VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 FTDI Chip VI800A-PoE Datasheet Plug in accessory for VM800P Embedded Video Engine Plus module 1 Introduction 1.1 Features The VI800A-PoE is a plug in accessory for the VM800P Plus module, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. Connects to the VM800P Plus module using an SPI slave interface This module behaves as a SPI to ethernet bridge on the VM800P Plus module with the additional option of providing a 5V, 1.8A power pin derived from the ethernet port. SPI slave interface is converted to an ethernet interface compliant with IEEE 802.3 10BASE-T and 802.3u 100BASE-TX Power over Etherent (PoE) supplies 5V DC at 1.8A. May be used to power VM800P module. Conforms to IEEE 802.3af VI800A-PoE module is powered from the VM800P module (3V3 supply) 6 LEDs to indicate Ethernet status. (2 integrated in the RJ45 connector) RJ45 connector Use of FTDI devices in life support and/or safety applications is entirely at the user's risk, and the user agrees to defend, indemnify and hold FTDI harmless from any and all damages, claims, suits or expense resulting from such use. VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 2 Clearance No.: FTDI#414 Ordering Information Part No. Description VI800A-PoE VI800A Power over Ethernet module, plug in accessory for the VM800P Plus module Table 2-1 - Ordering information 2 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 Table of Contents 1 Introduction ................................................................................... 1 1.1 Features ........................................................................................................ 1 2 Ordering Information ..................................................................... 2 3 Hardware Description ..................................................................... 4 3.1 VI800A Power over Ethernet module ............................................................ 4 3.2 Physical Descriptions .................................................................................... 5 3.2.1 Dimensions ............................................................................................... 5 3.2.2 VI800A Power over Ethernet Connectors ...................................................... 6 3.2.3 VI800A Power over Ethernet Components ..................................................... 7 4 Board Schematics ........................................................................... 9 5 Hardware Setup Guide .................................................................. 10 5.1 6 Power Configuration ................................................................................... 10 Contact Information ..................................................................... 11 Appendix A - References....................................................................................... 11 Appendix B - List of Figures and Tables ................................................................. 12 Appendix C - Revision History ............................................................................... 13 3 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 3 Clearance No.: FTDI#414 Hardware Description Please refer to section 3.2.2 for connector settings. 3.1 VI800A Power over Ethernet module Figure 3-1 - VI800A-PoE module The VI800A-PoE module is designed to connect directly with the VM800P Plus module. The main functions of the VI800A-PoE module are as follows: Plug in accessory board for the VM800P Plus module. Interface to the VM800P Plus board as a SPI slave device. Connects with an external Ethernet interface. Contains 6 LEDs (2 integrated in RJ45 connector). Powered by the VM800P Plus board 5V @1.8A power available from Power over Ethernet (PoE) 4 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 3.2 Physical Descriptions 3.2.1 Dimensions The VI800A-PoE module dimension is illustrated in Figure 3-2 and Figure 3-3. 63.50 9.20 37.50 Figure 3-2 - VI800A-PoE module Top view 18.20 7.20 Figure 3-3 - VI800A-PoE module Bottom view 5 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 Figure 3-4 - VI800A-PoE module Side view All dimensions are in mm 3.2.2 VI800A Power over Ethernet Connectors Connectors and jumpers are described in the following sections. CN1 - RJ45 This is a standard ethernet connector with integrated LEDs and output for PoE. Pin No. Name Type Description 1 TX+ O Ethernet data TX+ output 2 TX- O Ethernet data TX- output 3 RX+ I Ethernet data RX+ input 4 POWER PWR Power (36-57V) 5 POWER PWR Power (36-57V) 6 RX- I 7 GND GND Ground 8 GND Table 3-1 - CN1 Pinout GND Ground Ethernet data RX- input CN2- Plug in Interface This is the interface where the control and data signals from the VM800P boards are routed. There are also power and ground pins on this interface. This interface is used to connect the VI800A-PoE board to the VM800P Plus board. Note: This connector should be connected to J6 of the VM800P Plus board. 6 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Pin No. Name Type 1 SCK I SPI Clock input 2 MOSI I SPI Master Out Slave in 3 MISO O SPI Master In Slave out 4 SS I SPI Chip select, active low 5 INT0 O Interrupt output, active low 6 IO6 I Daughter reset input, active low 7 AD4 IO Address/Data Line 4 8 AD5 IO Address/Data Line 5 9 3V3 P 3.3V power supply 10 5V P 5V power supply 11 GND P Ground 12 RST# I Reset, active low 13 AD1 IO Address/Data Line 1 14 NC NA Not Connected 15 ETH_INT# O Interrupt out, active low IO Address/Data Line 2 16 AD2 Table 3-2 - CN2 Pinout Clearance No.: FTDI#414 Description JP1- Power from PoE Jumper connection fitted when power source is from PoE. 3.2.3 VI800A Power over Ethernet Components U1 - W5100 This converts the SPI signals from the VM800P Plus board to Ethernet signals. The interface is IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant. U2 - AG9705-2BR Power over Ethernet PWR module. This module takes an input from the Ethernet port and outputs 5V @ 1.8A and conforms to IEEE 802.3af CN1 - LPJ0514GENL The RJ45 Ethernet connector to connect the ethernet cable with 2 integrated indicator LEDs. The green LED indicates if a link is established or not. If illuminated the link is good. The yellow LED indicates the link speed. Illuminated is 100Base-TX and unlit is 10Base-T LED1 -LED4 Indicates the status of the Ethernet transmission. 