P7SA-10F-ND-PU DC24 - OMRON

New Product

Relays with Forcibly Guided Contacts

G7SA

Compact, Slim Relays Conforming to

EN Standards

• Additional Push-In Plus terminal sockets are used to save

wiring work in comparison with traditional screw terminals.

(Wiring time is reduced by 60%* in comparison with

traditional screw terminals.)

• Relays with forcibly guided contacts

(EN 50205 Class A, certified by VDE).

• Supports the CE marking of machinery (Machinery

Directive).

• Helps avoid hazardous machine status when used as part of

an interlocking circuit.

• Four-pole and six-pole Relays are available.

• The Relay’s terminal arrangement simplifies PWB pattern

design.

• Reinforced insulation between inputs and outputs.

Reinforced insulation between some poles of different polarity.

*According to OMRON actual measurement data

Model Number Structure

Model Number Legend Specify the power supply voltage (coil rated voltage) when ordering.

For the most recent information on models that have been

certified for safety standards, refer to your OMRON website.

Note: Sockets are sold separately.

Be sure to read the Safety Precautions on page 9.

Relays with forcibly guided contacts

G7SA-@A@B@

⎯⎯⎯

1 2 3

1. NO Contact Poles 2. NC Contact Poles

2: DPST-NO 1: SPST-NC

3: 3PST-NO 2: DPST-NC

4: 4PST-NO 3: 3PST-NC

5: 5PST-NO

3. Coil Rated Voltage (V)

12 VDC

18 VDC

21 VDC

24 VDC

48 VDC

110 VDC

Sockets

P7SA-@@-@-@@

⎯⎯⎯⎯ ⎯ ⎯ ⎯ ⎯ ⎯

1 2 3 4 5 6

1. Basic Model Name

P7SA: Socket for G7SA

2. Number of Poles

10: 4 poles (10 terminals)

14: 6 poles (14 terminals)

3. Mounting Type

F: Front-mounting

P: Back-mounting

4. LED Indicator

Blank: Without operation indicator LED/built-in diode

ND: With operation indicator LED/built-in diode

5. Terminal Type

Blank: Screw terminals when 3. is F type

PCB terminals when 3. is P type

PU: Push-In Plus terminals

6. Coil Rated Voltage (V)

24 VDC: When 4. is ND

G7SA

Ordering Information

Relays with Forcibly Guided Contacts

Sockets

Accessories (Order Separately)

Short Bars (For P7SA-@F-ND-PU)

Note: Use for crossover wiring of adjacent contact terminals (bottom) within one Socket.

*1. Replace the box (@) in the model number with the code for the covering color. Color Options: RD = red, BL = blue, YL = yellow

Example: XW5S-P2.5-10RD when the covering color is red.

*2. XW5S-P2.5-5@ cannot be used with P7SA-10F-ND-PU.

Parts for DIN Track Mounting

Refer to your OMRON website for details on the PFP-@.

*When mounting DIN track, please use End Plate (Model PFP-M).

Specify the coil rated voltage when ordering.

Type Sealing Poles Contact configuration Coil rated voltage Model

Standard Flux-tight

4 poles 3PST-NO, SPST-NC 12, 18, 21, 24, 48, 110 VDC G7SA-3A1B

DPST-NO, DPST-NC 12, 18, 21, 24, 48, 110 VDC G7SA-2A2B

6 poles

5PST-NO, SPST-NC 12, 18, 21, 24, 48, 110 VDC G7SA-5A1B

4PST-NO, DPST-NC 12, 18, 21, 24, 48, 110 VDC G7SA-4A2B

3PST-NO, 3PST-NC 12, 18, 21, 24, 48, 110 VDC G7SA-3A3B

Mounting Terminal Type LED

Indicator Poles Coil rated voltage Model

Front-mounting

Push-In Plus terminals Yes 4 poles

24 VDC

P7SA-10F-ND-PU

6 poles P7SA-14F-ND-PU

Screw terminals

Yes 4 poles P7SA-10F-ND

6 poles P7SA-14F-ND

No 4 poles P7SA-10F

6 poles P7SA-14F

Back-mounting PCB terminals No 4 poles P7SA-10P

6 poles P7SA-14P

Pitch No. of poles Colors Model*1*2

5.2 mm

Red (RD)

Blue (BL)

Yellow (YL)

XW5S-P2.5-2@

3XW5S-P2.5-3@

4XW5S-P2.5-4@

5XW5S-P2.5-5@

Type Model Minimum Order

(quantity)

DIN Tracks 1 m PFP-100N 1

0.5 m PFP-50N

End Plate *PFP-M 10

Spacer PFP-S

G7SA

Specifications

Ratings

Coil (4 poles)

Coil (6 poles)

Note: 1. The rated current and coil resistance are measured at a coil

temperature of 23°C with tolerances of ±15%.

