DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 PSS9014C NPN general purpose transistor Product specification Supersedes data of 2002 Sep 20 2004 Aug 10 Philips Semiconductors Product specification NPN general purpose transistor PSS9014C PINNING FEATURES * High power dissipation: 500 mW PIN DESCRIPTION * Low collector capacitance 1 collector * Low collector-emitter saturation voltage 2 base * High current capability. 3 emitter APPLICATIONS * General purpose switching and amplification. handbook, halfpage1 DESCRIPTION 1 2 3 2 NPN low VCEsat transistor in a SOT54 (TO-92) plastic package. 3 MAM279 MARKING TYPE NUMBER MARKING CODE PSS9014C Fig.1 Simplified outline (SOT54) and symbol. S9014C LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCBO collector-base voltage open emitter - 50 VCEO collector-emitter voltage open base - 45 V VEBO emitter-base voltage open collector - 5 V IC collector current (DC) - 100 mA ICM peak collector current - 200 mA IBM peak base current - 200 mA Ptot total power dissipation - 500 mW Tamb 25 C; note 1 V Tstg storage temperature -65 +150 C Tj junction temperature - 150 C Tamb operating ambient temperature -65 +150 C Note 1. Device mounted on a printed-circuit board; single sided copper; tinplated; standard footprint. 2004 Aug 10 2 Philips Semiconductors Product specification NPN general purpose transistor PSS9014C THERMAL CHARACTERISTICS SYMBOL Rth j-a PARAMETER thermal resistance from junction to ambient CONDITIONS in free air; note 1 VALUE UNIT 250 K/W Note 1. Device mounted on a printed-circuit board; single sided copper; tinplated; standard footprint. CHARACTERISTICS Tamb = 25 C unless otherwise specified. SYMBOL ICBO PARAMETER collector-base cut-off current CONDITIONS MIN. TYP. MAX. UNIT VCB = 30 V; IE = 0 - - 15 nA VCB = 30 V; IE = 0; Tamb = 150 C - - 5 A ICEO collector-emitter cut-off current VCE = 30 V; IB = 0 - - 100 nA IEBO emitter-base cut-off current VEB = 5 V; IC = 0 - - 100 nA hFE DC current gain IC = 1 mA; VCE = 5 V 200 300 600 IC = 2 mA; VCE = 5 V 200 300 450 VCEsat collector-emitter saturation voltage IC = 100 mA; IB = 5 mA; note 1 - 200 300 mV VBEsat base-emitter saturation voltage IC = 100 mA; IB = 0.5 mA; note 1 - 815 850 mV VBEon base-emitter turn-on voltage IC = 2 mA; VCE = 5 V 580 650 700 mV fT transition frequency IC = 50 mA; VCE = 10 V; f = 100 MHz 100 220 - MHz Cc collector capacitance VCB = 10 V; IE = ie = 0; f = 1 MHz - 1.6 1.75 pF F noise figure VCE = 5 V; IC = 0.2 mA; RS = 2 k; f = 1 kHz; B = 200 Hz - - 10 dB Note 1. Pulse test: tp 300 s; 0.02. 2004 Aug 10 3 Philips Semiconductors Product specification NPN general purpose transistor PSS9014C MLD927 103 handbook, halfpage MLD928 104 handbook, halfpage VCEsat h FE (mV) 102 103 10 102 1 10-1 1 102 10 IC (mA) 10 10-2 103 VCE = 5 V. IC/IB = 20. Fig.2 Fig.3 DC current gain as a function of collector current; typical values. MLD929 104 handbook, halfpage 10-1 1 10 102 103 IC (mA) Collector-emitter saturation voltage as a function of collector current; typical values. MLD930 104 handbook, halfpage VBE (mV) VBEsat (mV) 103 103 102 102 10 10-2 10-1 1 10 10 10-2 102 103 IC (mA) 10-1 1 10 102 103 IC (mA) IC/IB = 20. Fig.4 Base-emitter saturation voltage as a function of collector current; typical values. 2004 Aug 10 Fig.5 4 Base-emitter voltage as a function of collector current; typical values. Philips Semiconductors Product specification NPN general purpose transistor PSS9014C PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads SOT54 c E d A L b 1 e1 2 D e 3 b1 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b b1 c D d E mm 5.2 5.0 0.48 0.40 0.66 0.55 0.45 0.38 4.8 4.4 1.7 1.4 4.2 3.6 e 2.54 e1 L L1(1) 1.27 14.5 12.7 2.5 max. Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 2004 Aug 10 REFERENCES IEC JEDEC JEITA TO-92 SC-43A 5 EUROPEAN PROJECTION ISSUE DATE 97-02-28 04-06-28 Philips Semiconductors Product specification NPN general purpose transistor PSS9014C DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2004 Aug 10 6 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA76 (c) Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R75/03/pp7 Date of release: 2004 Aug 10 Document order number: 9397 750 13686