REVISION 27
APRIL 13, 2014 1 ©2014 Integrated Devi ce Technology, Inc.
Default Frequency and VCXO Pull Range
Order Information for Ceramic 5x7 Devices
ORDERING INFORMATION
Ordering Information for FemtoClock® NG Ceramic-Package XO and VCXO Products
The programmable VCXO and XO devices support a variety of
devices options such as the output type, number of default frequen-
cies, internal crystal frequency, power supply voltage, ambient
temperature range and the frequency accuracy. The device options,
default frequencies and VCXO pull range must be specified at the
time of order and are programmed by IDT before the shipment. Table
1 specifies the available order codes including the device options.
Table 2 to Table 4 specify the default frequency configurations.
Example part number: order code 8N3QV01FD-0001CDI specifies a
programmable, quad default-frequency VCXO with a voltage supply
of 2.5V, a LVPECL output, a 50ppm crystal frequency accuracy,
contains a 114.285MHz internal crystal as frequency source,
industrial temperature range, a lead-free (6/6 RoHS) 10-lead ceramic
5mm x 7mm x 1.55mm package and is factory-programmed to the
default frequencies of 100MHz, 122.88MHz, 125MHz and
156.25MHz and to the VCXO pull range of min. 100ppm. The
default frequency configuration is found in table 1.
Other default frequencies and order codes are available from IDT on
request.
Look up default frequencies from Tables 2, 3 and 4 by using the
left-most frequency column for single-frequency devices, the two
left-most columns for dual and all four columns for quad-frequency
devices, respectively.
Table 1. Order Codes
Shipping Package
8: Tape & Reel
(no letter): Tray
Ambient Temperature Range
“I”: Industrial: (TA = -40°C to 85°C)
(no letter): (TA = 0°C to 70°C)
Package Code
CD: Lead-Free, 6/10-lead ceramic 5mm x 7mm x 1.55mm
Die Revision
H
Option Code (Supply Voltage and Frequency-Stability)
A: VCC = 3.3V±5%, ±100ppm
B: VCC = 2.5V±5%, ±100ppm
E: VCC = 3.3V±5%, ±50ppm
F: VCC = 2.5V±5%, ±50ppm
K: VCC = 3.3V±5%, ±20ppm
L: VCC = 2.5V±5%, ±20ppm
Default-Frequency and VCXO Pull Range
See document FemtoClock NG Ceramic-Package XO and VCXO
Ordering Product Information.
Last digit = L: configuration pre-programmed and not changeable
dddd fXTAL (MHz) PLL feedback Use for Table
0000 to 0999 114.285 Fractional VCXO, XO 2
1000 to 1999 100.000 Integer XO 3
2000 to 2999 Fractional XO 4
FemtoClock NG
I/O Identifier
0: LVCMOS
3: LVPECL
4: LVDS
Number of Default Frequencies
S: 1: Single
D: 2: Dual
Q: 4: Quad
Part Number
Function #Pins OE fct. at
pin
001 XO 10 OE@2
003 XO 10 OE@1
V01 VCXO 10 OE@2
V03 VCXO 10 OE@1
V75 VCXO 6 OE@2
V76 VCXO 6 nOE@2
V85 VCXO 6 —
085 XO 6 OE@1
270 XO 6 OE@1
271 XO 6 OE@2
272 XO 6 nOE@2
273 XO 6 nOE@1
8N X X XXX X X - dddd XX X X
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 2 ©2014 Integrated Devi ce Technology, Inc.