2. The maximum voltage is based on an ambient operating

temperature of 23°C maximum.

Contacts

Characteristics

Note: 1. The above values are initial values.

2. Performance characteristics are based on coil temperature of 23°C.

*1. The contact resistance was measured with 1 A at 5 VDC using the voltage-drop method.

*2. These times were measured at the rated voltage and an ambient temperature of 23°C. Contact bounce time is not included.

*3. The response time is the time it takes for the normally open contacts to open after the coil voltage is turned OFF. Contact bounce time is

included. Measurement conditions: Rated voltage operation, Ambient temperature: 23°C

*4. The insulation resistance was measured with a 500-VDC megohmmeter at the same locations as the dielectric strength was measured.

*5. Pole 3 refers to terminals 31-32 or 33-34, pole 4 refers to terminals 43-44, pole 5 refers to terminals 53-54, and pole 6 refers to terminals 63-64.

*6. When using a P7SA Socket, the dielectric strength between coil contacts/different poles is 2,500 VAC, 50/60 Hz for 1 min. When using Push-

In Plus terminal sockets (P7SA-@F-ND-PU), the dielectric strength between coil contacts as well as between different poles is 4,000 VAC, 50/

60 Hz for 1 min.

*7. The durability is for an ambient temperature of 15 to 35°C and an ambient humidity of 25% to 75%. For the durability performance to the load,

refer to the Durability Curve.

*8. AC15: cosφ = 0.3, DC13: L/R = 48-ms.

*9. The failure rate is based on an operating frequency of 300 operations/min.

*10. 12 to 48 VDC: When operating between 70 and 85°C, reduce the rated carry current of 6 A by 0.1 A for each degree above 70°C.

110 VDC: When operating between 40 and 60°C, reduce the rated carry current of 6 A by 0.27 A for each degree above 40°C.

Rated voltage

Item Rated

current

(mA)

Coil

resistance

(Ω)

Max.

voltage

(V)

Power

consumption

(mW)

12 VDC 30 400

110% Approx. 360

18 VDC 20 900

21 VDC 17.1 1,225

24 VDC 15 1,600

48 VDC 7.5 6,400

110 VDC 3.8 28,810 Approx. 420

Rated voltage

Item Rated

current

(mA)

Coil

resistance

(Ω)

Max.

voltage

(V)

Power

consumption

(mW)

12 VDC 41.7 288

110% Approx. 500

18 VDC 27.8 648

21 VDC 23.8 882

24 VDC 20.8 1,152

48 VDC 10.4 4,606

110 VDC 5.3 20,862 Approx. 580

Item Load Resistive load

Rated load 6 A at 250 VAC, 6 A at 30 VDC

Rated carry current 6 A

Max. switching voltage 250 VAC, 125 VDC

Max. switching current 6 A

Contact materials Au plating + Ag alloy

Contact resistance *1100 mΩ max.

Operating time *220 ms max.

Response time *310 ms max.

Release time *220 ms max.

Must operate voltage 75% max.

Must release voltage 10% min.

Maximum operating

frequency

Mechanical 36,000 operations/h

Rated load 1,800 operations/h

Insulation resistance *41,000 MΩ min.

Dielectric Strength

*5 *6

Between coil and

contacts 4,000 VAC, 50/60 Hz for 1 min.

Between

contacts of

different polarity

4,000 VAC, 50/60 Hz for 1 min. (except for followings)

4 poles (for poles 3-4 in 4-pole Relays),

6 poles (for poles 3-5, 4-6, and 5-6 in 6-pole Relays): 2,500 VAC, 50/60 Hz for 1 min.

Between contacts

of the same polarity

1,500 VAC, 50/60 Hz for 1 min.

Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)

Shock resistance Destruction 1,000 m/s2

Malfunction 100 m/s2

Durability *7Mechanical 10,000,000 operations min. (at approx. 36,000 operations/h)

Electrical 100,000 operations min. (at the rated load and approx. 1,800 operations/h)

Inductive load switching capability

(IEC60947-5-1)

AC15 AC240V 2A

DC13 DC24V 1A

Failure rate (P level)

(reference value *9) 5 VDC, 1 mA

Ambient operating temperature

*10 12 to 48 VDC: -40 to 85°C (with no icing or condensation)

110 VDC: -40 to 60°C (with no icing or condensation)

Ambient operating humidity 5% to 85%

Weight 4 poles: Approx. 22 g

6 poles: Approx. 25 g

G7SA

Characteristics of Sockets

*1. When operating the P7SA-@F-ND-PU at a temperature between 50 and 70°C, reduce the continuous current (6 A at 50°C or less) by 0.25 A

for each degree above 50°C.

When operating the P7SA-@F-ND at a temperature between 50 and 70°C, reduce the continuous current (6 A at 50°C or less) by 0.3 A for

each degree above 50°C.

When operating the P7SA-@F at a temperature between 50 and 85°C, reduce the continuous current (6 A at 50°C or less) by 0.1 A for each

degree above 50°C.

*2. Measurement conditions: For 500 VDC applied to the same location as for dielectric strength measurement.

Engineering Data

Durability Curve

Ambient temperature and contact current

*1. When using a G7SA-5A1B relay, be careful not to exceed the total current (24 A).

(Example: at 50°C, 5 contacts × 4.8 A)

*2. Certification conditions for the TÜV certification. Care should be taken not to exceed the total current.

Push-In Plus terminals Screw terminals PCB terminals

4 poles 6 poles 4 poles 6 poles 4 poles 6 poles

Items Models

P7SA-10F-ND-PU P7SA-14F-ND-PU

P7SA-10F(-ND) P7SA-14F(-ND) P7SA-10P P7SA-14P

Ambient operating temperature

• With operation indicator LED/built-in diode

P7SA-@F-ND(-PU): −20 to +70°C

• Without operation indicator LED/built-in diode

P7SA-@F: −40 to +85°C

(with no icing or condensation)

−40 to +85°C

(with no icing or condensation)

Ambient operating humidity 25% to 85% 5% to 85%

Continuous carry current 6 A *1

Dielectric

strength

Between coil and

contact terminals 4,000 VAC for 1 min.

2,500 VAC for 1 min.

Between contact

terminals of different

polarity

2,500 VAC for 1 min.

Between contact

terminals of same

polarity

1,500 VAC for 1 min.

Insulation resistance 1,000 MΩ min. *2

Weight Approx. 58 g Approx. 70 g Approx. 44 g Approx. 59 g Approx. 9 g Approx. 10 g

0.1

100

500

700

300

1,000

0.3 0.5

AC15, 240 VAC

DC13, 24 VDC

AC1, 240 VAC

DC1, 24 VDC

0.7 1 3 5 7 10

No. of operations (× 104 operations)

Contact current (A)

G7SA-@A@B

P7SA-@F-ND-PU

Total*1 1 circuit

-20 -10 010 20 30 40 50 60 70 80

Ambient temperature (°C)

Total*2

-10F -14F

5.4

12.6

10.2

7.8

Contact current (A)

-20

-30

-40 -10 010 20 30 40 50 60 70 80 90

Ambient temperature (°C)

Contact current (A)

P7SA-

F-ND

P7SA-@F

P7SA-@F-ND

P7SA-@F

G7SA

Dimensions (Unit: mm)

Relays with Forcibly Guided Contacts

G7SA-2A2B

G7SA-4A2B

G7SA-3A3B

Ten, 1.4 dia.

(±0.1 tolerance)

4 poles

G7SA-3A1B

G7SA-2A2B

6 poles

G7SA-5A1B

G7SA-4A2B

G7SA-3A3B

Terminal Arrangement/

Internal Connection Diagram

(Bottom View)

G7SA-3A1B

Printed Circuit Board

Design Diagram

(Bottom View)

Terminal Arrangement/

Internal Connection Diagram

(Bottom View)

G7SA-5A1B

Printed Circuit Board

Design Diagram

(Bottom View)

40 max.

0.5

13 max.

0.5

13.5

24 max.

11.43

5.085.08

13.97

10.16

(1.83)

11.43

5.085.085.085.08

13.97

10.16

(1.83)

13 max.

