www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
D-12
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Series 801
D
Series 801 Mighty Mouse Double-Start ACME Thread
Plug with Crimp Contacts
801-007 and 801-008 Ordering Information
Series 801 Mighty Mouse Connector features a double-start stub ACME thread
for improved protection against cross-mating and thread damage. Connector shells
are machined aluminum or stainless steel. Supplied with crimp contacts, packaged
separately. Terminate contacts with standard M22520 tools. Metal clips inside the
connector body lock contact into place. Contacts are removable. Fluorosilicone
seals and rear grommet protect connector from water ingress. Terminate cable
shield directly to band platform with Band-Master™ ATS strap or choose rear
accessory thread to attach optional cable clamp or backshell.
How To Order
Sample Part Number 801007 16 M 94 P A
Series (See Table I) 801-007 = With Banding Platform
801-008 = With Rear Accessory Thread
Shell Style -16 = Plug with Anti-Decoupling Spring
-26 = Self-Locking Plug with Ratchet Mechanism
Shell Material and Finish
C = Aluminum / Black Anodize (Non-Conductive) RoHS Compliant
M = Aluminum / Electroless Nickel RoHS Compliant
NF = Aluminum / Cadmium with Olive Drab Chromate
ZN = Aluminum / Zinc-Nickel with Olive Drab Chromate
ZNU = Aluminum / Zinc-Nickel with Black Chromate
MT = Aluminum / Nickel-PTFE RoHS Compliant
Z1 = Stainless Steel / Passivated RoHS Compliant
Shell Size - Insert
Arrangement See Contact Arrangements page D-
Contact Type
Connector supplied Connector supplied Connector supplied
with crimp contacts without contacts with 30 AWG crimp contacts
P = Pin A = Pin Connector G = #23 Pin
S = Socket B = Socket Connector H = #23 Socket
Connectors with signal and/or power crimp contacts are not installed.
Coaxial contacts and non-standard signal contacts are ordered separately.
Polarization (See Table II) A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F G = Pos. G H = Pos. H J = Pos. J
Table I: Series
-
Banding Platform
-
Rear Accessory
Thread
Table II: Key Positions
B° A°
Position A° B°
A° °
B° °
C° °
D° °
E° °
F° °
Rev. 05.23.19
NOTES
1. Contacts are crimp type, and used in a
rear release retention system
2. Plug mates with all quick coupling high
density receptacle connectors with
same polarization and opposite contact
gender (801-003 through 801-006 and
801-009 through 801-012)
3. Connectors supplied with standard
crimp contacts. For coax or other
special contacts, order connector
less contacts and and order contacts
separately
4. For all insert arrangements with size #8
contacts, add .320” to overall length.
For -26 shell style, add .127”. For both,
add .447”
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
D-13
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Series 801
D
Rev. 05.23.19
1.130 MAX
B THREAD
MASTER
KEY
ø A
ø C
STRAIGHT KNURL
B THREAD
D THREAD
1.090 MAX
2 SAFETY WIRE
HOLES AT 180°
SHIELD
TERMINATION
PLATFORM
Dimensions
Shell
Size Ø A Style Ø A Style B Thread Ø C D Thread
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
. (.) . (.) .-.P-.L-DS-B . (.) .- UNEF-A
Series 801 Mighty Mouse Double-Start ACME Thread
Plug with Crimp Contacts
801-007 and 801-008 Dimensions
Plug connector
Integral Band Platform
801-007
Accessory Thread
801-008
FACE VIEW OF PLUG AS
VIEWED FROM ENGAING END.
SOCKET SIZE 9 SHOWN
Material / nish:
• Plug barrel, coupling nut: Aluminum Alloy or CRES; see How to
Order Table
• Insulator: High grade rigid dielectric / N.A.
• Interfacial seal, grommet seal: uorosilicone / N.A.
• Contact: copper alloy / gold plate per ASTM B 488, Type II,
Code C, Class 1.25, over a suitable underplate
