93
02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21
02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
02 03 04 05 06 07 08
09 10 11 12
A
Standard pole sizes
Available on demand. Minimum order quantity 5000
pieces per item.
Type 049
centerline 10 mm / 0.394 inches
P/N 310492
Type 049
centerline 5 mm / 0.197 inches
P/N 310491
Part numbers (P/N) (information: page 56)
Complete the part number by
adding the pole size.
L = (pole size - 1) x centerline + 5 mm / 0.197 inches
Type 049
Screw type terminal block, pluggable, centerline 5 mm /
0.197 inches, wire entry parallel to plug direction, lift
system, female contact
Standard pole sizes
Available on demand. Minimum order quantity 5000
pieces per item.
Type 009
centerline 5 mm / 0.197 inches
P/N 310091
Part numbers (P/N) (information: page 56)
Complete the part number by
adding the pole size.
L = (pole size - 1) x centerline + 5 mm / 0.197 inches
Type 009
Screw type terminal block, pluggable, centerline 5 mm /
0.197 inches, wire entry parallel to plug direction, wire
protector, female contact
Type 030 page 139
Type 029 page 137
Type 020 page 132
Type 019 page 130
to Type 009 and Type 049
Headers
Accessories
for Type 009 and Type 049
Coding set
716906 Seite 204
Color black
2 - 24
Pole size
Min. insul. strip length 6 mm
Tightening torque UL 4.4 lb-in max.
IP20
Protection category according
to IEC 529
Insulating material class CTI 600
min. 4.7 mm
Clearance and creepage distances
Insulation co-ordination according to EN 60664-1
0.08 - 2.5 mm² 250 V / 4 kV / 10 A
V / A / AWG 300 / 15 / 22 - 12
V / A / AWG 300 / 15 / 22 - 12
Technical Data
Color black
2 - 21
Pole size
Min. insul. strip length 6 mm
Tightening torque UL 4.4 lb-in max.
IP00
Protection category according
to IEC 529
Insulating material class CTI 600
min. 1.9 mm
Clearance and creepage distances
Insulation co-ordination according to EN 60664-1
0.08 - 2.5 mm² 125 V / 2.5 kV / 10 A
V / A / AWG 300 / 15 / 22 - 12
V / A / AWG 300 / 15 / 22 - 12
Technical Data
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 125 320 320
Rated test voltage 1.5 4 2.5
Overvoltage category III III II
Pollution degree 3 2 2
Rated voltage 320 800 800
Rated test voltage 4 6 4
Dimensions in mm 1 mm = 0.0394 in. Dimensions in mm 1 mm = 0.0394 in.
Note for wire range
Additional wire sizes and/or
combinations of same size
wires as follows:
Type 09
#(1) Wire range extended
to No. 30 AWG for
factory-wiring.
++ Two same size wires
No. 22 - 18 AWG Cu
Sol/Str for field-wiring;
No. 30 - 18 AWG Cu
Sol/Str factory-wiring.
Type 49
#### 2 No. 22 - 18 AWG
(field-wiring);
2 No. 26 - 18 AWG or
1 No. 26 - 14 AWG
(factory-wiring)