Table 2. Default Frequencies and Ordering Information for fXTAL= 114.285MHz
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Pull Range (ppm)
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
0001 125 100 122.88 156.25 ±100
0002 1228.8 983.04 614.14 491.52 ±100
0003 622.08 625 666.5143 669.3266 ±100
0004 622.08 625 161.1328 167.3365 ±100
0005 622.08 625 644.5313 693.4830 ±100
0006 622.08 625 657.4219 707.3527 ±100
0007 622.08 666.5143 669.3266 672.1627 ±100
0008 644.5313 669.3266 657.4219 707.3527 ±100
0009 148.5 148.35165 74.25 74.175824 ±100
0010 622.08 644.5313 669.3266 672.16 ±100
0011 622.08 644.5313 669.3266 693.483 ±100
0012 672.1627 696.4215 672.1627 696.4215 ±100
0013 622.08 672.1627 696.4217 715.5389 ±200
0014 625 312.5 156.25 125 ±100
0015 156.25 187.5 200 250 ±100
0016 100 125 155.52 156.25 ±100
0017 622.08 669.3266 644.5313 693.483 ±200
0018 212.5 250 300 312.5 ±100
0019 155.52 161.132 669.3266 693.483 ±100
0020 106.25 125 156.25 212.5 ±100
0021 164.3555 164.3555 164.3555 164.3555 ±500
0022 176.8382 176.8382 176.8382 176.8382 ±500
0023 707.3527 707.3527 707.3527 707.3527 ±500
0024 100 125 156.25 250 ±100
0025 25 25 19.44 19.44 ±100
0026 311.04 311.04 311.04 311.04 ±100
0027 400 400 400 400 ±100
0028 156.25 156.25 156.25 156.25 ±100
0029 155.52 155.52 155.52 155.52 ±300
0030 312.5 312.5 312.5 312.5 ±100
0031 80 100 125 156.25 ±100
0032 76.8 19.2 19.2 76.8 ±100
0033 100 125 156.25 250 ±100
0034 155.52 167.3316 669.3266 172.5607 ±100
0035 155.52 156.25 128.78788 159.375 ±100
0036 100 125 250 312.5 ±100
0037 500 125 250 1000 ±100
0038 155.52 166.62857 627.32962 649.97033 ±50
0039 148.5 125 200 100 ±100
0040 622.08 669.3266 622.08 669.3266 ±200
0041 693.483 707.3527 693.483 707.3527 ±350
0042 644.5313 657.42 644.5313 657.42 ±350
0043 496 496 496 496 ±50
0044 125 100 155.52 166.628571 ±100
0045 100 125 100 125 ±100
0046 200 50 100 125 ±50
0047 24.576 125 148.5 143.35164 ±100
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 3 ©2014 Integrated Devi ce Technology, Inc.
0048 159.375 155.52 106.25 133.33 ±100
0049 150 75 300 150 ±100
0050 622.08 155.52 644.5313 669.3266 ±100
0051 672.1562 696.4375 710.3125 710.3125 ±100
0052 425 212.5 106.25 159.375 ±100
0053 160 160 160 160 ±125
0054 25 33.33 50 62.5 ±100
0055 156.25 125 100 25.175 ±100
0056 125 66.66 30.72 50 ±100
0057 155.52 77.76 38.88 156.25 ±100
0058 669.3266 669.3266 669.3266 669.3266 ±100
0059 644.5313 644.5313 644.5313 644.5313 ±100
0060 622.08 622.08 622.08 622.08 ±100
0061 693.483 693.483 693.483 693.483 ±100
0062 150 125 155.52 311.04 ±100
0063 24 39.4 48 64 ±100
0064 106.25 100 106.25 100 ±100
0065 212.5 212.5 212.5 212.5 ±100
0066 122.88 122.88 122.88 122.88 ±100
0067 192 192 192 192 ±175
0068 161.1328 161.1328 161.1328 161.1328 ±100
0069 250 250 250 250 ±100
0070 24.576 200 225 250 ±100
0071 622.08 672.1627 644.5313 696.6149 ±87.5
0072 622.08 666.514286 627.32962 649.970332 ±100
0073 312.5 156.25 125 100 ±100
0074 100 106.25 100 106.25 ±100
0075 150 75 150 75 ±100
0076 200 200 200 200 ±100
0077 125 156.25 322.265625 125 ±100
0078 100 200 300 400 ±100
0079 328.125 322.265625 125 162.5 (TBD) ±100
0080 125 125 125 125 ±100
0081 125 156.25 250 312.5 ±100
0082 622.08 156.25 155.52 125 ±100
0083 160 160 160 160 ±300
0084 622.08 669.3266 622.08 669.3266 ±300
0085 160 160 160 160 ±225
0086 350 350 350 350 ±100
0087 161.1328 155.52 156.25 156.25 ±150
0088 156.25 156.25 156.25 156.25 ±100
0089 155.52 155.52 155.52 155.52 ±100
0090 159.375 133.33 106.25 187.5 ±100
0091 70.656 35.328 70.656 35.328 ±100
0092 148.5 148.351648 74.25 74.175824 ±100
0093 737.28 737.28 737.28 737.28 ±300
0094 20 44.736 51.84 125 ±100
0095 100 125 133 156.25 ±100
Table 2. Default Frequencies and Ordering Information for fXTAL= 114.285MHz
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Pull Range (ppm)
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 4 ©2014 Integrated Devi ce Technology, Inc.
