5962-9212603MPA - Maxim Integrated Products, Inc.

SCOPE: Dual Mode, +5V/Programmable Micropower Voltage Regulator

Device Type Generic Number SMD Ordering Information

01 MAX663M(x)/883B 5962-9212601MPA

02 MAX664M(x)/883B 5962-9212602MPA

03 MAX666M(x)/883B 5962-9212603MPA

Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:

Outline Letter Mil-Std-1835 Case Outline Package Code

MAXIM SMD

JA P GDIP1-T8 or CDIP2-T8 8 LEAD CERDIP J8

Absolute Maximum Ratings

Input Supply Voltage Device 01 & 03 ................................................................... +18V

Input Supply Voltage Device 02 ..............................................................................-18V

Terminal Voltage Range:

Device 01 (Sense, VOUT1, Shutdown, VSET, VTC)...................GND -0.3V to (VIN+0.3V)

Device 01 (VOUT2)..............................................................GND -0.3V to (VOUT1+0.3V)

Device 02 (VOUT, Shutdown1, Shutdown2, VSET, VOUT1)

..........….........VIN -0.3V to (GND+0.3V)

Device 02 (SENSE)...............................................................VIN -0.3V to (VOUT1+0.3V)

Device 03 (Sense, VOUT, LBI, Shutdown, VSET)................... (GND -0.3V) to VIN+0.3V

Device 03 (LBO)...................................................................... (GND -0.3V) to +16.5V

Output Sourc e Current:

Device 01 (VOUT2) .................................................................................................50mA

Device 01 (VOUT1) .................................................................................................25mA

Device 03 (VOUT) ...................................................................................................50mA

Output Sink Current:

Device 01 (VTC) ................................................................................................. -20mA

Device 02 (VOUT1, VOUT2) ..............................................................................….. -25mA

Device 03 (LBO) .........................................................................................….. -20mA

Lead Temperature (soldering, 10 seconds) ............................................................... +300°C

Storage Temperature .................................................................................. -65°C to +150°C

Continuous Power Dissipation ..............................................................................TA=+70°C

8 lead CERDIP(derate 8.0mW/°C above +70°C) .................................................... 640mW

Junct ion Temper ature T J ....................................................................................... +150°C

Thermal Resista nce, J unction to Case, ΘJC: .......................................................... 55°C/W

Thermal Resistance, J unction to Ambient, ΘJA: .................................................. 125°C/W

Recommended Operating Conditions.

Ambient Operating Range (TA) .............................................................. -55°C to +125°C

Input Voltage Range:

Device 01 & 03 ............................................................................…. +2.2V to +16.5V

Device 02 .......................................................................................…. -2.2V to -16.5V

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those indicated in the operational section s of the sp ecifica tions is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect device reliability.

