www.hubbell-wiring.com
Hubbell’s USB Charger Receptacle provides both USB and
AC electrical power in a standard single gang electrical opening.
Designed to provide more charging options for personal electronics.
Ideal for use in renovation, new construction and to add capacity for
USB charging. Especially suited for use in hotels, hospitals, offices,
homes and more.
Hubbell USB Charger Receptacle
More Power – Charge Faster
Charge Devices
Simultaneously!
Tablets
Smartphones
MP3 players
Apple® iPad®
Apple® iPod®
Apple® iPhone®
Two USB Ports
3 Amps, 5 Volt DC
Duplex Tamper-
Resistant Outlets
LED Power
Indicator
Schools Hotels ResidentialOffices Healthcare
Wiring Device-Kellems
®
DIMENSIONS FEATURES
SPECIFICATIONS
ORDERING INFORMATION
ENERGY INFORMATION
Wiring Device-Kellems
®
www.hubbell-wiring.com
Hubbell Wiring Systems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031
Printed in U.S.A. Specications subject to change without notice.
WLFSB002A 3/13
Description Color 15A 125V AC 20A 125V AC
USB Charger Tamper-Resistant Receptacle,
Two USB Type 2.0 Ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC Decorator Duplex
Black
Brown
Gray
Ivory
Light Almond
White
USB15X2BK
USB15X2
USB15X2GY
USB15X2I
USB15X2LA
USB15X2W
USB20X2BK
USB20X2
USB20X2GY
USB20X2I
USB20X2LA
USB20X2W
Hospital Grade
USB Charger Tamper-Resistant Receptacle,
Two USB Type 2.0 Ports 3 Amp, 5 Volt DC,
15 or 20 Amp, 125 Volt AC Decorator Duplex
Black
Brown
Gray
Ivory
Light Almond
Red
White
USB8200BK
USB8200
USB8200GY
USB8200I
USB8200LA
USB8200R
USB8200W
USB8300BK
USB8300
USB8300GY
USB8300I
USB8300LA
USB8300R
USB8300W
Note: For use with boxes deeper than 1.5" with internal AC/MC clamps.
Apple, iPad, iPod and iPhone are registered trademarks of Apple, inc.
HUBBELL WIRING DEVICE-KELLEMS USB Charger Receptacle
Two USB ports 3 Amp, 5V DC, Type A, 2.0
Tamper-Resistant (TR) decorator duplex
Green LED indicator to show USB power available
Impact and chemical resistant
Back and side wire for solid or stranded wire
Flush fit design
Electrical ratings: 15 or 20 Amp, 125V AC,
USB 3 Amp, 5V DC
Input voltage: 125V AC, 60Hz
Circuit feed-through 20 Amp, 125 Volt
#10-14 AWG gauge wire terminals
Dielectric withstand: 2000V
Operating temperature: maximum continuous 75° C;
minimum -40° C (without impact)
Meets UL94 for 5V flammability rating
Complies with battery charging specification
USB BC1.2
Compatible with USB 1.1/2.0/3.0 devices, including
Apple products
Complies with Part 15 of the FCC rules
cULus listed to UL498 and UL1310
120V AC Input Power Energy consumed when USBs are not in use Energy consumed when USBs are fully used
No Load Current .0013A Full Load Current 0.323A
No Load Watts .63W Full Load Watts 19.7W
Time to charge an iPad® or similar tablet with the Hubbell USB Charger, from 0% battery charge to 100%,
is estimated to be between 5 to 6 hours.
Estimated annual cost to use a USB Charger Receptacle, charging 2 devices (tablets drawing maximum power),
for 6 hours a day, at a Kilowatt cost of $0.10.
Hours of use (6) x kilowatt cost ($0.10) x kilowatt usage per hour (19.7w/1000*) x 365 days = $4.31
Hours of non-use (18) x kilowatt cost ($0.10) x kilowatt usage per hour ( .63w/1000*) x 365 days = $0.41
Total hours (24) Total cost per year $4.72
*To convert watts to kilowatts, divide watts by 1000.