0096 100 100.3 100 100.3 ±100
0097 38.88 38.88 38.88 38.88 ±100
0098 130 100 80 25 ±100
0099 187.5 250 287.5 312.5 ±100
0100 100 195.3125 200.717 203.768 ±100
0101 125 156.25 192 225 ±150
0102 25 50 100 125 ±100
0103 240 240 240 240 ±100
0104 425 425 425 425 ±100
0105 110 110 110 110 ±100
0106 125.009375 150 312.25 156.25 ±100
0107 187.5 150 300 300 ±100
0108 100 100 100 100 ±100
0109 156.25 155.52 100 150 ±100
0110 25 38.88 44.736 100 ±100
0111 500 500 500 500 ±100
0112 156.25 161.1328 156.25 161.1328 ±100
0113 156.25 175 200 312.5 ±100
0114 300 350 400 533 ±100
0115 175 175 175 175 ±100
0116 70.656 35.328 70.656 35.328 ±50
0117 156.25 100 125 312.5 ±100
0118 100 100 100 100 ±100
0119 533 400 350 200 ±100
0120 166.6667 166.6667 166.6667 166.6667 ±100
0121 180 180 180 180 ±100
0122 320 320 320 320 ±100
0123 669.326582 693.482991 669.326582 693.482991 ±100
012475757575 ±100
0125 622.08 672.16271 622.08 672.16271 ±295
0126 19.2 38.4 26 52 ±100
0127 25 33.3333 50 125 ±100
0128 25 33.3333 62.5 125 ±100
0129 187.5 187.5 187.5 187.5 ±100
0130 174.8 174.8 174.8 174.8 ±100
0131 114.285 114.285 114.285 114.285 ±100
0132 496 496 496 496 ±100
0133 480 480 480 480 ±100
0134 100 156.25 250 312.5 ±100
0135 25 40 50 100 ±100
0136 100 312.5 100 312.5 ±100
0137 155.52 155.52 155.52 155.52 ±237
0138 148.5 148.351 27 74.1758 ±100
0139 170 200 220 250 ±100
0140 133.333333 140 146.666666 153.333333 ±100
0141 156.25 133.3333 137.5 156.25 ±100
0142 120 120 120 120 ±100
0143 81 135 270 108 ±100
Table 2. Default Frequencies and Ordering Information for fXTAL= 114.285MHz
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Pull Range (ppm)
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 5 ©2014 Integrated Devi ce Technology, Inc.
0144 100 125 156.25 200 ±250
0145 100 200 333 400 ±100
0146 100 95 105 125 ±100
0147 100 400 1000 1000 ±100
0148 231.25 231.25 231.25 231.25 ±100
0149 350 312.5 175 156.25 ±100
0150 100 400 1000 250 ±100
0151 150 156.25 212.5 150 ±100
0152 328.125 322.265625 125 265.625 ±100
0153 100 40.5 67.5 135 ±100
0154 50 50 50 50 ±100
0155 100 83.33 100 83.33 ±100
0156 121.109 121.109 121.109 121.109 ±100
0157 100 100.011 99.989 100.022 ±100
0158 166.62875 166.62875 166.62875 166.62875 ±100
0159 100 156.25 212.5 106.25 ±100
0160 155.52 155.52 155.52 155.52 ±75
0161 212 212 212 212 ±137.5
0162 100 98 102 99 ±100
0163 81 135 270 108 ±100
0164 156.25 312.5 125 250 ±100
0165 100 110 125 130 ±100
0166 100 95 105 125 ±100
0167 98 99 102 100 ±100
0168 74.25 74.174 74.25 74.174 ±100
0169 148.5 148.35 148.5 148.35 ±100
0170 100 106.25 125 300 ±100
0171 622.08 644.5313 622.08 644.5313 ±587.5
0172 287.5 287.5 287.5 287.5 ±100
0173 156.2523 156.25 156.2328 156.2281 ±100
0174 136 155 400 450 ±100
0175 100 125 122.88 153.6 ±100
0176 345 172.5 100 125 ±100
0177 1124 1152 1128 1130 ±100
0178 800 800 800 800 ±87.5
0179 62.5 200 62.5 200 ±100
0180 78.125 78.125 78.125 78.125 ±100
0181 66.00 66.00 66.00 66.00 ±100
0182 644.5313 698.8123 672.1627 696.6149 ±20
0183 644.5313 698.3266 693.4830 438.2813 ±20
0184 156.25 156.25 156.25 156.25 ±350
0185 156.25 156.25 156.25 156.25 ±750
0186 622.08 622.08 622.08 622.08 ±350
0187 622.08 622.08 622.08 622.08 ±750
0188 533.33333 450 400 200 ±100
0189 26.9865 26.9865 27 26.973 ±750
0190 245.76 245.76 245.76 245.76 ±100
0191 148.35165 148.5 148.351648 148.5 ±100
Table 2. Default Frequencies and Ordering Information for fXTAL= 114.285MHz
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Pull Range (ppm)
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 6 ©2014 Integrated Devi ce Technology, Inc.
