http://www.tracopower.com Page 1 of 3
Features
◆ Wide 2:1 input range
◆ Full SMD-design
◆ High efficiency up to 86%
◆ Extended operating temperature
range –40°C to 85°C
◆ I/O isolation 1’500 VDC
◆ Indefinite short circuit protection
◆ Input filter to meet EN 55022, class A
and FCC, level A without external
components
◆ Shielded metal case with insulated
baseplate
◆ 24-pin DIP with industry standard pinout
◆ High reliability, MTBF >1 Mio. h
◆ 3-year product warranty
DC/DC Converters
TEN 5 Series, 6 Watt
The TEN 5 Series is a range of DC/DC-converter modules with wide input range
of 2:1. State of the art SMD-technology guarantees a product with very high re-
liability and good cost /performance ratio. I/O-isolation of 1’500 VDC together
with conducted noise compliance to EN 55022-A and FCC level A makes these
converters ideal for a wide range of applications in communications, mobile bat-
tery powered equipments and industrial systems.
Ordercode Input voltage range Output voltage Output current max. Efficiency typ.
TEN 5-0510 3.3 VDC 1200 mA 75 %
TEN 5-0511 5 VDC 1000 mA 79 %
TEN 5-0512 12 VDC 500 mA 82 %
TEN 5-0513 4.5 – 7 VDC 15 VDC 400 mA 82 %
TEN 5-0521 (5 VDC nominal) ±5 VDC ±500 mA 79 %
TEN 5-0522 ±12 VDC ±250 mA 82 %
TEN 5-0523 ±15 VDC ±200 mA 82 %
TEN 5-1210 3.3 VDC 1200 mA 77 %
TEN 5-1211 5 VDC 1000 mA 81 %
TEN 5-1212 12 VDC 500 mA 84 %
TEN 5-1213 9 – 18 VDC 15 VDC 400 mA 84 %
TEN 5-1221 (12 VDC nominal) ±5 VDC ±500 mA 81 %
TEN 5-1222 ±12 VDC ±250 mA 84 %
TEN 5-1223 ±15 VDC ±200 mA 84 %
TEN 5-2410 3.3 VDC 1200 mA 79 %
TEN 5-2411 5 VDC 1000 mA 83 %
TEN 5-2412 12 VDC 500 mA 86 %
TEN 5-2413 18 – 36 VDC 15 VDC 400 mA 86 %
TEN 5-2421 (24 VDC nominal) ±5 VDC ±500 mA 83 %
TEN 5-2422 ±12 VDC ±250 mA 86 %
TEN 5-2423 ±15 VDC ±200 mA 86 %
TEN 5-4810 3.3 VDC 1200 mA 79 %
TEN 5-4811 5 VDC 1000 mA 83 %
TEN 5-4812 12 VDC 500 mA 86 %
TEN 5-4813 36 – 75 VDC 15 VDC 400 mA 86 %
TEN 5-4821 (48 VDC nominal) ±5 VDC ±500 mA 83 %
TEN 5-4822 ±12 VDC ±250 mA 86 %
TEN 5-4823 ±15 VDC ±200 mA 86 %
Models
C B
Scheme
UL 60950 -1
http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load 5 Vin models: 80 mA typ.
12 Vin models: 30 mA typ.
24 Vin models: 15 mA typ.
48 Vin models: 8 mA typ.
Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC (or lower)
under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC (or lower)
24 Vin models: 16.0 VDC / 16.0 VDC (or lower)
48 Vin models: 32.0 VDC / 32.0 VDC (or lower)
long term operation at undervoltage will
demage the converter!
Surge voltage (1 sec. max.) 5 Vin models: 10 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Reverse voltage protection 1.0 A max.
Conducted noise (input) EN 55022 class A, FCC part 15, level A
Output Specifications
Voltage set accuracy 1.0 %
Regulation – Input variation Vin min. to Vin max. 0.3 % max.
– Load variation 20 – 100 %
single output models: 1.0 % max.
dual output models balanced load: 2.0 % max.
dual output models unbalanced load: 5.0 % max. (25 % / 100 %)
Minimum load 5 % of rated max current (operation at lower
load condition is safe but a higher output ripple
will be experienced)
Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ., 75 mVpk-pk max.
Temperature coefficient ±0.02 %/K
Output current limitation >120 % of Iout max., foldback
Short-circuit protection indefinite (automatic recovery)
Start up time (nominal Vin and constant resistive load) 10 ms typ. (for power on and remote on)
Capacitive load single output models: 6800 µF max.
dual output models: 1000 µF max. (each output)
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +90°C max.
– Storage –50°C to +125°C
Derating 3.3 %/K above 70°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h
Isolation voltage (60 sec.) – Input/Output 1’500 VDC
Isolation capacitance – Input/Output 380 pF typ.
Isolation resistance – Input/Output >1‘000 M Ohm (500 VDC)
Switching frequency 300 kHz typ. (Pulse frequency modulation PFM)
Safety standards UL 60950-1, IEC/EN 60950-1
Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf
– RoHS directive 2011/65/EU
DC/DC Converters
TEN 5 Series 6 Watt
Page 3 of 3
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
DC/DC Converters
TEN 5 Series 6 Watt
Outline Dimensions
Physical Specifications
Casing material steel, metal
Baseplate material non conductive FR4
Potting material epoxy (UL 94V-0 rated)
Weight 16.9 g (0.59 oz)
Soldering temperature max. 260°C / 10 sec.
Insulated Baseplate
20.3
4.5
31.8
10.2
4.1
15.22
11
9
22
23 2
3
14
16
Bottom view
2.54
15.24
2.54
5.08
(0.6)
(0.8)
(0.1)
(0.4)
(0.16)
(1.25)
(0.18)
(0.1)
(0.2)
(0.6)
Pin Single Dual
2–Vin (GND) –Vin (GND)
3–Vin (GND) –Vin (GND)
9No pin Common
11 No con. –Vout
14 +Vout +Vout
16 –Vout Common
22 +Vin (Vcc) +Vin (Vcc)
23 +Vin (Vcc) +Vin (Vcc)
Pin-Out
Rev. July 13, 2018
Dimensions in [mm], () = Inch
Pin diameter ø 0.5 ±0.05 (0.02 ±0.002)
Tolerances ±0.25 (±0.01)
Pin pitch tolerances ±0.13 (±0.005)
Supporting documents: www.tracopower.com/overview/ten5
