NTA4151P, NTE4151P Small Signal MOSFET -20 V, -760 mA, Single P-Channel, Gate Zener, SC-75, SC-89 Features * * * * * http://onsemi.com Low RDS(on) for Higher Efficiency and Longer Battery Life Small Outline Package (1.6 x 1.6 mm) SC-75 Standard Gullwing Package ESD Protected Gate Pb-Free Packages are Available V(BR)DSS RDS(on) TYP ID MAX 0.26 W @ -4.5 V 0.35 W @ -2.5 V -20 V -760 mA 0.49 W @ -1.8 V Applications * * * * High Side Load Switch DC-DC Conversion Small Drive Circuits Battery Operated Systems such as Cell Phones, PDAs, Digital Cameras, etc. P-Channel MOSFET D MAXIMUM RATINGS (TJ = 25C unless otherwise stated) Parameter Symbol Value Units Drain-to-Source Voltage VDSS -20 V Gate-to-Source Voltage VGS 6.0 V ID -760 mA Continuous Drain Current (Note 1) Power Dissipation (Note 1) SC-75 SC-89 Steady State PD mW 301 313 Steady State IDM 1000 mA TJ, TSTG -55 to 150 C Continuous Source Current (Body Diode) IS -250 mA Lead Temperature for Soldering Purposes (1/8 in from case for 10 s) TL 260 C ESD 1800 V Pulsed Drain Current tp =10 ms Operating Junction and Storage Temperature Gate-to-Source ESD Rating - (Human Body Model, Method 3015) S MARKING DIAGRAM & PIN ASSIGNMENT 3 2 1 SC-75 / SOT-416 CASE 463 STYLE 5 3 Drain xx M G G 3 2 1 1 Gate 2 Source SC-89 CASE 463C THERMAL RESISTANCE RATINGS Junction-to-Ambient - Steady State (Note 1) SC-75 SC-89 G C/W RqJA 415 400 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Surface mounted on FR4 board using 1 in sq pad size (Cu area = 1.127 in sq [1 oz] including traces). xx M G = Device Code = Date Code* = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. (c) Semiconductor Components Industries, LLC, 2006 September, 2006 - Rev. 5 1 Publication Order Number: NTA4151P/D NTA4151P, NTE4151P ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise stated) Parameter Symbol Test Condition Min Typ Max Unit V(BR)DSS VGS = 0 V, ID = -250 mA -20 Zero Gate Voltage Drain Current IDSS VGS = 0 V, VDS = -16 V -1.0 -100 nA Gate-to-Source Leakage Current IGSS VDS = 0 V, VGS = 4.5 V $1.0 $10 mA W OFF CHARACTERISTICS Drain-to-Source Breakdown Voltage V ON CHARACTERISTICS (Note 2) Gate Threshold Voltage VGS(TH) VDS = VGS, ID = -250 mA Drain-to-Source On Resistance RDS(on) VGS = -4.5 V, ID = -350 mA 0.26 0.36 VGS = -2.5 V, ID = -300 mA 0.35 0.45 VGS = -1.8 V, ID = -150 mA 0.49 1.0 gFS VDS = -10 V, ID = -250 mA 0.4 S VGS = 0 V, f = 1.0 MHz, VDS = -5.0 V 156 pF Forward Transconductance -0.45 V CHARGES AND CAPACITANCES Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 28 18 VGS = -4.5 V, VDD = -10 V, ID = -0.3 A Total Gate Charge QG(TOT) Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS 0.325 Gate-to-Drain Charge QGD 0.5 nC 2.1 0.125 SWITCHING CHARACTERISTICS (Note 3) Turn-On Delay Time td(ON) Rise Time tr Turn-Off Delay Time VGS = -4.5 V, VDD = -10 V, ID = -200 mA, RG = 10 W 8.2 td(OFF) 29 tf 20.4 Fall Time ns 8.0 DRAIN-SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD VGS = 0 V, IS = -250 mA -0.72 -1.1 V 2. Pulse Test: pulse width 300 ms, duty cycle 2%. 