NOTE: Other default frequencies can be obtained from IDT on request.
NOTE: Pull range is only applicable to VCXO devices. When ordering a XO device, the pull range can be ignored.
NOTE: Default pull range is: ±100ppm.
0192 540 828 1242 1278 ±350
0193 133.0000 133.0000 133.0000 133.0000 133.0000
0195 50.0000 200.0000 156.2500 390.6250 ±100
0196 102.4000 50.0000 100.0000 125.0000 ±100
0197 200.0000 200.0000 200.0000 200.0000 ±137.5
0198 156.2500 135.0000 156.2500 135.0000 ±200
0199 25.0000 25.0000 25.0000 25.0000 ±125
0200 156.2500 156.2500 156.2500 156.2500 ±125
0201 153.6000 125.0000 153.6000 125.0000 ±90
0202 156.2500 125.0000 156.2500 125.0000 ±90
0203 698.8120 706.1806 698.8120 706.1806 ±500
0204 191.1250 125.0000 191.1250 125.0000 ±90
0205 155.5200 153.6000 155.5200 153.6000 ±90
0206 100.8000 100.0000 125.0000 156.2500 ±100
0207 100.0000 125.0000 156.2500 300.0000 ±100
Table 2. Default Frequencies and Ordering Information for fXTAL= 114.285MHz
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Pull Range (ppm)
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 7 ©2014 Integrated Devi ce Technology, Inc.
Table 3. Default Frequency Ordering Information for fXTAL= 100.000MHz, Integer Feedback PLL
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
1014 625 312.5 156.25 125
1015 156.25 187.5 200 250
1018 212.5 250 300 312.5
1020 106.25 125 156.25 212.5
1024 100 125 156.25 250
1027 400 400 400 400
1028 156.25 156.25 156.25 156.25
1030 312.5 312.5 312.5 312.5
1031 80 100 125 156.25
1033 100 125 156.25 250
1034 16 75 166 300
1036 100 125 250 312.5
1037 500 125 250 1000
1043 496 496 496 496
1045 100 125 100 125
1046 200 50 100 125
1049 150 75 300 150
1052 425 212.5 106.25 159.375
1053 160 160 160 160
1054 25 33.33 50 62.5
1064 106.25 100 106.25 100
1065 212.5 212.5 212.5 212.5
1069 250 250 250 250
1073 312.5 156.25 125 100
1074 100 106.25 100 106.25
1075 150 75 150 75
1076 200 200 200 200
1077 135 135 135 135
1078 100 200 300 400
1079 148.5 148.5 148.5 148.5
1080 125 125 125 125
1086 350 350 350 350
1088 156.25 156.25 156.25 156.25
1095 100 125 133 156.25
1098 130 100 80 25
1099 187.5 250 287.5 312.5
1102 25 50 100 125
1103 240 240 240 240
1104 425 425 425 425
1105 110 110 110 110
1107 187.5 150 300 300
1108 100 100 100 100
1111 500 500 500 500
1113 156.25 175 200 312.5
1114 300 350 400 533
1115 175 175 175 175
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 8 ©2014 Integrated Devi ce Technology, Inc.
NOTE: Other default frequencies can be obtained from IDT on request.
NOTE: The default frequency codes 1000 to 1999 are implemented with integer-only PLL dividers and are only applicable to XO devices.