7 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 LED1: This is the FDX LED. It is yellow in colour. LED2: This is the collision LED. It is yellow in colour LED3: This is the RX LED. It is green in colour LED4:This is the TX LED. It is green in colour 8 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 4 Clearance No.: FTDI#414 Board Schematics Figure 4-1 - VI800A-PoE Schematics 9 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 5 Clearance No.: FTDI#414 Hardware Setup Guide 5.1 Power Configuration The board could be powered from PoE or the VM800P Plus board from the setting of JP1. The CN2 connector on the VI800 PoE board should be connected to the J6 connector of the VM800P Plus board as shown in the Figure 5-1. Figure 5-1 - VI800A-PoE module connected to VM800P Plus module 10 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 6 Clearance No.: FTDI#414 Contact Information Head Office - Glasgow, UK Branch Office - Tigard, Oregon, USA Unit 1, 2 Seaward Place, Centurion Business Park Glasgow G41 1HH United Kingdom Tel: +44 (0) 141 429 2777 Fax: +44 (0) 141 429 2758 7130 SW Fir Loop Tigard, OR 97223 USA Tel: +1 (503) 547 0988 Fax: +1 (503) 547 0987 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-Mail (Sales) E-Mail (Support) E-Mail (General Enquiries) sales1@ftdichip.com support1@ftdichip.com admin1@ftdichip.com us.sales@ftdichip.com us.support@ftdichip.com us.admin@ftdichip.com Branch Office - Taipei, Taiwan Branch Office - Shanghai, China 2F, No. 516, Sec. 1, NeiHu Road Taipei 114 Taiwan , R.O.C. Tel: +886 (0) 2 8797 1330 Fax: +886 (0) 2 8751 9737 Room 1103, No. 666 West Huaihai Road, Changning District, Shanghai, 200052 China Tel: +86 (0)21 6235 1596 Fax: +86 (0)21 6235 1595 E-mail (Sales) E-mail (Support) E-mail (General Enquiries) E-mail (Sales) E-mail (Support) E-mail (General Enquiries) tw.sales1@ftdichip.com tw.support1@ftdichip.com tw.admin1@ftdichip.com cn.sales@ftdichip.com cn.support@ftdichip.com cn.admin@ftdichip.com Web Site http://www.ftdichip.com/ Distributor and Sales Representatives Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. System and equipment manufacturers and designers are responsible to ensure that their systems, and any Future Technology Devices International Ltd (FTDI) devices incorporated in their systems, meet all applicable safety, regulatory and system-level performance requirements. All application-related information in this document (including application descriptions, suggested FTDI devices and other materials) is provided for reference only. While FTDI has taken care to assure it is accurate, this information is subject to customer confirmation, and FTDI disclaims all liability for system designs and for any applications assistance provided by FTDI. Use of FTDI devices in life support and/or safety applications is entirely at the user's risk, and the user agrees to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting from such use. This document is subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of this document. Neither the whole nor any part of the information contained in, or the product described in this document, may be adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH, United Kingdom. Scotland Registered Company Number: SC136640 11 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 Appendix A - References VM800P datasheet: VM800P Plus board FT800 datasheet: FT800_Embedded_Video_Engine FT800 software programming guide: FT800_Programmer_Guide FT800 sample application notes: AN_246_VM800CB_SampleAPP_Arduino_Introduction http://www.ftdichip.com/Support/Documents/AppNotes/AN_275_FT800_Example_with_Arduino.pdf AN_332 VI800A_POE_SampleApp 11 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 Appendix B - List of Figures and Tables List of Figures Figure 3-1 - VI800A-PoE module ................................................................................................................... 4 Figure 3-2 - VI800A-PoE module Top view ................................................................................................... 5 Figure 3-3 - VI800A-PoE module Bottom view ............................................................................................. 5 Figure 3-4 - VI800A-PoE module Side view .................................................................................................. 6 Figure 4-1 - VI800A-PoE Schematics ............................................................................................................ 9 Figure 5-1 - VI800A-PoE module connected to VM800P Plus module .................................................... 10 List of Tables Table 2-1 - Ordering information ................................................................................................................... 2 Table 3-1 - CN1 Pinout .................................................................................................................................... 6 Table 3-2 - CN2 Pinout .................................................................................................................................... 6 12 Copyright (c) 2014 Future Technology Devices International Limited VI800A_PoE Datasheet Version 1.1 Document Reference No.: FT_000996 Clearance No.: FTDI#414 Appendix C - Revision History Document Title: DS_VI800A-PoE Document Reference No.: FT_000996 Clearance No.: FTDI#414 Product Page: http://www.ftdichip.com/EVE.htm Document Feedback: Send Feedback Version 1.0 Initial Datasheet released 10/14/14 Version 1.1 Initial Datasheet released 10/20/14 13 Copyright (c) 2014 Future Technology Devices International Limited Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: FTDI: VI800A-PoE