3. Switching characteristics are independent of operating junction temperatures. ORDERING INFORMATION Marking Package Shipping NTA4151PT1 TN SC-75 3000/Tape & Reel NTA4151PT1G TN SC-75 (Pb-Free) 3000/Tape & Reel NTE4151PT1G TM SC-89 (Pb-Free) 3000/Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 NTA4151P, NTE4151P TYPICAL ELECTRICAL CHARACTERISTICS 0.6 0.7 VDS w -10 V 0.6 -ID, DRAIN CURRENT (AMPS) -ID, DRAIN CURRENT (AMPS) TJ = 25C -1.5 V 0.5 VGS = -1.75 V to -4.5 V 0.4 -1.25 V 0.3 0.2 0.1 -1.0 V 0.5 0.4 0.3 0.2 TJ = 25C TJ = 125C 0.1 TJ = -55C 0 0.5 1.0 1.5 2.0 2.5 0 3.0 0.4 1.6 Figure 2. Transfer Characteristics 0.5 0.4 TJ = 125C 0.3 TJ = 25C TJ = -55C 0.2 0.1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 2.0 0.6 VGS = -2.5 V 0.5 TJ = 125C 0.4 TJ = 25C 0.3 TJ = -55C 0.2 0.1 0 0 0.1 0.2 -ID, DRAIN CURRENT (AMPS) 0.3 0.4 0.5 0.6 0.7 -ID, DRAIN CURRENT (AMPS) Figure 3. On-Resistance vs. Drain Current and Temperature Figure 4. On-Resistance vs. Drain Current and Temperature 1.6 250 ID = - 0.35 A VGS = -4.5 V TJ = 25C C, CAPACITANCE (pF) RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) 1.2 Figure 1. On-Region Characteristics VGS = -4.5 V 1.4 0.8 -VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) 0.6 0 0 0 -VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0 1.2 1.0 0.8 0.6 -50 200 CISS 150 100 COSS 50 -25 0 25 50 75 100 125 150 0 CRSS 0 TJ, JUNCTION TEMPERATURE (C) 4 8 12 16 DRAIN-TO-SOURCE VOLTAGE (VOLTS) Figure 5. On-Resistance Variation with Temperature Figure 6. Capacitance Variation http://onsemi.com 3 20 NTA4151P, NTE4151P 0.7 5 QT -IS, SOURCE CURRENT (AMPS) -VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS 4 3 QGS 2 QGD VDS = -10 V ID = -0.3 A TA = 25C 1 0 0 0.4 2.0 0.8 1.2 1.6 QG, TOTAL GATE CHARGE (nC) VGS = 0 V 0.6 0.5 0.4 0.3 0.1 TJ = 25C 0 2.4 r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE 0.1 0 0.2 0.4 0.6 0.8 1.0 -VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS) Figure 8. Diode Forward Voltage vs. Current Figure 7. Gate-to-Source Voltage vs. Total Gate Charge 1.0 TJ = 125C 0.2 D = 0.5 0.2 0.1 0.05 0.02 0.01 0.01 SINGLE PULSE 0.001 0.00001 0.0001 0.001 0.01 0.1 t, TIME (s) 1.0 Figure 9. Normalized Thermal Response http://onsemi.com 4 10 100 1000 NTA4151P, NTE4151P PACKAGE DIMENSIONS SC-75/SOT-416 CASE 463-01 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. -E- 2 3 b 3 PL 0.20 (0.008) e -D- DIM A A1 b C D E e L HE 1 M D 0.20 (0.008) E HE C STYLE 5: PIN 1. GATE 2. SOURCE 3. DRAIN A L MILLIMETERS MIN NOM MAX 0.70 0.80 0.90 0.00 0.05 0.10 0.15 0.20 0.30 0.10 0.15 0.25 1.55 1.60 1.65 0.70 0.80 0.90 1.00 BSC 0.10 0.15 0.20 1.50 1.60 1.70 A1 SOLDERING FOOTPRINT* 0.356 0.014 1.803 0.071 0.787 0.031 0.508 0.020 1.000 0.039 SCALE 10:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 INCHES NOM 0.031 0.002 0.008 0.006 0.063 0.031 0.04 BSC 0.004 0.006 0.061 0.063 MIN 0.027 0.000 0.006 0.004 0.059 0.027 MAX 0.035 0.004 0.012 0.010 0.067 0.035 0.008 0.065 NTA4151P, NTE4151P SC-89, 3 LEAD CASE 463C-03 ISSUE C A -X- 3 1 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 463C-01 OBSOLETE, NEW STANDARD 463C-02. B -Y- S K G 2 PL D 0.08 (0.003) M DIM A B C D G H J K L M N S 3 PL X Y N M C J -T- MILLIMETERS MIN NOM MAX 1.50 1.60 1.70 0.75 0.85 0.95 0.60 0.70 0.80 0.23 0.28 0.33 0.50 BSC 0.53 REF 0.10 0.15 0.20 0.30 0.40 0.50 1.10 REF --- --- 10 _ --- --- 10 _ 1.50 1.60 1.70 INCHES NOM MAX 0.063 0.067 0.034 0.040 0.028 0.031 0.011 0.013 0.020 BSC 0.021 REF 0.004 0.006 0.008 0.012 0.016 0.020 0.043 REF --- --- 10 _ --- --- 10 _ 0.059 0.063 0.067 MIN 0.059 0.030 0.024 0.009 SEATING PLANE SOLDERING FOOTPRINT* H H L G *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTA4151P/D