24 max.

3.5

0.5

50 max.

Fourteen, 1.4 dia.

442221

1211

−

＋

−

＋

442423

1211

−

＋

6463

5332

442221

1211

−

＋

6463

5334

442221

1211

−

＋

6463

5334

442423

1211

Note: 1. Terminals 23-24, 33-34,

and 43-44 are normally

open. Terminals 11-12 and

21-22 are normally closed.

2. The colors of the cards

inside the Relays are as

follows: G7SA-3A1B: Blue

and G7SA-2A2B: White.

Note: 1. Terminals 23-24, 33-34,

43-44, 53-54, and 63-64

are normally open.

Terminals 11-12, 21-22,

and 31-32 are normally

closed.

2. The colors of the cards

inside the Relays are as

follows: G7SA-5A1B: Blue,

G7SA-4A2B: White, and

G7SA-3A3B: Yellow.

G7SA

Sockets

Accessories (Order Separately)

Short Bars (for P7SA-@F-ND-PU)

XW5S-P2.5-@@

A1 A2 (1)(0)

12 44 2434

11 432333

A1 A2 (1)(0)

12 44 2234

11 432133

(4)

3.4

35.4

35.4 4.5

22.5

100

LED indicator

G7SA-3A1B Mounted

Terminals Arrangement/Internal Connections Diagram (Top View)

G7SA-2A2B Mounted

Front-mounting Sockets

Push-In Plus terminals 4 poles

P7SA-10F-ND-PU

Note: 1. The numbers in parentheses are traditionally used terminal numbers.

2. Terminals 23-24, 33-34, and 43-44 are normally open. Terminals 11-12

and 21-22 are normally closed.

A1 A2 (1)(0)

54 6434

2353

436333

A1 A2 (1)(0)

54 6434

21 53

436333

A1 A2 (1)(0)

54 6432

21 53

436331

3.4

35.4

35.4 4.5

27.7

100

(4)

G7SA-5A1B Mounted

Terminals Arrangement/Internal Connections Diagram (Top View)

G7SA-4A2B Mounted G7SA-3A3B Mounted

LED indicator

Push-In Plus terminals 6 poles

P7SA-14F-ND-PU

Note: 1. The numbers in parentheses are traditionally used terminal numbers.

2. Terminals 23-24, 33-34, 43-44, 53-54, and 63-64 are normally open.

Terminals 11-12, 21-22, and 31-32 are normally closed.

5.2

1.6

5.2 × (No. of poles −1) +3.7

Note: Use for crossover wiring of adjacent contact terminals (bottom) within one Socket.

*Replace the box (@) in the model number with the code for the covering color.

Color Options: RD = red, BL = blue, YL = yellow

Application Pitch Compatible models No. of

poles P (mm) Colors Model *

Maximum

carry

current

For

Contact

terminals

(bottom)

5.2 mm For P7SA-@F-ND-PU

2 5.2

Red (RD)

Blue (BL)

Yellow

(YL)

XW5S-P2.5-2@

24 A

3 10.4 XW5S-P2.5-3@

4 15.6 XW5S-P2.5-4@

5 20.8 XW5S-P2.5-5@

G7SA

Accessories (Order Separately)

Parts for DIN Track Mounting

Refer to your OMRON website for details about PFP-@.

44 33 34

11 1 0 11 1 0

44 33 34

22.5 max.

Ten,

M3×8

9 max. 5

9 max.

80±0.2

60.5 max.

72 max.

LED

indicator

4 dia.

14.5±0.2

Two, 4 dia.

or M3.5

G7SA-3A1B Mounted

Terminal Arrangement/Internal Connection Diagram (Top View)

Mounting Hole Placement Diagram (Top View)

G7SA-2A2B Mounted

* This display circuit is available only for "-ND" models.

Note: Terminals 23-24, 33-34, and 43-44 are normally open.

Terminals 11-12 and 21-22 are normally closed.

2: Only the -ND Sockets have LED indicators (orange)

Note 1: The front view shows with the finger cover removed.

Front-mounting Sockets

Screw terminals 4 poles

P7SA-10F, P7SA-10F-ND

The above figure shows with the finger cover mounted.

231 0 11

54 64

21 1 0 11

54 64

21 1 0 11

G7SA-5A1B

Mounted

Terminal Arrangement/Internal Connection Diagram (Top View)

Mounting Hole Placement Diagram (Top View)

G7SA-3A3B

Mounted

G7SA-4A2B

Mounted

30 max.

