Definition
VBR Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current.
VRWM Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating
temperature range.
VF Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified
current.
IR Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage
and temperature.
6 L
a
1-8
0
We
b
T4-
L
T
a
ke Street, Lawre
n
0
0-446-1158 / (97
8
b
site: http://www
L
DS-0190 Rev
.
T
YPICAL F
O
n
ce, MA 01841
8
) 620-2600 / Fax
:
.microsemi.com
.
1 (110047)
FIGU
O
RWARD C
O
:
(978) 689-0803
RE 1
O
NDUCTA
N
SU
R
Square Pu
l
N
CE CURVE
R
GE DURA
T
l
se Current v
s
TEC
H
GRAPH
A
L
FIGURE 3
T
ION vs PU
L
s
Duration fo
r
H
NIC
A
Gor
t
Tel:
S
L
LOWABL
E
L
SE CURRE
N
r
Non-Repeti
t
A
L D
A
t
Road Business
P
+353 (0) 65 684
0
FIGURE
E
PEAK SUR
G
N
T
t
ive Pulse
A
TA
SH
P
ark, Ennis, Co.
C
0
044 Fax: +353
(
2
G
E vs DUR
A
H
EET
C
lare, Ireland
(
0) 65 6822298
Page 4 of 5
A
TION
TECHNICAL DATA SHEET
6 Lake Street, Lawrence, MA 01841 Gort Road Business Park, Ennis, Co. Clare, Ireland
1-800-446-1158 / (978) 620-2600 / Fax: ( 978) 689-0803 Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
T4-LDS-0190 Rev. 1 (110047) Page 5 of 5
PACKAGE DIMENSIONS
NOTE: Dimensions
1. Dimensions are in inches. Ltr Inches Millimeters Notes
2. Millimeters are given for general information only. Min Max Min Max
3. Dimension BL shall include the entire body including slugs BD .060 .110 1.52 2.79 4
and sections of the lead over which the diameter is BL .125 .205 3.18 5.21 3
uncontrolled. This uncontrolled area is defined as the zone LD .025 .034 0.64 0.86 3
between the edge of the diode body and extending .050 inch. LL .600 1.500 15.24 38.10
(1.27 mm) onto the leads.
