(1/3) SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) Conformity to RoHS Directive CPL Series CPL2512 FEATURES * It delivers low Rdc with high Idc. * It is lead-free compatible. The product contains no lead whatsoever. It is able to withstand high temperature reflows (260C during the peak) used in lead-free soldering. APPLICATIONS Portable audio visual devices (DSCs, DVCs, etc.) Mobile communication devices (cellular phones, etc.) Information devices (PCs, etc.) PRODUCT IDENTIFICATION CPL 2512 T 100 M (1) (2) (3) (4) (5) (1) Series name SPECIFICATIONS -40 to +105C [Including self-temperature rise] -40 to +105C Operating temperature range Storage temperature range RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERING 300 Withstanding soldering heat condition Peak 260C Solderability condition Temperature(C) Peak 230C 200 Preheating 140 to 180C/120s 200C 30s (2) Dimensions 2512 2.5x 1.5x 1.2mm (3) Packaging style T Taping (4) Inductance 1R0 100 1H 10H (5) Inductance tolerance M 20% 200C 70s 100 PACKAGING STYLE AND QUANTITIES Preheating 100 to 150C/120s Packaging style Taping Quantity 2000 pieces/reel Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application are considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm (2/3) 1.3 1.2max. SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM/RECOMMENDED PC BOARD PATTERN 2.50.2 0.65 1.5 0.65 Dimensions in mm 1.50.2 * No polarity Weight:20mg 0.60.15 Dimensions in mm 0.60.15 ELECTRICAL CHARACTERISTICS Inductance (H) 1 1.5 2.2 3.3 4.7 6.8 10 1 2 Inductance tolerance (%) 20 20 20 20 20 20 20 DC resistance ()30% 0.09 0.12 0.135 0.24 0.36 0.7 0.9 Rated current1 (mA)max. 1500 1200 900 730 650 450 300 Rated current2 (mA)max. 1300 1000 900 730 650 450 300 Part No. CPL2512T1R0M CPL2512T1R5M CPL2512T2R2M CPL2512T3R3M CPL2512T4R7M CPL2512T6R8M CPL2512T100M Rated current based on inductance variation: Current when inductance decreases by 30% of the initial value due to direct current superimposed characteristics Rated current based on increasing product temperature: Current when temperature of the product reaches +40C TYPICAL ELECTRICAL CHARACTERISTICS INDUCTANCE vs. FREQUENCY CHARACTERISTICS INDUCTANCE vs. DC SUPERPOSITION CHARACTERISTICS 10 10 Inductance(H) 100 Inductance(H) 100 1 0.1 0.1 1 10 100 1 0.1 10 100 1H 4.7H 1.5H 6.8H 2.2H 10H 3.3H 1000 10000 DC current(mA) Frequency (MHz) 1H 4.7H 1.5H 6.8H 2.2H 10H 3.3H * All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm (3/3) TYPICAL ELECTRICAL CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS DC SUPERPOSITION vs. INDUCTANCE DECREASING RATE 10000 0 Inductance decreasing rate(%) -5 Impedance() 1000 100 10 -10 -15 -20 -25 -30 -35 -40 -45 1 0.1 1 10 100 -50 10 100 Frequency (MHz) 1H 4.7H 1.5H 6.8H 2.2H 10H 1000 10000 DC current(mA) 3.3H 1H 4.7H 1.5H 6.8H 2.2H 10H 3.3H * All specifications are subject to change without notice. 002-02 / 20090127 / e531_cpl2512.fm