9 max.

80±0.2

60.5 max.

72 max.

4 dia.

22±0.2

Two, 4 dia.

or M3.5

Fourteen,

M3 × 8

LED

indicator

***

* This display circuit is available only for "-ND" models.

Note: Terminals 23-24, 33-34, 43-44, 53-54, and 63-64 are normally

open. Terminals 11-12, 21-22, and 31-32 are normally closed.

2: Only the -ND Sockets have LED indicators (orange).

Note 1: The front view shows with the finger cover removed.

Screw terminals 6 poles

P7SA-14F, P7SA-14F-ND

The above figure shows with the finger cover mounted.

G7SA

Back-mounting Sockets (for PCB)

PCB terminals 4 poles

P7SA-10P

PCB terminals 6 poles

P7SA-14P

Certified Standards

Relays with forcibly guided contacts

G7SA

• EN Standards, VDE Certified

EN 61810-1 (Electromechanical non-specified time all-or-nothing

relays)

EN 50205 (Relays with forcibly guided (linked) contacts)

• UL standard UL508 Industrial Control Devices

• CSA standard CSA C22.2 No. 14 Industrial Control Devices

• South Korea S-mark certified (Rated voltage 24VDC only)

KS C IEC 61810-1

EN 50205

• CQC GB/T 21711.1

Sockets

Screw terminals / PCB terminals

P7SA-@F-ND / P7SA-@P

• EN Standards, VDE Certified

EN 61984

• UL standard UL508 Industrial Control Devices

• CSA standard CSA C22.2 No. 14 Industrial Control Devices

Push-In Plus terminals

P7SA-@F-ND-PU

• EN Standards, TÜV Certified

EN 61984

• UL standard UL 508 Industrial Control Devices

• CSA standard CSA C22.2 No.14 Industrial Control Devices

Forcibly Guided Contacts (from EN 50205)

If an NO contact becomes welded, all NC contacts will maintain a minimum distance of 0.5 mm when the coil is not energized. Likewise if an NC

contact becomes welded, all NO contacts will maintain a minimum distance of 0.5 mm when the coil is energized.

(±0.1 tolerance)

Terminal Arrangement/Internal

Connection Diagram

(Bottom View)

Mounting Hole Placement

(Bottom View)

G7SA-3A1B Mounted

G7SA-2A2B Mounted

Note: Terminals 23-24, 33-34, and 43-44

are normally open. Terminals 11-12

and 21-22 are normally closed.

50 max.

0.50.5

15 max.

41.5 max.

3.5

(11.1)

0.4

(11.1)

Three, 2.6 dia.

(for M3 tapping screws)

24.8

4.1

39.9

0.8

24.8±0.2

39.9±0.2

Three, 3.2 dia.

(for M3 tapping

screws)

(7.14) 13.97 11.43

4.1±0.2

5.085.08 Ten, 1.1 dia.

10.16

442221

1211

−

＋

−

＋

442423

1211

(±0.1 tolerance)

Terminal Arrangement/

Internal Connection

Diagram (Bottom View)

Mounting Hole Placement

(Bottom View)

G7SA-5A1B Mounted

G7SA-4A2B Mounted

G7SA-3A3B Mounted

Note: Terminals 23-24, 33-34, 43-44,

53-54, and 63-64 are normally

open. Terminals 11-12, 21-22,

and 31-32 are normally closed.

60 max. 0.50.5

15 max.

41.5 max.

3.5

(11.1)(11.1)

0.4

Three, 2.6 dia.

(for M3 tapping screws)

49.9

24.8

4.1

0.8

24.8

±0.2

49.9

±0.2

(7.14) 13.97

5.08 5.08

4.1

±0.2

5.08 5.08

10.16

Three, 3.2 dia.

(for M3 tapping

screws)

11.43

Fourteen,

1.1 dia.

−

＋

6463

5332

442221

1211

−

＋

6463

5334

442221

1211

−

＋

6463

5334

442423

1211

G7SA

Safety Precautions

Be sure to read the Common Precautions for All Relays with Forcibly Guided Contacts at the following URL:

http://www.ia.omron.com/.

Warning Indications

Push-In Plus Terminal Sockets (P7SA-

F-ND-PU)

• Do not attempt to wire anything to the release holes.

