DATA SHEET W005G~W10G 1.5 AMPERE SILICON MINIATURE SINGLE- PHASE BRIDGES VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes Unit: inch ( mm ) .217(5.5) .197(5.0) AM FEATURES * Ratings to 1000V PRV .370(9.4) .358(9.1) * Surge overload rating: 30/50 Amperes peak * Ideal for printed circuit board 1.0(25.4) MIN * Reliable construction utilizing molded plastic 1.2(30.5) MIN * Mounting position:Any MECHANICAL DATA Case:Reliable low cost construction utilizing molded plastic technique results in inexpensive product. .220( 5.6 .181( ) 4.6) .031(0.8) .028(0.7) Terminals: Leads solderable per MIL-STD-202, Method 208 Polarity :Polarity symbols marking on body. Bottom View Weight: 0.05 ounce, 1.3 grams .220( 5.6 .181( ) 4.6) Available with 0.50 inch leads(P/N add suffix "S") For Capacitive load derate current by 20%. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25C ambient temperature unless otherwise specified. Resistive or inductive load, Single phase, half wave, 60Hz. For Capacitive load derate current by 20%. UNITS W005G W01G W02G W04G W06G W08G W10G 50 100 200 400 600 800 1000 V Maximum RMS Bridge input Voltage 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Recurrent Peak Reverse Voltage Maximum Average Forward Current TA=50C 1.5 A 50.0 A 10.0 A2 S Maximum Forward Voltage Drop per Bridge Element at 1.0A 1.0 V Maximum Reverse Current at Rated TJ= 25C DC Blocking Voltage per element TJ=100C 10.0 A 1.0 mA Typical Junction capacitance per leg (Note 1) CJ 24.0 pF Typical Thermal resistance per leg (Note 2) RJA 36.0 13.0 C/W Operating Temperature Range TJ -55 to +125 C Storage Temperature Range TA -55 to +150 C Peak Forward Surge Current, 8.3ms singlehalf sine-wave superimposed on rated load I2t Rating for fusing ( t < 8.35 ms) Typical Thermal resistance per leg (Note 2) RJA NOTES: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts. 2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 X 0.47"(12 X 12mm) copper pads. DATE : 02/09/06 PAGE . 1 INSTANTANEOUS FORWARD CURRENT, AMPERES OUTPUT CURRENTAMPERES RATING AND CHARACTERISTIC CURVES 3.0 2.5 MOUNTED ON PC BOARD. TA 0.5"(12.7mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD 2.0 1.5 1.0 0.5 0 0 50 100 5.0 4.0 3.0 2.0 1.0 .9 .8 .7 .5 .3 .2 .1 .07 .05 .03 .02 .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 150 AMBIENT TEMPERATURE OC INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT Fig. 2- TYPICAL INSTANTANEOUS FORWARD CHARACTERISITCS (25 C) INSTANTANEOUS REVERSE CURRENT, MICROAMPERES O 10 O T C =100 C 1.0 0.1 T A =25 OC 0.01 0 20 40 60 80 100 120 140 PERCENT OF PEAK REVERSE VOLTAGE FPRWARD SURGE CURRENT, AMPERES pk (HALF SINE-WAVE) Fig. 3- TYPICAL REAK REVERSE CHARACTERISTICS 50 40 30 20 10 0 1 2 6 10 20 40 60 100 NO. OF CYCLES AT 60Hz Fig. 4- MAXIMUM NON-REPETITEVE PEAK FORWARD SURGE CURRENT DATE : 02/09/06 PAGE . 2