EME05 Series AC-DC Power Supplies 5 Watts * Compact Size * Medical Approvals * 2 MOPP * Single Outputs from 3.3 to 48 V * PCB Mount * Encapsulated & Open Frame * Class II * Peak Load Capability POWER GREEN * 3 Year Warranty Dimensions: The EME05 is a series of open frame and encapsulated AC-DC single output power supplies designed for medical applications. The series provides two mechanical options including open frame and encapsulated PCB mount. With approvals to world-wide medical safety standards, compliance with class B for both conducted and radiated emissions and a 130%, 30s peak load capability, these class II isolation parts benefit system designers with easy integration into the latest healthcare products and applications. EME05: 1.50 x 1.00 x 0.60" (36.1 x 25.4 x 15.2 mm) EME05-P: 1.40 x 0.94 x 0.69" (35.6 x 23.7 x 17.6 mm) Models & Ratings Output Power Output Voltage Output Current Nominal Peak (1) Model Number (2) 5W 3.3 VDC 1510 mA 1960 mA EME05US03 5W 5.0 VDC 1000 mA 1300 mA EME05US05 5W 9.0 VDC 555 mA 722 mA EME05US09 5W 12.0 VDC 416 mA 541 mA EME05US12 5W 15.0 VDC 333 mA 433 mA EME05US15 5W 24.0 VDC 208 mA 270 mA EME05US24 5W 36.0 VDC 138 mA 180 mA EME05US36 5W 48.0 VDC 104 mA 135 mA EME05US48 Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal. 2. For Open Frame version add suffix -P to model number, e.g. EME05US12-P. Summary Characteristic Input Voltage Range Minimum 85 No Load Input Power 1 Typical Maximum Units Notes & Conditions 264 VAC Derate from 100% at 90 VAC to 90% at 85 VAC 0.3 W Efficiency 72 86 % Operating Temperature -25 +70 C Derate linearly from 100% at +50 C to 50% at +70 C EMC EN55011 Level B Conducted & Radiated, EN601000-3-2, EN61000-3-3, EN60601-1-2 Safety Approvals EN60601-1, ANSI/AAMI ES60601-1. IEC60601-1 www.xppower.com EME05 Series AC-DC Power Supplies Input Characteristic Input Voltage Range Input Frequency Input Current - Full Load No Load Input Power Inrush Current Earth Leakage Current Input Protection Minimum 85 47 Typical Units VAC Hz A rms W A Notes & Conditions Notes & Conditions 0.5 1 Units VDC % A s ms ms % % 4 % 50 90 120 200 140 200 mV pk-pk mV pk-pk mV pk-pk mV pk-pk % Vnom % 0.05 %/C Maximum Units % VAC kHz W/in3 kHrs lb (g) lb (g Maximum 264 63 0.10/0.06 0.3 40 At 115/230 VAC At 230 VAC Class II construction no earth Internal T1.0 A/250 VAC fuse fitted in line and neutral Output Characteristic Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Minimum 3.3 Typical Maximum 48 1 0 2 14 12 Transient Response Ripple & Noise Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient 115 130 No minimum load required at full load and 115 VAC Deviation, recovery within 1% in less than 500 s for a 25% load change 3.3-5 V versions, 20 MHz bandwidth 9 V versions, 20 MHz bandwidth 12-15 V versions, 20 MHz bandwidth 24-48 V versions, 20 MHz bandwidth Recycle input to reset Trip & Restart (hiccup mode) General Characteristic Efficiency Isolation: Input to Output Switching Frequency Power Density Mean Time Between Failure Minimum Typical 80 4000 130 5.5 >400 0.03 (14) 0.053 (24) Weight Notes & Conditions 2 x MOPP MIL-HDBK-217F, +25 C GB Open frame versions (-P) Encapsulated version Efficiency Graphs EME05US12 EME05US24 90% 90% 80% 80% y 100% 70% 70% E Efficiency 100% 60% 50% 40% 115Vac input 230Vac input 60% 50% 10 20 30 40 50 60 70 80 90 100 40% 10 20 Load (%) 30 40 50 60 70 80 90 100 Load (%) www.xppower.com 2 EME05 Series AC-DC Power Supplies Environmental Characteristic Maximum Units Operating Temperature Minimum -25 Typical +70 C Storage Temperature -40 +85 C 95 %RH 3048 m Notes & Conditions Derate linearly from 100% at +50 C to 50% at +70 C Cooling Convection-cooled Humidity Operating Altitude Non-condensing Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle EMC: Emissions Phenomenon Standard Test Level Conducted EN55011 Class B Radiated EN55011 Class B Harmonic Current EN61000-3-2 Voltage Flicker EN61000-3-3 Criteria Notes & Conditions Class A EMC: Immunity Test Level Criteria Medical Device EMC Phenomenon IEC60601-1-2 Standard Ed 4.0: 2014 As below ESD EN61000-4-2 8kV contact, 15kV air discharge A Radiated EN61000-4-3 10 V/m A EFT EN61000-4-4 3 A Surge EN61000-4-5 2 A Conducted EN61000-4-6 10 Vrms A Magnetic Fields EN61000-4-8 30 A/m A 70% UT (70 VAC) for 500 ms A 40% UT (40 VAC) for 100 ms A <5% UT (0 VAC) for 10 ms A <5% UT (0 VAC) for 5000 ms B 70% UT (168 VAC) for 500 ms A 40% UT (96 VAC) for 100 ms A EN60601-1-2 (100 VAC) Dips and Interruptions EN60601-1-2 (240 VAC) <5% UT (0 VAC) for 10 ms A <5% UT (0 VAC) for 5000 ms B Notes & Conditions 80% mod, 80 MHz - 2.7 GHz plus discrete communcation proximity field frequencies Load de-rated to 50% Safety Approvals 3 Safety Agency Safety Standard Notes & Conditions CB Report IEC60601-1 Including Risk Management Medical UL ANSI/AAMI ES60601-1:2005 & CSA C22.2, No.60601-1:08 Medical TUV EN60601-1 Medical Means of Protection Category Primary to Secondary 2 x MOPP (Means of Patient Protection) IEC60601-1 Ed 3.1 www.xppower.com EME05 Series AC-DC Power Supplies Mechanical Details Encapsulated BOTTOM VIEW 1.0 (25.4) 0.20 (5.1) 0.75 (19.05) 0.10 (2.53) 2 1.50 (38.1) 0.60 (15.2) 1 4 O0.04 (O1.02) 1.30 (33.02) 0.10 (2.54) 3 4 0.10 (2.53) 0.5 (12.7) Pin Connections Open Frame (-P) 0.50 (12.7) 1.40 (35.6) 0.120 3.05 0.750 19.05 2 0.05 (1.28) 3 Pin Single 1 ACN 2 ACL 3 -Vout 4 +Vout 0.94 (23.7) 4 1 0.37 (9.40) 1.30 (33.02) 0.51 (13.0) max 0.69 (17.6) O0.039 (O1.00) O0.071 (O1.80) 0.08 2.0 max 0.15 (3.8) 0.17 (4.4) Notes 1. Dimensions in inches (mm). 2. Weight: Open frame versions (-P): 0.03 lbs (14 g) Encapsulated: 0.053 lbs (24 g)) 3. Tolerances: www.xppower.com x.xx = 0.02 (x.x = 0.5) x.xxx = 0.01 (x.xx = 0.25) 23 Feb 16