• When you insert a flat-blade screwdriver into a release hole, do not

tilt or twist the screwdriver. The terminal block may be damaged.

• Insert a screwdriver into the release holes at an angle. The terminal

block may be damaged if the screwdriver is inserted straight in.

• Do not allow the flat-blade screwdriver to fall when you are holding

it in a release hole.

• Do not bend a wire past its natural bending radius or pull on it with

excessive force. Doing so may break the wires.

• Do not insert more than one wire into each terminal insertion hole.

• To prevent wiring materials from smoking or igniting, confirm wire

ratings and use the wiring materials given in the following table.

• Insert a flat-blade screwdriver all the way to the bottom of the

release hole. If the flat-blade screwdriver is not inserted correctly,

the wire may not be connected correctly.

• When crossover wiring with wires or short bars, make sure not to

insert them in the wrong position. It may cause a short circuit, a

malfunction, or a failure.

Wiring

• The coil terminals have polarity (+, −). Inverting the polarity when

wiring the terminals will cause the unit not to operate.

• The release time and the response time of the G7SA will be longer

when using the P7SA-@F-ND(-PU) because it has a built-in diode to

absorb coil surge. Because of that, confirm operation under actual

conditions before using the P7SA-@F-ND(-PU).

• If there is lubrication, such as oil, on the tip of the flat-blade screw-

driver, the flat-blade screwdriver may fall and possibly injure a

worker.

• Do not insert short bar in the hole for wire or screw driver, it may

cause the result of failure of pull out. If insert short bar in the hole

for wire or screw driver and try to pull out, it may cause damage for

short bar or socket.

Screw Terminal Sockets (P7SA-@F(-ND))

• Use one of the following wires to connect to the P7SA-@F(-ND).

Stranded wire: 0.75 to 1.5 mm2

Solid wire: 1.0 to 1.5 mm2

• Tighten the screws of the P7SA-@F(-ND) to a torque of 0.78 to

0.98 N·m.

Tighten firmly so as not to have any loose wires.

Cleaning

The G7SA is not of enclosed construction. Therefore, do not wash the

G7SA with water or detergent.

Mounting

The G7SA can be installed in any direction.

Mounting and Removing the Relays

• After mounting the relay, make sure to lock the lock hook. If not, the

relay may become loose upon vibration or impact.

• When removing the relay, (1) unlock the lock hook on the release

side, (2) then press the release lever.

• You can release the locked block easily by inserting a tip of a flat

screwdriver into the square hole.

Precautions

for Safe Use

Supplementary comments on what to do or

avoid doing to use the product safely.

Precautions

for Correct

Use

Supplementary comments on what to do or

avoid doing to prevent failure to operate,

malfunction, or undesirable effects on product

performance.

Precautions for Safe Use

Recommended wire Stripping length

(Ferrules not used)

0.25 to 1.5mm2/Equivalent to AWG24 to 16 8 mm

Precautions for Correct Use

Release hole

Terminal (insertion) hole

Short bar insertion holes

With the relay mounted Removing the relay

Lock hook

Release lever (2)

(1)

G7SA

Push-In Plus Terminal Sockets (P7SA-

F-ND-PU)

1. Connecting Wires to the Push-In Plus Terminal Block

Part Names of the Terminal Block

Connecting Wires with Ferrules and Solid Wires

Insert the solid wire or ferrule straight into the terminal block until the

end strikes the terminal block.

• If a wire is difficult to connect because it is too thin, use a flat-blade

screwdriver in the same way as when connecting stranded wire.

Connecting Stranded Wires

Use the following procedure to connect the wires to the terminal block.

1. Hold a flat-blade screwdriver at an angle and insert it into the

release hole.

The angle should be between 10° and 15°. If the flat-blade

screwdriver is inserted correctly, you will feel the spring in the

release hole.

2. With the flat-blade screwdriver still inserted into the release hole,

insert the wire into the terminal hole until the end strikes the

terminal block.

Remove the flat-blade screwdriver from the release hole.

Checking Connections

• After the insertion, pull gently on the wire to make sure that it will

not come off and the wire is securely fastened to the terminal block.

• If you use a ferrule with a conductor length of 10 mm, part of the

conductor may be visible after the ferrule is inserted into the

terminal block, but the product insulation distance will still be

satisfied.