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 2 of 8

TABLE 1 ELECTRICAL TESTS

PARAMETER Symbol CONDITIONS

-55 °C <=TA<= +125°C 1/

Unless otherwise specified

Group A

Subgroup Device

type Limits

Min 2/ Limits

Max Units

Quiescent Current IQ

VIN=16.5V, no external load

VIN=-16.5V, no external load

2,3

01,03

µA

Output Voltage VOUT VSET=GND, IOUT=1mA

2,3

01,03

4.75

4.50

-5.25

-5.50

5.25

5.50

-4.75

-4.50

Line Regulatio n VRLINE

+2.0V≤VIN≤+15.0V, VOUT=VSET

+2.2V≤VIN≤+15.0V, VOUT=VSET

-15.0V≤VIN≤-2.0V, VOUT=VSET

-15.0V≤VIN≤-2.2V, VOUT=VSET

2,3

01,03

.35

.60

.35

.60

%/V

Load Regulation VRLOAD

50µA≤IOUT1≤5.0mA

1mA≤IOUT2≤20.0mA

1mA≤IOUT1≤15.0mA, VOUT2

connected to VOUT1

1mA≤IOUT≤20.0mA

2,3

-25

-50

-135

-285

-70

-140

-135

-285

+25

+50

+135

+285

+70

+140

+135

+285

Reference Voltage VSET VOUT=VSET, IOUT=1mA

2,3

01,03

1.27

1.21

-1.33

-1.39

1.33

1.39

-1.27

-1.21

VSET Input Current ISET

VSET=0V, 2V

VSET=0V, -2V

2,3

01,03

-10

-25

-10

-25

+10

+25

+10

+25

Shutdown Input

Voltage VSHDN

VSHDNHI= Output OFF

VSHDNHI=Output OFF

2,3

01,03

1.4

1.5

-1.4

-1.5

Shutdown Input

Voltage VSHDN

VSHDNLO= Output ON

VSHDNLO=Outp ut ON

2,3

01,03

02 -0.3

-0.2

0.3

0.2 V

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 3 of 8

PARAMETER Symbol CONDITIONS

-55 °C <=TA<= +125°C 1/

Unless otherwise specified

Group A

Subgroup Device

type Limits

Min

Limits

Max Units

Shutdown Input

Current ISHDN

VSHDN= 0V, 9V

VSET=0V, -9V

2,3

01,03

-10

-25

-10

-25

+10

+25

+10

+25

Output Current

NOTE 3 IOUT VIN=2.5V, VIN-VOUT=1.5V

VIN=3.0V, VIN-VOUT=2.0V

2,3 01,03 40

20 mA

LBI Input

Threshold Voltage VLBI 1

2,3 03 1.21

1.20 1.37

1.38 V

LBI Input Current ILBI VLBI=0V, 9V 1

2,3 03 -10

-25 +10

+25 nA

Input/Output

Saturation

Resistance

RSAT VIN=2.0V, IOUT1=1.0mA

VIN=2.2V, IOUT1=1.0mA

VIN=9.0V, IOUT1=2.0mA

VIN=15.0V, IOUT1=5.0mA

2,3

01 500

1000

150

300

150

300

Ω

Input/Output

Saturation

Resistance

RSAT VIN=-2.0V, IOUT1=-1.0mA,

VOUT1 connected to VOUT2

VIN=-2.2V, IOUT1=-1.0mA,

VOUT1 connected to VOUT2

VIN=-9.0V, IOUT1=-2.0mA

VOUT2 connected to VOUT1

VIN=-15.0V, IOUT1=-5.0mA

VOUT2 connected to VOUT1

2,3

02 500

1000

150

Ω

Mini mu m Lo ad

Current IL(min) 1

2,3

01,03

-1

-10

10 µA

LBO Output

Saturation

Resistance

ROSAT ISAT=2mA, VLBI=0V 1

2,3 03 100

200 Ω

VCT Sink Current ITC NOTE 4 1,2,3 01 2mA

VCT Voltage VTC NOTE 4, ITC=50µA1

2,3 01 0.6

0.2 1.0

1.4 V

LBO Output

Leakage Current ILBO VLBI=1.4V, VLBO=9V 1,2,3 03 2µA

NOTE 1: Unless otherwise specified: VIN=+9V and VOUT=+5.0V for device types 01 and 03.

VIN=-9V and VOUT=-5.0V for device type 02.

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 4 of 8

NOTE 2: The algebraic convention, whereby the most negative value is a minimum and the mo st positive a

maximum, is used in this table. Negative current shall be defined as conventional current flow out

of a device terminal.

NOTE 3: VIN-VOUT is given as a maximum differential voltage under specified output current conditions.

For device type 01, output current is from VOUT2.

NOTE 4: Output has a positive temperature coefficient. Using it in conjunctio n with the input of the regulator

at VSET, a negative coefficient results in the output voltage. The VTC pin will not source current.

TERMINAL

NUMBER 01

MAX663 02

MAX664 03

MAX666

1Sense V

OUT2 Sense

OUT2 Sense VOUT

OUT1 SHDN LBI

4 GND VIN ( -) GND

5 SHDN SHDN SHDN

SET VSET VSET

TC VOUT1 LBO

IN (+) GND VIN(+)

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 5 of 8

BLOCK DIAGRAMS:

DEVICE TYPE 01: See New Release Data Book 1992 4-128.

DEVICE TYPE 02: See New Release Data Book 1992 4-129.

DEVICE TYPE 03: See New Release Data Book 1992 4-129.

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 6 of 8

QUALITY ASSURAN CE

Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in Mil-

Std-883.

Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:

1. Test Condition, A, B, C, or D.

2. TA = +125°C mini mum.

3. Interim and final electrical test requirements shall be specified in Table 2.

Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B,

C, and D inspection.

Group A inspection:

1. Tests as specified in Table 2.

2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.

Group C and D inspections:

a. End-point electrical parameters shall be specified in Table 1.

b. Steady-state life test, Method 1005 of Mil-Std-883:

1. Test condition A, B, C, D.

2. TA = +125°C, minimu m.

3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.

TABLE 2. ELECTRICAL TEST REQUIREMENTS

Mil-Std-883 Test Requirements Subgroups

per Method 5005, Table 1

Interim Electric Parameters

Method 5004 1

Final Electrical Parameters

Method 5005 1*, 2, 3

Group A Test Requirements

Method 5005 1, 2, 3

Group C and D End-Point Electrical Parameters

Method 5005 1

* PDA applies to Subgroup 1 only.

---------------------------- Electrical Characteristics of MAX663/664/666 19-0073 Rev. C

/883B for /883B and SMD 5962-92126 Page 7 of 8