5.2 Identification Systems Wire and Cable Markers Identification ties and plates for marking cable bundles * IT Ties Features and Benefits These cable ties are suitable for the identification and securing of cable bundles, saving valuable installation time by using just one product to both secure and identify. They can be marked either on-site or after bundling has taken place. They can be marked manually using the T82S series of indelible marker pens. In addition there is a large selection of labels available for marking. One operation with two benefits. Material Data Material Application Colour One of the major benefits is the ability to both secure and identify cable bundles at different times. ! Polyamide 6.6 (PA66) Natural (NA), Black (BK), Available on request Operating Temperature -40 C to +85 C Continuous, (+105 C for 500 h) Flammability UL94 V2 halogenfree More information on marker pens can be found on page 495. Certifications please see Appendix. IT50R IT18R IT50RD IT50L IT18FL IT50RT Technical Table Article-No. Type Colour Bundle O min. Bundle O max. Width (W) Height (H) Length (L) Min. Tensile Strength (N) Pack Cont. Recommended Labels 111-81821 IT18R Natural (NA) 6.00 22.00 25.00 8.00 100.0 2.30 80 100 TAG23-06TD1 111-81919 IT18FL Natural (NA) 1.50 19.00 20.50 9.00 110 2.50 80 100 TAG18-07TD1 111-85019 IT50R Natural (NA) 9.50 44.50 28.00 12.90 203 4.60 225 100 TAG23-10TD1 111-85219 IT50RD Natural (NA) 10.00 44.00 29.00 26.30 205 4.70 225 50 TAG26-21TD1 111-85119 IT50RT Natural (NA) 10.00 44.00 46.00 26.30 205 4.70 225 50 TAG43-21TD1 111-85319 IT50L Natural (NA) 10.00 100.00 56.00 12.80 390 4.70 225 100 TAG52-10TD1 All dimensions in mm. Subject to technical changes. Please note! Not all products listed on this page may have this approval. For product specific approvals please refer to the Appendix. 510 Width (W2) Date of issue: April 2011