1118 100 100 100 100
1120 166.6667 166.6667 166.6667 166.6667
1121 180 180 180 180
1122 320 320 320 320
1124 75 75 75 75
1127 25 33.3333 50 125
1128 25 33.3333 62.5 125
1129 187.5 187.5 187.5 187.5
1133 480 480 480 480
1134 100 156.25 250 312.5
1135 25 40 50 100
1136 100 312.5 100 312.5
1141 156.25 133.3333 137.5 156.25
1142 120 120 120 120
1145 100 200 333 400
1146 100 95 105 125
1147 100 400 1000 1000
1149 350 312.5 175 156.25
1150 100 400 1000 250
1151 150 156.25 212.5 150
1153 100 40.5 67.5 135
1154 50 50 50 50
1155 100 83.33 100 83.33
1164 156.25 312.5 125 250
1165 100 110 125 130
1166 100 95 105 125
1172 287.5 287.5 287.5 287.5
1178 156.25 156.25 156.25 156.25
1179 62.5 200 62.5 200
1180 78.125 78.125 78.125 78.125
1181 66.00 66.00 66.00 66.00
1189 26.9865 26.9865 27 26.973
1196 102.4000 50.0000 100.0000 125.0000
1197 100.0000 125.0000 156.2500 212.5000
1198 125.0000 150.0000 250.0000 300.0000
1199 206.2500 206.2500 206.2500 206.2500
1207 100.0000 125.0000 156.2500 300.0000
Table 3. Default Frequency Ordering Information for fXTAL= 100.000MHz, Integer Feedback PLL
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
REVISION 27
APRIL 13, 2014 9 ©2014 Integrated Devi ce Technology, Inc.
NOTE: Other default frequencies can be obtained from IDT on request.
NOTE: The default frequency codes 2000 to 2999 are implemented with fractional PLL dividers and are only applicable to XO devices with fXTAL=100.000MHz.
Table 4. Default Frequency Ordering Information for fXTAL= 100.000MHz, Fractional Feedback PLL
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
2002 1228.8 983.04 614.14 491.52
2060 622.08 622.08 622.08 622.08
2066 122.88 122.88 122.88 122.88
2148 231.25 231.25 231.25 231.25
2163 81 135 270 108
2174 136 155 400 450
2175 100 125 122.88 153.6
2176 345 172.5 100 125
2177 1124 1152 1128 1130
2180 78.125 78.125 78.125 78.125
2181 66.00 66.00 66.00 66.00
2182 644.5313 698.8123 672.1627 696.6149
2183 644.5313 669.3266 693.4830 438.2813
2188 533.33333 450 400 200
2189 26.9865 26.9865 27 26.973
2190 245.76 245.76 245.76 245.76
2191 148.35165 148.5 148.351648 148.5
2193 133.0000 133.0000 133.0000 133.0000
2194 174.703084 174.703084 174.703084 174.703084
2195 50.0000 200.0000 156.2500 390.6250
2197 257.8125 250.0000 312.5000 175.000
2199 25.0000 26.6000 27.0000 32.0000
2200 25.0000 37.0560 78.0000 104.0000
2201 100.0000 156.2500 161.1330 174.7030
Ordering Information Default Frequency and VCXO Pull Range Order Information for Ceramic 5x7 Devices
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document,
including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not
guaranteed to perform the same way whe n installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the
suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This doc ument is presented only as a guide and does not convey any
license under intellectual property rights of IDT or any third parties.
IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to signifi-
cantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are r egistered trademar ks of ID T. Other tra demar ks and ser vice mar ks used here in, including protected names, logos and designs, ar e the property of I DT or the ir respe ctive third
party owners.
Copyright 2014. All rights reserved.
6024 Silver Creek Valley Road
San Jose, California 95138 Sales
800-345-7015 (inside USA)
+408-284-8200 (outside USA)
Fax: 408-284-2775
www.IDT.com/go/contactIDT
Technical Support
netcom@idt.com
+480-763-2056
We’ve Got Your Timing Solution
Table 5. Default Frequency Ordering Information for fXTAL= 100.000MHz,
Non-Changeable XO Configurations
Code (dddd) Default Frequencies (MHz)
Single Frequency
Devices
Dual Frequency Devices
FSEL = 0 FSEL = 1
Quad Frequency Devices
FSEL[1:0] = 00 FSEL[1:0] = 01 FSEL[1:0] = 10 FSEL[1:0] = 11
101L 625 312.5 156.25 125
102L 106.25 212.5 75 150
105L 100 125 150 156.25
203L 622.08 155.52 644.5313 669.3266
204L 156.25 161.1328125 187.5 155.52
