6SHFLFDWLRQ Technology Standard: IEEE802.3 10Base-T IEEE802.3u 100Base-TX IEEE802.3ab 1000Base-T IEEE802.3z Gigabit Ethernet Fiber ,((([ARZFRQWURODQGEDFNSUHVVXUH IEEE802.1p Class of Service Performance Switch Technology: Store and Forward Technology with 32Gbps Switch Fabric. System Throughput: 14,880pps for 10M Ethernet, 148,800pps for 100M Fast Ethernet, 1,488,100 for Gigabit Ethernet Transfer packet size: 64 bytes to 1522 bytes (with VLAN Tag) MAC Address: 8K MAC address table System Packet Buffer: 1Mbits shared packet buffer Quality of Service: Compliance with IEEE802.1p class of service with Tag Based Priority rule Per switch port provides 4 priority queues with 8 (Higher):4(High):2(Low):1(Lower) scheduling. The Tag Priority ID as following: Higher (6,7), High (4,5), Low (0,3), Lowest (1,2) Industrial 10-port Gigabit Ethernet Switch JetNet 3010G Interface Number of Ports: 7 x 10/100 Base-TX with Auto MDI/MDI-X function Auto-Negotiation 3 x 1000Base-T supports Auto MDI/MDI-X , AutoNegotiation function and combo with Small Form Factor Package (SFP) socket Connectors: 10/100 Base-TX: RJ-45 1000Base-T: RJ-45 6)3VXSSRUWVDOOY6)3W\SH*LJDELWEHUWUDQVFHLYHU Power: 4-Pin Removable Terminal Block connector Cables: RJ-45 connector: supports CAT-3, CAT-4, CAT-5 unshielded twisted pair or shielded twisted pair cable. The link distance is maximum 100 meters Diagnostic LED: System Power: Power 1 (Green), Power 2 (Green) 10/100 Mbps RJ-45 port: Link/Activity (Green), Full Duplex/ Collision (Yellow) Ordering Information JetNet 3010G!Industrial 10-Port Gigabit Ethernet Switch Includes: JetNet 3010G(without SFP transceiver) Quick Installation Guide CD User's manual 87 port: Link/Activity(Green) 1000Base-T RJ-45 port: Link/Activity (Green) SFP port: Link/Activity (Green) Power Requirements System Power: 4 pins terminal block for power input. DC 24V (12~48V) with polarity reverse protection and redundant function Power Consumption: 11.5 Watts @ DC 24V(Maximum) Mechanical Installation: DIN-Rail or Wall mount Case: Aluminum metal case with IP31 grade case protection for drop-waterproof and dustproof Dimension: 137.85mm(H) x 96mm (W) x 132mm (D) ( with DIN rail clip) Weight: 0.875g without package Environmental O Operating Temperature: -20 ~70 C Operating Humidity: 0% ~ 90%, (non-condensing) Storage Temperature: -40 ~ 85 C Storage Humidity: 0%~ 95%, (non-condensing) Hi-Pot: 1.2KV on port to port and port to power O Regulatory Approvals EMI: FCC Class A, CE/EN55022 EMS: EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11 Safety: CE/EN60950 Shock: IEC60068-2-27 Vibration: IEC60068-2-6 Free Fall: IEC60068-2-32 MTBF: 267380 hours @ 25 C Warranty: 5 years O Industrial Ethernet Switch Optional Accessories O SFPGSX:1000Base-SX multi-mode SFP transceiver,550m, -10~70 C O SFPGSX-w:1000Base-SX multi-mode SFP transceiver,550m, wide operating temperature, -40~85 C O SFPGSX2:1000Base-SX plus multi-mode SFP transceiver,2Km, -10~70 C O SFPGSX2-w:1000Base-SX plus multi-mode SFP transceiver, 2Km,wide operating temperature, -10~70 C O SFPGLX10:1000Base-LX single-mode SFP transceiver 10Km, -10~70 C O SFPGLX10-w:1000Base-LX single-mode SFP transceiver, 10Km, wide operating temperature, -40~85 C O SFPGLHX30:1000Base-LHX single-mode SFP transceiver,30Km, -10~70 C O SFPGLHX30-w:1000Base-LHX single-mode SFP transceiver, 30Km, wide operating temperature, -40~85 C O SFPGXD50:1000Base-XD single-mode SFP transceiver, 50Km, -10~70 C O SFPGXD50-w:1000Base-XD single-mode SFP transceiver, 50Km, wide operating temperature, -40~85 C O SFPGZX70:1000Base-ZX single-mode SFP transceiver, 70Km, -10~70 C O SFPGZX70-w:1000Base-ZX single-mode SFP transceiver, 70Km, wide operating temperature, -40~85 C JetNet 3010G Industrial 10-port Gigabit Ethernet Switch 88