OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue E 06/2012
Page 1 of 2
Six-Element SMD Photodiode Array
OPR2100, OPR2100T, OPR2100HS, OPR2100HST
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Description:
Each OPR2100 device is a six-element photodiode that is designed to meet the needs of motor encoder
applications. Designed specifically for industrial encoder applications, the OPR2100 features a high temperature
SMD chip carrier, a temperature range and a low leakage current that can withstand extreme operating conditions.
These devices have an opaque chip carrier that encloses six individual chips, which are mounted on isolated
cathode contacts to allow external connection in any desired configuration. The opaque polyimide package
shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering
conditions, while the gold-plated wraparound solder pads provide exceptional storage and wetting characteristics.
See Application Bulletin 237 for handling instructions.
Ordering Information
Part
Number Sensor # of
Elements Responsivity
(mA/mW) Min Reverse Voltage
Breakdown Active Area
mm2(each) Packaging
OPR2100 Photodiode Array 6 0.45 50 3.45 Tube
OPR2100T Photodiode Array 6 0.45 50 3.45 Tape & Reel
OPR2100HS Photodiode Array 6 0.45 50 3.45 Tube
OPR2100HST Photodiode Array 6 0.45 50 3.45 Tape & Reel
Bandwidth
55kHz
55kHz
200kHz
200kHz
Features:
Six-PIN photodiode array
High-temperature chip carrier
Closely matched responsivity between elements
Choice of low or high speed
Easily mountable in any configuration
Suitable for harsh industrial operating conditions
Applications:
Motor encoder applications
Industrial encoder applications
Six-Element SMD Photodiode Array
OPR2100, OPR2100T, OPR2100HS, OPR2100HST
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue E 06/2012
Page 2 of 2
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Electrical Characteristics (TA = 25° C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
R Responsivity 0.45 - - A/W Ee = 10 µW, λ = 890 nm, V = 0 V
VBR Reverse Breakdown Voltage 50 - - V IR= 10 µA
ID Reverse Dark Current - - 10 nA VR= 10 V, Ee = 0
BW Bandwidth - - 200 kHz TA 125ºC
CT Capacitance - 10 - pF VR = 10 V
Lx W Active Area (per diode) - 3.45 - mm2 2.73 mm x 1.34 mm
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Storage and Operating Temperature -55° C to +125° C
Reverse Breakdown Voltage 50 V / minute
Solder reflow time within 5°C of peak temperature is 20 to 40 seconds(1) 250° C
Notes:
1. Solder time less than 5 seconds at temperature extreme.
2. Package thermal resistance is 142° C / W
Spectral Responsivity
0
10
20
30
40
50
60
70
80
90
100
0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
Wavelength (µm )
Relative Response (%)
OPR2100
Pin # Description
1 Cathode A
2 Cathode B
3 Anode B
4 Anode C
5 Cathode C
6 Cathode D
7 Anode D
8 Cathode E
9 Anode E
10 Anode F
11 Cathode F
12 Anode A
0 Ground Plane
Warning: Front
Window is pressure
sensitive. Do not
apply pressure or
high vacuum to
window.
Anode Cathode
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Optek:
OPR2100 OPR2100T