2. Removing Wires from the Push-In Plus Terminal Block

Use the following procedure to remove wires from the terminal block.

The same method is used to remove stranded wires, solid wires, and

ferrules.

1. Hold a flat-blade screwdriver at an angle and insert it into the

release hole.

2. With the flat-blade screwdriver still inserted into the release hole,

remove the wire from the terminal insertion hole.

Remove the flat-blade screwdriver from the release hole.

3. Recommended Ferrules and Crimp Tools

Recommended ferrules

Note: 1. Make sure that the outer diameter of the wire coating is

smaller than the inner diameter of the insulation sleeve of

the recommended ferrule.

2. Make sure that the ferrule processing dimensions conform

to the following figures.

Recommended Flat-blade Screwdriver

Use a flat-blade screwdriver to connect and remove wires.

Use the following flat-blade screwdriver.

The following table shows manufacturers and models as of 2015/Dec.

*OMRON's exclusive purchase model XW4Z-00B is available to

order as SZF 0-0.4 × 2.5 (manufactured by Phoenix Contact).

Release hole

Terminal (insertion) hole

Release hole

Terminal (insertion) hole

Ferrules or solid wires

Flat-blade

screwdriver

10 to15°

Stranded wires

Applicable

wire

Ferrule

Conductor

Length

(mm)

Stripping

length

(mm)

(Ferrules

used)

Recommended ferrules

(mm

)(AWG)

Phoenix Contact

product

Weidmuller

product

Wago product

0.5 20 8 10 AI 0.5-8 H0.5/14

FE-0.5-8N-WH

10 12 AI 0.5-10 H0.5/16

FE-0.5-10N-WH

0.75 18 8 10 AI 0.75-8 H0.75/14

FE-0.75-8N-GY

10 12 AI 0.75-10 H0.75/16

FE-0.75-10N-GY

1/1.25 18/17

8 10 AI 1-8 H1.0/14 FE-1.0-8N-RD

10 12 AI 1-10 H1.0/16

FE-1.0-10N-RD

1.25/1.5

17/16

8 10 AI 1.5-8 H1.5/14 FE-1.5-8N-BK

10 12 AI 1.5-10 H1.5/16

FE-1.5-10N-BK

Recommended crimp tool

CRIMPFOX6

CRIMPFOX6T-F

CRIMPFOX10S

PZ6 roto Variocrimp4

Model Manufacturer

SZS 0.4×2.5

SZF 0-0.4×2.5 *Phoenix Contact

ESD0.40×2.5 Wera

0.4×2.5×75 302 Wiha

AEF.2.5×75 Facom

210-719 Wago

SDI 0.4×2.5×75 Weidmuller

10 to 15°

Wire

Flat-blade

screwdriver

8 to 10 mm

1.9 mm max. 2.6 mm max.

Side

0.4 mm

2.5 mm dia.

2.5 mm

Front

Terms and Conditions Agreement

Read and understand this catalog.

Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have

any questions or comments.

Warranties.

(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship

for a period of twelve months from the date of sale by Omron (or such other period expressed in writing

by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT

NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE

PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL

SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.

Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products

or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at Omron’s election,

to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the

non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price

of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other

claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored,

installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or

unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system

assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in

writing, are not to be construed as an amendment or addition to the above warranty.

See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.

Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.

Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the

combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable

third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is

not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system,

or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with

respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE

QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,

AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.

Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof.

Performance Data.

Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining

suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it

to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.

Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice

to change part numbers when published ratings or features are changed, or when significant construction changes are made.

However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be

assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to

confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is

assumed for clerical, typographical or proofreading errors or omissions.

Authorized Distributor:

In the interest of product improvement,

specifications are subject to change without notice.

Cat. No. J120-E1-030916 (0100)

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC

2895 Greenspoint Parkway, Suite 200

Hoffman Estates, IL 60169 U.S.A.

Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional Headquarters

OMRON EUROPE B.V.

Wegalaan 67-69, 2132 JD Hoofddorp

The Netherlands

Tel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.com

Kyoto, JAPAN

OMRON ASIA PACIFIC PTE. LTD.

No. 438A Alexandra Road # 05-05/08 (Lobby 2),

Alexandra Technopark,

Singapore 119967

Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Zhong Road,

PuDong New Area, Shanghai, 200120, China

Tel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

CSM_11_1_0317